Related
Hi everyone,
I have D6603 with with Android 5.1.1 (23.4.A.0.546) with an unlocked bootloader (done per instructions on Sony's website).
For a while now I've noticed that the device overheats when I use the camera for a few minutes. According to this article,
the new update Sony have released, is supposed to mitigate the problem.
I cannot update my phone to the new Android version, because of the unlocked bootloader.
Can/should I re-lock the bootloader? Or is there a way to stop the overheating issue?
beentold82 said:
Hi everyone,
I have D6603 with with Android 5.1.1 (23.4.A.0.546) with an unlocked bootloader (done per instructions on Sony's website).
For a while now I've noticed that the device overheats when I use the camera for a few minutes. According to this article,
the new update Sony have released, is supposed to mitigate the problem.
I cannot update my phone to the new Android version, because of the unlocked bootloader.
Can/should I re-lock the bootloader? Or is there a way to stop the overheating issue?
Click to expand...
Click to collapse
You can still update to the latest firmware with flashtool.
Beetle84 said:
You can still update to the latest firmware with flashtool.
Click to expand...
Click to collapse
Thanks for the info Beetle. May I be so rude to ask you, where I can get the most up to date flashable ROM?
I did unlock the bootloader, but never managed to install a recovery mod or get root.
[/COLOR]
beentold82 said:
Thanks for the info Beetle. May I be so rude to ask you, where I can get the most up to date flashable ROM?
I did unlock the bootloader, but never managed to install a recovery mod or get root.
Click to expand...
Click to collapse
In flashtool theres a button labelled xperifirm, if you click that and follow the instructions you can download a ftf directly.
As for root and recovery, you can use this guide http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056 , and then create a pre rooted 5.1.1 firmware from here http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
Or you can install androplus kernel http://forum.xda-developers.com/z3/development/kernel-andropluskernel-t2925999 after you upgrade to stock 5.1.1 with fastboot, and skip the whole downgrade to kit kat which would be alot quicker.
Wow, that seems easy enough. I'll try it later tonight. Thanks again!
beentold82 said:
Wow, that seems easy enough. I'll try it later tonight. Thanks again!
Click to expand...
Click to collapse
No worries, good luck. You may have to disable virus protection to download xz dual recovery installer, well, I have to anyway, my VP doesnt like the install.bat file.
EDIT: isn't the .546 the latest?
Not sure... My phone tells me there is a system update, but it always fails because of the unlocked bootloader.
robogo1982 said:
EDIT: isn't the .546 the latest?
Click to expand...
Click to collapse
23.4.A.1.264 is I believe.
Hello, so ive been getting this message in my Moto g 3gen to update to 6.0 from months now.
Im tired of this message so i want to update now from 5.1.1 to 6.0
The thing is that i have my phone rooted.
What shuld i do before updating android?
Shuld i unrooy my phone and make get it to stock format?
ilmank said:
Hello, so ive been getting this message in my Moto g 3gen to update to 6.0 from months now.
Im tired of this message so i want to update now from 5.1.1 to 6.0
The thing is that i have my phone rooted.
What shuld i do before updating android?
Shuld i unrooy my phone and make get it to stock format?
Click to expand...
Click to collapse
Just flash the latest Marshmallow image via fastboot.
acejavelin said:
Just flash the latest Marshmallow image via fastboot.
Click to expand...
Click to collapse
I want to update android ussing the message i get from my phone.
Sorry but im little new in cellphone things and dont know too much about flash and all that stuff. But i know how to unroot that is why i was asking if i will be able to update android if i unroot my phone.
Ty for reply!
ilmank said:
I want to update android ussing the message i get from my phone.
Sorry but im little new in cellphone things and dont know too much about flash and all that stuff. But i know how to unroot that is why i was asking if i will be able to update android if i unroot my phone.
Ty for reply!
Click to expand...
Click to collapse
You can unroot and update via OTA but when you have a unlocked bootloader OTA's are always risky.
Just download latest ROM for your phone and flash it, instruction are also given and is pretty easy and safe.
Iqbal Ansari said:
You can unroot and update via OTA but when you have a unlocked bootloader OTA's are always risky.
Just download latest ROM for your phone and flash it, instruction are also given and is pretty easy and safe.
Click to expand...
Click to collapse
And if i download latest ROM for my phone do i need to unroot before falshing the ROM?
ilmank said:
And if i download latest ROM for my phone do i need to unroot before falshing the ROM?
Click to expand...
Click to collapse
No. Just start flashing according to the instruction. Root is a system level thing and does not interrupt in flashing. You have to root again after flashing unless it is a pre-rooted rom.
But as you are upgrading first flash stock motorola rom whichever is latest.
Iqbal Ansari said:
No. Just start flashing according to the instruction. Root is a system level thing and does not interrupt in flashing. You have to root again after flashing unless it is a pre-rooted rom.
But as you are upgrading first flash stock motorola rom whichever is latest.
Click to expand...
Click to collapse
Ok thanks... So just to be sure (sorry im just a noob xD)
I download lastet ROM from my phone.
I flash it with TWRP?
Phone will be formated and all apps will be deleted rigth?
Will be like a phone with stock data?
I Downloaded lastest room from my phone, its 750MB.
And one last question, if i use the option to "Restore fabric configuration" is the same as installing a ROM?
Thanks again and sorry for all the questions
ilmank said:
Ok thanks... So just to be sure (sorry im just a noob xD)
I download lastet ROM from my phone.
I flash it with TWRP?
Phone will be formated and all apps will be deleted rigth?
Will be like a phone with stock data?
I Downloaded lastest room from my phone, its 750MB.
And one last question, if i use the option to "Restore fabric configuration" is the same as installing a ROM?
Thanks again and sorry for all the questions
Click to expand...
Click to collapse
Look you can do flashing and upgrading in more than one way.
Just follow this link and do exactly what it says: If you have any question PM me, I will gladly help.
Also by flashing this way your recovery will be replaced by stock recovery and you have to reflash TWRP.
Your phone will be completely stock and all data will be erased.
Note:
Read very carefully before doing anything.
Also download correct rom for your device. The model no. should match.
http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
Iqbal Ansari said:
Look you can do flashing and upgrading in more than one way.
Just follow this link and do exactly what it says: If you have any question PM me, I will gladly help.
Also by flashing this way your recovery will be replaced by stock recovery and you have to reflash TWRP.
Your phone will be completely stock and all data will be erased.
Note:
Read very carefully before doing anything.
Also download correct rom for your device. The model no. should match.
http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
Click to expand...
Click to collapse
Thanks a lot!
I will do that tomorrow (going to sleep rigth now).
I'll try to do it on my own, but if i have a any quesiton i'll PM you.
Thanks a lot again.
I've only had two phones prior to this but I have always unlocked the boot loader / rooted the device / installed a custom recovery / installed custom ROMS.
I believe with my MOTO X 1st gen this disabled the OTA updates.
Is that the case with the Honor 8? I'm wondering if it is worth it to install TWRP at this point as there seems to be so little in the way of kernels and ROMS.
Would I still be able to use SU or Xposed modules without Root?
What is the best move with this phone?
I have unlocked my bootloader as well as rooted my Honor 8. The only way to get SU and Xposed is by doing both of these procedures(root involves getting TWRP).
As for any Xposed modules, I tried amplify+greenify but instead of getting better battery life, my standby time decreased significantly. I am not sure why, but for some reason my Cell standby was showing to be eating a ton of my battery. Another big problem was that the dialer app would not let me call anyone, it kept crashing whenever I tried to. Both problems were fixed after I managed to get amplify+greenify uninstalled. Currently I am just running YouTube AdAway and MinMinGuard which seem to work fine.
So at this point, is it worth unlocking bootleader, installing TWRP, and rooting your phone? Well if there are certain Xposed modules that you really want then sure, and if there are certain apps you like that require root, then yes go ahead and root your phone. Note that if you try any OTA updates, you will have to remove TWRP as having your phone automatically restart and try to install the update wont work.
Imagine that the Honor 8 receives an update to say, Nougat, what is the pathway to update for someone who has rooted their phone. Will the OTA be able to be flashed if a .zip is provided here? Would we need to flash an entirely new ROM?
This is what I faced with my MOTO X. When Marshmallow came out there was talk... but no one was working on the at phone any longer so was never able to update.
pairustwo said:
Imagine that the Honor 8 receives an update to say, Nougat, what is the pathway to update for someone who has rooted their phone. Will the OTA be able to be flashed if a .zip is provided here? Would we need to flash an entirely new ROM?
This is what I faced with my MOTO X. When Marshmallow came out there was talk... but no one was working on the at phone any longer so was never able to update.
Click to expand...
Click to collapse
It doesnt matter whether or not your phone is rooted. You will get updates the same way, through OTA. Of course you can find .zip files to flash(although personally I am struggling to get the latest update flashed through TWRP).
The real question is for how long will we be receiving updates? Nougat is pretty much guaranteed with the new EMUI update. Huawei/Honor has promised up to 2 years of updates from what I have heard, but who knows what that actually means. They have also have a "partnership" with XDA, and the phone is decently popular so I am sure there will be a few roms, just not as many as say a OP3.
Why are people trying to flash via TWRP if the OTA updates still work after rooting and unlocking the boot loader?
pairustwo said:
Why are people trying to flash via TWRP if the OTA updates still work after rooting and unlocking the boot loader?
Click to expand...
Click to collapse
Okay so I just figured it out, but for the OTA update to work after rooting and having a non-stock recovery, you need to go to Settings->Updater->Menu(located on the bottom)->Download latest full package.
The full package is ~1.6GB and the regular update is ~280mb. The full package will work even if you have TWRP installed. But if you want the regular 280mb update, you need to get rid of TWRP and go back to a stock recovery.
Of course you will need to reinstall TWRP and root your phone again after doing this update.
Rakeen70210 said:
Okay so I just figured it out, but for the OTA update to work after rooting and having a non-stock recovery, you need to go to Settings->Updater->Menu(located on the bottom)->Download latest full package.
The full package is ~1.6GB and the regular update is ~280mb. The full package will work even if you have TWRP installed. But if you want the regular 280mb update, you need to get rid of TWRP and go back to a stock recovery.
Of course you will need to reinstall TWRP and root your phone again after doing this update.
Click to expand...
Click to collapse
I see the full package but I cant click on this, nothing is happened when I click on this.
Nas42O said:
I see the full package but I cant click on this, nothing is happened when I click on this.
Click to expand...
Click to collapse
I am not sure what you mean. Do you mean you can see the text "Download latest full package" but it is greyed out? If so please check to see if you arent currently at the latest version. If there is another problem, you might want to try to find a .zip of the full package and flash it that way.
Rakeen70210 said:
I am not sure what you mean. Do you mean you can see the text "Download latest full package" but it is greyed out? If so please check to see if you arent currently at the latest version. If there is another problem, you might want to try to find a .zip of the full package and flash it that way.
Click to expand...
Click to collapse
Yes , not greyed , but red color , and cant click on this .
I downloaded a full update of B31 about 1.77giga , just copy to the phone and flash it in twrp ?
Nas42O said:
Yes , not greyed , but red color , and cant click on this .
I downloaded a full update of B31 about 1.77giga , just copy to the phone and flash it in twrp ?
Click to expand...
Click to collapse
The exact latest update that I currently have is FRD-L04C567B150. I am not sure where you got your update but I suggest you just flash back to a complete stock image and try to update again from there.
Rakeen70210 said:
The exact latest update that I currently have is FRD-L04C567B150. I am not sure where you got your update but I suggest you just flash back to a complete stock image and try to update again from there.
Click to expand...
Click to collapse
its normal , you live in India no ?
i'm live in European country , so update are different .. Last update for us is FRD-L04C432B130
Nas42O said:
its normal , you live in India no ?
i'm live in European country , so update are different .. Last update for us is FRD-L04C432B130
Click to expand...
Click to collapse
No I am in the US. I am not sure about the EU version, but yes if you can find a .zip update file just put it on your phone and go into TWRP to install it. Might wanna make a backup too and wipe cache too just in case.
So if i download the full package in update and install it, bootloader will still be open? No full wipe? And later i only need to install twrp and root the phone again?
Palindrom87 said:
So if i download the full package in update and install it, bootloader will still be open? No full wipe? And later i only need to install twrp and root the phone again?
Click to expand...
Click to collapse
Updating or wiping your phone does not lock the Bootloader. The only way to lock the Bootloader again is by doing it manually yourself.
Yes after doing a full update you will need to reinstall TWRP as it will be replaced with the stock recovery and then re-root your phone again.
Rakeen70210, you sound really confident about doing full updates after rooting. Will these full updates also replace the kernel?
palendrome87 and NAS420 could you guys report back with any success or errors you have flashing full updates?
Where can one download full updates for Honor 8?
pairustwo said:
Rakeen70210, you sound really confident about doing full updates after rooting. Will these full updates also replace the kernel?
palendrome87 and NAS420 could you guys report back with any success or errors you have flashing full updates?
Where can one download full updates for Honor 8?
Click to expand...
Click to collapse
Seeing as how the full update package was ~1.65GB in size, I think its ok to assume that it replaces everything with the stock Honor 8 image. So yes it will replace the kernel too.
For downloading full updates, the only way I got mine was an OTA directly from the phone itself. Look at my previous comments to see how I got this update. If for some reason you cant update, check if your model is ready for an update. If it is and you cant update, try to flash back to a stock image. You should be able to find one on this site or anywhere else.
Flash stock recovery will lock boot loader ?
Nas42O said:
Flash stock recovery will lock boot loader ?
Click to expand...
Click to collapse
No, the only way to lock the bootloader is to manually lock it yourself using a similar operation to unlocking it.
Rakeen70210 said:
No, the only way to lock the bootloader is to manually lock it yourself using a similar operation to unlocking it.
Click to expand...
Click to collapse
I thought the same thing, but after taking the full OTA update my bootloader was locked again. If you want to update I would suggest first making a full backup to the external SD card in TWRP.
Then , its better to download à full update ( update.zip) ,copy to root of the phone , reboot in twrp and flash it ? Anyone already did it ?
According to the Verizon Galaxy S5 Update Page:
The current software update gives you the most up to date Android® security patches on your device.
Click to expand...
Click to collapse
The security patch included is the April (2017-04-01) one.
Stock No-Wipe FW. Will remove Developer Status Bootloader:
G900VVRS2DQD1_G900VVZW2DQD1_G900VVRS2DQD1_HOME.tar.md5.zip
Developer Bootloader Friendly:
G900VVRS2DQD1_G900VVZW2DQD1_G900VVRS2DQD1_HOME_No_Aboot.tar.md5.zip
what does the Developer Bootloader Friendly mean or differ from Stock No-Wipe FW. Will remove Developer Status Bootloader?
Thankyou!
knight194 said:
what does the Developer Bootloader Friendly mean or differ from Stock No-Wipe FW. Will remove Developer Status Bootloader?
Thankyou!
Click to expand...
Click to collapse
If you have a Developer Edition phone, the Stock one will remove the Developer status. The Developer Bootloader Friendly one won't.
Quick question... I've been on Lineage, and have flashed this and gone back (to update the baseband). But, do you know off-hand, how do I easily root on this image? My BL is still unlocked and I've got TWRP reinstalled.
Thanks!
sry this is off subject but what is the latest modem update for the 900v or the best one in regards to best lte signal?
nictabor said:
Quick question... I've been on Lineage, and have flashed this and gone back (to update the baseband). But, do you know off-hand, how do I easily root on this image? My BL is still unlocked and I've got TWRP reinstalled.
Thanks!
Click to expand...
Click to collapse
If you have TWRP installed, just flash a SuperSU zip (i.e. SuperSU 2.79 SR3) in recovery and you'll be rooted.
Unless of course you're talking about going back to Lineage and re-rooting. In that case, you'll have to use the Lineage root zip, which I don't have a link to.
KazuDante said:
sry this is off subject but what is the latest modem update for the 900v or the best one in regards to best lte signal?
Click to expand...
Click to collapse
Normally the latest update provides the latest/best modem.
Dudash said:
If you have TWRP installed, just flash a SuperSU zip (i.e. SuperSU 2.79 SR3) in recovery and you'll be rooted.
Unless of course you're talking about going back to Lineage and re-rooting. In that case, you'll have to use the Lineage root zip, which I don't have a link to.
Normally the latest update provides the latest/best modem.
Click to expand...
Click to collapse
where can i find the latest modem for the 900v , and im guessing its a flash process using odin correct?
KazuDante said:
where can i find the latest modem for the 900v , and im guessing its a flash process using odin correct?
Click to expand...
Click to collapse
It depends. It could be a .tar file you flash via Odin or it could be a flashable zip via TWRP. It depends on the maker of the file.
It's just the modem.bin file from the update. I don't have the time to make one for it right now.
Dudash said:
If you have TWRP installed, just flash a SuperSU zip (i.e. SuperSU 2.79 SR3) in recovery and you'll be rooted.
Unless of course you're talking about going back to Lineage and re-rooting. In that case, you'll have to use the Lineage root zip, which I don't have a link to.
Normally the latest update provides the latest/best modem.
Click to expand...
Click to collapse
I actually figured it out while waiting. Thank you for responding though!
nictabor said:
I actually figured it out while waiting. Thank you for responding though!
Click to expand...
Click to collapse
You're welcome.
On a side note, it seems like Verizon read the recent articles where the Galaxy S5 was still rated as the most popular smart phone being used on any network. Meaning, they are updating the phone monthly now, which is good news for us. We won't ever get Nougat but apparently we'll get Security Patches monthly now.
Dudash said:
It depends. It could be a .tar file you flash via Odin or it could be a flashable zip via TWRP. It depends on the maker of the file.
It's just the modem.bin file from the update. I don't have the time to make one for it right now.
Click to expand...
Click to collapse
so can i take the modem.bin file from this update and replace it with the one from a 7.1.2 rom ? also i used to mess with porting roms but on mediatek platform , are the modem files still located in /system/etc/firmware directory?
because what i see is modem.b00-b27 ,modem.mdt
---------- Post added at 08:04 PM ---------- Previous post was at 07:08 PM ----------
i tried flashing the dev friendly one and the md5 check failed....am i missing something?
Dudash said:
According to the Verizon Galaxy S5 Update Page:
The security patch included is the April (2017-04-01) one.
Stock No-Wipe FW. Will remove Developer Status Bootloader:
G900VVRS2DQD1_G900VVZW2DQD1_G900VVRS2DQD1_HOME.tar.md5.zip
Developer Bootloader Friendly:
G900VVRS2DQD1_G900VVZW2DQD1_G900VVRS2DQD1_HOME_No_Aboot.tar.md5.zip
Click to expand...
Click to collapse
Developer bootloader friendly??? Do 11 EMMC Chips finally have freedom???
how do we flash this update , odin fails on md5 check
Deleted
flashed the update but phone stuck on verizon logo.
did i do something wrong?
i would assume due to the fact that the bootloader is not its bootloader it froze/locked up , so heres my question if i flash the non dev friendly one , can that bootloader be unlocked or its better not to risk it?
KazuDante said:
flashed the update but phone stuck on verizon logo.
did i do something wrong?
i would assume due to the fact that the bootloader is not its bootloader it froze/locked up , so heres my question if i flash the non dev friendly one , can that bootloader be unlocked or its better not to risk it?
Click to expand...
Click to collapse
I would not do it.
erw38 said:
I would not do it.
Click to expand...
Click to collapse
Since there no tut regarding an unlocked version of this update I simply updated from bpb1 to qa1 , just needed my modem to be somewhat up to date , but it seems that it's def a tx rx issue in my case , so my best bet is a custom kernel with that feature included.
KazuDante said:
Since there no tut regarding an unlocked version of this update I simply updated from bpb1 to qa1 , just needed my modem to be somewhat up to date , but it seems that it's def a tx rx issue in my case , so my best bet is a custom kernel with that feature included.
Click to expand...
Click to collapse
I didn't think a tutorial was necessary as I've never had to give one in the past. If your device is unlocked, you should know it. That's the only reason there is a Dev Friendly version of the update. It won't unlock your bootloader, but it won't lock it if it is unlocked. That's the only reason I make a Developer Bootloader Friendly version of updates.
If you want to update your modem but not the firmware, open either of the files in 7zip/WinZip, extract the modem.bin, then repackage it as a .tar file and flash it in Odin.
KazuDante said:
flashed the update but phone stuck on verizon logo.
did i do something wrong?
i would assume due to the fact that the bootloader is not its bootloader it froze/locked up , so heres my question if i flash the non dev friendly one , can that bootloader be unlocked or its better not to risk it?
Click to expand...
Click to collapse
In regard to your previous post, there is no problem with the MD5 for either file or any problem with the files themselves. I test them both before uploading them to prevent problems like this for people. I flashed the Dev Friendly version on both of my eMMc 15 S5's and experienced zero problems. The phone will hang on the "Verizon logo" for a minute or two at first boot but it will go past it and continue to "Optimizing" after that.
If you flash the Stock version, if your bootloader is unlocked, it will lock it and in order to re-unlock it, you'll have to use jrkruse's unlock method which requires you to go back to PB1. As of this post, he has not created a QD1 bootloader unlocker. The latest bootloader unlocker he has created is for QC2, which still requires you to have an unlocked bootloader prior to flashing it.
EDIT: Also, if you use an app like Package Disabler Pro to disable applications without root, it can cause updates to hang indefinitely at first boot if you don't re-enable all disabled applications and turn off/remove Admin rights for Package Disabler Pro prior to updating. I've experienced this in the past with both of my S5's and my S7. I'm not directing this at you KazuDante, this is just a warning to all.
21-Savage said:
Developer bootloader friendly??? Do 11 EMMC Chips finally have freedom???
Click to expand...
Click to collapse
No. The Developer Bootloader Friendly version is just that, friendly to devices with a Developer Bootloader. Meaning it won't remove Developer Bootloader status/lock the bootloader.
If I had figured out a way to help all of the eMMc 11 people unlock their bootloader, I would've made a thread that clearly stated that.
I think the only way people with Toshiba eMMc's will get an unlocked bootloader is if either
A: Verizon provides an update to unlock the bootloaders on all S5's AFTER they stop putting out Security Updates, which is highly unlikely since it is Verizon, they've never done it before, and there's no end to Security Updates in sight.
B: Someone at Samsung or Verizon leaks an engineering bootloader. This is the most likely scenario since it's happened before. First, in my experience, with the VZW S3, and the latest being with the S7. There's still hope but it may rely on someone from within Verizon or Samsung feeling bad for us.
Sorry
@Dudash Any idea how to go from the Dev-friendly QD1 version you uploaded to a TWRP flashable zip file which resembles the jrkruse VZW_QA1_STOCK_ROOTED_DEODEXED.zip? I really like to debloat and root before flashing. Thanks!
Hi,
I received today a notification to upgrade to B360 ( i still use the 4.1.3 emui B151), while my phone as Unlocked Bootloader and root!! I was thinking it was impossible to received this notification when the phone was rooted.
I have a few question yet:
1 If I upgrade to B360 should I loose the unlocked bootloader?
2 If i upgrade to B360 should I loose the root? When yes, how can I root my phone?
3 If i upgrade to B360, can I use Xposed Modules as with B151,
Thanks You for your Help!!!
ben75011 said:
Hi,
I received today a notification to upgrade to B360 ( i still use the 4.1.3 emui B151), while my phone as Unlocked Bootloader and root!! I was thinking it was impossible to received this notification when the phone was rooted.
I have a few question yet:
1 If I upgrade to B360 should I loose the unlocked bootloader?
2 If i upgrade to B360 should I loose the root? When yes, how can I root my phone?
3 If i upgrade to B360, can I use Xposed Modules as with B151,
Thanks You for your Help!!!
Click to expand...
Click to collapse
You will only lose root and xpose. Theres a thread in here about the twrp for emui 5. Start from that if you want root again xpose included.
darKz22 said:
You will only lose root and xpose. Theres a thread in here about the twrp for emui 5. Start from that if you want root again xpose included.
Click to expand...
Click to collapse
Thank you!!
But i have a question, the notification I received is the Final rom or the Beta Rom?
ben75011 said:
Thank you!!
But i have a question, the notification I received is the Final rom or the Beta Rom?
Click to expand...
Click to collapse
Final but improvements will be roll out in the next builds
darKz22 said:
Final but improvements will be roll out in the next builds
Click to expand...
Click to collapse
Rhanks You !!!!
A latest question, can I install this update directly from the Software Update, and than flash the modded Recovery?
ben75011 said:
Rhanks You !!!!
A latest question, can I install this update directly from the Software Update, and than flash the modded Recovery?
Click to expand...
Click to collapse
Yes you can.
darKz22 said:
Yes you can.
Click to expand...
Click to collapse
Thanks a Lot!!
I upgrade and root and install TWRP this morning. All work thine, but I am a little disapointed.
1 I can not uptade The latest SU Binary from SuperSU...... How to fix it?
2 How can I found the Dalvik size etc... because in the new Build.prop, there is nothing ...
3 In phone info, my Buil still in Test Key, and I dont have anymore the systeme update...
ben75011 said:
Thanks a Lot!!
I upgrade and root and install TWRP this morning. All work thine, but I am a little disapointed.
1 I can not uptade The latest SU Binary from SuperSU...... How to fix it?
2 How can I found the Dalvik size etc... because in the new Build.prop, there is nothing ...
3 In phone info, my Buil still in Test Key, and I dont have anymore the systeme update...
Click to expand...
Click to collapse
You updated through ota? First time seeing the test key build number error because of update through ota
darKz22 said:
You updated through ota? First time seeing the test key build number error because of update through ota
Click to expand...
Click to collapse
Yess, I updated trough OTA... So yet, what should i do to update my phone to B360 without problem?
ben75011 said:
Yess, I updated trough OTA... So yet, what should i do to update my phone to B360 without problem?
Click to expand...
Click to collapse
In my experience the only solution to this is to backup data, then if possible, use firmware updater (can downloadn in playstore) then download the b360 update with the Full ota-mf-pv tag. Flash it using dload method. About thw dload method search the honor 6x threads cause i dont use it. I did not encounter this problem when updating
darKz22 said:
In my experience the only solution to this is to backup data, then if possible, use firmware updater (can downloadn in playstore) then download the b360 update with the Full ota-mf-pv tag. Flash it using dload method. About thw dload method search the honor 6x threads cause i dont use it. I did not encounter this problem when updating
Click to expand...
Click to collapse
Thanks You @darKz22, I updated with the update data from firmware updater, and all is thine yet.
But I can not update the SU binary, and install Busy Box.... Any Idea??
ben75011 said:
Thanks You @darKz22, I updated with the update data from firmware updater, and all is thine yet.
But I can not update the SU binary, and install Busy Box.... Any Idea??
Click to expand...
Click to collapse
Is the build number and system update present? If it is im glad to know that. If you really want to root your phone the go to this thread:
https://forum.xda-developers.com/honor-6x/development/twrp-t3583413
It will answer all your questions about that
Be advise that emui 5 uses a different twrp version than emui 4.1 just reaf op's post and you will be fine
darKz22 said:
Is the build number and system update present? If it is im glad to know that. If you really want to root your phone the go to this thread:
https://forum.xda-developers.com/honor-6x/development/twrp-t3583413
It will answer all your questions about that
Be advise that emui 5 uses a different twrp version than emui 4.1 just reaf op's post and you will be fine
Click to expand...
Click to collapse
Thanks You!! All work fine yet. I do a fresh install, installed TWRP and SuperSU and all work thine yet!
Thanks you a lot!
ben75011 said:
Thanks You!! All work fine yet. I do a fresh install, installed TWRP and SuperSU and all work thine yet!
Thanks you a lot!
Click to expand...
Click to collapse
Always happy to help
ben75011 said:
Hi,
I received today a notification to upgrade to B360 ( i still use the 4.1.3 emui B151), while my phone as Unlocked Bootloader and root!! I was thinking it was impossible to received this notification when the phone was rooted.
I have a few question yet:
1 If I upgrade to B360 should I loose the unlocked bootloader?
2 If i upgrade to B360 should I loose the root? When yes, how can I root my phone?
3 If i upgrade to B360, can I use Xposed Modules as with B151,
Thanks You for your Help!!!
Click to expand...
Click to collapse
Hello developers:
I also received that update and my device was unlocked & rooted. Unfortunately I installed it, root was gone. I hardly flashed the TWRP 3.1.0.2 recovery, tried for 3 days now to flash the SuperSU but unfortunately i couldn't, when I flash it, it goes under some process but no change & no SuperSU app when booting the divece.
So please help I just want that stupid root.
KhalidZH said:
Hello developers:
I also received that update and my device was unlocked & rooted. Unfortunately I installed it, root was gone. I hardly flashed the TWRP 3.1.0.2 recovery, tried for 3 days now to flash the SuperSU but unfortunately i couldn't, when I flash it, it goes under some process but no change & no SuperSU app when booting the divece.
So please help I just want that stupid root.
Click to expand...
Click to collapse
Hi @KhalidZH, I had no problem to flash the TRWP . Try to flash this SuperSU and tell me if its work
Thanks
ben75011 said:
Hi @KhalidZH, I had no problem to flash the TRWP . Try to flash this SuperSU and tell me if its work
Thanks
Click to expand...
Click to collapse
It worked!
Thank you so much for help, I appreciate it.
KhalidZH said:
It worked!
Thank you so much for help, I appreciate it.
Click to expand...
Click to collapse
Happy to see that its work !!!!
Thanks for your report