Hello,
I have AL10C00B182 ROM - ota upgrade after start use the phone.
Now I have two question:
Can I upgrade from AL10C00B182 to B353 without any other upgrades (dload method)?
Thank!
since u got the OTA to B182, im guessing ure on full stock with locked bootload and no root so in that case, installation of B353 via dload method is no problem. enjoy!
Thank you.
Now I'm on 353 (AL10) with unlocked bootloader.
I'll instal TWPR (EMUI 4.1) with decryption support and them what..?
1. install superSU
2. Have to I do wipe system or with decryption support is not nesesery?
Clean ROM with root is all I need Maybe KangVIP
hello,
May I ask how did you update your AL10C00B182 to B353?
I just had the phone for 2 days and tried checking for updates, but no updates so far.
Thank you.
bodzio3333 said:
Thank you.
Now I'm on 353 (AL10) with unlocked bootloader.
I'll instal TWPR (EMUI 4.1) with decryption support and them what..?
1. install superSU
2. Have to I do wipe system or with decryption support is not nesesery?
Clean ROM with root is all I need Maybe KangVIP
Click to expand...
Click to collapse
wellit depends what u want. if u want to stay on B353 stock and u only want root, flashing supersu is enough. otherwise go ahead and flash kangvip slim via twrp, it comes prerooted so you should be fine
Sent from my Huawei Mate 8 NXT-AL10
shackks said:
hello,
May I ask how did you update your AL10C00B182 to B353?
I just had the phone for 2 days and tried checking for updates, but no updates so far.
Thank you.
Click to expand...
Click to collapse
I had the phone for 3 days
Update is very easy:
- download the ROM - zip file,
- extract update.app from it,
- copy the UPDATE.APP to the internal memory in a folder called - dload (you may have to create it),
- power off phone,
- press [volume+]+ [volume-]+[power] together to force the update,
- done
Please check somethink:
In dialer * # * # 2846579 # * # * Enter and then 3 - Network Information and then on 4 - Vendor Country Info
Here you will find a following entries:
I have Vendor: all
Country: cn
differet that this:
cust eu = C432 - Europe
cust specseas = C636 - Asia
cust meanaf = C185 - Africa / Middle East
cust ru = C10 Russian
I bught phone from Spemall with unlocked bootloader.
jbmc83 said:
wellit depends what u want. if u want to stay on B353 stock and u only want root, flashing supersu is enough. otherwise go ahead and flash kangvip slim via twrp, it comes prerooted so you should be fine
Sent from my Huawei Mate 8 NXT-AL10
Click to expand...
Click to collapse
I suppose stay on B353 stock. I flashed supersu, reboot and its done ? Any wipe? I read that I have to do format system... Maybe too much info.
Ok. I have B353 stock with root and I want too upgrade my phone, so now I have to change twpr too stock and dload, yes ?
bodzio3333 said:
I had the phone for 3 days
Update is very easy:
- download the ROM - zip file,
- extract update.app from it,
- copy the UPDATE.APP to the internal memory in a folder called - dload (you may have to create it),
- power off phone,
- press [volume+]+ [volume-]+[power] together to force the update,
- done
Please check somethink:
In dialer * # * # 2846579 # * # * Enter and then 3 - Network Information and then on 4 - Vendor Country Info
Here you will find a following entries:
I have Vendor: all
Country: cn
differet that this:
cust eu = C432 - Europe
cust specseas = C636 - Asia
cust meanaf = C185 - Africa / Middle East
cust ru = C10 Russian
I bught phone from Spemall with unlocked bootloader.
Click to expand...
Click to collapse
Thanks for the reply bodzio3333,
I shall do it this way later on. But, why do we have to check the region code? I'm having the same country info as yours.
Hi all,
I'm from Thailand. I made SRK Tool for LG G2 and G3[TOOL] SRK Tool 2.1 [ROOT/UNBRICK/UTILITY/BACKUP]- 20150507 and now I'm a new user for Huawei forum. I'm planing to develop my SRK Tool for Huawei phone, and this is a first look
Support me , donate with my email paypal : [email protected]
Build name : Lod-Chong (Thai Food) 2.0 - 20161002
- Add Changing oeminfo and custom.bin (Honor8 AL10,C10,DL00)
- Add Changing oeminfo and custom.bin (P9 Lite DL00,L31C432,L21C185,L22C636,L21C10)
Build name : Luk-chub (Thai Food) 1.9 - 20160929
- Add Changing oeminfo and custom.bin (Honor8 L09C432)
- Add install TWRP/Stock/ROOT Honor8
(Thanks Paul O'Brien for TWRP
http://www.modaco.com/forums/topic/377647-twrp-recovery-3020-for-honor-8/
)
- Add Utility FASTBOOT RECOVERY,BOOT AND SYSTEM for easy to unbrick
Build name : Panang-Kai (Thai Food) 1.8 - 20160904
- Add Changing oeminfo and custom.bin (P8 Max)
- Add Utility Install cust(cust.img) partitions (Mate 8)
Build name : Khanom-Chan (Thai Food) 1.7 - 20160812
- Add Changing oeminfo and custom.bin (VIE-L29 P9 Plus-C185)
- Add Changing oeminfo and custom.bin (P8-C636,UL10C00)
- Add install TWRP/Stock Huawei P8
- Add Root For another Huawei devices that need SYSTEMLESS=true such as P8
Build name : Som-Tum-Thai (Thai Food) 1.6 - 20160723
- Add TWRP+ROOT Huawei P9 Lite Credit : [email protected]
- Add TWRP+ROOT Huawei Medaipad X2 (Marshmallow,Lollipop)
Credit : Eennap [email protected] Mediapad X1 & X2 fan page - Thailand
- Add Changing oeminfo and custom.bin (Huawei P9-AL10) Credit : [email protected]
- Update TWRP for Huawei P9 to the lastest version (2016-05-31 19:38:42 +0100 by Paul O'Brien)
Build name : Pad-Thai (Thai Food) 1.5 - 20160717
- Add Changing oeminfo and custom.bin (P9Plus:L09C432)
- Add install Stock Recovery/TWRP P9 plus
- Add Root P9 Plus
- Add Support 2 modes (fastboot and debugging mode) for Unlock/Relock bootloader,Install TWRP
Build name : Tom-Yum-Kung (Thai Food) 1.4 - 20160626
- Add Changing oeminfo and custom.bin
(P9:L19C185,P9Plus:AL10 and L29C636)
STABLE 1.3 - 20160619
- Add Utility Changing oeminfo and custom.bin (Huawei P9[C636,C432)])
- Add Utility install /data/hw_init(Mate8,P9,P9 Plus)
STABLE 1.2 - 20160609
- Add Utility Changing build.prop parameter ro.build.display.id, Comfortable to debrand
- Add Utility Reboot system
STABLE 1.1 - 20160605
- Fixed a little bug for root
- Add Install Recovery 6.0 , Support EMUI 4.1 - Mate 8
STABLE 1.0 - 20160521
- Fixed Root and support only Mate7,8,Honor6,6+,7,7+,P9
- Fixed Backup oeminfo
- Add TWRP for Honor7,7+
- Add Utility Bootloader status checking
- Add Utility Reboot to erecovery
- Add Utility dumpsys deviceidle disable (Disable Doze)
- Add Utility dumpsys deviceidle enable (Enable Doze)
- Add Utility Changing oeminfo and custom.bin (Huawei Mate8)
- Add Utility Changing oeminfo and custom.bin (Huawei Mate7)
- Add Restore oeminfo and custom.bin(Can apply for install oeminfo and custom.bin
for all Huawei Phone)
- Optimize size of tool
Beta 04.10 - 20160507
- Add install TWRP Huawei P9
Beta 04 - 20160507
- Fixed Root
- change backup oeminfo.img to oeminfo
Beta 03 - 20160504
- Add root support All huawei phone
- Add install TWRP honor6+
- Add backup oeminfo/custom.bin
- Add Utility/List all partition in huawei device
Beta 02 - 20160501
- Add How to enable USB Debugging
- Add Huawei Driver (Install Hisute)
- Add Install Recovery for Mate7,Mate8 Stock and TWRP Recovery for Marshmallow
Beta 01 - 20160429
- initial version
- Unlock bootloader
- Relock bootloader
- Utility
1. Exit FASTBOOT AND RESCUE MODE
2. Reboot to Recovery
3. Reboot to Bootloader
XDA:DevDB Information
SRK Tool Huawei, Tool/Utility for the Honor 8
Contributors
somboons
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2016-10-02
Created 2016-09-29
Last Updated 2016-10-02
Download link :
Lod-Chong V2.0 - 20161002 (NEW)
SRKToolHuawei-Lod-Chong-V2.0-20161002.zip
Download here --> SRKTool Huawei
Support me , donate with my email paypal : [email protected]
VDO How to
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice job man, i love your tool :good:
Sent from my HUAWEI VIE-L29 using XDA Labs
Nice toolkit, just download it for future use.
Have anyone tried it yet?
All steps including getting the bootloader code to unlock -> twrp -> Root systemless?
Will this break OTA updates?
Magisk is impossible for Honor 8 It seems so hope anyone get this to work before I take the plunge
nivity said:
Have anyone tried it yet?
All steps including getting the bootloader code to unlock -> twrp -> Root systemless?
Will this break OTA updates?
Magisk is impossible for Honor 8 It seems so hope anyone get this to work before I take the plunge
Click to expand...
Click to collapse
It works for L09, i have tried it. It will not break OTA but u cant install OTA when you are on TWRP. U need to install stock recovery before upgrade OTA.
Sent from my HUAWEI VIE-L29 using XDA Labs
Nice, people will love this. Thank you for bringing it over!
mgbotoe said:
Nice, people will love this. Thank you for bringing it over!
Click to expand...
Click to collapse
It's a god tool, i have used it on Mate 8 and P9.
Sent from my HUAWEI VIE-L29 using XDA Labs
Tried to get the bootcode but no matter how I enter it it just says
"Please fill in the correct identification code; please check the product type is entered correctly, if it is more IMEI / MEID phone, use a different IMEI or MEID retry"
I guess I will have to wait until there is a better way to unlock this phone in the future.
nivity said:
Tried to get the bootcode but no matter how I enter it it just says
"Please fill in the correct identification code; please check the product type is entered correctly, if it is more IMEI / MEID phone, use a different IMEI or MEID retry"
I guess I will have to wait until there is a better way to unlock this phone in the future.
Click to expand...
Click to collapse
The site is not working, use Dc Unlocker to unlock bootloader.
Sent from my HUAWEI VIE-L29 using XDA Labs
Got the bootloader code by following the English site, not the steps in the guide in the tool because that does not work.
Unlocked, TWRP, rooted and Xposed installed now. Everything working perfect
The only thing that sucks is that I cannot use Unicon because SuperSU is systemless, and I guess I will brick the phone If i try and install an older version according to what I read.
Hope Unicon gets an update in the future or something ! Need to change icons and names with stock launcher.
nivity said:
Got the bootloader code by following the English site, not the steps in the guide in the tool because that does not work.
Unlocked, TWRP, rooted and Xposed installed now. Everything working perfect
The only thing that sucks is that I cannot use Unicon because SuperSU is systemless, and I guess I will brick the phone If i try and install an older version according to what I read.
Hope Unicon gets an update in the future or something ! Need to change icons and names with stock launcher.
Click to expand...
Click to collapse
What step doesnt work in my guide please tell me , I will clear for you.
Sent from my NEXT using Tapatalk
Next build.
2.0 Lod-Chong - 201610xx
- Add Changing oeminfo and custom.bin (Honor8 AL10,C10)
I'm waiting for oeminfo C185,C636 please backup and send to me.
somboons said:
Next build.
2.0 Lod-Chong - 201610xx
- Add Changing oeminfo and custom.bin (Honor8 AL10,C10)
I'm waiting for oeminfo C185,C636 please backup and send to me.
Click to expand...
Click to collapse
It is possible to use your tool to change oeminf of al00 version ?
Iaa85 from Brazil with Galaxy S7 Edge
Powered by EchoeRom with marvelous Ael Kernel
iaa85 said:
It is possible to use your tool to change oeminf of al00 version ?
Iaa85 from Brazil with Galaxy S7 Edge
Powered by EchoeRom with marvelous Ael Kernel
Click to expand...
Click to collapse
What region do you want to change? Now my tool have AL00,10 and 432.
I will add oemingo for AL00 . please wait for next build.
Sent from my NEXT using Tapatalk
somboons said:
What region do you want to change? Now my tool have AL00,10 and 432.
I will add oemingo for AL00 . please wait for next build.
Sent from my NEXT using Tapatalk
Click to expand...
Click to collapse
To 432 is my interest... But as you post I think it is possible! Thanks a lot and I want to help to develop it!
Iaa85 from Brazil with Galaxy S7 Edge
Powered by EchoeRom with marvelous Ael Kernel
Updated.
Build name : Lod-Chong (Thai Food) 2.0 - 20161002
- Add Changing oeminfo and custom.bin (Honor8 AL10,C10,DL00)
- Add Changing oeminfo and custom.bin (P9 Lite DL00,L31C432,L21C185,L22C636,L21C10)
Hi.
This sounds promising.
Unfortunately I have the Honor Note 8 (EDI-AL10) which does not appear to be supported.
Can you add support for it?
I assume it would require a TWRP version for it to exist already, though, right?
As far as i've seen thats not the case yet.
somboons said:
Updated.
Build name : Lod-Chong (Thai Food) 2.0 - 20161002
- Add Changing oeminfo and custom.bin (Honor8 AL10,C10,DL00)
- Add Changing oeminfo and custom.bin (P9 Lite DL00,L31C432,L21C185,L22C636,L21C10)
Click to expand...
Click to collapse
Hi i tried all the afternoon into change my honor8 AL00 into L09-432. it looked to be done but after following all steps it was just a FRD(nothing) in the system info menu. then i tried to go back to AL00 but was really difficoult. I made a lot of attemps and finally I did it. After this I wanted to relock the bootloader to hide the orange writes bootscreen "your phone is now untrasted......etc....." cause i want to sell it under warranty but in the end it powered on with a RED WRITES bootscreen "your phone is untrasted and may not work correctly.....etc...." and stopped to boot in a screen where it say to type the password to decrypt the storage. I tried with bootloader psw and it say it's ok but have to do a wipe reset. after wipe reset it power on again with RED WRITES bootscreen "your phone is untrasted and may not work correctly.....etc...." and stopped again the boot on the screen where it say to type the password to decrypt the storage. it was a loop. then I decided to unlock bootloader again and after this it booted normally but still the the orange writes bootscreen "your phone is now untrasted......etc....." so I can't sell it under warranty. Is there a solution for that all?
Thanks
freccia said:
Hi i tried all the afternoon into change my honor8 AL00 into L09-432. it looked to be done but after all it was just a FRD(nothing) in system info menu. then i tried to go back to AL00 but was really difficoult. I made a lot of attemps. finally I did it. At this moment I would like to relock the bootloader to hide the orange writes bootscreen "your phone is now untrasted......etc....." cause i want to sell it under warranty but in the end it powered on with a RED WRITES bootscreen "your phone is untrasted and may not work correctly.....etc...." and stopped to boot in a screen where it say to type the password to decrypt the storage. I tried with bootloader psw and it say it's ok but have to do a wipe reset. after wipe reset it power on again with RED WRITES bootscreen "your phone is untrasted and may not work correctly.....etc...." and stopped again the boot on the screen where it say to type the password to decrypt the storage. it was a loop. then I decided to unlock bootloader again and after this it booted normally but still the the orange writes bootscreen "your phone is now untrasted......etc....." so I can't sell it under warranty. Is there a solution for that all?
Thanks
Click to expand...
Click to collapse
Is your phone L09C432 now or AL00?
Sent from my HUAWEI VIE-L29 using XDA Labs
Good morning Everyone
I have an Mate 8 L09C605 (Latin America) and i am trying to change its region to C432 (Europe) but it is impossible to find the oeminfo and custom.bin
Could someone share those files from the C432 please?
With all those rom players i guess there is a lot of backups out there... should not be so difficult to find
Thanks a lot.
Me too. Please help us. Thank you
Cust international (normal) = C900 OTA LOSS but you should be able to install rom from any region
--------------------------------------------------------------------------------------------------------------
Update running
--------------------------------------------------------------------------------------------------------------
Update OK. Now i am L09C900B320
---------------------------------------------------------------------------------------------------------------
The only thing I can not remember is how I am switched to L09C900B100 ... too much manipulation with SRK Tool among others with the change of region.
But it seems to me that it is doing as follows:
1- Full backup with TWRP -Before to change region-
2- Reboot
3- Region change (SRK Tool)
4- Restore TWRP Backup
5- Reboot (it seems to me that at this moment I found myself in L09C900B100, my starting Rom was L09C605B100 (Latin America). So if your starting Rom is a B180 for example, you should end up with L09C900B180.
THEN...
1- Create dload on SDCard with UPPDATE.APP (in my case from L09C432B320)
2- Restore Huawei recovery (SRK Tool)
3- Launch update * # * # 2846579 # * # *
4- Install TWRP EMUI 4.1 (SRK tool)
7- Root with TWRP
8- Reboot
--------------------------------------------------------------------------------------------------------------
VERSION INFORMATION:
In dialer * # * # 2846579 # * # * Enter and then 3 - Network Information and then on 4 -
Vendor Country Info
Here you will find a following entries:
Cust eu = C432 - Europe
Cust specseas = C636 - Asia
Cust meanaf = C185 - Africa / Middle East
Cust ru = C10 Russian
Cust international (normal) = C900 OTA LOSS but you should be able to install rom from any region
Cust la = C605 Latin America
platajeret said:
Cust international (normal) = C900 OTA LOSS but you should be able to install rom from any region
--------------------------------------------------------------------------------------------------------------
Update running
--------------------------------------------------------------------------------------------------------------
Update OK. Now i am L09C900B320
---------------------------------------------------------------------------------------------------------------
The only thing I can not remember is how I am switched to L09C900B100 ... too much manipulation with SRK Tool among others with the change of region.
Click to expand...
Click to collapse
First of all, thank you for spending your precious time writing out the instructions for us.
I followed exactly as your instruction; however, at the end, when I checked About Phone in Settings, my phone is L29C432B320 instead of L09C432B320. This is why I need the OEMINFO and CUSTOM.BIN file for L09C432B320. Thank you
Before to change the region (that gave you the L29), have you done the TWRP backup? While you where still in L09?
Oops! I don't think I did. Do you think that could be the case? BTW, how do you like C432 stock firmware? Is it any better than C636? Thank you
Yes i think that is thé reason. C432 or C636 are not firmware but région. Thé firmware i had was B100 ans now i am with B320. So far m'y phone is faster even without doing any Factory reset. But for stability ans battery life, i can't say yet.
I Guess you could be back to L09 by changing with Srk Tool the buildprop things, but better check with specialists on the fórum.
Thank you, platajeret.
I went back to L09C636B191
backup System with TWRP (for some reasons, TWRP wouldn't lemme backup Data)
reboot
changed Region
reboot
restored Backup in TWRP
dload L09C432B192
I still get L29C432B192 after all was done. So frustrated.
Hello guys,
I recently encountered a problem regarding creating scatter file for my Android device through mtk droid root and tools v2. 5
3
My device specifications: -
Micromax canvas tab P681
Hardware: - MT8321(CPU-Z detects it as MT6580)
Baseband version: - MOLY. WR8. W1449. MD. WG. MP. V61, 2016/03/10
Android version: - 6.0
Build number: - MMX_P681_SW_V2.2_HW_V1.2_10092016
Kernel version: - 3. 18. 19
[email protected] #2
sat Sep 10 15: 59 CST 2016
Serial number: - PX06X67260101238
I want to create a scatter file for this device. Mtk droid tools detect my device as unstable ROM and cannot backup. I need it because to create CWM recovery for my device. My device does not allow to root, I tried kingroot, kingoroot, iroot, mtk droid tools and everything failed to root. So I need help to create scatter file or if there are any other ways to root it. Thx in advance
Find here: usehelp.org/%D0%BF%D1%80%D0%BE%D0%B3%D1%80%D0%B0%D0%BC%D0%BC%D1%8B-%D1%81%D0%BE%D1%84%D1%82-%D0%B8%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D0%B8/%D0%B8%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D0%B8/scatter-%D1%84%D0%B0%D0%B9%D0%BB%D1%8B-%D0%B4%D0%BB%D1%8F-%D1%81%D0%B1%D1%80%D0%BE%D1%81%D0%B0-frp-%D0%BD%D0%B0-%D1%83%D1%81%D1%82%D1%80%D0%BE%D0%B9%D1%81%D1%82%D0%B2%D0%B0%D1%85-mtk/
Looks like Lenovo released open source code for our tablet:
Lenovo Tab3 8 plus (TB-8703X) Open Source Code
https://download.lenovo.com/consumer/mobiles/tab3_8_plus_osc_.zip
I hope that developers can use it for making great roms for our tablet.
daitalos said:
__MediaFire:
TWRP 3.2.1-0 P8 F (wifi) - img : http://www.mediafire.com/file/ikhhn....2.1-0117-LENOVO_P8%288703F%29-CN-wzsx150.img
TWRP 3.2.1-0 P8 F (wifi) QPST : http://www.mediafire.com/file/8txq2...-0117-LENOVO_P8%288703F%29-CN-wzsx150-QPST.7z
TWRP 3.2.1-0 P8 X (3g,lte) - img : http://www.mediafire.com/file/u462b....2.1-0117-LENOVO_P8%288703X%29-CN-wzsx150.img
TWRP 3.2.1-0 P8 X (3g,lte) - QPST : http://www.mediafire.com/file/99n9c...-0117-LENOVO_P8%288703X%29-CN-wzsx150-QPST.7z
__MEGA CLOUD :
TWRP 3.2.1-0 P8 F (wifi) - img : https://mega.nz/#!RuQCzDwQ!iwVlWa9G9TsOoUaaYrWzp2NAEDDbpop9Um_pS-X5HJk
TWRP 3.2.1-0 P8 F (wifi) - QPST : https://mega.nz/#!8io3SJTA!eSn7u6sflkaKTOGgJLeUUQIs3S9HsfsO_TH_ARW67bA
TWRP 3.2.1-0 P8 X (3g,lte) img : https://mega.nz/#!JqYH2ZDR!GRPZ221byg9XYftcySpNmz-wYsMbjNlct5Uu3dMQy40
TWRP 3.2.1-0 P8 X (3g,lte) QPST : https://mega.nz/#!w3Zm1LRJ!LVJDK9WlJo0fMWxYEkKHkFWkrCt297n03OVc4FOw4yo
_ source: https://club.lenovo.com.cn/thread-2783629-1-1.html ( Many thanks to developer "wzsx150 & LR.Team" for his work in TWRP for Lenovo P8)
_how to Install? open the link above in Chrome browser & translate (Is Chinese forum)
_Or you can see/read OP & Instructions by @danj88 > [TWRP][Root][Guide] Lenovo P8 (TB-8703F and TB-8703X) : https://forum.xda-developers.com/general/general/twrp-lenovo-p8-tb-8703f-tb-8703x-t3689442
__All QPST Versions here : https://androidmtk.com/download-qpst-flash-tool
__Lenovo USB drivers & how to install : https://lenovousbdriver.com/tutorial/install-lenovo-usb-driver
__Qualcomm drivers : https://androiddatahost.com/nbyn6
[Qualcomm usb drivers windows xp,7,8,8.1,10 32+64bit] :
http://www.mediafire.com/file/qt3icenq3faemfu/Qualcomm_USB_Drivers.7z
_[Qualcomm HS-USB QDLoader 9008 - Windows XP / 2000 / Vista / 7/8 / 8.1 / 10 x64 ] http://www.mediafire.com/file/u3mrk0qan6qz5sq/Qualcomm_USBDriver_2.1.0.5_x64.cab
__Universal USB drivers all versions & how to Install: https://androidmtk.com/download-universal-adb-driver
__15 Seconds ADB Installer (all versions): https://androidmtk.com/download-15-seconds-adb-installer
___How Unbrick Lenovo P8 / Stock Rom (F+X),Files,Guide,drivers etc :
https://forum.xda-developers.com/android/development/lenovo-p8-tb-8703f-wifi-how-to-flash-t3720621
Click to expand...
Click to collapse