Database Info

[ROM]InfoTM X220 (Flytouch II, WOWpad, SuperPAD)

It is the latest release for SuperPad as well as FLYTOUCH2 and contained the GMS(vending, gmail, gtalk, etc..).
1. prepare:
Please download the burn tools(for windows):
www .megaupload.com/?d=QCPV7V9D
the latest images:
dl.dbank.com/c0px0ishux
that contained fives images: system.img, userdata.img, uImage, ramdisk.img and recovery_rd.img
2. burn new rom:
(1)Open the flash tools
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(2)unzip the download images files. Press "Setting" button and choose the files.
(3)Connect SuperPAD with PC via USB cable, using the first usb socket of the PAD, and press MENU + POWER to bring up PAD to Flash mode. You will see the first device status block become to GREEN.
(4)Press "Start" menu to begin flash ROM.
(5)Burn successfully
3. press "reset" to reboot.

Anyone tried this?

is this custom rom or official?

strazicic said:
is this custom rom or official?
Click to expand...
Click to collapse
It's the official ROM

Ok, thanks,
so it is the last update - I allredy have it on the pad, works good.

What verison is this ?
1001?
1170?
Does wifi work?

it is 1170
Sent from my deb using XDA App

Can I use the same for WOWPAD? Also if anything goes wrong Can I get back to previous factory setting?
Model # dory
FW Version 2.1-update1
Kernel Ver # 2.6.32.9 [email protected] #1
Build # dory-r2.1.925

I just ran this on my wowpad that was stuck at the green wowpad screen. Now it is getting to a calibration option and resetting over and over. I guess that is progress. Is there a different version of the update around for the wowpad? I have another pad that works, is there any way to pull an image from the working device?

Just updated my wowpad to 1170 with full update (using burntool). Everything seems very fast. Top wifi switch now works. Wifi connected without any trouble. Could not browse through ADSL (Ethernet) lan connection. It is showing connected but no browsing. It worked with previous .925 version. Try it tomorrow. Still asking for the license number. Can anyone help me with a license number. I probably threw it away with the box.
[email protected]

My email: [email protected]

I tried it on my other wowpad and it is working fine. It does seem faster and wifi is working like before, I haven't tried much else yet. My second pad froze while playing angry birds and after reboot kept getting stuck on the green screen also so I was forced to try to reflash it. I guess my first one has some hardware problem.

My inglish is very bad ....
Please can you send burntools - v07.5? I don´t search in internet. Anysearch bruntool v07.2.
My tablet is off. My email is [email protected]
Thanks If you don´t send burntools please Link download

Hi singingdrop, any chance in telling me where you found the v07.5 burntool, looked everywhere but no luck, cheers

megaupload.com/?d=QCPV7V9D
you could get the burntools 7.5v from the upper location.

You can have very good instruction and process to upgrade from this "Spanish" site. Just translate it to english. Just add http// @ the beganing. I'm not yet allowed to post link. Delete space after http.
http : / / movileschinos.com/zona-de-charla/tablets-pc/7140-pad-infotm-x220-flytouch-ii-wowpad-superpad-actualizaciones-trucos-apps-etc.html

Upgrade for WOWPad?
Greetings:
I just purchased and received two "wowpads" via DHGATE.com seller and am pleased for the most part with the hardware.
I use OruxMaps to view maps relative to the current position. My goal is to use it in an airplane for background reference against the aeronautical charts that have been scanned and can be cached on the SDCard by using a program Mobile Atlas Creator from live map services for a region of interest.
My only concerns are with the brightness - it is difficult to use with much sunlight and also the lack of ability to turn on and off the GPS receiver. Certain apps will turn it on, and it slowly does find the satellites for positioning - up to 15 mins to triangulate. Then although I can shutdown the calling app for the mapping, it does not turn off the GPS. I tried a widget from the Market to
control the GPS, but it does not respond.
Does anyone know whether the ROM upgrade will fix the GPS on/off control?
Is there an official 2.2 ROM coming?
Doug.

Just updated this way on a flytouch2, it's a bit faster now and wifi works also.
I've updated from version 925 in wich my license code (I had to ask for at the place I bought my device) wasn't accepted. But when I tried to register after this update and filled in my license code everything worked great????????? even my license code was accepted
THNX for all the work you guys do

official?
Drazix said:
It's the official ROM
Click to expand...
Click to collapse
How do you know it is the official?
It seems to differ markedly from my original factory setup (but not necessarily in a bad way...). If we don't know where this came from, is it safe to install from?
btw, it seems to work great

QUESTION:
Some friends reported AFTER FLASH:
MARKET BROKEN
ETHERNET PORT DOESNT WORK
Anyone ?????

Apple CarPlay Dongle - Autoplay - Not working correctly

Hello all!
I have bought the Apple Carplay Dongle with the app called AutoPlay. (https://www.amazon.de/gp/product/B076D2BP4S) The App and the dongle have the newest version.
The problem is that the head unit will start completely new or the connection get lost to the device. I tried several devices (iPhone 5S, iPhone 6S Plus, iPhone 7 Plus, iPhone X) - I also changed the lightning cable.
The usb from my device is working. Maybe I do something wrong?
I used a XTRONS, Android 8, Octa-Core, 4GB RAM, 32GB ROM device.
Some suggestions would be great.

Just curious, what did the reseller suggest?

marchnz said:
Just curious, what did the reseller suggest?
Click to expand...
Click to collapse
They told me that everything worked fine at their devices. I bought it at a german reseller. Is it possible to get in touch with the creator?
I attached a photo of my versions. Maybe you have some ideas?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Have you tried using a powered USB hub? These Carplay dongles often need more than 500mA

Does anyone know the Autoplay Android app developer? We need some help for mapping one bmw button that does not work on Android 7.1

mnikitas said:
Does anyone know the Autoplay Android app developer? We need some help for mapping one bmw button that does not work on Android 7.1
Click to expand...
Click to collapse
The original adaptor appears to be made by Carlinke. They have a website of the same name - you should start there (sorry, I can't post external links yet).

I had to buy a USB splitter to get my CarPlay dongle to work reliably. A single USB port just wasn’t enough.

Now in the cold time of the year I have a problem with the dongle. The dongle is not connect over the usb to the android device. The app says that I have to connect the box. Is this normal? - After some time of driving it is working.

Now it is the problem that I have to restart my device to get the box recognized by the app. Did someone have some suggestions?

yfain said:
They told me that everything worked fine at their devices. I bought it at a german reseller. Is it possible to get in touch with the creator?
I attached a photo of my versions. Maybe you have some ideas?
Click to expand...
Click to collapse
looks like you have the carlinkit dongle like mine, you may need to update firmware on box. I got the latest box firmware from alliexpress selleer ( as per time of this post )
install instuctions
1) format a USB drive as FAT32
2) place img file in root of USB
3) plug dongle into andorid unit ( do not put in USB yet )
4) open app
5) once app asks you to connect phone, plug in USB drive into dongle.
6) you will get message on app saying box updating.
7 ) finally check setting menu in APP to see box and software up to date ( you will need to be connected to WIFI for this I belive)

Thanks for your post.
Is it right that the latest version of app and dongle is from the end of december 2018?

I have the same box on a px5 android 6 and it keeps restarting/disconnecting when I use a navigation app like google maps. I tried using 2 usb ports for extra charge, different phone, cable, etc.
nothing works

Yes, for me it is the same.
I think there is also no update available since 4 months. I do not know why.

usb splitter
mitchello said:
I had to buy a USB splitter to get my CarPlay dongle to work reliably. A single USB port just wasn’t enough.
Click to expand...
Click to collapse
hey, so following the forum I found your post about the y splitter I purchased the splitter online my question now is what do I hook up on the female side and what exactly on the male sides?? also what if my android screen has only one USB output??

Spent close to 100 hours looking for drivers for H950. Need Help!

Hello everyone,
I bought this phone on sale last year and it was advertised as follows...
Refurbished: LG G Flex2 H950 32GB Unlocked GSM 4G LTE Octa-Core Android Phone
In browsing the forums here I see the excitement around this phone has waned quite a bit since it's release, but I'm hoping there's still a few of you left who might be able to help me. I totally love this phone and want to be able to use its full potential.
It's branded as an AT&T phone when the boot-up screen appears. I doubt it was sold as unlocked by AT&T, but rather Newegg, or someone they're reselling for, unlocked it. I've never been an AT&T customer. I bought it knowing I could use any carrier willing to sell me a sim card. I'm currently using Mint.
It came with the 5.01 firmware. I've spent many days reading every thread I can about how to upgrade it, and possibly get Marshmellow as well. The issue is that I can't seem to find any drivers that function properly. Here are all the ones I've tried...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The only one that's come close to fully functional is the top one for version 3.11.3.0 It's the only one that recognizes all of the sub-devices no matter how many times I unplug the USB cable and plug it back in. The only other one that came close was version 4.2.0
I use a program called USBDeview, which provides live monitoring of USB connections and shows a great deal of info about each one. In the images I'm going to share, I've shrunk away all of the columns except the ones I think are most relevant. The ones with Green dots mean it sees them as a working, connected device. The ones with Gray dots mean that there is a record of this device connecting, but that it does not see them as currently connected. And the Purple dots mean it sees the device as connected, but that there is some issue with its functionality.
Here's the result when I use the 3.11.3.0 driver...
All 5 devices show green and everything action I've tried to perform from studying guides here works perfectly. And, as I said, it keeps working no matter how often I reconnect it. The only weird thing is that USBDeview reports the version as 3.11.0.0, even as the filename and the file properties report it as 3.11.3.0 It reports correctly for all the other drivers I've tried, but I guess it's nothing to complain about at this point.
The problem is that whenever I put the phone in “Firmware Update/Download Mode” I get this result...
The LGE Mobile Sooner Single ADB Interface driver now shows as disconnected, and as such, I can't send any ADB commands and my device doesn't show up on the list when I type "ADB Devices". It doesn't indicate there is a problem, it just shows it as not there. This issue is thwarting all my efforts to upgrade the phone.
With the 4.2.0.0 driver, I get a similar, but slightly different result. Sometimes I got this when connecting the phone in normal mode...
And other times I got this...
I can't account for the different results because I was trying all kinds of tweaks and fixes between different attempts. But one thing was universal with this version: They would all show green for up to a minute or so and then all but one would start disconnecting until it looked something like this...
The other drivers I tried were similar. Some recognized more devices, some less, and some would look like the above on their first use. Some were consistent and some would look okay for a minute and then disconnect.
When it came to Download Mode, some would see the ADB driver and some would see the USB driver, but I still haven't found one that will see both. When I check the error logs, I most often see something like this...
So if anyone has a driver that they know works on this phone and has definitely used it to upgrade this model in Download mode, please let me know.
Also, if you know of a method to accomplish my goal without using Download mode, please point me to some steps to that method.
Just to avoid the obvious advice, I've tried a great many fixes...
Turned off Fast Startup.
Disabled ability to turn off device for power savings on all USB hubs.
Disabled USB Selective Suspend.
Disabled firewall and all other protection settings in Windows Defender.
Uninstalled my anti-virus.
Disabled Windows automatic device updates in Group Policy.
Made sure all my other devices have the latest drivers.
Update my BIOS to the latest version.
Windows 10 Pro is up to date.
As one person advised, tried to manually update the devices that wouldn't connect using lgx64bus.inf from the driver folder.
And various registry tweaks.
Thanks in advance for any help.
NOTE: In going through all the drivers again, I discovered that version 3.14.1, at least on the surface, is performing exactly as ver 3.11.3 has been. Works perfectly in normal mode, missing ADB device in Download mode. Guess I skipped it in my first few runs. Still doesn't solve my problem, but I strive to be accurate.
NOTE 2: I have found a method for flashing that does not require ABD to flash my phone. I can't find an option to delete this post, so the moderator has my permission to do so at their discretion.

Usb conection problems - nothing helps

Hi,
i cant connect to my phone normally via usb. System windows 10 says "USB device not recognized". I know its a poplar problem and many solutions is on the internet but for me no one solution work. Only way to connect my phone is via wifi debuging via android studio. Maybe someone know that one more solution that can help me ? Is there any chance is that phone problem? I tried difrent cables, computers ... nothing. pls help

Did you install the right drivers?
Make sure you're using a usb data cable (like the original one included with the phone)
Try different USB ports on your computer.
Make sure you've set your pixel to "Data transfer on USB connection".

I'll repeat the last point again, because it's probably the solution to your problem:
Make sure to set your pixel to file transfer when you plug in the phone to the pc. Most people say that the pixel defaults to "no file transfer" or just "charging". That isn't any good for you, as you want to transfer files. Once your phone is connected to your computer, swipe down to your notification shade, and you should see a normal or silent notification that has to do with the USB connection. If you have usb debugging enabled, it will also show another notification for that. Click on the one for the usb connection. It will open a menu, here you must select "File transfer". You might have to do this every time your connect your phone. Some phones have an option to change the default setting in developer options.
Hope I helped!
If I solved your problem, please mark this post as the solution, to help out other users.

Yes i have a correct drivers and cable but windows said that its not drivers for it. After plug usb in android what it must do after connection is all blured.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Would have preffered it if the image was in english, oh well.
try selecting the option on the top and seeing if windows can get any drivers for it.
if you've got no luck, then install the drivers manually.

When i try this first option (USB stering by conected device) it says "Cannot connect"
I try instal manually but dont work. For windows this is not a mobile device.

I have a pixel 4a that took a quick swim. The USB port allows charging but not data.
It's probably not the same thing you are seeing, since it literally doesn't show up as a port to either the phone or the PC.

I wasnt have any water conection or damage. I dont know what it could be. Do you think its a port problem? Windows sees some device but wont select good driver for it. I can't do it even when i pick exactly driver for it. Its frustrating that i watched video's that says " its Simple and now lets do this or that" and of course i have biger problem with it. Like i said i have connection VIA android studio. Maybe is there any file that i can put to Pixel for better recognization ?

Try using an installer for installing its drivers, rather than manually installing signed/unsigned drivers in device manager.
chytrypch said:
I wasnt have any water conection or damage. I dont know what it could be. Do you think its a port problem? Windows sees some device but wont select good driver for it. I can't do it even when i pick exactly driver for it. Its frustrating that i watched video's that says " its Simple and now lets do this or that" and of course i have biger problem with it. Like i said i have connection VIA android studio. Maybe is there any file that i can put to Pixel for better recognization ?
Click to expand...
Click to collapse

I don't understand. How can i install driver other than in device manager ? I do install drivers by Android studio too. I can see that even my external mic (Blue yeti with usb c adapter) is not visible for pixel. I tried too with external memory and it works fine. is there any chance that is faulty usb port?
Please let me know what do you mean with installer. Thanks for responses.
edit. I tried also with forcing in developer options usb connects to media files transfer. dont work

A bit off that NOTHING works, could be a faulty port. Bring it to a service centre or a repair shop if a service centre isnt easily accessbile for you.

chytrypch said:
[...] I tried difrent cables, computers [...]
Click to expand...
Click to collapse
Can you rule out that it is a Windows problem with your specific Pixel 4a device by simply starting a bootable Linux (Ubuntu, Mint, etc.) from a USB flash drive and trying the connection there?

Ah ... tried to open pixel, and for no reason screen dies. Opened it gently with no breaks but now have litle flickers. I bought Nord 2. I see in auction in Poland one more person have usb problem so i guess its finally port problem (this module). Thanks for all responses and help.

Question I have 2 identical S21 but only one can connect to AA

Hello everyone.
So I recently bought 2 Samsung S21 for me and my wife, but only one is recognized by our car, the other not. I suspect that somehow the problem is with USB File Transfer not being correctly enabled.
For the cell phone that works, we plug it to the car via USB cable and instantly the car recognizes it, pair and works.
For the fault cell phone, we connect it to the car via USB cable and nothing happens, it just start charging and nothing more.
I could see that the working cell phone has a "USB Settings" menu accessible via notification panel, while the other one doesn't. Talking about this menu:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I already:
Accessed the Developer Options and changed Default USB configuration to Transfering files
Did a Factory data reset (soft reset)
Restarted the car's system to factory default
Any other ideas?
Thanks in advance
Working cell phone info
Model name: SM-G990B2/DS
Android version: 13
Kernel version: 5.4.147-qgki-25323472-abG990B2XXS1DVK4 #1 Tue Nov 22 22:26:13 KST 2022
Build number: TP1A.220624.014.G990B2XXS1DVK4
Fault cell phone info
Model name: SM-G990B2/DS
Android version: 13
Kernel version: 5.4.147-qgki-25323472-abG990B2XXU1DVK3 #1 Thu Nov 10 07:32:06 +07 2022
Build number: TP1A.220624.014.G990B2XXU1DVK3

Normally a phone has to first connect via Bluetooth. Check if the faulty phone does so. If not, bluetooth pair it with your unit.
Only then connect it it via USB to your unit and see if it now works.
Even though this is a phone question, next time mention what kind of unit you have, which Android version level, etcetera.

surfer63 said:
Normally a phone has to first connect via Bluetooth. Check if the faulty phone does so. If not, bluetooth pair it with your unit.
Only then connect it it via USB to your unit and see if it now works.
Even though this is a phone question, next time mention what kind of unit you have, which Android version level, etcetera.
Click to expand...
Click to collapse
Yes @mobilefox , very important information to us to help providing well targeted answers !

Thank you for the answer.
I just noticed the faulty phone cannot transfer files to Windows and the working one can. It is the same behavior, when connected to USB, just charging. Must be something about data/transfer not enabled

Android 12 I suppose, check if , when connected via usb, both units ask for data transfer / charging only question !

mobilefox said:
Thank you for the answer.
I just noticed the faulty phone cannot transfer files to Windows and the working one can. It is the same behavior, when connected to USB, just charging. Must be something about data/transfer not enabled
Click to expand...
Click to collapse
Or a faulty USB-C connector. My previous Samsung had that as well.

Just an update:
I could manage to make the faulty phone to connect both to computer and car.
The only way I could do it was:
Plug-in the USB cable both in phone and car/computer
With cable connected and phone charging, access Developer Options
Changed Default USB configuration from "Transfering files" to any other options (Transferring images by example). Right after doing it, "Transferring files" turned into "Transferring files / Android Auto"
Changed back to "Transferring files"
Doing it the car recognized the phone immediately and could open Android Auto.
The only problem is that doing this, bluetooth connection gets unavailable (what makes no sense to me).
It is not the ideal, I'd like to use both AA and Bluetooth like in the working phone, but posting here to maybe help someone else having this issue.
If I can manage to get this working 100% I'll post again.
Thank you for the answers.
Btw, the Android Version is 13 and not 12 as I commented at the end of my first post.

mobilefox said:
Just an update:
I could manage to make the faulty phone to connect both to computer and car.
The only way I could do it was:
Plug-in the USB cable both in phone and car/computer
With cable connected and phone charging, access Developer Options
Changed Default USB configuration from "Transfering files" to any other options (Transferring images by example). Right after doing it, "Transferring files" turned into "Transferring files / Android Auto"
Changed back to "Transferring files"
Doing it the car recognized the phone immediately and could open Android Auto.
The only problem is that doing this, bluetooth connection gets unavailable (what makes no sense to me).
It is not the ideal, I'd like to use both AA and Bluetooth like in the working phone, but posting here to maybe help someone else having this issue.
If I can manage to get this working 100% I'll post again.
Thank you for the answers.
Btw, the Android Version is 13 and not 12 as I commented at the end of my first post.
Click to expand...
Click to collapse
Steps 1, 2, 3 and 4 done in the phone ?

Yes, all steps on the phone.