Related
Hello
Seeing there is very little info about this model, I decided to make available my findings. Initially I was a bit annoyed with the phone in the start. The "stock" rom was a disaster (malware-ridden, non-official). First I tried to de-bloat that but the whole rom was just bad and unstable. Since then I've learned some things, and newer official builds have surfaced.
Also I should say; this phone is basically a K3 Note with 720p screen (another difference is MT6752M cpu instead of MT6752 in the K3 Note) and it's very similar to the A7000 model.
The best rom I have tried so far is this : VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU ---> DL - This is latest official stock Rom for the 7600 (not 7600M which is Chinese version)
Here is also TWRP recovery with english + chinese language: DL
Rename ROM to "update.zip", use stock recovery and flash (probably best to use stock lenovo recovery first to make sure everything gets flashed, can be flashed with twrp but I suspect it only flashes boot and system), boot it up, finish the setup wizard, turn it off. Use SPflashtool to flash TWRP, turn off again.
Start phone in recovery mode (Press volume Up + Down, and power button. Hold until recovery appears). Now you can flash Gapps (arm64, lollipop 5.0, opengapps.org), SuperSU, xposed arm64 lollipop, etc.
I have been able to get a very pleasing phone doing this. I don't really feel right now that much is missing, and I'm not annoyed by various other problems. Using xposed modules gravity box, GEL settings, Lollipop memory fix, etc.
This Rom has very little bloatware, there are some chinese apps, but they can easily be uninstalled - don't even need root. There are a few more you can uninstall using root if you want, but be careful not to break the system.
I'm not going to explain everything in great detail here. Using SPFlashTool is explained so many other places. Getting supersu and xposed also explained everywhere.
If I could I would integrate all in to one flashable package, but I'm not a rom cooker. Sorry
PS: As you can see in the image, i use iFONT xposed. But I don't enable it as xposed module, that caused problems. I just used it to download a font and applied it. It's system wide, and it works
There's a newer link in post #6 with the latest firmware
There's a newer link in post #10 with TWRP 3.0.2.3
Hi,do you have custom rom for lenovo s8 a7600?
askermk2000 said:
Hello
The best rom I have tried so far is this : VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU ---> - This is latest official stock Rom for the 7600 (not 7600M which is Chinese version)
Here is also TWRP recovery with english + chinese language:
Click to expand...
Click to collapse
sorry, I had to remove your links, because I have small amount of posts and I am not allowed to submit post with urls - even if quoted.
Hi!
Do you know way to install other languages into ROM (or add them and somehow rebuild ROM), I am searching informations for last few days with no succes. The main problem is when international apps using EN for directory, when all information in directory should be in my language (polish). Changing locale helps, but settings are crashing with changed locales..
Also I installed xposed, but system tells me that xposed is not installed... I heard about it from your post and found only version v79 for sdk 21. I need to remove search box from desktop at google now.
Any custom rom for this device ?
Hi everyone, hi @askermk2000
I just received my Lenovo S8 A7600 "Golden Warrior" phone from an Asian vendor, it came with VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU and SuperSU was seemingly installed when I first turned on phone (asked me to update binary).
Specs are MTK6752M 64-bit OctaCore, 2GB RAM, 8GB storage.
Can I install your version VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU through the Lenovo stock recovery/flash (phone) as you suggest?
You mention "not 7600M" so I am not sure...
I also see in other places that there's even a newer VibeUI version VIBEUI_V2.5_1537_5.1978.1_ST_A7600_CU, any idea where to get it and if it is compatible? I cannot find any download link...
Thanks...
konsti said:
Hi everyone, hi @askermk2000
I just received my Lenovo S8 A7600 "Golden Warrior" phone from an Asian vendor, it came with VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU and SuperSU was seemingly installed when I first turned on phone (asked me to update binary).
Specs are MTK6752M 64-bit OctaCore, 2GB RAM, 8GB storage.
Can I install your version VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU through the Lenovo stock recovery/flash (phone) as you suggest?
You mention "not 7600M" so I am not sure...
I also see in other places that there's even a newer VibeUI version VIBEUI_V2.5_1537_5.1978.1_ST_A7600_CU, any idea where to get it and if it is compatible? I cannot find any download link...
Thanks...
Click to expand...
Click to collapse
Hello
It's wise of you to remove that dubious vendor firmware.
Since "A7600M" is a model number, or simply name of the phone, I would be surprised if it doesn't say so anywhere. Look at the packaging, phone and battery compartment etc. If you don't see A7600M anywhere, it's likely not that model.
See here: Lenovo Inquiry Page
At the bottom there you'll find link for the latest official (Full) firmware.
Thank you @askermk2000 for your kind and immediate reply.
This known asian vendor on their page mentions: Lenovo "Golden Warrior" S8 A7600, 4G, LTE, MTK6752M @1.5GHz 64bit OctaCore, 2GB RAM, 8GB storage, 5.5inch HD IPS screen, OTG, Android 5.0 Phone
In settings, the ROM version is: VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU, no bloatware; was surprised to see SuperSU pre-installed but the vendor does have a service (at a cost) to provide pre-rooted phones (which I did NOT order but maybe got).
The (Lenovo) box doesn't mention much, even under the phone I can see a lot of Chinese, so it's definitely for China -- vendor wrote it's unlocked for world use on their page.
The mentioned model is A7600 on the rear, there's only a A838 reference besides model (i.e. QQ-A838-xxxxxx) but not much more than that.
I suspect these may be older stock they wanted to get rid of.
As you can see, the model is (S8) A7600, not A7600M. The chipset has "M" i.e. is MTK6752M.
So can I not use the official latest (full) firmware that you posted, via stock recovery?
Is this not for MTK6752M processor? Will this firmware brick the phone, you think?
Thank you very much in advance!
konsti said:
Thank you @askermk2000 for your kind and immediate reply.
This known asian vendor on their page mentions: Lenovo "Golden Warrior" S8 A7600, 4G, LTE, MTK6752M @1.5GHz 64bit OctaCore, 2GB RAM, 8GB storage, 5.5inch HD IPS screen, OTG, Android 5.0 Phone
In settings, the ROM version is: VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU, no bloatware; was surprised to see SuperSU pre-installed but the vendor does have a service (at a cost) to provide pre-rooted phones (which I did NOT order but maybe got).
The (Lenovo) box doesn't mention much, even under the phone I can see a lot of Chinese, so it's definitely for China -- vendor wrote it's unlocked for world use on their page.
The mentioned model is A7600 on the rear, there's only a A838 reference besides model (i.e. QQ-A838-xxxxxx) but not much more than that.
I suspect these may be older stock they wanted to get rid of.
As you can see, the model is (S8) A7600, not A7600M. The chipset has "M" i.e. is MTK6752M.
So can I not use the official latest (full) firmware that you posted, via stock recovery?
Is this not for MTK6752M processor? Will this firmware brick the phone, you think?
Thank you very much in advance!
Click to expand...
Click to collapse
No, your phone is the right model, as you said "Unlocked for world use", the A7600M only works in china.
MTK6752M is the chipset used - it has nothing to do with A7600M, that there are two M's there is a coincidence.
So you can go ahead and use the latest firmware.
OK for the sake of information to everyone, I did the following:
0. Formatted SD card from within the phone (just to be sure). Then charged battery fully to 100%.
1. Copy (via PC) the latest firmware zip file (currently is VIBEUI_V2.5_1628_5.2186.1_ST_A7600_CU_WC5DAF1811.zip about 1GB size) to root of my SD card. This file looks like a recovery type, but files inside (some IMG, DAT and scatter files) could be flashable from PC (i.e. like SP Flash Tool etc.).
2. Renamed it update.zip
3. Put SD and battery back to phone.
4. Started phone in recovery mode: Pressed Volume Up + Down and Power buttons simultaneously; held them until recovery screen appeared. First, Lenovo logo, then a screen to choose language (Chinese/English); pressed English.
5. Selected the Install Upgrade Pack menu and pressed "YES" to the warning about encrypted phones.
6. Waited for update with circle-type update progress; for some reason it got seemingly stuck at 75% for some period. Waited patiently to finish.
7. I selected "Back" to go and clean user data.
8. Once done, I pressed back touch-button and selected "Restart".
9. Waited to see what happens. Was curiously greeted with a white chinese splash-screen saying "4G" something. Waited...
10. Phone next booted to the usual Lenovo logo, with some chinese text at the bottom and three dots [...] flashing with thin white progress-line (most likely "rebuilding apps"?). This took a while, too.
11. The phone finally went into the wizard in Chinese, and then offered choice of English or Chinese as wizard language.
Wizard finished OK, then went to Settings -> About device -> ROM is upgraded indeed to VibeUI v2.5-1628 and Android 5.0.2.
NOTE: There's a LOT of chinese stuff, unfortunately, I guess it's part of the ROM; obviously this ROM is non-rooted...
However, the asian vendor installed/shipped ROM (VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU) was very light and fast -- I guess a deodex version? Or a VibeUI port?
Many thanks @askermk2000 for your help nevertheless.
Any idea, compared to your experience., if...
a) if your URL for latest firmware is maybe only for China? Your first post photos/screenshots don't have such Chinese apps On this ROM version, the shutdown logo is again that white chinese splash-screen with a big red "4G". Perhaps there's some other version for non-Chinese region?
b) if there's a stock, deodex ROM like that one? How did the Asian vendor find such light ROM, I am curious -- in that shipped ROM version, I had many menu languages. Now I only have English and Chinese as choices
c) if I need TWRP so I can flash Play Store, gapps and SuperSU? I don't think stock Recovery allows for these, any idea?
Cheers mate.
konsti said:
OK for the sake of information to everyone, I did the following:
0. Formatted SD card from within the phone (just to be sure). Then charged battery fully to 100%.
1. Copy (via PC) the latest firmware zip file (currently is VIBEUI_V2.5_1628_5.2186.1_ST_A7600_CU_WC5DAF1811.zip about 1GB size) to root of my SD card. This file looks like a recovery type, but files inside (some IMG, DAT and scatter files) could be flashable from PC (i.e. like SP Flash Tool etc.).
2. Renamed it update.zip
3. Put SD and battery back to phone.
4. Started phone in recovery mode: Pressed Volume Up + Down and Power buttons simultaneously; held them until recovery screen appeared. First, Lenovo logo, then a screen to choose language (Chinese/English); pressed English.
5. Selected the Install Upgrade Pack menu and pressed "YES" to the warning about encrypted phones.
6. Waited for update with circle-type update progress; for some reason it got seemingly stuck at 75% for some period. Waited patiently to finish.
7. I selected "Back" to go and clean user data.
8. Once done, I pressed back touch-button and selected "Restart".
9. Waited to see what happens. Was curiously greeted with a white chinese splash-screen saying "4G" something. Waited...
10. Phone next booted to the usual Lenovo logo, with some chinese text at the bottom and three dots [...] flashing with thin white progress-line (most likely "rebuilding apps"?). This took a while, too.
11. The phone finally went into the wizard in Chinese, and then offered choice of English or Chinese as wizard language.
Wizard finishedOK, then went to Settings -> About device -> ROM is upgraded indeed to VibeUI v2.5-1628 and Android 5.0.2.
There's a LOT of chinese stuff, unfortunately, I guess it's part of the ROM; obviously this ROM is non-rooted.
But the installed/shipped ROM (VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU) was very light and fast -- I guess a deodex version? Or a VibeUI port?
Many thanks @askermk2000 for your help nevertheless. Your photos/screenshots however don't have such Chinese apps...
Any idea, compared to your experience., if...
a) if your linked latest firmware is maybe only for China? The shutdown logo is again that white chinese splash-screen with a big red "4G". Perhaps there's some other version for non-Chinese region?
b) if there's a stock, deodex ROM like that one? How did the Asian vendor find such light ROM, I am curious -- in that shipped ROM version, I had many menu languages. Now I only have English and Chinese as choices
c) if I need TWRP so I can flash Play Store, gapps and SuperSU? I don't think stock Recovery allows for these, any idea?
Cheers mate.
Click to expand...
Click to collapse
Hello again
Yes, the official Chinese rom only has Eng/Chinese language. There may be a way to add more, idk because I only need English. The 4G boot logo is normal, was there on the rom linked in the first post also.
All the Chinese apps (or almost all) can be uninstalled without root permission. I never experience the rom to be less than fast and good, but I always immediately uninstalled the chinese apps, they do me no good anyways.
The rom you where supplied with is what is called ROW (international). If it's possible to get an updated ROW rom idk. All I know is that if you want a clean unhampered ROM, then the one I've shown you is the way to go.
PS: Yes you need custom recovery to flash the other stuff. Here is an updated TWRP: TWRP-3.0.2.3
^^This recovery has wrong device description in build.prop (actually it uses Lenovo K3) as a consequence you will receive error if trying to flash ROM's. So try the old one if you get these errors.
HI everyone, hi @askermk2000 and many many thanks for sharing your TWRP version 3.0.2.3 with us.
I followed this thread on how to root the Lenovo S8 A7600 phone and downloaded the tools needed (SP Flash Tool v5.1452.00 and VCOM drivers) on my Windows 7 laptop; then, installed them accordingly. Many thanks to @XxpikaachuuxX for providing links and steps on his thread!
1. Started up SP Flash Tool with administrator rights.
2. Chose the scatter file that was inside your shared TWRP-3.0.2.3 zip file; recovery image is automatically selected.
3. Shut down phone, remove battery.
4. Made sure all boxes in list were unchecked, except "recovery" then pressed "Download" button.
5 . Plugged phone on USB cable to PC, then inserted battery under the phone, as instructed.
6. Windows made a "USB plugged" sound, then SP Flash Tool detected phone OK and flashed recovery fine (there was the green tick-mark shown!)
7. Removed cable, removed battery, waited 10 seconds, re-inserted battery.
Then, copied to my SD card root folder, via PC (card reader) the following:
a) UPDATE-SuperSU-v2.46.zip
b) gapps-lp-20150211-signed.zip from this thread (lp=Lollipop)
(I had downloaded and installed wrong Gapps for 5.1 Android, but we need 5.0 version for this ROM--silly me. I just re-flashed via TWRP the correct package).
Went into recovery by pressing briefly Power then when the short vibration was felt, pressed VOL+ and VOL- and POWER simultaneously; the pleasant splash-screen of TWRP was shown!
1. Installed the needed SuperSU; then went back.
2. Installed gapps.
3. Wiped cache and Davlik (inside TWRP) then rebooted phone i.e. "system".
4. Waited patiently as it took a few minutes to go on the main Home screen.
5. Created Google account in "Settings" then went straight to "PlayStore" to update all applications, including SuperSU.
6. Ran SuperSU and upon request, updated the binary "normally" and rebooted just fine.
NOTE: In the Wi-Fi detected lists, since my first ever boot of this phone, I get a (fake?) SSID entry "NVRAM WARNING: Err = 0x10" which is apparently easily fixed for other phones. Do you guys you also got that?
A bunch of final questions to you, @askermk2000 when you have time to reply.
1) Does the stock weather display on a Home page work for you? I only get Chinese cities, location doesn't work as it says "city not found". Manual input of e.g. Europe cities doesn't show results, either.
2) Despite removing most via "Settings -> App Manager", any suggestions oh how to remove some further chinese apps that are marked "system app"? This article suggests NoBloat Free, Titanium Backup, System App Remover and App Master. I am not familiar with this approach but for example, "LenovoStore" could be removed...
3) Do you have by any chance the original, black b/g, folding (yes, boring) Lenovo animation boot logo to share? I see there's a file logo.bin for SP Flash Tools but others talk about /system/media/bootanimation.zip file... I ask if you have it, as the "Boot Animations" PlayStore app may not have the stock Lenovo boot. Perhaps flashing it via SP Flash Tool is better?
4) Will you kindly share any updates here to TWRP versions, whenever released? Do you anticipate any update in the coming 1-2 months, for example? (not sure there are bugs in TWRP-3.0.2.3, if any)
5) If there is a newer Lenovo official ROM available (than today) we obviously lose the TWRP recovery if we flash it all via SP Flash Tools; but we keep TWRP recovery if we update to the new ROM via TWRP, correct?
Thank you.
konsti said:
HI everyone, hi @askermk2000 and many many thanks for sharing your TWRP version 3.0.2.3 with us.
I followed this thread on how to root the Lenovo S8 A7600 phone and downloaded the tools needed (SP Flash Tool v5.1452.00 and VCOM drivers) on my Windows 7 laptop; then, installed them accordingly. Many thanks to @XxpikaachuuxX for providing links and steps on his thread!
1. Started up SP Flash Tool with administrator rights.
2. Chose the scatter file that was inside your shared TWRP-3.0.2.3 zip file; recovery image is automatically selected.
3. Shut down phone, remove battery.
4. Made sure all boxes in list were unchecked, except "recovery" then pressed "Download" button.
5 . Plugged phone on USB cable to PC, then inserted battery under the phone, as instructed.
6. Windows made a "USB plugged" sound, then SP Flash Tool detected phone OK and flashed recovery fine (there was the green tick-mark shown!)
7. Removed cable, removed battery, waited 10 seconds, re-inserted battery.
Then, copied to my SD card root folder, via PC (card reader) the following:
a) UPDATE-SuperSU-v2.46.zip
b) gapps-lp-20150211-signed.zip from this thread (lp=Lollipop)
(I had downloaded and installed wrong Gapps for 5.1 Android, but we need 5.0 version for this ROM--silly me. I just re-flashed via TWRP the correct package).
Went into recovery by pressing briefly Power then when the short vibration was felt, pressed VOL+ and VOL- and POWER simultaneously; the pleasant splash-screen of TWRP was shown!
1. Installed the needed SuperSU; then went back.
2. Installed gapps.
3. Wiped cache and Davlik (inside TWRP) then rebooted phone i.e. "system".
4. Waited patiently as it took a few minutes to go on the main Home screen.
5. Created Google account in "Settings" then went straight to "PlayStore" to update all applications, including SuperSU.
6. Ran SuperSU and upon request, updated the binary "normally" and rebooted just fine.
NOTE: In the Wi-Fi detected lists, since my first ever boot of this phone, I get a (fake?) SSID entry "NVRAM WARNING: Err = 0x10" which is apparently easily fixed for other phones. Do you guys you also got that?
A bunch of final questions to you, @askermk2000 when you have time to reply.
1) Does the stock weather display on a Home page work for you? I only get Chinese cities, location doesn't work as it says "city not found". Manual input of e.g. Europe cities doesn't show results, either.
2) Despite removing most via "Settings -> App Manager", any suggestions oh how to remove some further chinese apps that are marked "system app"? This article suggests NoBloat Free, Titanium Backup, System App Remover and App Master. I am not familiar with this approach but for example, "LenovoStore" could be removed...
3) Do you have by any chance the original, black b/g, folding (yes, boring) Lenovo animation boot logo to share? I see there's a file logo.bin for SP Flash Tools but others talk about /system/media/bootanimation.zip file... I ask if you have it, as the "Boot Animations" PlayStore app may not have the stock Lenovo boot. Perhaps flashing it via SP Flash Tool is better?
4) Will you kindly share any updates here to TWRP versions, whenever released? Do you anticipate any update in the coming 1-2 months, for example? (not sure there are bugs in TWRP-3.0.2.3, if any)
5) If there is a newer Lenovo official ROM available (than today) we obviously lose the TWRP recovery if we flash it all via SP Flash Tools; but we keep TWRP recovery if we update to the new ROM via TWRP, correct?
Thank you.
Click to expand...
Click to collapse
About that Wi-Fi problem. No I don't have it, and I was reading that page with the fix. It seems it's caused by using wrong settings in SPFlashtool, so likely the vendor did this when applying his trash firmware.
If you wifi is not working (as some reported in that thread) I would of course try to get a refund.
Weather gadget only has Chinese cities, yes I noticed that so I was using yahoo weather instead on my phone.
I would suggest Titanium Backup, it's what I use.
No, sorry I don't have any boot logos or animations.
This phone is a bit slow on the updates. But if there's an update, you can do it through the OTA update function which only downloads the changes as a patch. Though If your phone is heavily modified it might not work correctly. Could try a factory reset first, or simply start a fresh.
Then you would probably need to download the original recovery and flash that first.
PS: You can break the system by removing too much of the lenovo stuff. Remember VibeUi is heavily integrated and impossible to remove completely. Also, for gapps go to www.opengapps.org
help
Can you help me a bit? I got an infected phone and i need to install a new rom to keep myself safe. (im kinda noob to installing stuff like these)
First bootanimation "china4Gchina", second ok and poweroff ok.
Please help to change to first animation or delete.
Thanks.
Few days ago as expected, official users (who is using CN-EN official ROMs) of Le Pro 3 AI (further mentioned "x7") got an OTA update to the latest release of EUI 6.0.030S.
The miracle that expected was not appeared. It is still based on Android 6.0.1 (Marshmallow).
The ROM is still not localized for other countries, it contains only CN and EN languages.
And there still many bloatware of LeEco services that is very annoyance.
But first of all, the apps inside are now more optimized and as I see, they starting and function faster then previously.
Ok, let's go to the main part - links =)
The Official Site where you can download the ROM based on OTA update scheme is HERE. Also you can download a copy of OTA package from HERE.
But if you want to download faster, you can use my clouds where I'm continuously holding the most of Official ROMs for x7.
---> MEGA (follow into the folder called "original_stock")
---> FEX
Inside my clouds you can find that the ROM filenames contains not only a version but also an appropriate suffix (_OTA or _FASTBOOT). It's used to separate the ROMs by the installation method.
The FASTBOOT prepared ROMs contains an installation scripts (.BAT for Windows and .SH for Linux/Mac) for not only full installation (with clearing of User Storage), but also for update (without clearing of User Storage).
Please be careful, don't even try to install via FASTBOOT without clearing of User Storage, if you currently have functioning non Official multilingual EUI like 5.9.027S (faked as 028S in menu "About phone") or other non official!!! If you'll do this you will get many conflicts in settings and apps.
I expect that the FASTBOOT updating instructions are widely known, but remind them once more:
1) Enable the "Developer options" menu by clicking on "Build number" 7 times in the "About phone"
2) In the "Developer options" menu, turn on "OEM unlocking" and "USB debugging"
3) Connect the phone to the computer with a USB cable
4) Run one of the installation scripts from the folder of the unpacked firmware
5) Immediately upon startup, allow on the phone screen the "USB debugging" permission for your computer, preferably within the checkbox "always trust this device"
6) Wait until the installation process finishes (15-20 mins), calmly referring to the fact that the phone itself will reboot into FASTBOOT mode, and also please ignore the Sparse format error message (it's normal)
7) The phone itself will reboot into a new OS ... the first launch will be very long
Please feel free to ask anything here about the installation process, cloud links etc.
But be ready that I'm not fast answering.
Any other questions including the comparison of EUI versions performance and functionality will be ignored by me.
We still have the device that is highly secured with unknown protection mechanism and that gets us unable to build any quality custom ROM. =|
thank you
I should have researched before buying the device kk was already "lost" trying to find a customized rom for him. this part of the text: "We still have the device that is highly secured with unknown protection mechanism and that gets us unable to build any quality custom ROM. =| " , clarified me a lot
I istalled it but it does not have google play store?
azizo07 said:
I istalled it but it does not have google play store?
Click to expand...
Click to collapse
ROM does not have Google applications. You need install it. I think this still working in this version: https://forum.xda-developers.com/le-pro3/leeco-le-pro3-a1-model-x651-guides-development--and-mods/automated-installer-gapps-morelocale2-t3752576
Ok installed the 30s mod version from https. ://4pda.ru/forum/index.php?showtopic=895159&st= 2020#entry77308634
and it includes gapps.
You can install another launcher to get rid of ads.
There is no root for this rom, right?
azizo07 said:
Ok installed the 30s mod version from https. ://4pda.ru/forum/index.php?showtopic=895159&st= 2020#entry77308634
and it includes gapps.
You can install another launcher to get rid of ads.
There is no root for this rom, right?
Click to expand...
Click to collapse
030S mod is based on APKs of 030S with few modifications... but it also runs the old Boot from version 027S... so it may have some unexpected behavior...
yes, all of these ROMs have no root... but with mods based on Boot of 027S version you can use a temporary root (one time booting into TWRP) for further system modifications and then back to boot with native stock kernel and modified system will run good (expect the problems with apps you may cause by modifications)
hi, how i can install this ROM if I use a non official Rom? I mean, I recived this phone yesterday with a 028s (stable) that is non official, and I want to install this official ROM.
Help please
My cell phone has brick
You have some rom to fix it?
Does the NFC work on this rom? I had 028s before but the NFC was disabled.
Hi im install rom eui 6.0.030s "https://4pda.ru/forum/index.php?showtopic=895159&st=2020#entry77308634"]https://4pda.ru/forum/index.php?showtopic=895159&st=2020#entry77308634 But me phone have in antutu 50000 . Ealier was 100000. What is wrong i see Stock-thermal.zip but i cant dowload . plise help
can't see inside the package "4) Run one of the installation scripts from the folder of the unpacked firmware"
or can i use rename the package to update.zip and run on the system update?
cyzarine said:
can't see inside the package "4) Run one of the installation scripts from the folder of the unpacked firmware"
or can i use rename the package to update.zip and run on the system update?
Click to expand...
Click to collapse
What you can't see? The scripts?
You need to look at the contains of unpacked ROM zip that have suffix "FASTBOOT" in filename. There must be files with names like "x7_fastboot_tool.bat" and "x7_fastboot_tool_noUser.bat" and also same files with ".sh" extensions for Linux.
For installation to start you need to run one of this scripts. To run from CLI (CMD), not by double-clicking on it.
what's the score in antutu in new rom ? I have 50000....
dilnix,
I've downloaded the FULL_X7_X7-CN-FN-KGXCNFN6003009091S-6.0.030S.zip which don,t have the fastboot tools.
Do you have instructions to install this?
Big thank you!
cyzarine said:
dilnix,
I've downloaded the FULL_X7_X7-CN-FN-KGXCNFN6003009091S-6.0.030S.zip which don,t have the fastboot tools.
Do you have instructions to install this?
Big thank you!
Click to expand...
Click to collapse
This is an OTA package. But it's buggy, my try to make a direct update from 028S to this 030S with OTA way was failed, and I heart many reviews about same behavior.
So I think the best way to update is to use Fastboot with scripts and executable provided in my package that contains "_FASTBOOT" suffix in filename.
From there you can use script "x7_fastboot_tool_noUser.bat" (or .sh option in Linux) to make update to 030S (only from clean stock 025S, 026S or 028S, not from fake 027S or any mod) without clearing of Userdata Storage.
Or you can use script "x7_fastboot_tool.bat" (or .sh option in Linux) to make a new installation of 030S with clearing of Userdata Storage (from any other previous ROM).
If you can't download by my links provided in topic, please write here and I'll try to solve this.
grzegorzkuc said:
what's the score in antutu in new rom ? I have 50000....
Click to expand...
Click to collapse
My x650 shows 87000 in antutu on 030S. I can't know what is reason you having less.
Currently my Le pro 3 ai is on non official 5.9.27s I have to downgrade it to 5.9.25s.what should I do. Further I want to update my device to eui 6.0.30s. Any help is highly appreciated .
I think that is 027s custom rom better than this 028s. I recommend you to not change anything.
Sent from my LEX657 using Tapatalk
AmanS99 said:
Currently my Le pro 3 ai is on non official 5.9.27s I have to downgrade it to 5.9.25s.what should I do. Further I want to update my device to eui 6.0.30s. Any help is highly appreciated .
Click to expand...
Click to collapse
As an example of this way how to move into stock 028S with flashing first 025S and then just update to 028S (or 030S if you want) I prepared a video half of year ago. HERE
I understand that not all processes there are perfect... for example I used ADB to push ROM instead of MTP that is much faster =)
But if you have experience and you sure in other option of processing the steps explained in this video - enjoy and good luck.
Hope it will help somebody.
P.S.: Now I have some trouble with focus (can't focus larger then 120 cm) in stock Camera on EUI 030S and have a plan to get 028S back just for testing of Camera and focus processing.
P.S.2.: If you will have desire to get back into custom 027S you had earlier, you always can make it. It's available on both forums (XDA & 4pda). But you need to know, that changing of using between clean stock and custom ROMs is always requires you to clean a Userspace too.
Thanks for your reply . But I want to ask is there is risk of getting brick if anything goes wrong.
At the end of the update in question was published by the official units.
Notice that the beta version is.
resource connection : https://bbs.nubia.cn/thread-1462621-1-1.html
As an informative question: If we update the rooted and installed gapps in all versions, can there be a problem?
For example, you may be deprived of gappa until you have Brick or New root?
chinese english translation is bad because i did not understand.
*Changes*
* JOS updated X-JOS
* Android 8.1 version updated Android 9.0
*System optimization : system performance, enhance the overall fluency
*optimization: system stability
*optimization: Android update security patches
*smart card services added: "fast application" card and enjoy the native application experience the performance of third-party applications
*optimization: Some third-party application stability
*fix: part of the game (the king of glory, to stimulate the battlefield) probability of the emergence of flash back problems
this update optimized content including but not limited to the above-listed items
Note precautions: ● This is a trial version upgrade, only support SD card upgrade package: After you download this version of the full SD card pack, then click on "Settings" -> "System Update" -> "button in the upper right corner function" -> "local upgrade", select SD card pack, click the "install now" wait upgrade is complete;●trial version where there may be imperfections on experience details, please according to their own circumstances choose to upgrade;●upgrade this version P Andrews after, if you want to roll back to previous versions, you need to back up phone data,Shuangqing SD card pack before upgrading history, after the completion of normal use;● Make sure the phone battery before upgrading adequate and mobile phone data backup (recommended use its own backup software), so as not to cause the phone to upgrade data loss; ●before upgrading, cancellation of various screen lock, the upgrade process, make sure the phone flat, and not arbitrarily touch the screen, follow the onscreen prompts ;● as already get Root privileges, be sure to remove the Root privileges, the state returned to normal version, and restore the factory settings before upgrading, otherwise easily lead to the escalation Defeated.
Download Link: http://romdownload.nubia.com/nubiaX/V3.05/NX616J-update.zip
Altarnatife Download Link : https://drive.google.com/file/d/1AqeiP-uQYI5jq7m1SabJ51h1MFn31pkn/edit
Thanks : @Ravira43
MD5 code: 66DD854D61C742326C01200E580E2952
It's not possible to download, tried using china vpn and without.
The download dies after 100mb
Could you upload it to another location (maybe google?)
Ravira43 said:
It's not possible to download, tried using china vpn and without.
The download dies after 100mb
Could you upload it to another location (maybe google?)
Click to expand...
Click to collapse
Hi. I need to ask. What does this mean? Does this include Play Store? Is it a global version?
Or is it just another Chinese ROM?
Thank you!
Ravira43 said:
It's not possible to download, tried using china vpn and without.
The download dies after 100mb
Could you upload it to another location (maybe google?)
Click to expand...
Click to collapse
Used " internet download menager " and search google " idm 16 part download" use.
gigilex said:
Hi. I need to ask. What does this mean? Does this include Play Store? Is it a global version?
Or is it just another Chinese ROM?
Thank you!
Click to expand...
Click to collapse
No, only Chinese ROM. unlucky.
But İnstall new Play store way
1. https://bbs.nubia.cn/thread-1464227-1-1.html
2. https://bbs.nubia.cn/thread-1462852-1-1.html
Never mind, a friend of mine has already downloaded and uploaded it on google.
Can't paste the link, because I'm a new member.
Ravira43 said:
Never mind, a friend of mine has already downloaded and uploaded it on google.
Can't paste the link, because I'm a new member.
Click to expand...
Click to collapse
I'm glad you got the solution.
I can publish the link if you throw it.
Guys I have just received an OTA update 1.4gb version 3.05 on my phone.
I would install it but my fear is to loose all data and settings.
Did anyone installed it?
I've also received the OTA update, I would try it but the chinese links for Gapps are nor working (source download not posssible)
Does anyone know how to unroot the terminal?
When local updating to 3.05, the terminal will brick.
How to install Android 9
I've installed it the following way.
Downloaded the new android version to my Nubia X.
Started localupdate via phone --> settings --> update --> localupdate.
Android 9 installed automatically without problems. Your phone should now be unrooted.
Now you need the Root-toolkit for v3.05 --> works only in windows :/
Connect your phone via usb in fastbootmode (you need to activate usb-debugging before)
Execute the root toolkit v3.05
can't post the link, somebody else have to do it.
a window opens --> close it (can't read chinese language)
another window should open --> klick on root.
wait after "success" appears.
Your phone should be restarting.
I'm using android 9 on my nubia x since a month and its working way better then android 8.
I'm not responsible if you brick your phone.
I give no guarantee
Ravira43 said:
I've installed it the following way.
Downloaded the new android version to my Nubia X.
Started localupdate via phone --> settings --> update --> localupdate.
Android 9 installed automatically without problems. Your phone should now be unrooted.
Now you need the Root-toolkit for v3.05 --> works only in windows :/
Connect your phone via usb in fastbootmode (you need to activate usb-debugging before)
Execute the root toolkit v3.05
can't post the link, somebody else have to do it.
a window opens --> close it (can't read chinese language)
another window should open --> klick on root.
wait after "success" appears.
Your phone should be restarting.
I'm using android 9 on my nubia x since a month and its working way better then android 8.
I'm not responsible if you brick your phone.
I give no guarantee
Click to expand...
Click to collapse
hi i run android 9 on my nubia x rooted, but how can we get Gapps working on it please ? thanks
I have twrp running on it too.
Ravira43 said:
I've installed it the following way.
Downloaded the new android version to my Nubia X.
Started localupdate via phone --> settings --> update --> localupdate.
Android 9 installed automatically without problems. Your phone should now be unrooted.
Now you need the Root-toolkit for v3.05 --> works only in windows :/
Connect your phone via usb in fastbootmode (you need to activate usb-debugging before)
Execute the root toolkit v3.05
can't post the link, somebody else have to do it.
a window opens --> close it (can't read chinese language)
another window should open --> klick on root.
wait after "success" appears.
Your phone should be restarting.
I'm using android 9 on my nubia x since a month and its working way better then android 8.
I'm not responsible if you brick your phone.
I give no guarantee
Click to expand...
Click to collapse
it's ok everything work fine, Nubia x android 9 with all google services OK exept voice match ( OK google from screen).
elnas1369 said:
it's ok everything work fine, Nubia x android 9 with all google services OK exept voice match ( OK google from screen).
Click to expand...
Click to collapse
Yeah I'm also looking for a solution how to remove this ****ty nubia voice and replace it with google.
Yeah it could be nice to replace it with Google assistant
I would install Android 9 but my fear is to loose all configurations, permissions, etc and It will take long time to reconfigure every thing.
My question is : is it really worth to install it or there are more or less the same performance?
Anyone knows if nubia X will have final android 9?
Guys!! I know this sounds stupid but I have no "update" option in my settings!! Please help if you know what is going on with my new Nubia X!
Shahin13 said:
Guys!! I know this sounds stupid but I have no "update" option in my settings!! Please help if you know what is going on with my new Nubia X!
Click to expand...
Click to collapse
Download the rom for Android 9, got to settings -> "System update", then from the menu up, select "Local update".
No issues with 3.05 - works fine, nothings from the apps, data or setting is flushed. But the phone is unrooted and you need to process it again.
But recently I have updated it from 3.03 to 3.11 and I can't find the root tool.
Anyone has idea where to find it?
Thanks.
3.11 play store
Looking allsou the rooting tool for 3.11. Needed play store.
【Version】16.0420.2006.30
【Model Name】ROG Phone (ZS600KL)
【Release Date】2020/08/11
【Release Note】
Improved the audio quality of the speaker when playing games.
3rd party app compability improved: QMZG
Updated Android security patch
Source : https://zentalk.asus.com/en/discuss...e-zs600kl-ww-16-0420-2006-30-android-p#latest
I am looking forward to all the beta testers that will complain about issues in this topic before i upgrade to P in 6 months
I am 99% sure that most things will not work, for example Magisk, edXposed, gravity box......
Anyone got the update?
imkentoy said:
Anyone got the update?
Click to expand...
Click to collapse
nope !!!!!!!!!!!!!!!!!!!!!!!!!!!
User War10K from Zen Talk communities has uploaded the WW Firmware link:
【Version】
16.0410.1910.91
【Model Name】
ROG Phone (ZS600KL)
【Release Date】
2019/11/28
https://www.asus.com/zentalk/forum....extra=page=1&filter=lastpost&orderby=lastpost
krkdesigns said:
User War10K from Zen Talk communities has uploaded the WW Firmware:
【Version】
16.0410.1910.91
【Model Name】
ROG Phone (ZS600KL)
【Release Date】
2019/11/28
https://www.asus.com/zentalk/forum....extra=page=1&filter=lastpost&orderby=lastpost
Click to expand...
Click to collapse
NO he didn´t !!!!
I downloaded the link and it worked perfectly. I have the update and it looks good. thanks for the tip and have a nice weekend
snoopy-doopy said:
NO he didn´t !!!!
Click to expand...
Click to collapse
Technically you're correct; he provided a link. But the link is valid.
I downloaded the file and flashed it, for now it works great
thx
krkdesigns said:
User War10K from Zen Talk communities has uploaded the WW Firmware:
【Version】
16.0410.1910.91
【Model Name】
ROG Phone (ZS600KL)
【Release Date】
2019/11/28
https://www.asus.com/zentalk/forum....extra=page=1&filter=lastpost&orderby=lastpost
Click to expand...
Click to collapse
Thanks for the link. Updated OP
That was a direct download link from asus server.
I've got serval bootloops before it start normally, plus the fist install i needed to format because failed boot, so it's very unstable and i'm also notice there no full stock recovery, but hopefully it will get one on stable.
Edit: it's happend again, it's not safe to use.
No OTA yet in HKG....keeps pressing the update button....
This will work on WW_ZS600KL ?
mauronofrio said:
This will work on WW_ZS600KL ?
Click to expand...
Click to collapse
Offical firmware website:
https://www.asus.com/us/Phone/ROG-Phone/HelpDesk_BIOS/
New update WW-16.0410.1910.95
【Version】16.0410.1910.95
【Model Name】ROG Phone (ZS600KL)
【Release Date】2019/12/16
【Release Note】
Android P to Android P
1. User will encounter a brief black screen last for 3 to 5 minutes (Depending on the amount of data) after it finished the FOTA and reboot. Please do not force reboot the device because of the system has been checking, it would return to normal very soon.
2. Fixed the issue that TwinApps occasional not able to be launched
3. Fixed the Audio wizard can not be used in Russia
4. Fixed display error of Classic Theme Settings
5. Disabled BSNL VoLTE function in India
6. Fixed that screenshot could not be read by computer when device connects with computer
7. Fixed the game of Arena of Valor noise issue when live streaming with front camera
Android O to Android P
1. Upgraded system to Android P
2. User will encounter a brief black screen last for 3 to 5 minutes (Depending on the amount of data) after it finished the FOTA and reboot. Please do not force reboot the device because of the system has been checking, it would return to normal very soon.
3. Removed Page Marker, ZeniMoji, Report Location in Safeguard, weather animation setting, AI charging
4. Removed the Yandex cloud opetion of File Manager Application
5. Upgraded Game Center to Armoury Crate with whole new design
6. Added "Adaptive brightness", "Adaptive Battery", "New notifications", "Status bar icon manager", "Screen recorder", and "Local backup" in Settings
7. Upgraded Game Genie panel with new design and features
8. Added Android P "Swipe up on Home button" gesture
9. Support 24-hour forecast in Weather application
10. Revamped Mobile Manager, Contacts, File Manager, Calculator, Clock, Gallery, and Weather applications
Source : https://zentalk.asus.com/en/discuss...e-zs600kl-ww-16-0410-1910-95-android-p#latest
Do not update to android 9
Issue with phone callsAfter the update to Android pie, call drop in seconds while using bluetooth. This happens with the preloaded app and whatsapp calls.
Can anyone confirm if Volte still work after this update?
every time I tried to sideload the new firmware I get an error message "adb: failed to read command: No error" any suggestions to get it flashed to P?
mbze430 said:
every time I tried to sideload the new firmware I get an error message "adb: failed to read command: No error" any suggestions to get it flashed to P?
Click to expand...
Click to collapse
updating to pie its not working by sideloading you need to save the pie file to your storage and if you cant access your phone you can try flash the latest RAW File just find in other forums.
Well, after trying the RAW file a second time, it is now working. No clue what the deal was before. It shouldn't have even had Magisk installed still after flashing that RAW file, but it did, and was causing the problems.
Second flash actually reset everything. Can't delete this post though.
Model - ROG Phone 5 Ultimate (Possibly ROG Phone 5 as well see here )
2021/11/05
Version Name - WW-18.0840.2109.188
Release Date - 2021/11/05
OTA Download Link - Download
RAW Download Link - PENDING
Stock Boot Image - Download
Magisk Patched Boot Image - Download
Changelog
ROG Phone 5 (ZS673KS) software Image：WW-18.0840.2109.188 for WW/JP/EU/RU only*
This firmware is only for ROG Phone 5 WW/JP/EU version use and not applicable to ROG Phone 5S/5S Pro series models.
Note: Please be patience it's normal when downloading status bar stop a while with large update package.
For WW SKU Improved Item:
1. Optimize the charging experience function
Steps of Update:
1. Check software version of your device**
2. Download device software and Update SOP (From “Manual” Item)
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW.
4. Software update cannot transfer the software SKU and downgrade the software version.
5. Wrong SKU may cause update failure, please update the same SKU version only.
**How to know the device model?
Path: Settings->About-> Model number
Example: ASUS PadFone2
**How to know the device software version?
Path: Settings->About-> software information->Build number
Example: CHT_PadFone2-user-10.4.17.15-UpdateLauncher
**System upgrade may cause part of data missing, please back up your important data before system upgrading.
Click to expand...
Click to collapse
Spoiler
2021/08/24
Version Name - WW-18.0840.2107.151
Release Date - 2021/08/24
OTA Download Link - Download
RAW Download Link - Download
Stock Boot Image - Download
Magisk Patched Boot Image - Download
Changelog
ROG Phone 5 (ZS673KS) software Image：WW-18.0840.2107.151 for WW/JP/EU only*
Note: Please be patience it's normal when downloading status bar stop a while with large update package.
For WW SKU Improved Item:
1.Updated Android security patch to 2021-07
2.Fixed issue with sending MMS messages on Optus Australia
3.Fixed an issue where some videos played through apps would get stuck and without response.
4.Fixed issue where AirTriggers would become insensitive after opening Taobao APP
For JP SKU Improved Item:
1.Updated Android security patch to 2021-07
2.Fixed an issue where some videos played through apps would get stuck and without response.
3.Fixed issue where AirTriggers would become insensitive after opening Taobao APP
Steps of Update:
1. Check software version of your device**
2. Download device software and Update SOP (From “Manual” Item)
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW.
4. Software update cannot transfer the software SKU and downgrade the software version.
5. Wrong SKU may cause update failure, please update the same SKU version only.
**How to know the device model?
Path: Settings->About-> Model number
Example: ASUS PadFone2
**How to know the device software version?
Path: Settings->About-> software information->Build number
Example: CHT_PadFone2-user-10.4.17.15-UpdateLauncher
**System upgrade may cause part of data missing, please back up your important data before system upgrading.
Click to expand...
Click to collapse
*********************************************************************************************************************
2021/07/22
Version Name - WW18.0840.2106.86
Release Date - 2021/07/22
OTA Download Link - Download
RAW Download Link - Waiting
Stock Boot Image - Download
Magisk Patched Boot Image - Download
Changelog
ROG Phone 5 (ZS673KS) software Image：WW-18.0840.2106.86 for WW/JP/EU only*
Note: Please be patience it's normal when downloading status bar stop a while with large update package.
Note: Please be patience it's normal when downloading status bar stop a while with large update package.
Improved Item:
1. Updated Android security patch to 2021-06
2. Fixed an issue where the game would crash when using multiple windows to open the settings and change the system navigation
3. Fixed the problem of broken sound when using screen recording
4. Fixed the problem of low notification sound when using Bluetooth headsets in standby mode
5. Fixed an issue where blocking notifications in the game could not block Facebook messenger notifications
6. Fixed the problem of reduced call volume
7. Fixed the problem of using a microphone to record the voice of a team in the game, and the problem of not being able to record your own voice
8. Fixed the problem that the 5G network cannot be detected when connected to the GT-AX11000 router
9. Fixed a serious delay in the screen when entering the game with Geforce Now
10. Optimize touch experience
11. Fix sound effect for speaker playback.
Steps of Update:
1. Check software version of your device**
2. Download device software and Update SOP (From “Manual” Item)
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW.
4. Software update cannot transfer the software SKU and downgrade the software version.
5. Wrong SKU may cause update failure, please update the same SKU version only.
**How to know the device model?
Path: Settings->About-> Model number
Example: ASUS PadFone2
**How to know the device software version?
Path: Settings->About-> software information->Build number
Example: CHT_PadFone2-user-10.4.17.15-UpdateLauncher
**System upgrade may cause part of data missing, please back up your important data before system upgrading.
Click to expand...
Click to collapse
I would assume it is all the same, since the firmware you posted is
https://dlcdnets.asus.com/pub/ASUS/...S_I005_1-ASUS-18.0840.2106.86-1.1.92-user.zip
and the firmware from https://forum.xda-developers.com/t/new-firmwair-version-ww18-0840-2106-86.4309457/ is also
https://dlcdnets.asus.com/pub/ASUS/...S_I005_1-ASUS-18.0840.2106.86-1.1.92-user.zip
twistedumbrella said:
I would assume it is all the same, since the firmware you posted is
https://dlcdnets.asus.com/pub/ASUS/...S_I005_1-ASUS-18.0840.2106.86-1.1.92-user.zip
and the firmware from https://forum.xda-developers.com/t/new-firmwair-version-ww18-0840-2106-86.4309457/ is also
https://dlcdnets.asus.com/pub/ASUS/...S_I005_1-ASUS-18.0840.2106.86-1.1.92-user.zip
Click to expand...
Click to collapse
It is the same, I'm looking for the RAW File.
JazonX said:
It is the same, I'm looking for the RAW File.
Click to expand...
Click to collapse
Wouldn't it also be the same then?
twistedumbrella said:
Wouldn't it also be the same then?
Click to expand...
Click to collapse
Not really, Once you install an OTA, The Active boot partition switches to the opposite one to boot the new firmware.
If you have Root + TWRP, I find this messy because then you have to manually patch the boot images, and it is usually after a few bootloops and softbricks. There is an option in Magisk, Install to inactive slot. That doesn't work always, at least during my ROG II and ROG III days.
Good thing about the RAW files, They do a clean install without wiping, and you can set it up easily afterwards with the usual magisk and patch steps without losing userdata. For a firmware upgrade I always prefer Raw files.
I actually found a RAW file from a usual source I used to get these, But surprisingly this version is not available in the ASUS site. Its about 3 digits below the current one.
WW_ZS673KS_18.0840.2106.83_M3.13.24.40-ASUS_1.1.92_Phone-user.raw | Download
Well... I can at least take some of your worries... OTAs won't be a thing after you unlocked your bootloader. You need to manually install them via magisk again. So there is no chance these automatic updates will break your phone.
Furthermore you don't have to worry about root + TWRP as well because there is no twrp for this phone and I doubt there will be one in the next time.
But applying updates and keeping root access without loosing your user data should be no problem. Magisk has special options for this and many people here update that way without bootloops and soft bricks.
JazonX said:
Not really, Once you install an OTA, The Active boot partition switches to the opposite one to boot the new firmware.
If you have Root + TWRP, I find this messy because then you have to manually patch the boot images, and it is usually after a few bootloops and softbricks. There is an option in Magisk, Install to inactive slot. That doesn't work always, at least during my ROG II and ROG III days.
Good thing about the RAW files, They do a clean install without wiping, and you can set it up easily afterwards with the usual magisk and patch steps without losing userdata. For a firmware upgrade I always prefer Raw files.
I actually found a RAW file from a usual source I used to get these, But surprisingly this version is not available in the ASUS site. Its about 3 digits below the current one.
WW_ZS673KS_18.0840.2106.83_M3.13.24.40-ASUS_1.1.92_Phone-user.raw | Download
Click to expand...
Click to collapse
I think you completely misunderstood my comment. I was saying that if the firmware for both models is the same, it is likely the raw files for both are the same (but still separate from the firmware).
In addition to what was already pointed out above, you have things backwards. The RAW firmware is intended to be a low-level rebuild. The regular firmware is not an incremental (which I assume is what you were thinking) and comes will a full firmware image every time.
Edit: The version from this thread now includes a separate flash_raw and flash_raw_and_wipe command.
twistedumbrella said:
I think you completely misunderstood my comment, but I am sure someone new will appreciate the explanation (with a few corrections).
In addition to what was already pointed out above, you have things backwards. The RAW firmware is intended to wipe your data, while the regular firmware upgrades are not. The regular firmware is not an incremental (which I assume is what you were thinking) and comes will a full firmware image every time.
Click to expand...
Click to collapse
RAW never wipes data. I've done it for almost 2 years in my ROG II.
That's how I usually update my firmware.
Unless something is changed in ROG 5 ... If yes, Then I'm wrong.
I'm yet to test all these anyway, Since unit is still on the way.
JazonX said:
RAW never wipes data. I've done it for almost 2 years in my ROG II.
That's how I usually update my firmware.
Unless something is changed in ROG 5 ... If yes, Then I'm wrong.
I'm yet to test all these anyway, Since unit is still on the way.
Click to expand...
Click to collapse
Then apparently it has changed. I didn't have a ROG II, but I have the ROG 5 in hand. I couldn't tell you what has changed, though.
You can, however, opt out of the erase. Not sure if you have to convert the raw to images first, though. I think that would be the method you used in previous phones. It was a flash_all script (or command, if you were on Windows).
Edit: The version from this thread now includes a separate flash_raw and flash_raw_and_wipe command.
twistedumbrella said:
Then apparently it has changed. I didn't have a ROG II, but I actually have my ROG 5. Couldn't tell you what else has changed.
You can, however, opt out of the erase. Not sure if you have to convert the raw to images first, though. I think that would be the method you used in previous phones. It was a flash_all script (or command, if you were on Windows).
Click to expand...
Click to collapse
Ohh .. In that case I was super wrong, and apologies over my misinformation.
Yeah, Actually ROG II Raw files had a Flash-all file which installs the full firmware, and reboots.
I even had a source (A Persian website) to get these when the OTA releases.
I was on windows, and usually after a RAW installation, the cache (Art or Dalvik, Whatever it is we have now) gets cleared and Phone becomes a little bit snappier than it was before.
Guess we gotta stick to ASUS OTA files from the support site then.
Thanks a lot ! : )
These updates come with a flash_raw script that looks more or less harmless. There is no visible wipe command included, but the phone did appear wiped after installing.
The flash_all, on the other hand, has a rather obvious section to opt in or out of an erase that opting out on Linux and Windows. I think the wipe isn't as much a wipe as it overwrites the partition.
I typically install my firmware with fastboot using a slightly modified version of the flash_all script and an unpacked payload. Somehow I broke the installer, which gives me a chance to test the raw again.
Edit: The version from this thread now includes a separate flash_raw and flash_raw_and_wipe command.
JazonX said:
The cache (Art or Dalvik, Whatever it is we have now) gets cleared and Phone becomes a little bit snappier than it was before
Click to expand...
Click to collapse
I thought that rumor died long ago. Usually unless things go wrong clearing the cache should not make your phone faster.
It's like closing all apps/recents after each usage in order to boost the performance.
Anubarak16 said:
I thought that rumor died long ago. Usually unless things go wrong clearing the cache should not make your phone faster.
It's like closing all apps/recents after each usage in order to boost the performance.
Click to expand...
Click to collapse
I think Art broke that. If I remember the explanation, the idea was to create something like the old odex layout that was less sloppy. The code that used to be cached is now broken out into a physical file alongside the application. It's also how apps like *that one everyone remembers for IAP* are able to modify code without breaking signatures.
Successfully rooted using the same commands from here and the root images in the OP.
JazonX said:
Successfully rooted using the same commands from here and the root images in the OP.
Click to expand...
Click to collapse
Any word on the raw firmware? What about the existing boot images?
twistedumbrella said:
Any word on the raw firmware? What about the existing boot images?
Click to expand...
Click to collapse
The RAW firmware I shared earlier - I didn't test it since it's a downgrade.
If the current firmware gets a RAW release, I will definitely test it.
Currently I patched only Boot Slot_A and booted to system using A. (using the same patched image I updated in OP)
Since there is no TWRP, I dont want to manually patch A and B both.
Magisk is stable, Didnt pass SafetyNet - So might need a module for that.
JazonX said:
The RAW firmware I shared earlier - I didn't test it since it's a downgrade.
If the current firmware gets a RAW release, I will definitely test it.
Currently I patched only Boot Slot_A and booted to system using A. (using the same patched image I updated in OP)
Since there is no TWRP, I dont want to manually patch A and B both.
Magisk is stable, Didnt pass SafetyNet - So might need a module for that.
Click to expand...
Click to collapse
You do need a module. It's posted in one of the root threads. I guess we won't know if you need different boot images until someone tests, but at least you seem to be comfortable patching your own.
twistedumbrella said:
You do need a module. It's posted in one of the root threads. I guess we won't know if you need different boot images until someone tests, but at least you seem to be comfortable patching your own.
Click to expand...
Click to collapse
Patching own images are always reliable...
SafetyNet Passed with this fix !
JazonX said:
Patching own images are always reliable...
SafetyNet Passed with this fix !
Click to expand...
Click to collapse
Glad you found it. Good luck.
I flashed the raw firmware. It was a downgrade and my device was already set up and in use, but it included the scripts and commands to install without a wipe (finally). Moving the latest firmware to the sdcard allowed me to update almost immediately after finishing the flash.
I would assume it works on the Ultimate, since everything else has been identical and the date on that package is the same as the software image.
New update !