Related
Hi guys,
so as you are receiving Android 5.0.2 I spoke with my carrier today to find you that they are still waiting for Sony to provide the test software. This means more waiting for me. I'm thinking of updating following this manual - http://techbeasts.com/2015/03/16/update-sony-xperia-z3-compact-d5803-official-android-502-lollipop-231a0690-firmware-how-to/
Before I do it I have a few questions:
1. When I update using this method am I going to lose all the apps and setting that I'm using now?
2. If I choose sets say the german version of 5.0.2, does this mean that in the future I will receive OTA updates alongside the phones running this version out of the box?
Thanks in advace.
shtepsel said:
Hi guys,
so as you are receiving Android 5.0.2 I spoke with my carrier today to find you that they are still waiting for Sony to provide the test software. This means more waiting for me. I'm thinking of updating following this manual - http://techbeasts.com/2015/03/16/update-sony-xperia-z3-compact-d5803-official-android-502-lollipop-231a0690-firmware-how-to/
Before I do it I have a few questions:
1. When I update using this method am I going to lose all the apps and setting that I'm using now?
2. If I choose sets say the german version of 5.0.2, does this mean that in the future I will receive OTA updates alongside the phones running this version out of the box?
Thanks in advace.
Click to expand...
Click to collapse
I would just point out that that thread you linked to states that it is specifically for the Z3c. That is a different device to the Z3
However, you can just flash a FTF for the Z3 found in flashtool (Or the mega collection thread) using flashtool.
You will lose all data on your phone unless you choose to not wipe data.
You will receive updates as if you had the phone with the firmware you install on it.
But you can always flash the FTF for your carrier once it comes out
Greg
Thanks Greg.
So there is a way to avoid wiping the phone when updating with flashtool ?
shtepsel said:
Thanks Greg.
So there is a way to avoid wiping the phone when updating with flashtool ?
Click to expand...
Click to collapse
Untick the box that says wipe data
If you get a load of FCs after the phone boots you will have to re-flash and then wipe data
I think I got it, but I would have to read a bit more before flashing.
Thanks again
Are there any disadvantages to flashing a different version of the firmware?
For example, I'm with Three, and although they now pride themselves on their phones being unlocked, they've still put their bloody splashscreen and other bits and pieces on the provided firmware on the phone! I'd rather have the generic UK version, but just making sure there'd be no issues with that.
None for me, My phone was with ROM for Mtel ( a Bulgarian carrier)that also claims the phone is unlocked. I flashed the central Europe ROM without any issues. Even kept all the files and apps from 4.4.4
Thanks for that, I'll have a look at some of the various firmwares available and make my choice!
Hi there
I am still on build NXT - L29C636B193 with June secuirity patch.
I have the dual SIM L29 4gb gold variant. I am in the UK.
Still waiting for Nougat. From reading around it seems that almost everyone has already recieved the official OTA...
I have also seen people manually flashing the OTA but I am worried I may lose my warranty and make certain apps like Android Pay unavailable.
All advice is appreciated
Thanks:laugh:
If you want to have warranty, stay at stock.
There is a major difference between nougat and mm (in look and performance for me). I dont need my warranty because - 1) ive bought it in china , 2) what does warranty cover? if i crash screen - warranty is worthless, if i crash software - i can fix it by myself - so its useless...
I ve swaped soft for european L29C432B320 from DL-00 and i dont care about OTA or some****.
Just flashed, rooted and using as always. For me root is necessary, so warratny is useless anyway.
The only thing is that if something bricks your phone like e.g. melting in pocket (vide SGS Note7 ) there is nothing you can do...
So - for me - just manually flashed nougat and root it and its ok.
Apad121 said:
Hi there
I am still on build NXT - L29C636B193 with June secuirity patch.
I have the dual SIM L29 4gb gold variant. I am in the UK.
Still waiting for Nougat. From reading around it seems that almost everyone has already recieved the official OTA...
I have also seen people manually flashing the OTA but I am worried I may lose my warranty and make certain apps like Android Pay unavailable.
All advice is appreciated
Thanks:laugh:
Click to expand...
Click to collapse
There is a Upate ,but only rollout in Asia,not for Asia Phones in Europe.
Here is the Update,its a German Site
http://www.android-hilfe.de/thema/huawei-mate-8-nougat-nxt-l29c636b521-full-asien.810037/
I was with NXT-L29C432B192 and on 17.01.2017 receive OTA (B560) update via HiCare.
i have a C636 and converted to C432 and i am on B560 works fine
letschky said:
There is a Upate ,but only rollout in Asia,not for Asia Phones in Europe.
Here is the Update,its a German Site
http://www.android-hilfe.de/thema/huawei-mate-8-nougat-nxt-l29c636b521-full-asien.810037/
Click to expand...
Click to collapse
So can I do this without losing warranty or rooting?
Because I want things like Android Pay to still be intact.
Thanks
ronnie72 said:
I was with NXT-L29C432B192 and on 17.01.2017 receive OTA (B560) update via HiCare.
Click to expand...
Click to collapse
Are you in Europe as well?
Because I want to know if my imported Huawei Mate 8 will receive an official OTA from Huawei...
Thanks
I receive the Ota only to the converted C432.
On original C636 no Ota Updates
Can I load the latest update onto the device so that the system update menu will recognise the update?
Maybe use dload or somrthing?
Can someone point me in the right direction?
Thanks
Apad121 said:
Are you in Europe as well?
Because I want to know if my imported Huawei Mate 8 will receive an official OTA from Huawei...
Thanks
Click to expand...
Click to collapse
Yes, Europe. In HiCare i checked Europe/Germany and recive OTA update.
ronnie72 said:
Yes, Europe. In HiCare i checked Europe/Germany and recive OTA update.
Click to expand...
Click to collapse
Hi there
When I contacted the European chat helper in the Hi care app, they said that my model the NXT - L29 will not get OTA updates while i am not in Southeast Asia?
I don't know if this true as it sounds bizarre, most devices are still updated when not in their home land.
What model number is yours?
Thanks
checksum error
Hi there,
the update appears and it starts to download, but most of the time, I get a checksum error. Only 2 times (out of perhaps 8 downloads) it downloaded properly, so far. The device restarted and got stuck at the "Your device got unlocked and can't be trusted." and "The device is now booting" prompt. I let it rest for more than 3 hours, but nothing happened.
So: none of the categories in the poll apply to me: I seem to get the update, but cannot install it.
mwanner said:
Hi there,
the update appears and it starts to download, but most of the time, I get a checksum error. Only 2 times (out of perhaps 8 downloads) it downloaded properly, so far. The device restarted and got stuck at the "Your device got unlocked and can't be trusted." and "The device is now booting" prompt. I let it rest for more than 3 hours, but nothing happened.
So: none of the categories in the poll apply to me: I seem to get the update, but cannot install it.
Click to expand...
Click to collapse
Are you also on the L29?
Which country are you in?
Did you root or unlock the bootloader?
Apad121 said:
Are you also on the L29?
Which country are you in?
Did you root or unlock the bootloader?
Click to expand...
Click to collapse
I finally figured what was wrong: I had a bad (as in not accepted by the system) update in the dload folder of the sdcard. Thus even after flashing TWRP via adb or the stock firmware upgrade, that was tried and denied, first.
Once I removed that folder, I could successfully install TWRP and the latest CM/Lineage build (alpha-4).
To actually answer your questions: Yes, CH, and yes, bootloader unlocked.
563 arrived for L29C636
Sent from my HUAWEI NXT-L29 using Tapatalk
qwerty1q said:
563 arrived for L29C636
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
Any link to the files ? Instructions ?
Hi there
On the firmware downloader app, a new update has been launched but it is B330? Emui 4.1?
Take a look below
Apad121 said:
Hi there
I am still on build NXT - L29C636B193 with June secuirity patch.
I have the dual SIM L29 4gb gold variant. I am in the UK.
Still waiting for Nougat. From reading around it seems that almost everyone has already recieved the official OTA...
I have also seen people manually flashing the OTA but I am worried I may lose my warranty and make certain apps like Android Pay unavailable.
All advice is appreciated
Thanks:laugh:
Click to expand...
Click to collapse
I had manually uppdated to B521 and tried to update to B563 trough the Firmware Finder without success.
Then I downgraded to B193, tried update to B563 and failed.
Updated to B211 then and did factory reset. After restart I got new firmware showing in system update in settings.
So I´m guessing it´s official OTA update as I didn´t update through Firmware Finder.
Apad121 said:
Hi there
On the firmware downloader app, a new update has been launched but it is B330? Emui 4.1?
Take a look below
Click to expand...
Click to collapse
I was on L29C185B180, and the 321 update (4.1) just hit my phone on Thursday.
I recieved my OTA update today on from NXT L29636211 to b563 im in the UK with China dual sim international Mate 8 purchased from wonda mobile. Went very smoothly. Now enjoying official Nougat.
Hello everybody,
Firstly, apologies about all text, no links.. But i'm new to the site and don't have enough posts to link yet.
So, i'm new to the Mate 9 (had Samsungs for quite a few years now... Overpriced battery sucking hogs that never last to 18 months withou massive issues) and I really haven't gotten into the custon side of/flashing etc since my original galaxy (dunut, before the s!) /HTC Desire, sgs3 days.... So i'm probably quite out of touch... But still capable to learn and especially follow a good guide!
Now, my thing is... I want to stay stock as I use Android pay quite a lot... Yet with my experience with optus they are ATROCIOUS at updates, every with volume sale items like the Galaxy s4, 5 &6 so I can only imagine that i'll never get an update with the mate 9.
I purchased my phone outright, but second hand.... So I don't think I'll have a warranty anyway.
So far I have gathered that I can only debrand if I unlock the bootloader (and pay remains broken even if it gets relocked with an original rom) so for me, at least for the time being, that's out.
My next option is to side load firmware from the SD card... I just want to keep up to date. There is some screen sensitivity issues that the newest firmware apparently addresses.. Not to mention camera updates and battery usage updates (already VERY impressed with the battery though, especially after my S6- Awful phone)
Trouble is, I can't get any update to complete! - They get to 5% and then fail!
The firmware models I've tried have slightly different numbers to what's on my Optus Mate 9... But I can't find any exact matches, so I'm kind of expecting this to be the cause of my failed updates, even when I've downloaded from the different sites following the guides.
Currently i'm running with this;
Model: MHA-L09
Build: MHA-L09C34B122
EMUI: 5.0
Android: 7.0
and I have tried these three updates from the Huawei... Note 2 full and one OTA. Also note the firmware/region differences... But it's as close as I can find.
2017.04.25 MHA L09BC346B181 FULL-MF
2017.04.25 MHA L09BC346B181 OTA-MF
2017.04.24 MHA L09BC34B170 FULL-MF
I've also followed these two guides (and another one with a B170 update), downloading the updates from each respective site in case the firmware was something different than what I could find. Note also that one tells you to put the dload folder into the device memory.. Which won't work, so I just did it in SD which enables the phone to recognise the update file.
(links not allowed sorry, removed and replaced with text, can probably google to see what I did, always fails on step 1)
From get droid tips, upgrade to B170 & B181
from stechguide, upgrade it B181
Not to mention having followed all the guides I could find on this forum.
I'm sorry if I've missed a discussion that already deals with this (or similar) or if it's really bleedingly obvious. I'm just at a bit of a loss here!
Thanks in advance.
Sorry,
This is for Australian firmware. Optus.
Use this: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
I don't get why sites write down guides on how to update, when we in fact can't update using DLOAD. Only 2 offline firmwares have been released so far, for C636 and AL00. But that guide up there will let you update to 181.
Thanks for that,
I'd obviously misunderstood what's available already... Figured since I don't have the 10x zoom available like the latest release, I was behind.
ante0 said:
Use this: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
I don't get why sites write down guides on how to update, when we in fact can't update using DLOAD. Only 2 offline firmwares have been released so far, for C636 and AL00. But that guide up there will let you update to 181.
Click to expand...
Click to collapse
Yes, new users are led the wrong way by reading these guides.
The dload method probably worked with older devices so the Mate 9 articles seem to be created by copy and paste and replacing the older devices name with "Mate 9". Voila! There's your new shiny article about the Mate 9 and people klick it.
Yeah. I got sucked in. Noob mistake.
Sorry for polluting the board with my stupidity!
Very out of touch with behind the scenes android.
Thanks for taking the time guys
Since you don't want to unlock your bootloader you are stuck to only one method. And that is the Firmware Finder method and try to push the latest C34B170 FULL-MF to your System Updater and hope it is authenticated. The other link mentioned by ante0 is for unlocked bootloader users only using TWRP and modified recovery images.
Saw that. Figured I'm just stuck as is for now. I'll check out what you're referring to!
Leighm0 said:
Since you don't want to unlock your bootloader you are stuck to only one method. And that is the Firmware Finder method and try to push the latest C34B170 FULL-MF to your System Updater and hope it is authenticated. The other link mentioned by ante0 is for unlocked bootloader users only using TWRP and modified recovery images.
Click to expand...
Click to collapse
New Mate 9 owner here, have been trying to update from MHA-L29C636B172 to MHA-L29C636B180 using the Firmware Finder method and push to OTA.
System update has picked up the new version but every time I try to download and update, it gets to 100% and then tells me I need to update Package 1 which is the same size, it downloads that, tells me I need to update Package 2, same size, downloads that, Package 3 etc, etc in a never ending loop! I’ve tried using both the smaller update package and the full package. I built up an update file of over 5GB trying to do it this way and it never gets to the authentication stage!
Although I’ve always unlocked my bootloader, flashed custom recoveries and roms on my previous Android devices I’m not keen to take that path yet.
In a nutshell, am I doing something wrong or should I just wait for the official authenticated firmware update to pop up on my phone? Thanks.
Texan1 said:
should I just wait for the official authenticated firmware update to pop up on my phone? Thanks.
Click to expand...
Click to collapse
IMHO yes you should. Don't let FF/FH turn into an obsession, just enjoy your phone.
Sent from my MHA-L29 using XDA Labs
Texan1 said:
New Mate 9 owner here, have been trying to update from MHA-L29C636B172 to MHA-L29C636B180 using the Firmware Finder method and push to OTA.
System update has picked up the new version but every time I try to download and update, it gets to 100% and then tells me I need to update Package 1 which is the same size, it downloads that, tells me I need to update Package 2, same size, downloads that, Package 3 etc, etc in a never ending loop! I’ve tried using both the smaller update package and the full package. I built up an update file of over 5GB trying to do it this way and it never gets to the authentication stage!
Although I’ve always unlocked my bootloader, flashed custom recoveries and roms on my previous Android devices I’m not keen to take that path yet.
In a nutshell, am I doing something wrong or should I just wait for the official authenticated firmware update to pop up on my phone? Thanks.
Click to expand...
Click to collapse
Once you start download.. pause it then go turn off the proxy and then go back to the update and resume. Then you won't get the incremental download loop.
By the way, when you unlock bootloader on mate 9, then flash a full firmware (either the update and rebrand guide, Firmware finder or funky) your bootloader gets locked again. So no real harm done.
Leighm0 said:
Once you start download.. pause it then go turn off the proxy and then go back to the update and resume. Then you won't get the incremental download loop.
Click to expand...
Click to collapse
Thanks @Leighm0, but still getting the 'authentication failed' message once downloaded. Is there anything I can do to prevent that and get the update through?
Texan1 said:
Thanks @Leighm0, but still getting the 'authentication failed' message once downloaded. Is there anything I can do to prevent that and get the update through?
Click to expand...
Click to collapse
Nope, thats Huawei not authenticating the update for your device yet... you just have to wait. Took me about 3-4 weeks from the time of release before B182 got approved for my C636 device.
I just randomly check every week till its finally approved - I try not to keep checking as its pointless and a waste of bandwidth.
Leighm0 said:
Nope, thats Huawei not authenticating the update for your device yet... you just have to wait. Took me about 3-4 weeks from the time of release before B182 got approved for my C636 device.
I just randomly check every week till its finally approved - I try not to keep checking as its pointless and a waste of bandwidth.
Click to expand...
Click to collapse
Thanks @Leighm0. Unsure what the point of Firmware Finder and the proxy is then? If it allows you to find the firmware earlier, but you still can’t install it because Huawei need to authenticate it first, why not just check for updates using the built in system updater?
Good question... Wondering that myself.
Sent from my MHA-L09 using XDA Free mobile app
Texan1 said:
Thanks @Leighm0. Unsure what the point of Firmware Finder and the proxy is then? If it allows you to find the firmware earlier, but you still can’t install it because Huawei need to authenticate it first, why not just check for updates using the built in system updater?
Click to expand...
Click to collapse
Nope - I still had to get FF Proxy to push it to system updater.. just needs to be authenticated by Huawei first. OTA did not show up under the standard "check for updates" options.. it might have shown up, but how long do I need to wait for that ? My device is not available in Australia, would it even get OTA updates if it werent for FF proxy?
Next time a firmware comes out, I could do a test to see if it does even get it by normal methods - and that is to push with FF Proxy, wait for the update to be authorized... then cancel it... turn off FF Proxy and wait for it to show up in my system updater naturally.. see how slow Huawei are at pushing it? Be interesting to see.
The above would probably not be relevant to an Australian sold model/device - it should get OTA updates when they are pushed out..
Leighm0 said:
Nope - I still had to get FF Proxy to push it to system updater.. just needs to be authenticated by Huawei first. OTA did not show up under the standard "check for updates" options.. it might have shown up, but how long do I need to wait for that ? My device is not available in Australia, would it even get OTA updates if it werent for FF proxy?
Next time a firmware comes out, I could do a test to see if it does even get it by normal methods - and that is to push with FF Proxy, wait for the update to be authorized... then cancel it... turn off FF Proxy and wait for it to show up in my system updater naturally.. see how slow Huawei are at pushing it? Be interesting to see.
The above would probably not be relevant to an Australian sold model/device - it should get OTA updates when they are pushed out..
Click to expand...
Click to collapse
Ah, ok, well explained mate. So there is a delay between FF and OTA finding the update and then there is a delay as to when Huawei decide to authenticate it.
Are firmware and when Huawei decide to authenticate based on model number? Geographic regions? Mobile carrier?
Mine was purchased via Hong Kong and is the MHA-L29C636 model which I believe is the version JB HiFi sell as well.
Texan1 said:
Ah, ok, well explained mate. So there is a delay between FF and OTA finding the update and then there is a delay as to when Huawei decide to authenticate it.
Are firmware and when Huawei decide to authenticate based on model number? Geographic regions? Mobile carrier?
Mine was purchased via Hong Kong and is the MHA-L29C636 model which I believe is the version JB HiFi sell as well.
Click to expand...
Click to collapse
Not sure how Huawei do their authentication approvals.. but it's not model number.. as someone with same model as mine got theirs authenticated 3-4 weeks before mine did (they were in different country). Could be region and or mobile carrier.. who knows.
Mine was purchased from Thailand and is the LON-L29C636 but is not sold anywhere here in Australia. Correct your model is indeed sold by JB Hi-fi.. so would think you get yours approved same time as those who bought here in AU from JB. But again this could be wrong and they could base authentication on something else... Maybe serial number groupings or who knows?!?!
Leighm0 said:
Not sure how Huawei do their authentication approvals.. but it's not model number.. as someone with same model as mine got theirs authenticated 3-4 weeks before mine did (they were in different country). Could be region and or mobile carrier.. who knows.
Mine was purchased from Thailand and is the LON-L29C636 but is not sold anywhere here in Australia. Correct your model is indeed sold by JB Hi-fi.. so would think you get yours approved same time as those who bought here in AU from JB. But again this could be wrong and they could base authentication on something else... Maybe serial number groupings or who knows?!?!
Click to expand...
Click to collapse
Iirc they go by IMEI.
Hi,
I live in Egypt and the Honor View10 is NOT officially sold here so I bought it from the hihonor UK website. I noticed that I never receive OTA updates despite trying to check for updates from time to time. When I wait for too long for OTA and it never comes, I use Firmware Finder which is NOT working nowadays for some reason & honestly I'm not a big fan of it since my phone is a flagship and relatively new so why not getting OTA updates directly from Honor?!
Chatting with Customer Service today revealed a schocking thing. I was told that I should be using the phone in Europe with an European SIM to get updates since my phone is not supported in my region!!! I told him that my phone is the international version and it was unlocked (sim free) so how come I won't be getting updates just because I'm not living in Europe?!! all he said is that he'll forward my complaint to the dev team to investigate but no promises
But is this really the case with all other brands or it's just Honor/Huawei?!
I'm here not to knock any brand down but paying around GBP 450 for a phone that will torture me just to get OTA updates is a thing that I regret now very much - especially that they have all their attention nowadays on their newer phone (the Honor 10), which is pretty much identical to the Honor View 10 but with a notch! and my phone seems like it was forgotten very quickly!.
If this issue is not resolved, I'll drop Honor/Huawei brand entirely from any future considerations! a hard move on my part because of their excellent hardware but I can't pay at least ~ USD 500 for a phone without having OTA pushed to me wherever I am in the world!!!
magoooood said:
Hi,
I live in Egypt and the Honor View10 is NOT officially sold here so I bought it from the hihonor UK website. I noticed that I never receive OTA updates despite trying to check for updates from time to time. When I wait for too long for OTA and it never comes, I use Firmware Finder which is NOT working nowadays for some reason & honestly I'm not a big fan of it since my phone is a flagship and relatively new so why not getting OTA updates directly from Honor?!
Chatting with Customer Service today revealed a schocking thing. I was told that I should be using the phone in Europe with an European SIM to get updates since my phone is not supported in my region!!! I told him that my phone is the international version and it was unlocked (sim free) so how come I won't be getting updates just because I'm not living in Europe?!! all he said that is he'll forward my complaint to the dev team to investigate but no promises
But is this really the case with all other brands or it's just Honor/Huawei?!
I'm here not to knock any brand down but paying around GBP 450 for a phone that will torture me just to get OTA updates is a thing that I regret now very much - especially that they have all their attention nowadays on their newer phone (the Honor 10), which is pretty much identical to the Honor View 10 but with a notch! and my phone seems like it was forgotten very quickly!.
If this issue is not resolved, I'll drop Honor/Huawei brand entirely from any future considerations! a hard move on my part because of their excellent hardware but I can't pay at least ~ USD 500 for a phone without having OTA pushed to me wherever I am in the world!!!
Click to expand...
Click to collapse
Well first of all this is bull**** that you need European sim to get updates
Kindly mention the version you are currently on.. Just to notify you, updates are quite slow on view 10 so it's like 1 update in about 2 months
There are ways you can debrand your phone and change it to US, Indian or China version as well getting updates shouldn't be a problem, at best use Vpn to overcome any geographic restrictions
(--light--) said:
Well first of all this is bull**** that you need European sim to get updates
Kindly mention the version you are currently on.. Just to notify you, updates are quite slow on view 10 so it's like 1 update in about 2 months
There are ways you can debrand your phone and change it to US, Indian or China version as well getting updates shouldn't be a problem, at best use Vpn to overcome any geographic restrictions
Click to expand...
Click to collapse
Thanks for your answer. I'm quite sure their customer service wasn't right and my sim has nothing to do with updates as I bought it sim free in the first place. I was wondering if there's any way to convert my phone from European to US and install their Oreo 8.1 ROM with the EMUI 8.1? I obtained an unlock code from their website but I kept it aside as I'm not planning to use custom ROMs untill official suppport stops completely.
I'm currently on the BKL-L09 8.0.0.160(C432) - bootloader is locked and no root or any modification has been applied to my phone.
Android Security Patch: May 5, 2018
I know that there's the B162 update which has EIS + June security patch + some fixes for sound...etc
and there's also the B163 update with has July security patch.
I'm not interested to install VPN's for daily use as I'm not super worrying about privacy, but I installed and tried several free VPNs and configured them to any European country, but checking for updates gave nothing up till this moment I'm writing this. I'm really pissed off!
magoooood said:
Thanks for your answer. I'm quite sure their customer service wasn't right and my sim has nothing to do with updates as I bought it sim free in the first place. I was wondering if there's any way to convert my phone from European to US and install their Oreo 8.1 ROM with the EMUI 8.1? I obtained an unlock code from their website but I kept it aside as I'm not planning to use custom ROMs untill official suppport stops completely.
I'm currently on the BKL-L09 8.0.0.160(C432) - bootloader is locked and no root or any modification has been applied to my phone.
Android Security Patch: May 5, 2018
I know that there's the B162 update which has EIS + June security patch + some fixes for sound...etc
and there's also the B163 update with has July security patch.
I'm not interested to install VPN's for daily use as I'm not super worrying about privacy, but I installed and tried several free VPNs and configured them to any European country, but checking for updates gave nothing up till this moment I'm writing this. I'm really pissed off!
Click to expand...
Click to collapse
Well yes 163 is available for your device, u can always use firmware finder for update, lucky for you full ROM is present on firmware finder, not just incremental updates, u can use this
If u get any problem installing this just search for "dload" method and it will update just fine
magoooood said:
Thanks for your answer. I'm quite sure their customer service wasn't right and my sim has nothing to do with updates as I bought it sim free in the first place. I was wondering if there's any way to convert my phone from European to US and install their Oreo 8.1 ROM with the EMUI 8.1? I obtained an unlock code from their website but I kept it aside as I'm not planning to use custom ROMs untill official suppport stops completely.
I'm currently on the BKL-L09 8.0.0.160(C432) - bootloader is locked and no root or any modification has been applied to my phone.
Android Security Patch: May 5, 2018
I know that there's the B162 update which has EIS + June security patch + some fixes for sound...etc
and there's also the B163 update with has July security patch.
I'm not interested to install VPN's for daily use as I'm not super worrying about privacy, but I installed and tried several free VPNs and configured them to any European country, but checking for updates gave nothing up till this moment I'm writing this. I'm really pissed off!
Click to expand...
Click to collapse
Not everybody I know in Spain has 162 update, the OTA are rolling out in batches, perhaps with a VPN you could get the OTA in a easier way, but wait for a few days to check if OTA is available
(--light--) said:
Well yes 163 is available for your device, u can always use firmware finder for update, lucky for you full ROM is present on firmware finder, not just incremental updates, u can use this
If u get any problem installing this just search for "dload" method and it will update just fine
Click to expand...
Click to collapse
I found many people bricked their device because this method has high chances of failure.
Sent from my BKL-L09 using Tapatalk
Santi_SAZ said:
Not everybody I know in Spain has 162 update, the OTA are rolling out in batches, perhaps with a VPN you could get the OTA in a easier way, but wait for a few days to check if OTA is available
Click to expand...
Click to collapse
I will wait for the end of July and hopefully I hear something about an update showing up in Europe but I'm still very pissed off because this model has been very quickly ignored in favour of the subsequent notched model!! I have never ever seen a company release pretty much identical hardware consecutively!! [emoji80]
Sent from my BKL-L09 using Tapatalk
I used the dload method on my c675 to update from b130 to b151.. Then used the system update to go to b161
As long as the dload contains the exact ROM for your phone it will work.
Other than that use system update.
HFF is useless to my phone.. Always rejects the update from them.
br54 said:
I used the dload method on my c675 to update from b130 to b151.. Then used the system update to go to b161
As long as the dload contains the exact ROM for your phone it will work.
Other than that use system update.
HFF is useless to my phone.. Always rejects the update from them.
Click to expand...
Click to collapse
I am confused myself because for each firmware version, there is ota and fullota and for each of these, there are three files and I'm not sure which one is the actual update. For example if I ignore the B163 for now because it's not approved yet, the B162 OTA for example has three files in it and I am not sure what to do with them. For example, some people say to unzip the update.zip file inside a dload folder and some people say just keep it zipped and put it on the root of internal storage so I'm confused a lot.
Sent from my BKL-L09 using Tapatalk
magoooood said:
I am confused myself because for each firmware version, there is ota and fullota and for each of these, there are three files and I'm not sure which one is the actual update. For example if I ignore the B163 for now because it's not approved yet, the B162 OTA for example has three files in it and I am not sure what to do with them. For example, some people say to unzip the update.zip file inside a dload folder and some people say just keep it zipped and put it on the root of internal storage so I'm confused a lot.
Click to expand...
Click to collapse
In the dload method you must use all 3.. But for your model
I give up on HFF... It's useless now other than downloading full ota maybe.
Let me find the link explaining the dload method... Except change the c675 to your number... On the dload method you will have a fresh device wiped off all your data.
Imho I'd wait till you get it through system... The b161 installed perfect.
I don't think HFF is official and is having problems...I deleted it as none of the files seem to work and always gets rejected.
I'll link to the form that had a detailed dload method I used and was successful with the b151.
For dload always use full ota.. With system update you can use partial.
---------- Post added at 10:46 PM ---------- Previous post was at 10:41 PM ----------
If you want to try to force an update
Find the rom you want to upgrade to
Download the full ota.... And follow this guide
https://forum.xda-developers.com/ho...return-to-stock-flashing-custom-roms-t3809905
magoooood said:
I will wait for the end of July and hopefully I hear something about an update showing up in Europe but I'm still very pissed off because this model has been very quickly ignored in favour of the subsequent notched model!! I have never ever seen a company release pretty much identical hardware consecutively!! [emoji80]
Click to expand...
Click to collapse
We have an update every month, perhaps aren't the update you are waiting. In September, we will receive GPU turbo update.
If you don't want unlock the bootloader the only thing you can do is wait, if you don't care about your bootloader, unlock it and look for few ways to flash an update
I'm not a honor fanboy
you Need European SIM to get official updates
Babu mani said:
you Need European SIM to get official updates
Click to expand...
Click to collapse
That's totally ridiculous because i bought my phone Sim free and unlocked. Updates should come to me anywhere in the world as long as I'm connected!! [emoji80][emoji80][emoji80]
Sent from my BKL-L09 using Tapatalk
understand
But Huawei updates are based on regions
Only solution is manual flashing
I'm in America with a Indian phone with a American sim.... And I got c675 Indian region update in America..
Just be patient..... You'll get it.
I imported my phone from the UK and using it in Egypt which doesn't have this phone sold officially. I have complained again to the customer service today that I'm not receiving OTA updates and he insisted that I won't be having updates because I'm not using a UK sim and that's their policy so I am seeing now a contradiction between what you're saying and what I was told by the customer service!
Sent from my BKL-L09 using Tapatalk
br54 said:
I'm in America with a Indian phone with a American sim.... And I got c675 Indian region update in America..
Just be patient..... You'll get it.
Click to expand...
Click to collapse
agreed. we get updates. sometimes SIM is needed but sometime doesnt. I got bunch of updates on my 6X from China with Indian SIM. anyways, user can dload the full firmware for updating it manually.
Hello seems like my parents are having the same issue. The phones are bought from China and are BKL-AL20.
But looking in about phone it states
Modell: BKL-L09
Version: BKL-L09 8.0.0.110 (C432)
So they seem to be running on very old version. I'm pretty sure that they got OTA updates the first time they opened the phone. When I now try to update the phone says that there are no updates. C432 is Europe and my parents are in Sweden and hence using a Swedish sim-cards.
Is there anyway to get the phones updated, preferably without loosing any data or the hassle of unlocking bootloader and rooting the phones?
Edit: I tried phone updater, HiSuite updater and HiCare updater.
Leo_83 said:
Hello seems like my parents are having the same issue. The phones are bought from China and are BKL-AL20.
But looking in about phone it states
Modell: BKL-L09
Version: BKL-L09 8.0.0.110 (C432)
So they seem to be running on very old version. I'm pretty sure that they got OTA updates the first time they opened the phone. When I now try to update the phone says that there are no updates. C432 is Europe and my parents are in Sweden and hence using a Swedish sim-cards.
Is there anyway to get the phones updated, preferably without loosing any data or the hassle of unlocking bootloader and rooting the phones?
Edit: I tried phone updater, HiSuite updater and HiCare updater.
Click to expand...
Click to collapse
You can use dload. Download the firmware foem firmware finder and update.
shashank1320 said:
You can use dload. Download the firmware foem firmware finder and update.
Click to expand...
Click to collapse
Won't that wipe data?
Hi all, I have downgraded my p40 pro to 131 to get google apps working. Then tried auto updates and it tells me that there is an update but same version 131, updated to 131 using auto update but it still keeps telling me that I'm on 131 and same version of update available. Connected to PC and use Hisuite and same story, tells me 131 update available (which I already have) and nothing else. Was able to update to 154 using proxy but now same story, it keeps telling me that 154 update available which I did auto update but I still get notification that I there is new update to 154. I cleared data and cache both for Huawei Core and Update app but still same story.
Please help!?!
You will need to use Hisuit Proxi & firmware finder to get more upto date firmware.
cmoss9946 said:
You will need to use Hisuit Proxi & firmware finder to get more upto date firmware.
Click to expand...
Click to collapse
hi, should I update it using FullOTA-MF or OTA-MF only? thanks
Select Full, and use the check availability option to make sure its an approved for install as well, else it will fail.
cmoss9946 said:
Select Full, and use the check availability option to make sure its an approved for install as well, else it will fail.
Click to expand...
Click to collapse
thanks, another question is, will it wipe off the phone?
When I did mine, No. But remove or backup any personal stuff off your memory card if you have one, just in case. Note if you've done the GMS install, make sure you log into All you're accounts, ie YouTube etc first before upgrading firmware. Cause you won't be able to add later.
cmoss9946 said:
Select Full, and use the check availability option to make sure its an approved for install as well, else it will fail.
Click to expand...
Click to collapse
Update: Ok found it, it is via the advance button and paste the link there to check if it's approved or not.
Is this done via the HiSuit Proxy Advance button? how can i check if it's approved or not?
Use firmware finder to check it's an approved version.
Hi im having the same problem. I tried to manually update to version 10.1.0.161 after installing gms from 121. Still cant get OTA. Its been 2 weeks.
iwan_chong said:
Hi im having the same problem. I tried to manually update to version 10.1.0.161 after installing gms from 121. Still cant get OTA. Its been 2 weeks.
Click to expand...
Click to collapse
Hi maybe it will help you
https://www.youtube.com/watch?v=Dc-trmzWsxo
samlis said:
Hi maybe it will help you
https://www.youtube.com/watch?v=Dc-trmzWsxo
Click to expand...
Click to collapse
Thanks! I manage to get update to .172 but I checked with my other friends also p40 pro to be on .182. Any idea why?
iwan_chong said:
Thanks! I manage to get update to .172 but I checked with my other friends also p40 pro to be on .182. Any idea why?
Click to expand...
Click to collapse
Hi, Maybe different region or you don't have the same cust software version (C432 or c605 or C185)
samlis said:
Hi maybe it will help you
https://www.youtube.com/watch?v=Dc-trmzWsxo
Click to expand...
Click to collapse
Hmmm we are all on C636. No idea what went wrong. Only difference is 4RP1 and 5RP1. Any difference in those?
Same situation here, I downgrade to version 131 o install GSM and now the phone won't update.
I had to update it using HiSuite and now I'm on 183 version.
Hope there is a way to fix the OTA updates on the phone.
getting regular updates after installing GMS via googlefier
Doing some research I have found what is happening:
On your P40 Pro, in the "About phone" screen you can see the build number and then a number between ( ), example: Build number 10.1.0.131 (C636E8R5P1)
The number after the C will tell you the version or region of your firmware, in the example C636 = version/region 636
When you downgrade using a different version/region you will loose the OTA updates on the phone, and this will only be restored after you install your correct version/region firmware.
You will need to find the correct version of your firmware and have the "dload" version, and install it from external card. There is a video showing how to do this, but the link on the video is for a version/region 636, if you have a different version/region it won't fix anything.
Once you have the correct firmware and install it, you will begin receiving OTA again. This process, at least on my phone, erased everything, so be aware of this.
williegomezt said:
Doing some research I have found what is happening:
On your P40 Pro, in the "About phone" screen you can see the build number and then a number between ( ), example: Build number 10.1.0.131 (C636E8R5P1)
The number after the C will tell you the version or region of your firmware, in the example C636 = version/region 636
When you downgrade using a different version/region you will loose the OTA updates on the phone, and this will only be restored after you install your correct version/region firmware.
You will need to find the correct version of your firmware and have the "dload" version, and install it from external card. There is a video showing how to do this, but the link on the video is for a version/region 636, if you have a different version/region it won't fix anything.
Once you have the correct firmware and install it, you will begin receiving OTA again. This process, at least on my phone, erased everything, so be aware of this.
Click to expand...
Click to collapse
If c636 is version/region then what e8r5p1 is?
any ideas on how to update to the latest version manually without losing data? when i check for update it says im on latest, but im on .121!
My version is .176 c432 want to install gms so I still need to downgrade to .131 first? Also I saw most people are c636 what region is mine?
iwan_chong said:
Hmmm we are all on C636. No idea what went wrong. Only difference is 4RP1 and 5RP1. Any difference in those?
Click to expand...
Click to collapse
Same thing for me. Im afraid I'll lose my update ability forever lol