Flash SU via twrp on broken os? - Moto G 2015 Q&A, Help & Troubleshooting

Hello i am currently on Broken OS ROM 6.0 can i just download a SU zip and flash it via TWRP without any problems? just do not want to get into a bootloop.
Also what version of SU should i flash?

MimzyDesigns said:
Hello i am currently on Broken OS ROM 6.0 can i just download a SU zip and flash it via TWRP without any problems? just do not want to get into a bootloop.
Also what version of SU should i flash?
Click to expand...
Click to collapse
Yes you can flash SU.
Use the latest version (2.79).
But still take a backup just in case something goes wrong.

MimzyDesigns said:
Hello i am currently on Broken OS ROM 6.0 can i just download a SU zip and flash it via TWRP without any problems? just do not want to get into a bootloop.
Also what version of SU should i flash?
Click to expand...
Click to collapse
Discussion and support of BrokenOS is not permitted here. Please go to there official forums or G+ group.

Related

[Q] Cyanogen mod 12.1 update SU binary fail

Hi, I am using the latest cm12.1 nightly and I have probelms updating my SU Binary. If I click the normal installation process is fails and if I use the twrp option it does nothing (does not boot into twrp). SU Version v2.46, android version 5.1.1
Please help!
dec1153 said:
Hi, I am using the latest cm12.1 nightly and I have probelms updating my SU Binary. If I click the normal installation process is fails and if I use the twrp option it does nothing (does not boot into twrp). SU Version v2.46, android version 5.1.1
Please help!
Click to expand...
Click to collapse
Reflash SuperSU using the flashable zip

Smart Ultra 6 - ROM 6.0.1. with ROOT

Hi i decided to post here the way to get the latest update ( 6.0.1 ) for VSU6 with ROOT.
First you need to be root and to have Custom recovery on your VSU6.
Then download the vsu6.zip, inside you'll find the stock ROM modded by me and SU.zip.
Reboot on your recovery, install the ROM its going to take a while so be calm and wait when finishes DO NOT REBOOT.
Install SU.
Now you can REBOOT your phone normally AGAIN ITS GOING TO TAKE A WHILE TO START but there you have it Smart Ultra 6 with root.
https://mega.nz/#!kYYWAQZY!HQCa5pLwSc19tkn4bt-UgqaU_rFg3-sgY0tUwUmYO0U
https://forum.xda-developers.com/showpost.php?p=71787674&postcount=117 first cm13
hello
i have 995N with 6..0.1 stock and i need root. pls share how to root
thanks
samukaPedro said:
Hi i decided to post here the way to get the latest update ( 6.0.1 ) for VSU6 with ROOT.
First you need to be root and to have Custom recovery on your VSU6.
Then download the vsu6.zip, inside you'll find the stock ROM modded by me and SU.zip.
Reboot on your recovery, install the ROM its going to take a while so be calm and wait when finishes DO NOT REBOOT.
Install SU.
Now you can REBOOT your phone normally AGAIN ITS GOING TO TAKE A WHILE TO START but there you have it Smart Ultra 6 with root.
https://mega.nz/#!kYYWAQZY!HQCa5pLwSc19tkn4bt-UgqaU_rFg3-sgY0tUwUmYO0U
Click to expand...
Click to collapse
And if I have a 5.1.1 (ES02b version) with root, how update? I can update with SD?
samukaPedro said:
Hi i decided to post here the way to get the latest update ( 6.0.1 ) for VSU6 with ROOT.
First you need to be root and to have Custom recovery on your VSU6.
Then download the vsu6.zip, inside you'll find the stock ROM modded by me and SU.zip.
Reboot on your recovery, install the ROM its going to take a while so be calm and wait when finishes DO NOT REBOOT.
Install SU.
Now you can REBOOT your phone normally AGAIN ITS GOING TO TAKE A WHILE TO START but there you have it Smart Ultra 6 with root.
https://mega.nz/#!kYYWAQZY!HQCa5pLwSc19tkn4bt-UgqaU_rFg3-sgY0tUwUmYO0U
Click to expand...
Click to collapse
Hi can u give me another link this link some how i can not download
mps5566 said:
Hi can u give me another link this link some how i can not download
Click to expand...
Click to collapse
Hi! For the moment i dont have other link im working maybe later i can give you another keep trying this one its working: https://mega.nz/#!kYYWAQZY!HQCa5pLwSc19tkn4bt-UgqaU_rFg3-sgY0tUwUmYO0U
Thank you!
samukaPedro said:
Hi! For the moment i dont have other link im working maybe later i can give you another keep trying this one its working: https://mega.nz/#!kYYWAQZY!HQCa5pLwSc19tkn4bt-UgqaU_rFg3-sgY0tUwUmYO0U
Thank you!
Click to expand...
Click to collapse
Thanks for quick reply but some how i can not download this link very strange
i have vodafone smart ultra 6 after flash twrp recovery always stay on recovery i think if i flash ur rom it should fix my phone.
Can I use Odin?
İnstall qfill program
https://mega.nz/#!FZkRSKIA!p2Y9x0JSSDy9lGj0uFHn-lW14DyuxHh4DocBhxqVHf8
and install twrp for qfil
https://mega.nz/#!5B1CCDwA!X7daokxhM1XpiZoSebq5f-wwau4byED60ExCp8tDFG4
and instal su for twrp
https://mega.nz/#!oU8CTCTQ!naklNI7kaoiZz_JaZVcECBx9gFjyjpb4IsTkjffh2VM
and reboot phone...
Need help to downgrade the ultra six to 5.1.1 to root it currently 601
nomad16 said:
İnstall qfill program
https://mega.nz/#!FZkRSKIA!p2Y9x0JSSDy9lGj0uFHn-lW14DyuxHh4DocBhxqVHf8
and install twrp for qfil
https://mega.nz/#!5B1CCDwA!X7daokxhM1XpiZoSebq5f-wwau4byED60ExCp8tDFG4
and instal su for twrp
https://mega.nz/#!oU8CTCTQ!naklNI7kaoiZz_JaZVcECBx9gFjyjpb4IsTkjffh2VM
and reboot phone...
Click to expand...
Click to collapse
Does this work to root stock 6.0.1 directly?
no one can provide an active link please?

[ROM][8.0][OFFICIAL] Asus Firmware [Stock][20180212]

ASUS STOCK ROM ANDROID 8 OFFICIAL - ZENFONE 3 ZE552KL AND ZE520KL
Install TWRP Recovery 3.2.0 Or stock Recovery Oreo
Flash The Rom:
Direct Link Zenfone 3 ZE552KL
Direct Link Zenfone 3 ZE520KL
:laugh::laugh::laugh::laugh::laugh:
Is possible add root to original rom? I have last nougat whit root and trv recovery. Is possible flash rom oreo .zip whith root integrate.
No you need to flash it white stock recovery
@magicozero
Do you have the ze552kl or the ze520? I can try to do it for the ze552 since I have that model.
@Rasque
If you can flash with stock recovery, you can flash with twrp. It has been discussed many times, and I flashed Oreo with twrp so I am speaking from personal experience.
wang1chung said:
@magicozero
Do you have the ze552kl or the ze520? I can try to do it for the ze552 since I have that model.
@Rasque
If you can flash with stock recovery, you can flash with twrp. It has been discussed many times, and I flashed Oreo with twrp so I am speaking from personal experience.
Click to expand...
Click to collapse
Can u put room on this oreo rom for ze552kl to avoid unlock bootloader?
ehbm said:
Can u put room on this oreo rom for ze552kl to avoid unlock bootloader?
Click to expand...
Click to collapse
what do you mean by "put room"? If you don't want to unlock your boot loader, you can still flash the stock unmodified rom through stock recovery.
If you don't want to unlock, you can try booting (not flashing) twrp through fastboot and then flash magisk. I've never tried it so I'm not sure if it'll work.
this rom can be flashed by twrp???
mcyorian said:
this rom can be flashed by twrp???
Click to expand...
Click to collapse
No, just with the original recovery.
@kiq1702 @mcyorian
Yes, you can flash it with twrp. Edit the updater script, it works fine. I don't think I've ever used the stock recovery to flash anything, went straight to twrp and never looked back.
mcyorian said:
this rom can be flashed by twrp???
Click to expand...
Click to collapse
Yes, you can. No need to edit script or anything but before reboot you need to flash magisk or it wont boot.
You don't need any kind of recovery to install this update. Just download the rom file from asus website, put it in the main folder of your zenfone3 (remember the main folder, not the downloads. if you download the update from your phone it will directly go to downloads folder, so you have to move the update file to main folder) and in couple of seconds you will get a notification that says new update found. And it will update itself. You don't have to flash anything with any kind of recovery.
Only thing to pay attention is when you are downloading the update from official website which is HERE choose the World Wide (WW) version.
iceboy91 said:
You don't need any kind of recovery to install this update. Just download the rom file from asus website, put it in the main folder of your zenfone3 (remember the main folder, not the downloads. if you download the update from your phone it will directly go to downloads folder, so you have to move the update file to main folder) and in couple of seconds you will get a notification that says new update found. And it will update itself. You don't have to flash anything with any kind of recovery.
Only thing to pay attention is when you are downloading the update from official website which is HERE choose the World Wide (WW) version.
Click to expand...
Click to collapse
But my asis is rooted, unlocked bootloader and twrp Recovery ... it will be work by this method? ( put on main folder)
mcyorian said:
But my asis is rooted, unlocked bootloader and twrp Recovery ... it will be work by this method? ( put on main folder)
Click to expand...
Click to collapse
I believe not, but you can try, if it does not work flash with recovery.
mcyorian said:
But my asis is rooted, unlocked bootloader and twrp Recovery ... it will be work by this method? ( put on main folder)
Click to expand...
Click to collapse
My ZE552KL has unlocked bootloader and TWRP installed. I installed the latest official Oreo firmware with TWRP.
I tried with update way and TWRP way but dont install...
I have ROM on internal SDcard i tried both ROM see in image, but the message is the same...
Skytrotter said:
I tried with update way and TWRP way but dont install...
I have ROM on internal SDcard i tried both ROM see in image, but the message is the same...
Click to expand...
Click to collapse
You have to edit the update script otherwise it won't work.
Remove the first 6 lines, save and replace it...
stark_br said:
You have to edit the update script otherwise it won't work.
Remove the first 6 lines, save and replace it...
Click to expand...
Click to collapse
Can i install the latest oreo even without latest nougat using twrp? Or is it recommend to install latest nougat before proceeding with oreo, but I think i can install it without on latest nougat so plss enlighten me
stark_br said:
You have to edit the update script otherwise it won't work.
Remove the first 6 lines, save and replace it...
Click to expand...
Click to collapse
no i dont edit, and i dont know how to edit, where i can found the way for edit?
Skytrotter said:
I tried with update way and TWRP way but dont install...
I have ROM on internal SDcard i tried both ROM see in image, but the message is the same...
Click to expand...
Click to collapse
Which twrp did you use?
[email protected]@ said:
Which twrp did you use?
Click to expand...
Click to collapse
3.0.2-0

System Update with hidden Root

Hello guys, first Sry for my bad English...
I have an wired idea but I don't know it's Funktion or not because of that I quest you guys and hope that anybody have experience with these.
How anybody who use magisk know, you can hide your root to apps and system too, when I hide the root to system update then he only want to download an ~300 MB update (actually installed version: 1.5.6 because the problem in 1.5.7/8 (original os and no twrp installed)). Also it is possible to update my system at these way and I have root after the update or what can happen?
Your Patrick
Xyz00777 said:
Hello guys, first Sry for my bad English...
I have an wired idea but I don't know it's Funktion or not because of that I quest you guys and hope that anybody have experience with these.
How anybody who use magisk know, you can hide your root to apps and system too, when I hide the root to system update then he only want to download an ~300 MB update (actually installed version: 1.5.6 because the problem in 1.5.7/8 (original os and no twrp installed)). Also it is possible to update my system at these way and I have root after the update or what can happen?
Your Patrick
Click to expand...
Click to collapse
To keep root with an update, you need to flash the full update in TWRP, reflash TWRP, reboot recovery then reflash root. Otherwise, you will need to do the steps all over again every time you update to get root back.
mikex8593 said:
To keep root with an update, you need to flash the full update in TWRP, reflash TWRP, reboot recovery then reflash root. Otherwise, you will need to do the steps all over again every time you update to get root back.
Click to expand...
Click to collapse
Thanx
Thanks for the fast answer
Also what I have to do now is:
1. Download the actual OS
2. Change recovery with twrp
Reboot recover
3. Flash OS with twrp (first full clean?)
4. Flash twrp
5. Reboot to recovery and flash magisk
Did I lose at these way my data? Or did I do here an dirty flash? When yes what data recovery tool do you recommend? Titanium?
And after these, I can update my device per OTA updates and I don't lose my root?
Xyz00777 said:
Thanx
Thanks for the fast answer
Also what I have to do now is:
1. Download the actual OS
2. Change recovery with twrp
Reboot recover
3. Flash OS with twrp (first full clean?)
4. Flash twrp
5. Reboot to recovery and flash magisk
Did I lose at these way my data? Or did I do here an dirty flash? When yes what data recovery tool do you recommend? Titanium?
And after these, I can update my device per OTA updates and I don't lose my root?
Click to expand...
Click to collapse
You can install TWRP or you can just install the OTA and then just follow steps to root again the same you did before.
mikex8593 said:
You can install TWRP or you can just install the OTA and then just follow steps to root again the same you did before.
Click to expand...
Click to collapse
So what i done is:
downlaod OS
temp recovery with twrp
flash OS
start os (now warnigns or anything all okay)
temp recovery with twrp again
flash magisk
reboot system
and now i got the message that my system have an internal problem and i have to go to the developer.
What I did wrong?
Xyz00777 said:
So what i done is:
downlaod OS
temp recovery with twrp
flash OS
start os (now warnigns or anything all okay)
temp recovery with twrp again
flash magisk
reboot system
and now i got the message that my system have an internal problem and i have to go to the developer.
What I did wrong?
Click to expand...
Click to collapse
Flash magisk 16.4.

TWRP on Android 10

After recently bricking my Oneplus 6 by trying to flash the latest TWRP on the latest Android 10 OTA from Oxygen Updater, I found a post from official TWRP explaining how root with a10 will take a while to implement due to changes that Google has made to their partitions.
So I guess for anyone trying this out on their own, be warned. You will probably end up bricking your device like I did and will probably end up having a bad time.
Please correct me if i'm wrong though, peace!
Edit: can confirm fastboot flash boot twrp-3.3.1-11-enchilada-Q-mauronofrio.img from the other popular post is working!
If you already have a working TWRP on OOS 9 you should be fine as long as you flash a working TWRP afterwards. Blu_spark TWRP 9.101 is compatible (please not 9.101 no earlier version will work).
Also don't use Magisk 20 only 20.1.
There is already a pre-patched version out there. You can fastboot flash it (as fastboot boot doesn't work). An easier way (without a pre-patched version) is currently being worked one as you pointed out already
just updated to a10
boot into twrp, flash new bluspark twrp
flash FULL ota a10 image
reflash twrp
reboot into twrp
boot into system
boot back to twrp
install magisk 20.1
a10, twrp and root working
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
nightfury04 said:
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
Click to expand...
Click to collapse
havent lost data and you can root again
Blu_spark twrp
could you please provide link for blu_spark twrp img, zip files that work with android 10?
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
nightfury04 said:
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
Click to expand...
Click to collapse
nope
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
akri1337 said:
nope
Click to expand...
Click to collapse
It would be of great help if you could provide link to working TWRP with android 10.
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
akri1337 said:
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
Click to expand...
Click to collapse
Which build did u use mate? R108 is not working with android 9, I tried flashing it using my older installed twrp.
It says unsupported android version. And in github r108 says only for android 10.
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
akri1337 said:
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
Click to expand...
Click to collapse
Thanks again mate.. I will give this one a try.
there is a problem with Magisk 20.1, after all flashes the system is booting ok with Magisk working but after I give first program root access and rebooting its stuck on bootloader and not booting to system.
nightfury04 said:
Thanks again mate.. I will give this one a try.
Click to expand...
Click to collapse
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
nightfury04 said:
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
Click to expand...
Click to collapse
Which magisk? Ver 20.1 ?
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
GunFishin said:
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
Click to expand...
Click to collapse
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
chetbiz said:
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
Click to expand...
Click to collapse
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
GunFishin said:
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
Click to expand...
Click to collapse
Yes, you will need to flash twrp with adb and going through the hole process of installing twrp and magisk, but for me its not worked well, after first boot to Android Q with magisk 20.1 and granting some apps root access when I rebooted the phone its not booting to system and going to bootloader, I think its related to some problem with magisk 20.1.

Categories

Resources