FAILED (remote: Command not allowed) - General Questions and Answers

My phone is not rooted, but the bootloader is UNLOCKED. I'm sure.
I'm trying to install a custom recovery, but am getting this message:
FAILED (remote: Command not allowed)
1) Why?
2) Do I need to root my phone in order to install a custom recovery?

are you using adb commands to install custom recovery, if so no root is required.

Yes, I'm using adb, but my problem is I'm getting this "FAILED (remote: Command not allowed)" error, which prevents me from installing the custom recovery.

BentoEspinosa said:
Yes, I'm using adb, but my problem is I'm getting this "FAILED (remote: Command not allowed)" error, which prevents me from installing the custom recovery.
Click to expand...
Click to collapse
Have you installed correct ADB Drivers for your phone

formipad said:
Have you installed correct ADB Drivers for your phone
Click to expand...
Click to collapse
Yes.

Related

[Q] wifi Xoom 3.1 unlocking bootloader error...

I've followed all the guides to a T. and my SDK is able to run nicely. However, once I've made contact w/ my device in 'usb debugging mode', tested the connection w/ "adb devices" in command prompt, and set the device to bootloader w/ the "adb reboot bootloader" command, and finally I give it the command to "fastboot oem unlock", I get an unknown error!! Please help. I have all the path variables set, and my SDK is running good, and has all the newest updates.
This is a link to a video I made of the problem. Please watch. It'll help if you can see the problem! just copy and paste - youtube.com/watch?v=2bROUZh7GRI
Thanks for your responses. I hope they come quickly!
V0nice said:
I've followed all the guides to a T. and my SDK is able to run nicely. However, once I've made contact w/ my device in 'usb debugging mode', tested the connection w/ "adb devices" in command prompt, and set the device to bootloader w/ the "adb reboot bootloader" command, and finally I give it the command to "fastboot oem unlock", I get an unknown error!! Please help. I have all the path variables set, and my SDK is running good, and has all the newest updates.
This is a link to a video I made of the problem. Please watch. It'll help if you can see the problem! just copy and paste - youtube.com/watch?v=2bROUZh7GRI
Thanks for your responses. I hope they come quickly!
Click to expand...
Click to collapse
Ok. I'm unlocked now. New problem... >.< There's always something!! now when I try to flash the recovery image, I get an unknown error.
"C:\AndroidSDK\tools>fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.
img
sending 'recovery' (3998 KB)...
FAILED (command write failed (Unknown error))
finished. total time: 0.636s
C:\AndroidSDK\tools>"
Anyone recognize why it would do this?
V0nice said:
Ok. I'm unlocked now. New problem... >.< There's always something!! now when I try to flash the recovery image, I get an unknown error.
"C:\AndroidSDK\tools>fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.
img
sending 'recovery' (3998 KB)...
FAILED (command write failed (Unknown error))
finished. total time: 0.636s
C:\AndroidSDK\tools>"
Anyone recognize why it would do this?
Click to expand...
Click to collapse
just copy and paste the command from the OP's instructions. I used the new Clockwork in the thread and just renamed it... which method are you using. I just did mine last Thursday with no issues. I used this method http://forum.xda-developers.com/showthread.php?t=1078019
HTML:
adb reboot bootloader
fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
fastboot reboot
Make sure you have the latest fastboot.exe and if all else fails start from the beginning again. Now you are sure your fastboot is unlocked....
playya said:
just copy and paste the command from the OP's instructions. I used the new Clockwork in the thread and just renamed it... which method are you using. I just did mine last Thursday with no issues. I used this method http://forum.xda-developers.com/showthread.php?t=1078019
HTML:
adb reboot bootloader
fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
fastboot reboot
Make sure you have the latest fastboot.exe and if all else fails start from the beginning again. Now you are sure your fastboot is unlocked....
Click to expand...
Click to collapse
I did just copy and paste it, and i got that error message.
V0nice said:
I did just copy and paste it, and i got that error message.
Click to expand...
Click to collapse
Did you try to do the fastboot unlock again
How did you manage to get unlock to work? Perhaps if you gave us more info on what you did?

[q] Need help htc one s bricked!!!

I've been looking around at different forums to see how to get my phone back to normal and there many ways to do it and I'm stuck.I'm able to use clockwork recovery,able to use fastboot but SD card is mounted and has an error everytime I try unmount , been trying to use the command propmt not that experienced I need some guidance to how to get another rom on phone
Try to flash the stock recovery, relock the bootloader with "fastboot oem lock" and flash a RUU.
Then try again from the beginning
Do I use the command propmt or Fastboot or clockwork
dannyzat said:
Do I use the command propmt or Fastboot or clockwork
Click to expand...
Click to collapse
Open cmd prompt. Navigate to folder where your fastboot program is (i.e. c:\android is where I put mine).
Plug in phone, boot into bootloader and click power to access fastboot.
Type in the "fastboot OEM lock" command in command prompt as suggested by torxx and that will relock the bootloader. Then flash ruu in bootloader
Sent from my HTC VLE_U using Tapatalk 2
I did all of that except for the last sentence how do I flash on command prompt
dannyzat said:
I did all of that except for the last sentence how do I flash on command prompt
Click to expand...
Click to collapse
Once u relock bootloader, you are done with command prompt... I think. I havemt done it on this phone, but usually you put ruu on root of sdcard (internal in this case) and reboot into bootloader and the ruu should begin flashing from there. Make sure its named properly. I'm sure there are threads regarding this
Sent from my HTC VLE_U using Tapatalk 2
still learning how to develope android phone's
Ok I'm on bootloader but idk. How to put the ruu on my sdcard if its mounted
dannyzat said:
Ok I'm on bootloader but idk. How to put the ruu on my sdcard if its mounted
Click to expand...
Click to collapse
try the adb command just go to this link http://forum.xda-developers.com/showthread.php?t=1667929 everything is there
ok i looked at the link and try to push the rom but the adb is not even detecting my device
this is what i get:C:\Documents and Settings\Jamal\Android>adb push rom.zip/sdcard
Android Debug Bridge version 1.0.29 and then all the information about adb about the options and commands
Im on fastboot right now and using the command prompt still, the bootloader is unlocked, and i dont think adb has dected my device beacause it does this for every command: C:\Documents and Settings\Jamal\Android>adb shell
error: device not found
C:\Documents and Settings\Jamal\Android>adb remount
error: device not found
C:\Documents and Settings\Jamal\Android>adb root
error: device not found
ps. my device is connected to the computer fastboot commands work but not adb
try installing the htc drivers for the One S then retry adb
ok so i just did this recently:C:\Documents and Settings\Jamal\Android>fastboot boot rom.zip
creating boot image...
creating boot image - 468381696 bytes
downloading 'boot.img'...
OKAY [946.172s]
booting...
FAILED (remote: reproduce boot image with on-flash ramdisk error)
finished. total time: 946.656s
Is this a good sign?
Plus how do you install drivers
dannyzat said:
ok so i just did this recently:C:\Documents and Settings\Jamal\Android>fastboot boot rom.zip
creating boot image...
creating boot image - 468381696 bytes
downloading 'boot.img'...
OKAY [946.172s]
booting...
FAILED (remote: reproduce boot image with on-flash ramdisk error)
finished. total time: 946.656s
Is this a good sign?
Plus how do you install drivers
Click to expand...
Click to collapse
download HTC sync make sure you read the steps right on that link and make you flash the recovery and download the Rom and push it
thank you all for helping me out
How do I get access to unmounting my sdcard cause it keeps having errors when I try to mount it in clockwork mod recoverybut still having errors
PS. Ek07 how do I use the HTC sync manager on my phone do I go to fastboot or clockwork

[Q] OnePlus One - Unable to unlock bootloader again after relocking

Hi Guys,
Hope to get some help here.
So i unlocked the bootloader of my one plus one and installed supersu + Twrp recovery. All worked fine until i decided to relock the bootloader.
I've put the device into fastboot mode and executed "fastboot oem lock" with twrp recovery still in there.
Now i am trying to unlock the bootloader again using "fastboot oem unlock" to be able to flash the stock recovery and having issues.
output of commands:
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem unlock
...
OKAY [ 0.004s]
finished. total time: 0.005s
C:\Program Files (x86)\Minimal ADB and Fastboot>
After this it boots straight to twrp recovery. I then hit reboot system and go back to fastboot mode and run the below:
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery recovery
.img
target reported max download size of 536870912 bytes
sending 'recovery' (12260 KB)...
OKAY [ 0.389s]
writing 'recovery'...
FAILED (remote: Device not unlocked cannot flash or erase)
finished. total time: 0.404s
Anyone has an idea how i can unlock the bootloader again ?
Thanks
Vik
Would it let you reflash the stock factory image thru fastboot? Maybe if you could do that it would let you unlock again. And it would give you stock recovery.
Or else what about the option in developer settings to update the stock cm recovery when installing an update. Maybe you could install an official update thru TWRP and get stock recovery back?
Just throwing out ideas, hope you figure it out
I've documented ths same issue describe here: http://forum.xda-developers.com/oneplus-one/help/locked-bootloader-twr-rooted-t2820341
The solution: http://forum.xda-developers.com/oneplus-one/development/mod-reset-unlock-tamper-bit-t2820912
Download and flash that script.
lemonspeakers said:
I've documented ths same issue describe here: http://forum.xda-developers.com/oneplus-one/help/locked-bootloader-twr-rooted-t2820341
The solution: http://forum.xda-developers.com/oneplus-one/development/mod-reset-unlock-tamper-bit-t2820912
Download and flash that script.
Click to expand...
Click to collapse
Thanks i'll give that a try as soon as am home..
YrrchSebor said:
Would it let you reflash the stock factory image thru fastboot? Maybe if you could do that it would let you unlock again. And it would give you stock recovery.
Or else what about the option in developer settings to update the stock cm recovery when installing an update. Maybe you could install an official update thru TWRP and get stock recovery back?
Just throwing out ideas, hope you figure it out
Click to expand...
Click to collapse
Hi YrrchSebor,
Thanks for the reply.. I already tried all that, even using adb sideload and keep getting same error as mentioned above. I'll try the solution lemonspeakers suggested later today and post the outcome.
Thanks
Vikmeister said:
Hi YrrchSebor,
Thanks for the reply.. I already tried all that, even using adb sideload and keep getting same error as mentioned above. I'll try the solution lemonspeakers suggested later today and post the outcome.
Thanks
Click to expand...
Click to collapse
Be careful if you updated your phone to XNPH30O OTA,
!!! Warning !!!
In the NEW OTA CM11S XNPH30O, the bootloader (aboot) img size changed....
We request all not to apply the unlocker scripts on the new bootloader , until we confirm/find the new bit position.
It might brick your phone and corrupt bootloader...
Click to expand...
Click to collapse
It won't work.. do not try it if you updated to XNPH30O using the OTA.
zephiK said:
Be careful if you updated your phone to XNPH30O OTA,
It won't work.. do not try it if you updated to XNPH30O using the OTA.
Click to expand...
Click to collapse
Thanks for letting me know ZephiK i haven't updated to that version yet. I still have XNPH25R. I should all good.
Fantastic.. Thanks a lot guys.. That worked like a treat.. Bootloader is now unlocked.
:laugh::good:
lemonspeakers said:
I've documented ths same issue describe here: http://forum.xda-developers.com/oneplus-one/help/locked-bootloader-twr-rooted-t2820341
The solution: http://forum.xda-developers.com/oneplus-one/development/mod-reset-unlock-tamper-bit-t2820912
Download and flash that script.
Click to expand...
Click to collapse
I ran this command:
Code:
fastboot.exe boot TWRP-2.7.1.0.img
But the next step does not work:
Code:
It will boot your phone into recovery once from the recovery image
stored in your PC temporarily
then you can flash the zip either by sideload or from sdcard...
I got:
downloading 'boot.img'...
OKAY [ 0.484s]
booting...
FAILED (remote: Device not unlocked cannot boot)
finished. total time: 0.487s
That's because you can't boot a recovery with the recent bootloader unless you're unlocked.
Transmitted via Bacon
Hello,
so how to unlock the bootloader when:
- i can only access to fastboot and i have connectivity to pc;
- command 'fastboot oem unlock' doesn't work( FAILED (remote: oem unlock is disabled) )
- command 'fastboot flash recovery firmware.zip' doesn't work (FAILED (remote: Device not unlocked cannot flash or erase))
- all adb commands say: "error: device not found"
- i can't access recovery for use adb sideload (phone freezes with 1+ icon in screen)
- i can't access Android (phone freezes with 1+ icon in screen)
What can i do?
Thanks in advance!
Gustavo
Im have the same issue but I have no recovery installed..Anyway to do this
i have same issue plz give me any solution if you found any???plz let me know plzzzzz
​
piriri007 said:
Hello,
so how to unlock the bootloader when:
- i can only access to fastboot and i have connectivity to pc;
- command 'fastboot oem unlock' doesn't work( FAILED (remote: oem unlock is disabled) )
- command 'fastboot flash recovery firmware.zip' doesn't work (FAILED (remote: Device not unlocked cannot flash or erase))
- all adb commands say: "error: device not found"
- i can't access recovery for use adb sideload (phone freezes with 1+ icon in screen)
- i can't access Android (phone freezes with 1+ icon in screen)
What can i do?
Thanks in advance!
Gustavo
Click to expand...
Click to collapse
plz help same issue

ADB error device not found

On the attached photo you see my bootloader/fastboot screen . I am trying to re-flash to the original stock OS, and I keep getting the errors of ADB device not found. I have the proper device drivers, and adb installed, I don't know what is wrong.
If anyone can help me it would be greatly appreciated.
Just to be clear are you using adb or fastboot when trying to flash from that screen?
Sent from my SM-T530NU using Tapatalk
I was trying to use adb from that screen,
but I solved it, using this link here. https://forums.motorola.com/posts/3405fb59b3
It says to skip the gpt.bin part, because when I execute that command it would give me the following error
(bootloader) Preflash validation failed
FAILED (remote failure)

Boot into Custom Recovery (TWRP)? no flash

hey Guys.
I want to root my X2 (GEM-701L).
Got the unlock Code from Huawei and unlocked the Bootloader with adb. Now i wanna flash CF SuperUser but i dont want to install a Custom recovery.
When i read a few Threads i saw that there is a command:
-fastboot boot RECOVERY.img
i understand it so, that this command will boot (tempoary) in a "recovery" but not flash it (permanent).
My Problem is now, that wenn i want to use this command, i got the Error:
downloading 'boot.img' ...
OKAY [0.594s]
booting...
FAILED (remote: Command nt allowed)
finished. total time: 0.594s
has someone an idea how i can solve that Problem or how i can flash SuperUser without installing a custom recovery (permanent)?
i used this files
found in this thread
sorry for my english, i am from Germany
You can't boot into something isn't there...
chill Phil said:
hey Guys.
I want to root my X2 (GEM-701L).
Got the unlock Code from Huawei and unlocked the Bootloader with adb. Now i wanna flash CF SuperUser but i dont want to install a Custom recovery.
When i read a few Threads i saw that there is a command:
-fastboot boot RECOVERY.img
i understand it so, that this command will boot (tempoary) in a "recovery" but not flash it (permanent).
My Problem is now, that wenn i want to use this command, i got the Error:
downloading 'boot.img' ...
OKAY [0.594s]
booting...
FAILED (remote: Command nt allowed)
finished. total time: 0.594s
has someone an idea how i can solve that Problem or how i can flash SuperUser without installing a custom recovery (permanent)?
i used this files
found in this thread
sorry for my english, i am from Germany
Click to expand...
Click to collapse
You need to have custom recovery to flash the SuperUser. Stock recovery you can't flash it.
chill Phil said:
hey Guys.
I want to root my X2 (GEM-701L).
Got the unlock Code from Huawei and unlocked the Bootloader with adb. Now i wanna flash CF SuperUser but i dont want to install a Custom recovery.
When i read a few Threads i saw that there is a command:
-fastboot boot RECOVERY.img
i understand it so, that this command will boot (tempoary) in a "recovery" but not flash it (permanent).
My Problem is now, that wenn i want to use this command, i got the Error:
downloading 'boot.img' ...
OKAY [0.594s]
booting...
FAILED (remote: Command nt allowed)
finished. total time: 0.594s
has someone an idea how i can solve that Problem or how i can flash SuperUser without installing a custom recovery (permanent)?
i used this files
found in this thread
sorry for my english, i am from Germany
Click to expand...
Click to collapse
Fastboot flash TWRP, boot into it, install SuperSU, fastboot flash the stock recovery then reboot. Problem solved

Categories

Resources