Hi My phone is a Xtouch Unix (Not Unix Pro) i tried flashing TWRP and i soft bricked it. If i go to recovery mode it goes back to bootloop. If i go to fastboot mode it will give me text saying fastboot mode. i tried unlocking the bootloader but its says FAILED (remote:Unlock opertion is not allowed) is there another to unlock it. And there is normal boot mode which is back to bootloop.
Related
I've android PumpKinx 10.1 tablet with 5.1 Lollipop android os.
I did take backup of its stock recovery image.
Since there is no custom recovery image for this device I tried to flash it with twrp recovery image. But after running below command, device goes into bootloop. I've tried many methods but no success.
fastboot flash:raw boot twrp.img
Any help would be highly appreciated. Thanks in advance.
maybe u have locked bootloader. First turn on oem unlock in developer options, then reboot in bootloader and type
Code:
fastboot oem unlock
Then confirm acion in the tablet whit volume up, then the bootloader now is unlocked.
Note: The tablet get soft reset. Make backup first.
Then try flash the recovery
xdedeone said:
maybe u have locked bootloader. First turn on oem unlock in developer options, then reboot in bootloader and type
Code:
fastboot oem unlock
Then confirm acion in the tablet whit volume up, then the bootloader now is unlocked.
Note: The tablet get soft reset. Make backup first.
Then try flash the recovery
Click to expand...
Click to collapse
Do you understand boot loop or not? First of all fastboot is already unlocked otherwise how I will be able to run above command and since my device is in boot loop then how can I go to developer option?
chitrang200889 said:
I've android PumpKinx 10.1 tablet with 5.1 Lollipop android os.
I did take backup of its stock recovery image.
Since there is no custom recovery image for this device I tried to flash it with twrp recovery image. But after running below command, device goes into bootloop. I've tried many methods but no success.
fastboot flash:raw boot twrp.img
Click to expand...
Click to collapse
Just send them an email asking for stock firmware with flash tool, along with the purchase bill..
Or if it still has warranty, just go to the service center and say something like you over-charged the phone a complete night & since then it's not working and claim warranty..
Have you tried to wipe the cache partition or even factory reset???
Hello. So a friend has a mate 7 and he somehow soft bricked it. He told me that he tried to update it.
It is stock(no root, locked bootloader etc)
When i turn it on i get the rescue mode screen, saying Attention! Please update system again
Error!
Func NO : 13(FUNC_BOOT_FLASH)
Error NO : 1
I cant ender recovery mode(black screen). I can only ender Fastboot mode.
I tried to reflash recovery.img and boot.img(i got the files using huawei extractor. got them from a 4.4 rom i found),
but when i type any of these commands i get this error
FAILED (remote: Command not allowed)
I installed adb drivers and Hisuite.
I would unlock the bootloader, but i cant access some of the needed codes because the phone wont boot.
I also tried to force update from a sd card, but nothing happens. The phone just boots in rescue mode and just hangs there.
Any help would be apreciated. Thanks!
Ok so after some hours of googling i think the only was to unbrick it, is to unlock the bootloader and then flash via fastboot.
The problem is that there is no way to get the product id. The phone cant boot or do anything. It can only start in rescue and fastboot mode.
Any ideas?
I think the latest update is the cause of this. My phone randomly shut down and couldn't turn back on, just stuck on the Moto logo and reboots forever.
I tried unlocking bootloader but I can't since "Allow OEM Unlock" is not enabled.
I tried deleting cache and userdata through fastboot and I got the error "Formatting is not supported for filesystem with type 'raw'." Bricked?
Is there anything I can do...? I LOVE THIS PHONE.
After flashing a POTTER_NPN25.137-92_cid50 stock rom now it says
Your device didn't start up successfully. Use the Software Repair Assistant on computer to repair your device. Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
ERROR: Failed to pass validaton, backup to fastboot
Boot up failed
What should I do? Did I not flash the right ROM for xt1687??? What should I do??
Ok so, this isn't my first time flashing and returning to stock with phones, just the worst. Any help is appreciated.
I unlocked the bootloader, installed TWRP and tried to flash a few ROMS which were not working great so I went to go back to stock and then the **** show happened. Its the LO4 Model. I flashed stock recovery, Relocked the bootloader and tried the Force Flash Update method. Well now the phone is stuck in a boot loop(Cant power it down), cant boot to erecovery/ recovery -- I can get to fast boot mode but the FRP is locked so I can not do anything all commands fail with an error.
Any thoughts? I just need to get it back to stock OR a working ROM- I plan on selling this phone and My wife (it was her phone) has upgraded to a Galaxy S9. If I cant get it to work, I will post it on swappa as is for a cheap price
Thanks!
Same Issue
I did the same thing, however when in fastboot type fastboot oem unlock (put the code here) and this will unlock your bootloader. I did this I even managed to flash the stock system cust recovery and boot, but it doesnt boot into recovory, erecover, or even download mode to download the software from the sd card. Any ideas?
I tried that fastboot code and I get an error because of the FRP lock
I recently unlocked bootloader on my phone successfully and flash twrp recovery which is also successfully installed using ADB.
But when I want to enter into recovery or boot it always show only one screen fastboot verify ok..
When I restart it says orange mode your phone has been unlocked .
I can use my mobile but could not enter into twrp recovery or boot. Plz help I am in stress