HEY FOLKS,
This THREAD will GUIDE you to flash recovery.img from PHONE.
I found many of the people found difficult to flash recovery via FASTBOOT and TERMINAL EMULATOR by using CODES.
Here is a SIMPLE method to flash recovery from phone through app.
STEPS:
1) Download recovery flasher utility.apk
download link
2) install the recovery flasher utility.apk file.
3) download your preferred recovery.img
4) copy the downloaded recovery.img file to sd-card and place it in ROOT of your sd-card (Don't keep the file inside any folder because the app may not recognize the file)
5) rename the downloaded recovery.img file as recovery.img(all in lower case)
6) Open the app and flash the recovery by pressing the "install recovery" button (Please be patient, wait for the complete flash, wait till you get the display "reboot into recovery")
7) done!!! :good: enjoy your new recovery.:victory:
(note: this method worked very well for me, app flashed recovery within 2sec, and i am not responsible if it wont work for you or anything is messed up.)
:victory: hit :good: if this guide was helpful. :highfive:
.apk to flash recovery
Is there any way to find the success of flashing ?
cvpillai said:
Is there any way to find the success of flashing ?
Click to expand...
Click to collapse
yes mate, after flashing through app, the app will show reboot into recovery. after that just boot into recovery(manually).
hit thanks if i helped :highfive:
does it work on all rooted mobiles
aashking said:
HEY FOLKS,
This THREAD will GUIDE you to flash recovery.img from PHONE.
I found many of the people found difficult to flash recovery via FASTBOOT and TERMINAL EMULATOR by using CODES.
Here is a SIMPLE method to flash recovery from phone through app.
STEPS:
1) Download recovery flasher utility.apk
download link
2) install the recovery flasher utility.apk file.
3) download your preferred recovery.img
4) copy the downloaded recovery.img file to sd-card and place it in ROOT of your sd-card (Don't keep the file inside any folder because the app may not recognize the file)
5) rename the downloaded recovery.img file as recovery.img(all in lower case)
6) Open the app and flash the recovery by pressing the "install recovery" button (Please be patient, wait for the complete flash, wait till you get the display "reboot into recovery")
7) done!!! :good: enjoy your new recovery.:victory:
(note: this method worked very well for me, app flashed recovery within 2sec, and i am not responsible if it wont work for you or anything is messed up.)
:victory: hit :good: if this guide was helpful. :highfive:
Click to expand...
Click to collapse
abhi1607 said:
Click to expand...
Click to collapse
Hopefully it should work in all rooted devices
Hit thanks if i helped :good:
Dear Friends,
Here is a new AOSP ROM with pure Lolipop Experience for our Lenovo A6000/Plus.
You need to be on official Lolipop, If you are still on Kitkat DONT FLASH IT.
First update your device toLolipop using Official OTA. Please explore XDA for "How to upgrade A6000/Plus to Lolipop"
Always a good Idea to take backup of device, including Modem, EFS, Radio etc if you may.
Downloads: :good::good::good:
ROM
GAPPS Use ARM 64 5.1.1 packages depending on your preference (Nano Gapps will do if you dnt want to install google apps as system apps)
TWRP Recovery TWRP-1 TWRP-2
Superuser
Steps to Install:
(If you are a noob PLEASE explore XDA before commenting here that this ROM bricks the phone, my phone is dead etc. If you are flashing ROM for the first time.. then it takes a lot of learning, Use YouTube, Google to learn about Custom Recovery, Super User etc)
Transfer ROM GAPPS and SuperUser Files to Your SD CARD.
Proceed for Recovery Installation.
1. Install TWRP .img File. (TWRP is a custom recovery which replaces your stock recovery)
Steps to install TWRP Recovery
a) Install Minimum ADB and Fastboot on Your PC along with USB Drivers for your Phone. XDA Link for Help
b) Rename the recovery file to "recovery.img" (You will need the name to build command line.)
c) Copy recovery.img file to the same folder where ADB is installed.
d) Connect android to PC via USB and enable USB debugging from Developer Options, Authorize USB debigging.
e) Open ADB application as administrator, Give command "adb devices", this will ask for USB debugging authorization, give that.
f) run following commands:
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot boot recovery.img
More Help
You will be now on TWRP screen
1. Select Install > SuperUser
2. Wipe Data and cache
3. Select Install > ROM ZIP File (Add More Zips) Select GAPPS ZIP File.
4. Swipe to Flash.
5. Wait till it completes
6. Reboot, Be patient first boot takes time.
7. Setup Your Phone and you are good to Go.
Bugs : None Known.
GPS Working, SIM Cards Working, FM Radio Working, Hindi and Indian languages Working, Camera Working, Performance Good, Gaming Smooth, Battery drain Normal.
If you face any bug, please report.
NOOBS : Please dont comment I am DEAD, I am Bricked blah blah.. That not because of ROM, thats because you have not done enough study and not learned how to flash ROMs.
Screenshots: :cyclops::cyclops::cyclops:
Duplicate of Pure AOSP 5.1.1. Stable Rom for Lenovo A6000/Plus 64 BIT Version (Step by step Guide)
closed.
Step by Step Installation of/Upgrade to Android Pie Custom Roms
Following this guide, you will lose all your data if haven't backed it up yet!!
Also NO USING GSI PIE!!!
Requirements:
- Twrp is already installed.
What you need:
- LineageosTWRP (Attached to thread)
- Custom Rom (can be found here)
- Open Gapps (Pico or Nano)
Only if Root is wanted: Chose either of them
Magisk(Recommended) or SuperSU
- A brain and a body
- The Knowledge that you will wipe your phone by doing this. Be Warned.
Installation:
1. Backup all the files that you have either by copying them to a usb drive ,a micro SD or your computer.
2. Check that all files are copied successfully and can be opened or viewed.
( Some apps have a cloud synchonisation feature, use it if you have it as an option since it is really helpful!)
3. Now, get your preferred rom, gapps and if wanted, your root method ready, also unzip the twrp file aswell.
Copy them to your micro SD.
4. Boot into twrp via adb or by using some app(root needed).
In Twrp, go into wipe option, then select change file system. Change file System to ext4.
4.1 Now use Twrp Reboot-Menu Option to reboot into recovery(twrp) again.
4.2 Wipe system, data, cache and dalvik-cache partitions using the Wipe option
5. Go into Install Option and Press on "Install IMG" , select pietwrp image and flash it. (The name should be lineagerecovery.img or something if downloaded via telegram)
(If you don't have it yet and are in the Lenovo P2 Telegram group, type #pietwrp in chat and make sure to safe it to your download folder. Otherwise it's also attached to this thread.)
6. Reboot back to recovery like you did in step 4.1.
7. Now install your rom and gapps.
8. Wipe cache and then reboot .
9. Setup your phone and Enjoy.
( For Root, reboot to recovery. Flash your Root Method, wipe cache and reboot)
Enjoy and thank your Devs
FAQ
Q: Instructions unclear, phone stuck in bootloop
A: Either do this:
Download this folder and use one of the two ".bat" files. Boot into Bootloader via Volume Down and Power Button. --
It will flash S048 Firmware of our Lenovo P2, after the flash-process is finished it will boot up on its own. Recommended: Do all the ota updates via ota app.
Or: Boot into bootloader, via adb cmd prompt use: fastboot boot lineagerecovery.img , then use reboot menu to reboot into twrp. Clean Wipe phone(Wipe system,data, cache and dalvik-cache Partitions) and try flashing your Rom etc. again.
Q: Instructions unclear, hardbricked my phone!!
A: Thaat shouldn't have happened. Did you screw up somewhere?...
Luckily you backed up your most important files!
This guide is general guide for the installation of custom ROMs. I will also include guide to install stock ROM on devices which have been bricked or for solving various problem which you may encounter in custom ROMs. There are other guides for the same purpose but most of them are outdated and many of you seem to ignore old guide despite the fact that those guides can be helpful.
This is guide is only relevant for installation of custom ROMs which were released up to the date of posting this guide or up to android version 11. Recovering a bricked device can be done in the same way as to this one but installation instruction for devices with android version greater than 11 may differ.
DISCLAMER
Code:
I am NOT responsible for bricked devices,
thermonuclear war or for you getting fired because your alarm app failed.
Make sure the bootloader is unlocked and never lock the bootloader
How to unlock bootloader ?
>See in this thread.
Hard Brick, Soft brick, Problems in custom rom due to bad base, installation of base for switching to custom roms: windows linux
Installation of stock ROM through fastboot : The reply below
Migration from stock base to custom ROM : CLEAN FLASH
Migration between different version of same custom ROM : DIRTY FLASH
FOR SPECIFIC THREADS
Oragne Fox For Daisy
TWRP For Daisy
Magisk
CREDITS:
LInkBoi for his previous guide and TWRP
DarthJabba9 for Orange Fox Recovery
Every pros in daisy telegram groups.
EDL FLASHING (For windows only)
EDL flashing can be helpful when flashing every partition of device is needed either for clean stock base or after brick or after some failure.
EDL flashing can be the final resort when everything else fails.
PREREQUISITES
1) A good USB cable, your phone
2) A PC with either windows or linux
3) Fastboot drivers from google and edl drivers from qualcomm
4) Platform tools from google
5)Fastboot rom. This should be full rom in .tgz format.
6)Xiaomi flash tool (LATEST VERSION AVAILABLE)
Install the adb and fastboot drivers from google. If you are on windows 10 or greater then you can also use "windows update > optional updates" to update adb and fastboot drivers + edl drivers. For the installation of drivers always use trusted sources and don't turn of driver signature enforcement if you can.
Extract the platform tools in a convenient folder, we will be doing our operations from this folder for fastboot and adb opeartions. Extract the fastboot ROM and place that in convenient folder as well. And for xiaomi flash tool extract the zip and launch XiaoMiFlash.exe .
If you can access fastboot in you phone then the phone can be booted into edl mode through fastboot else you have to take out back cover and short the testpoint pins to make the device boot into edl mode (see the attached image ).
If you can access fastboot. Boot into fastboot and type the following command in terminal.
To check if device is connected properly and drivers are properly installed
If no devices is shown then connect device properly with good usb cable and check the drivers.
Code:
fastboot devices
To boot phone into edl mode. This is only possible if the bootloader is unlocked else testpoint-edl is the only option
Code:
fastboot oem edl
The device should be shown as COM device in device manager ( Windows ). If not then either drivers aren't installed properly or your phone isn't in edl mode.
Now click on refresh button in xiaomi flash tool. Your device should be recognized as com device. Set the path to the images folder ( extracted fastboot rom ). Select CLEAN ALL option . If everything is good then click
on FLASH. The flashing process should start now. After the process completes keep pressing power button to boot device into the currently installed ROM.
Just install the rom and setup once even if you're going to flash custom rom next. This reduces various problems which may come in custom ROMs.
If any error occurs then try the following:
Make sure you are using latest flash tool.
Good fastboot rom (shouldn't be corrupted )
Good USB cable and try different ports of the PC.
The flashing should be done immediately after booting to edl. If not then take out battery and reconnect it if you have back cover open(In case of hard brick). Or keep pressing power button and volume down to boot into fastboot and boot to edl mode again from the above instructions(If fastboot is accessible)
For booting to edl using testpoint:
> Take out backcover
> Disconnect battery
> Short the pins
> Flash
> Connect battery after flashing is complete
> Keep pressing power button to boot into system.
qdl flashing ( linux only )
For very detailed guide github -> bkerler edl
Thanks to DEFXZ and LinkBoi for suggesting this alternative.
Make sure you have platform tools, fastboot rom and other prerequisites to detect device properly.
clone the repository in convenient place
Code:
git clone https://git.linaro.org/landing-teams/working/qualcomm/qdl.git --depth=1
change to qdl directory
Code:
cd qdl
Build qdl tool
Code:
make
Finally flash the rom
Code:
./qdl --storage emmc --include /path/to/stock/images /path/to/stock/images/prog_emmc_firehose_8953_ddr.mbn /path/to/stock/images/rawprogram0.xml /path/to/stock/images/patch0.xml
The paths are the paths to various files inside the images folder which will be obtained after fastboot rom is extracted.
For further informations:
Original github link
qdl discussion in XDA
FASTBOOT FLASHING
PREREQUISITES
FASTBOOT DRIVERS
PLATFORM TOOLS
FASTBOOT ROM
GOOD USB CABLE
PC WITH WORKING USB PORT
See this for meeting prerequisites.
Install fastboot drivers, connect device to PC via USB.
Extract platform tools into a convenient folder.
Extract fastboot ROM into a convenient folder.
Go to platform tools folder ( this will contain files and executable like fastboot.exe) and open powershell or any terminal window there
[ shift + right click and select open (powershell) window here ]
Type this command to see everything worked correctly.
Code:
fastboot devices
If not then check every step properly.
Now execute the script to flash the ROM.
Execute flash_all.bat script for windows PC.
Execute flash_all.sh script for linux PC.
If platform tools cannot be accessed system wide then.
Code:
./fastboot devices
will provide fastboot devices information.
For flashing drag and drop flash_all.bat or flash_all.sh file into the terminal.
Code:
'/media/user001/user/daisy/stock_roms/daisy_global_images_V10.0.18.0.PDLMIXM_9.0/flash_all.sh'
It will look something like this in linux and similar in windows.
If any error occurs the search for particular error. Most of the times the error is due to corrupted fastboot ROM or bad connection between phone and PC.
FINALLY! FLASHING CUSTOM ROM
STEP 0
Flash(if not flashed already) the stock base recommended by particular ROM, if the ROM doesn't recommend a specific stock base flash 10.0.18.0 from the above instructions.
PREREQUISITES
TWRP or ORANGE FOX RECOVERY
Fastboot drivers and platform tools (details above )
The ROM which you want to flash, choose from here
GAPPS package if rom is vanilla and you want to install it.
Magisk if you want to root.
As you may have known by experience, our device doesn't have recovery partition so, flashing recovery through fastboot isn't possible. For flashing recovery first we need to boot recovery image and then only we can flash it.
If you want to use twrp:
Download both twrp*.zip and twrp*.img and place it in a convenient place.
If you want to use orange fox recovery:
Download orangeFox*.zip and extract it.
Keep both the .zip and .img file in convenient place.
If you have sdcard then copy ROM file, gapps, magisk, twrp or orange fox files into sdcard.
If not then there will be further instructions.
Now, connect the phone to the PC via USB and enable usb debugging. And open terminal in the platform tools folder as in above instructions.
Check device connectivity:
Code:
adb devices
Reboot into fastboot:
Code:
adb reboot bootloader
Check device connectivity:
Code:
fastboot devices
Lets check if the bootloader is unlocked:
Code:
fastboot oem device-info
If bootloader isn't unlocked you won't be able to flash custom recovery into the device. So, first unlock the bootloader. This should be allowed in the developers option of your phone first. This will factory reset the device.
Code:
fastboot oem unlock
Now if everything is good then it's time to boot into custom recovery:
Code:
fastboot boot recovery.img
recover.img is name of image of whichever custom recovery you want to use.
Code:
fastboot boot '/media/user001/storage (1)/daisy/twrp/twrp-3.5.2_9-2-daisy-unofficial.img'
It's like this in my case. You can drag and drop after typing fastboot boot
The phone should now boot into custom recovery. If it ask for decryption then your lockscreen password should work there.
if you want to flash recovery only then find the recovery.zip you want and flash it.
The steps further is also valid for moving between different custom roms. The term used for such process is CLEAN FLASH.
For Flashing custom ROMS :
SOMETIMES FLASHING INSTRUCTIONS MAY DIFFER SO, BE SURE TO CROSS CHECK FOR INSTRUCTION IN ROM SPECIFIC XDA THREAD OR TELEGRAM GROUP
The following action will wipe userdata if not wiped already. Be sure to backup data before these steps. Also if you encounter any future problems full backup from custom recovery may be able to solve most of the problems. So, be sure to keep full backup(including every partition) of your device.
Go to main menu > wipe > select all except internal storage and microSD.
Swipe right to perform wipe.
Install custom recovery by flashing recovery.zip
(This is done in case adb push doesn't work below and sdcard isn't available for flashing)
Again go to main menu > wipe > format data
Type yes and press enter.
If you don't have files in your sdcard then:
push rom file + gapps + other files into your device through adb push.
The command will be something like this:
Code:
adb push '/media/user001/storage (1)/daisy/posp/potato_daisy-11-20210919-dumaloo.v4.2.3+20.Community.zip' /sdcard
If adb push fails to work then you can reboot recovery and simply copy the files through file explorer.
Reboot to recovery only if you had installed recovery after wiping system else the device will soft brick
Now flash the rom.zip by selecting the file and swiping right.
Flash custom recovery if the ROM doesn't contain recovery
We have to change current slot even if we don't want to flash anymore things.
Latest recoveries changes slot automatically So, go to main menu > reboot > recovery
Now flash files which you want to flash i.e. gapps and magisk.
Again, Don't flash gapps if the ROM is of Gapps variant
Most of the roms now have implemented FBE (File Based Encryption ). So, you need to format data before rebooting to system. Again, check for specific ROM installation instruction if that is required or not. If you keep data from previous ROM that won't be considered a clean flash so, for proper clean flash format data before rebooting to system.
reboot system
MOVING BETWEEN DIFFERENT VERSION OF SAME CUSTOM ROM
Dirty flash or OTA
Most of the newer ROMs have seamless update ( even the unofficial ones ). The OTA update is simple. Just go to updater ( in settings > system or native app, depends upon the rom). If your ROM is of vanilla version then make sure gapps and/or magisk which you have installed, your ROM and custom recovery all support addon.d survival script. If they don't then you may have to flash everything again after update process is complete.
If custom recovery itself doesn't support update then you may need to choose different recovery or dirty flash ROM from the recovery. Don't worry most of the roms and both the recoveries for daisy support OTA and addon.d survival.
DIRTY FLASHThe process of flashing a ROM on top of existing one keeping the /data partition intact is known as dirty flashing. Such flashing must be done only on different builds of same ROM and it isn't recommended to flash build of lower version on top of higher version.
The steps for dirty flashing:
Download the update package.
Reboot to recovery
Enter password for decryption if encrypted.
Flash the update.zip package.
Reboot recovery, if recovery/rom doesn't support survival of recovery then flash recovery before rebooting to recovery.
If gapps and/or magisk survival isn't supported then flash gapps and magisk, make sure gapps is of the same type which was flashed before.
reboot system
Hi @user-001 thanks for this.
I'm on a stock A2 lite thats never had anything done to it , am i right in thinking i follow the clean flash section ?
You mention in there
We have to change current slot even if we don't want to flash anymore things.
Click to expand...
Click to collapse
I'm not fully sure what that involves could you break it down the steps a little for me.
I've downloaded all the files and am set up but i'm unsure on the Flashing fastbbot section where you say to use these files..
Execute flash_all.bat script for windows PC.
Click to expand...
Click to collapse
Is this a section i can bypass ? if not where can i get them from ?
Cheers
steve.loveday said:
Hi @user-001 thanks for this.
I'm on a stock A2 lite thats never had anything done to it , am i right in thinking i follow the clean flash section ?
You mention in there
I'm not fully sure what that involves could you break it down the steps a little for me.
I've downloaded all the files and am set up but i'm unsure on the Flashing fastbbot section where you say to use these files..
Is this a section i can bypass ? if not where can i get them from ?
Cheers
Click to expand...
Click to collapse
1) Yes you should follow clean flash instructions.
2)Changing of slot is done in custom recovery. Precisely in the reboot menu. But newer recoveries automatically switch the slot after flashing the rom , just be sure to reboot to recovery after flashing the recovery zip file.
3) the flash_all.bat script will be inside the extracted rom(fastboot rom) folder. You can use xiaomiflash too for flashing through fastboot.
user-001 said:
1) Yes you should follow clean flash instructions.
2)Changing of slot is done in custom recovery. Precisely in the reboot menu. But newer recoveries automatically switch the slot after flashing the rom , just be sure to reboot to recovery after flashing the recovery zip file.
3) the flash_all.bat script will be inside the extracted rom(fastboot rom) folder. You can use xiaomiflash too for flashing through fastboot.
Click to expand...
Click to collapse
Hi thanks for the reply,
I'm getting confused with all the various guides all seem to want you to do it a different way.
As i'm wanting Lineage thier instructions are...
Installation:
Download the latest build from here
Download LinkBoi00's version of TWRP here
Reboot to bootloader (adb reboot bootloader)
Fastboot into TWRP recovery (fastboot boot twrp*.img)
Do a factory reset in TWRP
Flash the latest build of Lineage OS
Boot into your new phone
Click to expand...
Click to collapse
Theres no mention of the edl or fastboot flashing and also the fastbot rom i downloaded doesnt have the flash_all.bat script in the zip file.
So do i follow thier instructions or these ones ?
Cheers
steve.loveday said:
Theres no mention of the edl or fastboot flashing and also the fastbot rom i downloaded doesnt have the flash_all.bat script in the zip file.
So do i follow thier instructions or these ones ?
Cheers
Click to expand...
Click to collapse
This guide deals with how to do something rather than what to do, meaning you should always do what particular rom suggests but the way to do this is mentioned here.
edl or fastboot flashing comes under clean flashing with new base, most of the time you aren't required to do this.
The script should be clean_all.bat or something similar just don't execute script with lock in the name(it will lock the bootloader)
And if you're already on the recommended base you don't have to flash the fastboot rom.
First of all, thank you very much for the detailed guide. What you have done here took a lot of work to do but it will help a lot of people (including me) to understand, albeit rudimentarily, the structures and functions of the devices etc.
For all that, thanks again.
When I start using the guide, I will update this post with any questions, such as :
fastboot boot '/media/user001/storage (1)/daisy/twrp/twrp-3.5.2_9-2-daisy-unofficial.img'
why not doing below? (For those who, like me, are not very familiar with linux.)
1. > adb push <twrp.img> /sdcard or same adb push "C:\platform-tools\twrp-3.5.2_9-2-daisy-unofficial.img" /sdcard
( which means push <file> from "adb|platform-tools\ folder" (eg. C:\platform-tools\)
into the root of <internal storage> | /storage/emulated/0 )
2. Reboot from adb to fastboot:
> adb reboot bootloader
3. Boot the image from <internal storage>:
> fastboot boot /sdcard/twrp-3.5.2_9-2-daisy-unofficial.img
What is the "Red" pointed and "Yellow" addresses"?
fastboot boot '/media/user001/storage (1)/daisy/twrp/twrp-3.5.2_9-2-daisy-unofficial.img'
I followed your "EDL FLASHING" post (#2) and it worked exactly as you mention!
In short, I was comming from unsuccessful flashing... but this is out of topic.
For me, did not worked the first time (after restarts) but the other day worked perfect.
The point is, most of times, it's becase windowz drivers.
We have to point that windowz needs their time to take the drivers in place. So, be patient and leave windowz to (not forced) restart(s).
AntonyMan said:
What is the "Red" pointed and "Yellow" addresses"?
fastboot boot '/media/user001/storage (1)/daisy/twrp/twrp-3.5.2_9-2-daisy-unofficial.img'
Click to expand...
Click to collapse
That must be your terminal representing different type of character in different colors.
Or, Are you talking about something else ?
steve.loveday said:
Theres no mention of the edl or fastboot flashing and also the fastbot rom i downloaded doesnt have the flash_all.bat script in the zip file.
So do i follow thier instructions or these ones ?
Cheers
Click to expand...
Click to collapse
For future references, the extracted fastboot ROM should be like this and you need to execute flash_all.bat or flash_all.sh script depending upon your OS or terminal.
user-001 said:
That must be your terminal representing different type of character in different colors.
Or, Are you talking about something else ?
Click to expand...
Click to collapse
Of course I'm talking about something else. lol
I was talking about that 'strange' address. fastboot boot '/media/user001/storage (1)/daisy/twrp/twrp-3.5.2_9-2-daisy-unofficial.img' (explained in post #11)
There is not such a directories in my miA2Lite phone. Obviously, it's because you are on Linux or Mac (UNIX). On Windowz 'command prompt' syntax it's slightly different.
Thus, I typed fastboot boot "/sdcard/twrp-3.5.2_9-2-daisy-unofficial.img"
* /sdcard is the root of <internal storage> directory.
** On Windows, double quote the address, if it's include spaces.
AntonyMan said:
Of course I'm talking about something else. lol
I was talking about that 'strange' address. There is not such a directories in my miA2Lite phone.
Thus, I typed fastboot boot "/sdcard/twrp-3.5.2_9-2-daisy-unofficial.img"
* /sdcard is the root of <internal storage> directory.
** On Windows, double quote the address, if it's include spaces.
Click to expand...
Click to collapse
The twrp image was on my pc(linux) i was booting directly from pc's terminal. And if you use only adb(or fastboot) then the paths are pc's absolute paths.
Home
Twrp recovery for Tecno kg8
NOTE:
This Recovery is Built from sources. It's Not a Port. It is Tested and working fine.
INSTALLATION:
1. Download Auto TWRP installer zip from below and unzip the file.
2. COPY THE STOCK boot.img in your internal storage or external storage.
3.0 Connect Mobile Withe Pc using Data Cable.
3. Unzip folder open and flash.bat click
4.cmd topup open and type y enter.
5.twrp flash and boot into TWRP
6.Install option -> stock boot.img flash and back.
7.Advance option->flash current twrp and back.
8.Reboot options -> recovery click wait reboot recovery
9.wipe option ->format data->yes typing then enter and back
10.Reboot options -> recovery click wait reboot recovery
11.Install options ->sdcard to Magisk.zip flash .
12.reboot-system
13.phone on
14.Magisk app opens and update
15.success Twrp and root
DOWNLOADS:
TWRP
Stock Boot Img Link :
1. V622
2. V713
3. V722
SOURCES:
TWRP
Device tree
WORKING
Flashing magisk
Back up and restore ( back up your Imei )
Back UP System Vndor and rename img to flash work
Android 11-13 Twrp work
Mtp work
Otg work
Twrp booted
virtual A/b
Bug
Touch some time not work ( use OTG mouse )
Decryption
data Unable mount (Format data - yes to work)
Fastbootd not work
HIT THANKS BUTTON IF ABOVE INFORMATION IS HELPFUL TO YOU
Twrp build By Parvej
Pls make a video how to install twrp on techno spark 8 pro pls
Parvej789 said:
Twrp recovery for Tecno kg8
NOTE:
This Recovery is Built from sources. It's Not a Port. It is Tested and working fine.
INSTALLATION:
1. Download Recovery.zip from below. Copy to adb folder.
2. COPY THE STOCK boot.img in your internal storage or external.
commands.
2. adb reboot bootloader
3. fastboot flash vbmeta vbmeta.img
4. fastboot flash boot twrp.img
5. fastboot reboot recovery. wait twrp boot now. twrp open.
6. Install option -> stock boot.img flash.
6. Advance option->flash current twrp
7.Reboot options -> recovery click wait reboot recovery
8. wipe option ->format data->yes typing then enter and back
9. Reboot options -> recovery click wait reboot recovery
10. Install options ->sdcard to Magisk.zip flash(magisk 25.apk rename apk to zip)
11.reboot-system
12. phone on
13. success Twrp and root
DOWNLOADS:
TWRP
SOURCES:
TWRP
Device tree
Click to expand...
Click to collapse
Showing twrp not install
{Mod edit: Quotation fixed - Oswald Boelcke}
Anik111 said:
Pls make a video how to install twrp on techno spark 8 pro pls
Showing twrp not install
{Mod edit: Quotation fixed - Oswald Boelcke}
Click to expand...
Click to collapse
Wait some time bro.
pls make a video full method as very soon
Anik111 said:
pls make a video full method as very soon
Click to expand...
Click to collapse
Ok bro
Its working in tecno spark 8 pro kg8-Gl builder number is/KG8-H698CDEFGH-R-GL-220620V722/ it will work or not