Database Info

[Q] HELP!!!

Ok, I think I totaly screwed up my captivate. I was trying to update to froyo 2.2 using the Odin one click method, but that didn't work, so instead I tried to instal it by following this guide on youtube (can't post link - new user)
after I did the adb reboot recovery my phone went to the recovery screen. heres what all it says:
update media, please wait...
update media, finished
#MANUA MODE#
--applying muti-csc...
installing muti0csc
mps_dat val:SER
copy_multi_carrier from: SER
multicsc : can not acces to /system/csc/SER/system/
copy_common_data
I tried to select any of the options in recovery mode, update, fatory reset, etc, but I can't select it. I know you're suposed to use the power button to select, but it does nothing. I think its because of the firmware shown on that website, where you would typically use a home key to select.
Please help! I've been working on this thing for hours and I'm completely lost! Is there anything I can do to fix it, or is it totally bricked?

ok my phones now restarted, and its running froyo 2.2, however its turning the wrong orentation and I'm note sure if I can use restart recovery. I just want to put this thing back to factory software!

use the odin 1 click for stock firmware and to update you dont go into recovery you go into download mode

Thanks! I got it back up and running now. In the progress of restoring my backups. Man after this mess, I'm just going to wait for froyo 2.2 to come out...

How to fix the boot loop on the new att capticates.

This is for the people who got a new captivate through return or purchase or how ever you obtained it. If you tried flashing a new rom and now are stuck at the att boot loop or the battery loop and your phone will not boot up here is help.
1. See if your phone will do the 3 button recovery to get into download mode.
2. If you cant get into download mode you might need a Jig or do the resistor technique to get into download mode.
3. See if this odin (I897UCJF6-final-OCD-REV0.exe) will flash your phone back to the stock 2.1.
4. If after flashing the 2.1 odin and your phone still has boot loop then try the 2.2 stock odin
5. Next do the same as previous but try with this odin (I897UCJI6-OCD-REV02-Low-designgears_1_.exe) which is the 2.2 stock odin.
Note all of these flashes require you to be in download mode and have odin fired up on your pc the plug in your phone so odin can recognize it so
a. be in download mode (not connected to PC)
b. have odin open on pc
c. Plug in phone to pc and start odin.
odin likes to stop flashing when setting pit file so if it freezes give a sec and if nothing try it again.
if odin freezes on the set pit file your phone will have the dreaded phone to pc icon during boot but dont panic set your phone into download mode and try again.
If any questions should arise PM me or leave a comment and others and i will try and help.
Took me two days to fix my phone after flashing to stock to root it but i hope this helps you turn your 400 dollar paper weight back into a phone.

umm thanks but we know how to use odin there are a million guides in every ginerflash and captivate sticky.
and the 2.2 odin is actually an internal samsung beta 2.2 not official.
returning it with the designgears 2.2 will be an obvious warranty breach if they notice.
and your Step 4 and 5 seem to say the same thing... "flash 2.2 odin" (which isnt official)
and THE REAL FIX FOR THE BOOTLOOP:
reboot into RECOVERY > (not download)
wipe cache and data! (or factory reset)...
DONE!
reboot into the rom that you were trying to use!
takes 20 seconds and no reflashing anything.

i ran into this a few days ago while trying to root a friends captivate(1008) purchased from walmart recently. after trying to flash back to stock i was stuck on att boot loop and could not get into download mode via button combo to save my life. tried everthing minus a jig....after getting fed up with it, i sat it aside. to my amazment, after about 10-15 minutes the mf booted up. i had to use adb to reboot into download mode. flashed with odin(from aio toolkit) back to 2.1. everything worked fine, no problems except for one thing...sometimes it will still loop for a few minutes before it boots...sometimes it boots right away. Im still investigating the whole ordeal but my point here is: if you think your phone is stuck on att screen, just let it sit for a while....maybe a long while. and it should boot. then use adb to get back to download mode. i read every forum post on the web about this issue...just found this thread and thought id give ppl a heads up. hope it helps

I'm stuck in a bootloop right now on the Galaxy S animation screen and this wipe cache and data method doesn't seem to work for me.

so i recently tried flashing a darky rom theme onto my captivate running mosaic 8.
it worked the first time. then i tried another theme didnt like it, so flashed the darky rom one, and now, bootloop....
i can get my cappy into download mode, but odin doesn't recognize it.
i cannot get it into recovery mode with holding down the volume up and down and power button.
i need help
--edit--
fixed!
biggest help i have EVER had in custom roms/rooting etc..
http://forum.xda-developers.com/showthread.php?t=1351224

TRusselo said:
umm thanks but we know how to use odin there are a million guides in every ginerflash and captivate sticky.
and the 2.2 odin is actually an internal samsung beta 2.2 not official.
returning it with the designgears 2.2 will be an obvious warranty breach if they notice.
and your Step 4 and 5 seem to say the same thing... "flash 2.2 odin" (which isnt official)
and THE REAL FIX FOR THE BOOTLOOP:
reboot into RECOVERY > (not download)
wipe cache and data! (or factory reset)...
DONE!
reboot into the rom that you were trying to use!
takes 20 seconds and no reflashing anything.
Click to expand...
Click to collapse
ok cmw is not mounting cache or anything else any other ideas

[Q] A CHallenge for Developers (partial brick) Please Help

[SOLVED]
MESSAGE TO DEVELOPERS/ANYONE WHO CAN HELP
Long story short, i edited my build.prop incorrectly and reset (yes i know very stupid) now my motorola cliq opens up to the motoblur screen but repeated messages saying "Sorry! the process X has shut down" show up.
Literaly, nearly nothing can open up but i am able to enter usb mode if i fight with the endless popups. i can also enter recovery mode because my phone was rooted before this. The problem is that my recovery image doesnt have any options that could help me
(reboot, apply sd card:update.zip, and wipe data/factory reset)
i've tried putting an official motorola update.zip onto my sd card then running the apply.. but like i told you before my build.prop is messed up a little so an error shows up saying:
Installing update...
E/:Failure at line 1: assert file_contains("SYSTEM:build.prop", "ro.build.fingerprint=motorola/morrison_two_us/morrison/morrison:1.5/CUPCAKE/1.4.8:user/rel-keys" == "true" || file_contains("SYSTEM:build.prop", "ro.build.prop", "ro.build.fingerprint=MOTO/morrison_two_us/moInstallation aborted
Press Menu+Back to reboot
All i need to do is fix the line of code i messed up but i cant reach my systems files,...i attached my original build.prop and a copy of my corrupted one to show you.. I also cannot use the phone service or network service (even wifi) because like i said, nearly ALL the services are unable to stay on, they immediately shut off at startup.
Ways to fix this would be to REACH/EDIT THE SYSTEMS FILES
1. I cant use an app like root explorer since i cant access any apps on my phone even things like my settings
2. Turn on usb debugging somehow (I cant access my settings app so im lost on this one)
1. ingenious DESKTOP program that can somehow access my phone's system files without adb (if it can access the sd there has to be a way..)
3. Ive looked around to maybe find a custom image recovery that had options like editing system files (shouldn't be hard to make..) but ive found none with that option and im not sure how i would install it without adb...
What i CAN do
1. ENTER USB MODE (that has to count for something so Developers Please help me)
2. I can play with the motoblur intro screen to some degree to make it go away, then a blank black home menu appears. If i wait a while for the popups to stop at the motoblur screen, i follow the instructions but it gets stuck at registering a new account or existing one since you need network access.
3. ENTER REVOVERY MODE (but the only option that looks helpful is the sdcard update which gave me an error...) I havent tried the wipe data/factory reset because the factory reset doesnt touch the build.prop so its pointless
WHat should I do? WHoever sees this please give me advice or direct me somewhere to get it... THANK YOU
[EDIT]
BTW what i was trying to do on the build.prop was replace this line (ro.build.fingerprint=generic/sdk/generic:3.2/HTJ85B/140714:eng/test-keys)
with (ro.build.fingerprint=verizon/voles/sholes/sholes:2.1-update1/ESE81/29593:user/release-keys)
but i messd up and put
(ro.build.fingerprint=verizon/voles/sholes/sholes:2.1-update1/ESE81/29593:user/rel)
youll see this in the attachments...what this does is unlock my 1.5 firmware market to ALL the apps (updating to the official 2.1 using recovery wouldve handled this but i didnt even know of this update till after my mistake)
I just thought id mention...

if you have adb abilities you can push the old build.prop. If you do not know a out this then post back and I will help you.You said you can enter recovery, but that is stock original recovery that anyone can get access to. If you ever bootstrapped your phone you can try pull the battery out, wait about 10 seconds, then plug your phone charger in without the battery in. If your bootstrappped this will pull you into a more advanced recovery mode. The last option is to use rsd lite to flash an sbf to your phone if nothing else works. If you have never done this just look up sbfing motor cliq to stock.
Good luck, and remember to thank me if this helped

SOLVED!!
I fixed my phone on my own but THANKS to rootfan for being the first to answer.
HERES HOW:
I was able to access recovery mode and from there i discovered the sd update option.
It took hours of research and work but i learned alot about adb,motorola, cliq, etc.
Anyway, i originally found the Blur_Version.2.1.5.MB200.T-Mobile.en.US.zip and i tried to put that in my sd card (i could get into it from the phone) but when i tried to update using recovery it gave me an error so i decided to try the "latest 1.5 with Blur 1.6.1" which was actually very hard to find... you can get it here
motorola. com/staticfiles/Support/Experiences/sdcards/US-EN/tmo/cliq/downgrade-to-cupcake .html
Lastly, i put that on my sd as update.zip, went into recover, and the update was SUCCESSFUL! MY PHONE REBOOTED AND NOW IS ACTING NORMAL AGAIN. Now, im trying to update to the Android™ 2.1 (Eclair):
motorola. com/staticfiles/Support/Experiences/sdcards/US-EN/tmo/cliq/2-1_index. html
but im still getting that error whether i update using recovery or the settings/about phone/system update option... Thats strange but my phone is still working normally and ill find a way to update to 2.1...
ONCE AGAIN THANKS TO ROOTFAN AND HOPEFULLY THIS POST WILL WORK FOR SOMEONE ELSE WHO MAY BE HALF-BRICKED (no adb, no usb debug, no root explorer) THERS STILL HOPE IN RECOVERY+USB DRIVE+BLUR VERSION SOFTWARES

Thanks man, now this is probabaly a redicilous reply, since im sure you would have already tried this, but you can try going into settings, about phone, and click on update and see if the 2.1 eclair ota update will work on your phone.

i've got a simila problem on my samsung Galaxy S5570...
... and i need to prepare an update.zip .
Can you help in this, or you only downloaded a new rom ?

stepph said:
i've got a simila problem on my samsung Galaxy S5570...
... and i need to prepare an update.zip .
Can you help in this, or you only downloaded a new rom ?
Click to expand...
Click to collapse
You can reflash a stock rom back if you wanna get it done easily - or even a updated gingerbread one from samfirmware.com
Search for S5570 in these fora for some guides

I need some help

Hey guys, I am kinda thinking I am screwed. I have Nexus S 3g that I am working on and it had a custom 4.0.3 rom on it when I got it. My task was to take it back to stock and I saw an easy way to do it(Just flashing a stock 2.3.6 over it) and NOW I am totally absolutely, stuck. I get through the boot process and then BAM when I need to log in to the gmail to get the the rest of the phone, I get FC galore. I get Setup Wizard FC'ing, I get com.google.process.gapps doing it, and... ACORE also. I can't get past the android account registering.
Here is my question... Is it possible to fix this using ODIN where I can access the core processes(Like on the Droid Charge) or what do I need to do to fix this? I'm relatively advanced and pretty comfortable with ADB but I cant get the phone(while its on) in to debug mode.
Please either post on here OR if you know how to fix it, please email me at [email protected] to set up a gtalk session cuz I am freaking out.

What is your nexus s model ?

its an i9020t

Power the Nexus S down, and hold Volume Up & the Power button to access
fastboot mode
download custom recovery Clockworkmod
rename the file to recovery.img
connect the nexus to the computer and open cmd make sure adb is installed
in cmd type fastboot flash recovery recovery.img
then open recovery mode
choose wipe data factory reset
mount usb mass storage and copy the full stock ice cream sandwich 4.0.3 Rom to your sd card
choose intall zip from sd card and install the rom
wait for the flash to complete and reboot your phone
you should be ok
i apologize for my terrible english .

htcdesirezgeorge said:
Hey guys, I am kinda thinking I am screwed. I have Nexus S 3g that I am working on and it had a custom 4.0.3 rom on it when I got it. My task was to take it back to stock and I saw an easy way to do it(Just flashing a stock 2.3.6 over it) and NOW I am totally absolutely, stuck. I get through the boot process and then BAM when I need to log in to the gmail to get the the rest of the phone, I get FC galore. I get Setup Wizard FC'ing, I get com.google.process.gapps doing it, and... ACORE also. I can't get past the android account registering.
Click to expand...
Click to collapse
I think you just need to wipe cache and dalvik-cache. It also doesn't hurt to do a factory data reset just in case (remember to backup your SD card though)

THanks a ton! I thought that was about right but I was operating with one eye last night(got poked in the other one lol) and wasnt thinking straight!

This is how to Root Rogers Samsung Rugby!

Been trying to Root this phone for a couple of days. Finally manged to do it!
Its the Rogers Samsung Galaxy Rugby. The (GT-S5690R) model.
I had to add the (R) in the updater script. Thats how I got it too root.
1. Put the file on your sd-card Universal_GB_ROOT_v5_patched_for_S5690.zip
2. Turn phone off
3. Boot in to Recovery ( press Power, Vol-up, and center button on bottom of phone all at same time. The samsung logo will appear, keep holding all buttons, then the logo will dissapear then re-appear, when it comes back let go of the power button only. The phone should boot into the 3e recovery)
4. use vol keys to navigate through menu, and use center button on the bottom of the phone to select.
5. Select install update from sd card.
6. press on the Universal_GB_ROOT_v5_patched_for_S5690.zip
7. phone should install root, wait till the 'Success' appears, then reboot.
You should find Superuser app when your phone reboots. You are Rooted!!
Now im just trying to figure out how to get a custom recovery!!

Perfect!
This zip file worked perfectly on my Rogers Galaxy Rugby. Many thanks!

Happy to hear
Sent from my GT-S5690R using xda premium

Big problem now though....
So the root went swimmingly, but I got a little too excited removing pre-installed apps. I backed up and removed Samsung Home, and removed and NOT backed up SNS 1.0. The phone will now refuse to boot unless I wipe data/factory reset in recovery mode, but after that it just ends up crashing during the Android wizard start up....
This is a brand new phone, what can I do to restore those apps, and get it back to the way I received it earlier today?!

There is a way to boot into safe mode, head Google mod2extreme and I find the forum for our phones (currently the only one) find advise there
Sent from my GT-S5690R using xda premium

Thanks for the name of that forum! I've found the guide someone posted here: http://www.mod2xtreme.com/showthread.php?t=12386 and I've decided to try it.
I'm using the first firmware listed in this thread: http://www.mod2xtreme.com/showthread.php?t=11744 (S5690XXKL1 2.3.6 2011 December S5690OXFKL1) mostly because under Country/Carrier it has nothing, so I'm assuming it's more generic than the others. I'm also keeping in mind this is for the 5690, not the 5690R, so it may not work at all. But, worth a shot since my only other recourse is to break down and cry in front of a Rogers attendant to see if he can give me a new one. "Root? What's root? Like ginger?"
I'm using v.1.83 of Odin3, which is listed as supported the 5690.
Downloaded KIES 2.0 from http://www.samsung.com/my/support/usefulsoftware/KIES/JSP - It gave me two DLL registration (COM) errors during installation on Windows. Uncertain if this will end up screwing me over or not.
Be right back, rebooting now that KIES is installed... will edit this post when there's more to report.
EDIT: Yeah, so I ended up trying both Odin version 1.83 and 1.85, with the Marvell .pit file, and the firmware from that thread. I learned that I had to put the phone into Download Mode, NOT Recovery Mode while trying Odin. Even still, nothing worked. I've given the phone up to Rogers and they will try to replace the original ROM, hopefully they won't notice that I've rooted it and really mucked everything up. They said if it doesn't work they'll send it off to Samsung to get it repaired. Anyone know if they find out I rooted it, I'd have to pay for voiding a warranty or anything?

i have the same device hae you manage to get clockworkmod recovery on it?

Does this method erase all personal data/downloaded apps from phone?

Great it worked perfectly...
did you success in installing different firmware?
Thanks again

Thanks a lot, worked like a charm.
Is there a way I can install Clockwork Mod? Rom manager doesn't recognise the s5690r. It gives me the option of selecting the Epic4G or the GalaxyS i9000. will either of these work?
Also, once I get that figured out, is there any roms compatible with the s5690r? I've scoured the webs with no luck. Not a very popular phone, eh?
Thanks again.

markdexter said:
Been trying to Root this phone for a couple of days. Finally manged to do it!
Its the Rogers Samsung Galaxy Rugby. The (GT-S5690R) model.
I had to add the (R) in the updater script. Thats how I got it too root.
1. Put the file on your sd-card Universal_GB_ROOT_v5_patched_for_S5690.zip
2. Turn phone off
3. Boot in to Recovery ( press Power, Vol-up, and center button on bottom of phone all at same time. The samsung logo will appear, keep holding all buttons, then the logo will dissapear then re-appear, when it comes back let go of the power button only. The phone should boot into the 3e recovery)
4. use vol keys to navigate through menu, and use center button on the bottom of the phone to select.
5. Select install update from sd card.
6. press on the Universal_GB_ROOT_v5_patched_for_S5690.zip
7. phone should install root, wait till the 'Success' appears, then reboot.
You should find Superuser app when your phone reboots. You are Rooted!!
Now im just trying to figure out how to get a custom recovery!!
Click to expand...
Click to collapse
Good Day, I am also working on the Bell Canada Version of the Rugby. It is the GT-s5690m model. I am now stuck in a bootloop and don't know how to fix it. I have played around with the root and unroot zip files that have been floating around but I am certain that the bootloop is due to not being able to clear the Delvik Cache. As you are aware Clockworkmod recovery is not supported on our devices. I am unsure how to get it to work. Until then I just keep trying different things to hopefully get this phone up and working. It is quite a rugged device and would be great with a custom rom and recovery. Could you explain to me in layman's terms how I might create a flashable clockwork image to flash via Odin or even through stock recovery. I would love to get this phone up and working. Thanks in advance

Sasktel Rugby
Hi there. I am working on the Sasktel version of this phone as well. I tried to change the model from R to M because this phone is the same as the bell model version but it would not install it. I found it on the external SD card but it will not run the zip file from the 3e recovery. Any ideas why this might be happening?
Thanks,