Good Day every one
I really need your urgent help
I have a chinese Mate7 Gold dual SIM that I upgraded it till I reached MT7-TL10C00B357 using OTA
I have unlocked the bootloader and rooted the phone and installed TWRP 2.7.8.0 for lolipop
then I tried to install a middle east update.app by extract the file and make flashable Zip using huawei extractor
after this trial the Phone went to rescue Mode with no access to TWRP Recovery
I have tried the following with No Use
1-Install huawei suite 4 and trying system recovry ...it install the recovery and when installing the system it fails and after that the phone goes back to rescue mode with no access to rcovery
2- I extracted the Cust, Recovery, System, Boot and userdata from the Stock Rom MT7-TL10C00B357 and I flashed them using fast boot flash after putting the phone in fastboot rscue mode... the flash was OK but after the five files were flashed and trying to reboot, the phone goes back to rescue mode
3- trying the same as step 2 and trying to flash the update.app using three buttons flash... the phone stuck at Huawei Ascened Logo and nothing happens
4- trying another Update.app of Android 4.4 and extracting cust,recovery,boot, system and userdata and flash them using fast boot.. flash is ok but rescue mode is still presist
5- I have tried several times to flash TWRP again .. the flash is ok but no access to TWRP only Rescue mode or fastboot rescue mode
6- I tried to change to oeminfo and custom.bin to be eu using Huawei SRK tool 1.8 but I failed
when trying to adb devices the result is empty
I heared from one psot that this might be a problem in the sensor although I dont see a direct relation
so any one could figure out a solution to this problem
I guess I have all the tools necessary but cant find a working solution
Please help me urgently
Sherif Nassif said:
Good Day every one
I really need your urgent help
I have a chinese Mate7 Gold dual SIM that I upgraded it till I reached MT7-TL10C00B357 using OTA
I have unlocked the bootloader and rooted the phone and installed TWRP 2.7.8.0 for lolipop
then I tried to install a middle east update.app by extract the file and make flashable Zip using huawei extractor
after this trial the Phone went to rescue Mode with no access to TWRP Recovery
I have tried the following with No Use
1-Install huawei suite 4 and trying system recovry ...it install the recovery and when installing the system it fails and after that the phone goes back to rescue mode with no access to rcovery
2- I extracted the Cust, Recovery, System, Boot and userdata from the Stock Rom MT7-TL10C00B357 and I flashed them using fast boot flash after putting the phone in fastboot rscue mode... the flash was OK but after the five files were flashed and trying to reboot, the phone goes back to rescue mode
3- trying the same as step 2 and trying to flash the update.app using three buttons flash... the phone stuck at Huawei Ascened Logo and nothing happens
4- trying another Update.app of Android 4.4 and extracting cust,recovery,boot, system and userdata and flash them using fast boot.. flash is ok but rescue mode is still presist
5- I have tried several times to flash TWRP again .. the flash is ok but no access to TWRP only Rescue mode or fastboot rescue mode
6- I tried to change to oeminfo and custom.bin to be eu using Huawei SRK tool 1.8 but I failed
when trying to adb devices the result is empty
I heared from one psot that this might be a problem in the sensor although I dont see a direct relation
so any one could figure out a solution to this problem
I guess I have all the tools necessary but cant find a working solution
Please help me urgently
Click to expand...
Click to collapse
I had tried all the methods in the globe to flash the 4 files cust,recovery,system..etc and nothing happened
till I got this program from another thread the program called DC Pheonix
the advantage of this program is that you can flash all the image files of any update.app while if you try to flash for example sensorhub.img using fastboot , you will get a message that command not allowed
so install the program and buy a 15 Euoro credit and flash the original last ROM that was on the phone
I could not wait till the morning I downloaded Phoenix DC and bought 15 credits = 15 Euoros and flashed the original update.app which was the chinese version MT7-TL10C00B357
The phone is working well nowwwwwwwwwwwwwwww Yupeeeeeeeeeeeeeeeeeeeee
I am so Happy
Happened to me before, sounds wierd but actually , I thought it's a hard problrm to solve and that actually made me solve it after working for 8 hours and the solution simply was reboot in fastboot and rescue mode will be Rescue&fastboot mode , then flash
Sent from my JAZZ using Tapatalk
hy to all
i need a help from you guys
i have huawei y336-u02 the problem is i rooted this device and mistakly fashed recovery with unknown recover.img and after that i found i have no any option for go to recovery mode after my friend give me two file recover.img and boot.img from huawei official firmware and flash it again from flasify but now the biggest problem is arrised that is now even i cant open my device when i try to open it ony stock at huawei logo.
I also tried to flash it from researchdownload and upgrade download from official firmware of huawei y336 but their is another problem arrised that is : failed : the second enumeration port time out even i try different laptop and cables and usb port but cant get help from those option
please help me to open my device again
thank you
The SP Flash Tool is not detecting or starting the download on my Huawei Ascend G700 and also the recovery is not working. What should I do to install the stock ROM.
My phone is in bootloop , only showing huawei symbol when starting and also recovery mode is missing,so that I can't able to flash using micro sd card.
vishnuv26 said:
The SP Flash Tool is not detecting or starting the download on my Huawei Ascend G700 and also the recovery is not working. What should I do to install the stock ROM.
My phone is in bootloop , only showing huawei symbol when starting and also recovery mode is missing,so that I can't able to flash using micro sd card.
Click to expand...
Click to collapse
Greetings and welcome to assist. Have you tried using just fastboot ? I did find this thread that has some tools that may help
https://forum.xda-developers.com/showthread.php?t=2412017
Good Luck
Sawdoctor
hi
honor 3c h30 u10 on kitkat official b320 went wrong as before and i tried to flash it again with its UPDATE.app file which contains 4.4 kitkat official ROM. TWRP couldnt do it because it needed stock recovery. i installed stock recovery several times with sp flash tools and green cirlce came up but no stock recovery came up and still TWRP. i used a trick and add a text file "au_temp.cfg" to the "dload" folder which contains UPDATE.app file to force the process. i powered on the phone and automatically stock recovery came up and process began. everything went OK and successful. i restarted it and it stucked in bootloop which was popular. BUT ... here came the problem. when i tried to unbrick it "sp flash tool" didnt download any files to my phone. it stuck at 0%. it did work a while before but didnt as before ... i used all kinds of mediatek preloader vcom drivers but nothing changed. when i click download and connect the non-battery phone it appears on device manager as Mdiatek preloader....... and after 2 sec or 3 sec it disppears and sp flash tool stuck at 0% . i tried differnt ports, cables, PCs, and SPtool versions and event differrent recovery files but nothing changes. PLzzzzzzzz Help me ...
I flash many custom roms on Huawei y360-u61, now sp flash tool can't format the current flash.
SpFT shows formating and flashing process is done, but the phone opens as nothing has installed