Hi everyone, I have a galaxy S6 Flat with Android 7.0 Nougat and I flashed throug ODIN v3.12 this file "twrp-3.1.0-0-zeroflte.img.tar", but when I power up the phone in recovery mode, it boots with the stock recovery.
How can i fix this problem? I retry to flash the TWRP?
I have to uncheck the "auto reboot" option on ODIN?
Bye
yes , make uncheck the "auto reboot" and reboot manually to recovery and you will have twrp installed
Same problem but not solve me.
Twrp not boot, stock recovery
G920FXXU6ERF5, android nougat
Related
Hey guys,
I used this tutorial: http://forum.xda-developers.com/galaxy-s6/general/galaxy-s6-root-5-1-1-variants-t3147074 to root my phone but on reset my
phone is stuck on this startup now and i can't fix it. I also tried v8 of unikernel but no luck. Anyone can help me ?!
I selected BL/AP and then i selected the unikernel and started.
Model: SM-G920F (Telekom Branding)
There is NO OEM Option in Developer Settings.
I would head over to sammobile and download the stock firmware and odin it back to stock.
When I flashed the UniKernel I only clicked AP. I believe BL is for boot loader, which you should not have flashed.
Or wait for someones else advice...
Thanks for answering, luckily to me i already fixed it !
My solution:
- Download TWRP (flashable with odin) and SuperSU (flashable with recovery)
- Flash TWRP with Odin (PA)
- Go into Recovery
- Factory Reset
- install superSU
- Restart Phone (now it works and with ROOT)
hello everyone...i have bought galaxy s6 g920f and i decided to install twrp 2.8.7.2 on stock 5.1.1 to take a backup of stock rom before installing any other rom and after i have take the backup i pressed on reboot system and then the keep rebooting and showin (samsung galaxy s6)logo only and doesn't boot up but i can go to dowload mode and recovery...then i tried to restore the back up which i had take but now to stuck on samsung logo without restarting and when trying to enter recovery it shows (recovery is not seandroid enforcing)
It's in bootloop. Just download the image, go into download mode and flash it via Odin.
Rakcoon said:
It's in bootloop. Just download the image, go into download mode and flash it via Odin.
Click to expand...
Click to collapse
thank u....i have resolved the problem by doing the installing of twrp process all over again but with installing unikernel before boot up the device
Hi,
After i had flash a bootloader, modem and TWRP from this https://www.androidfilehost.com/?w=files&flid=50807 , i have some strange problems.
First, when i use odin now to flash a bootloader or TRWP and Official firmware, i had the message "fail".
The most strange it's my recovery mode, before they start i have a blue screen with this message "installing update system", after this they show me an android with warning sign. When i succees to enter recovery, i juste have the basic one and a strange message at the top "(Android Recovery. Samsung/zerofltexx/zeroflte. 6.0.1/MMB29K/G920FXXU3PAD. User/release-keys".
Now i just want to have TWRP, to flash a custom rom, but always odin show me the message "fail".
Any idea ?
Thanks
Model? What android version did you have?
the FW : G920FXXU3DPAD_G920FOXA3DPAE_XEF
Model : G920F
I suceed to install the XEF FW and to install the 3.0.0 TWRP by odin, however when i want to enter recovery i just have the galaxy S6 animation and this "RECOVERY IS NOT SEANDROID ENFORCING"
Its stuck on s6 boot screen ? Or start nomal?
Sent from my SM-E500H using XDA-Developers mobile app
Try flashing these 3 with Odin;
920F bootloader (BL)
https://www.androidfilehost.com/?fid=24459283995301217
920F modem (CP)
https://www.androidfilehost.com/?fid=24459283995301218
TWRP by arter97 (AP)
http://www.arter97.com/browse/S6/ke...r97-recovery-g920fi-13.0-twrp_3.0.0-0.tar.md5
Recovery should be working.
Michiel0912 said:
Try flashing these 3 with Odin;
920F bootloader (BL)
https://www.androidfilehost.com/?fid=24459283995301217
920F modem (CP)
https://www.androidfilehost.com/?fid=24459283995301218
TWRP by arter97 (AP)
http://www.arter97.com/browse/S6/ke...r97-recovery-g920fi-13.0-twrp_3.0.0-0.tar.md5
Recovery should be working.
Click to expand...
Click to collapse
The recovery work well, however when i reboot my devise, it's stuck at the galaxy s6 logo :s
Did you install a new rom?
Try this one.
http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
With the add-on package you can activate all the required bloatware if you need it.
Michiel0912 said:
Did you install a new rom?
Try this one.
http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
With the add-on package you can activate all the required bloatware if you need it.
Click to expand...
Click to collapse
ohh thanks, with this rom it's working again . thanks you man
No problem!
you should put solved on thread's title.
good luck
hey guys i tried many a times to install custom rom on my samsung s6 coz i am bored with touchwiz marshmallow
soo when i flash twrp with odin and when i enter TWRP and then reboot without doing anything it wont reboot it just keeps comming Samsung s6 boot again n again
SOO i need help guys i have CM13 for samsung s6 and in installation also it creates error of updater error 7
i edited updater-script and removed setprop line and when i flashed it successfully flashed but when i reboot to system it shows samsung s6 boot with kernel is not seandroid enforcing
Please guys help me to fix i am bored with touchwiz want to use other rom help
CyanogenMod is not ready for daily use. You don't want to install it on S6.
Conenct your phone to PC in download mode and use "Rescue firmware" option on Smart Switch to reflash latest software.
Then, if you want to install TWRP, flash THIS TWRP via Odin after reflash firmware via Smart Switch;
http://www.arter97.com/browse/S6/kernel/13.1/g920fi/arter97-recovery-g920fi-13.1-twrp_3.0.2-0.tar.md5
After you've flashed, boot into TWRP and install this zip via TWR;
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip?retrieve_file=1
Then, reboot the system.
forumber2 said:
CyanogenMod is not ready for daily use. You don't want to install it on S6.
Conenct your phone to PC in download mode and use "Rescue firmware" option on Smart Switch to reflash latest software.
Then, if you want to install TWRP, flash THIS TWRP via Odin after reflash firmware via Smart Switch;
http://www.arter97.com/browse/S6/kernel/13.1/g920fi/arter97-recovery-g920fi-13.1-twrp_3.0.2-0.tar.md5
After you've flashed, boot into TWRP and install this zip via TWR;
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip?retrieve_file=1
Then, reboot the system.
Click to expand...
Click to collapse
i have also flashed noble rom same issues pls ****ing help
and btw when i flash arters recovery i can successfully log in its recovery but later on when i flash something and press reboot system then that button doesnt work it just shows it was pressed and is stucked there and can't even move from there
i have a g920f with 6.0.1 and i want to install Alliance rom. I have flashed spacex kernel and flashed twrp mm by ManhIT both using odin. (i also tried to use cf autoroot and flashed twrp but got stuck in bootloop). the problem i am facing now is that my twrp is not working when i am in twrp and i try to get out of it it gets stuck(by any option reboot, poweroff etc) but if i restart my device it will turn on like any normal device. Should I Flash alliance rom using twrp and boot it using restart method? or should i solve the twrp problem 1st?
Any Help is appriciated as i am a noob and this is my 1st phone by samsung
Thanks in Advance