Hi people,
I've flashed twrp 2.7.0.1 on my desire s and then cm11. All worked very fine until today.
Now I want enter in recovery mode (bootloader->recovery), but my smartphone boot in Android system and not in recovey. I've tried to reflash twrp, but this not resolves the problem.
Help me please
d728370 said:
Hi people,
I've flashed twrp 2.7.0.1 on my desire s and then cm11. All worked very fine until today.
Now I want enter in recovery mode (bootloader->recovery), but my smartphone boot in Android system and not in recovey. I've tried to reflash twrp, but this not resolves the problem.
Help me please
Click to expand...
Click to collapse
Have you tried the adb command
Adb reboot recovery
?
Sent from my Desire S using Tapatalk
Greetings, my lenovo a526 is stuck at lenovo logo.
I already tried wiping cache in stock recovery, but in wipe data/factory reset it says default data flag fail something like that.
Reboot, im still stuck
Then i tried flashing stock rom using spft it was successful yet still stuck at logo.
So I thought i should flash twrp or cwm recovery to install custom rom in sd card
I used adb fastboot. To flash those recovery because my stock recovery doesn't have "install zip in sdcard"
In fastboot,
My device is detected when i execute
Fastboot devices
"mt6582_phone --- device"
I cannot flash cwm or twrp directly because when i do it says remote partition does not support flash.
I believe i need to unlock bootloader first.
So i execute
Fastboot oem unlock
The result is 3 dots loading like forever
Now im in a dead end, i know i have to confirm it in my device but it has no display only logo.
Please, i need help. Is there any way to execute fastboot oem unlock without confirming in my device?
Hi mr__gutz
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device yet, our experts at the below forum should be able to help you. Please be welcome to post over in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.
mr__gutz said:
Greetings, my lenovo a526 is stuck at lenovo logo.
I already tried wiping cache in stock recovery, but in wipe data/factory reset it says default data flag fail something like that.
Reboot, im still stuck
Then i tried flashing stock rom using spft it was successful yet still stuck at logo.
So I thought i should flash twrp or cwm recovery to install custom rom in sd card
I used adb fastboot. To flash those recovery because my stock recovery doesn't have "install zip in sdcard"
In fastboot,
My device is detected when i execute
Fastboot devices
"mt6582_phone --- device"
I cannot flash cwm or twrp directly because when i do it says remote partition does not support flash.
I believe i need to unlock bootloader first.
So i execute
Fastboot oem unlock
The result is 3 dots loading like forever
Now im in a dead end, i know i have to confirm it in my device but it has no display only logo.
Please, i need help. Is there any way to execute fastboot oem unlock without confirming in my device?
Click to expand...
Click to collapse
1. Get bootloader unlock code https://emui.huawei.com/en/plugin/unlock/index
2. Enter fastboot mode [voldwn+pwr] and unlock bootloader (fastboot oem unlock xxxxxxxxxxxxxxxxxx)
2. Download and flash TWRP_3.0.2_CUN-l03-l21.img or View attachment CWM_CUN-l03-l21.img recovery from fastboot (fastboot flash recovery xxxxxxxx.img)
3. Enter TWRP/CWM recovery mode [volup+pwr] flash supersu.zip and its done!:good:
https://youtu.be/nh9o8kP6HhA
Tested and working on CUN-L21 and L03, please test it on L29, l22, etc and post here the result!
FOR L21 USERS: THIS ONLY WORKS FROM B103 UPDATE YOU CAN TRY WITH THIS(sdcard method) or THIS(not tested)
CREDITS: CELULARSERVICE.UY
Awesome man
hernankano said:
1. Get bootloader unlock code https://emui.huawei.com/en/plugin/unlock/index
2. Enter fastboot mode [voldwn+pwr] and unlock bootloader (fastboot oem unlock xxxxxxxxxxxxxxxxxx)
2. Download and flash TWRP_3.0.2_CUN-l03-l21.img or View attachment 3999777 recovery from fastboot (fastboot flash recovery xxxxxxxx.img)
3. Enter TWRP/CWM recovery mode [volup+pwr] flash supersu.zip and its done!:good:
https://youtu.be/nh9o8kP6HhA
Tested and working on CUN-L21 and L03, please test it on L29, l22, etc and post here the result!
CREDITS: CELULARSERVICE.UY
Click to expand...
Click to collapse
Absolutely Brilliant !!
Works perfectly on the CUN-L01.
Thanks again.
Sparkrite said:
Absolutely Brilliant !!
Works perfectly on the CUN-L01.
Thanks again.
Click to expand...
Click to collapse
Thank you, I'm glad that it worked for you.
Hi, thanks for the solution! Can I backup all of my data (system, app data) before unlocking bootloader? I can't root actually.
hollarp said:
Hi, thanks for the solution! Can I backup all of my data (system, app data) before unlocking bootloader? I can't root actually.
Click to expand...
Click to collapse
You can backup your apps by using any of the apps available from play store, however without root these probably won't backup the apps data.
No need to backup system as this won't be affected by unlocking bootloader. The recovery partition will of course be overwritten when you flash TWRP.
Remember unlocking bootloader does factory reset the phone.
y5 cun-l21
help me!!! after flashing recovery i cant boot to recovery im trying with adb and manual but it shows huawei logo and reboots to normal mode
huawei y5 ii cunl21
t214 said:
help me!!! after flashing recovery i cant boot to recovery im trying with adb and manual but it shows huawei logo and reboots to normal mode
huawei y5 ii cunl21
Click to expand...
Click to collapse
How exactly are you flashing your modified recovery?
Remember after flashing it you MUST immediately boot into recovery (Vol up + Power) or else the system will replace it with the stock recovery.
Sparkrite said:
How exactly are you flashing your modified recovery?
Remember after flashing it you MUST immediately boot into recovery (Vol up + Power) or else the system will replace it with the stock recovery.
Click to expand...
Click to collapse
im flashing it with fastboot and after that im trying to go to recovery but it shows huawei logo for few seconds and rebooting now i cant go to recovery and i cant find stock recovery anywhere
t214 said:
im flashing it with fastboot and after that im trying to go to recovery but it shows huawei logo for few seconds and rebooting now i cant go to recovery and i cant find stock recovery anywhere
Click to expand...
Click to collapse
Don't know why its not working but here is a link to two genuine stock ROMS for the y5II.
http://consumer.huawei.com/lk/mobile-phones/support/downloads/huawei-y5ii_lk.htm
If you dont want to try flashing the whole rom then download "HuaweiUpdateExtractor" tool and extract just
the recovery partition from either of the roms and flash just that recovery.
Let me know how you get on.......
i have flashed stock recovery and it worked it means i could go to recovery but when i want to flash again twrp or cwm it isnt working
after flashing twrp/cwm the huawei logo shows for 1 second and again rebooting to normal mode
cant flash whole rom because of "error: current version is not in VERLIS, unallow to update."
t214 said:
i have flashed stock recovery and it worked it means i could go to recovery but when i want to flash again twrp or cwm it isnt working
after flashing twrp/cwm the huawei logo shows for 1 second and again rebooting to normal mode
cant flash whole rom because of "error: current version is not in VERLIS, unallow to update."
Click to expand...
Click to collapse
Which stock recovery did you flash and did you use the Huawei Extract tool to extract it, if so what size was it exactly?
i was trying to flash both with cun-l22 recovery using update.app
Excelent!!!!
Working on CUN-L23. Thanks!!!
t214 said:
i was trying to flash both with cun-l22 recovery using update.app
Click to expand...
Click to collapse
OK, you are not giving me much information as to EXACTLY what you are doing, like what commands you are using and the responses you are getting and so are making it very difficult for me to help you.
Do you have a working recovery or not ?
BTW you cannot flash the Update.app from recovery, I suggest you do some research on how to use Dload.
I have attached a small PDF to get you going.
Huawei Update extractor tool is very handy though.
custom recoveries from this topic dont work for me
my stock recovery (cun-l21) dont work(cant get it anywhere)
flashed recovery from cun-l22 works but from cun-l29 its not working
now i only have cun-l22 recovery working on my phone
trying to flash stock rom (CUN-U29, C567B128, Sri Lanka) using cun-l22 recovery it shows: "verify: uboot partition unallowed chang, old_address=1c80000, new_address=712000 error: partition verify is failed Update /sdcard/dload/update.app failed"
trying to flash stock rom (CUN-L22, C567B128, Sri Lanka) using cun-l22 recovery and it shows: "main version from property is cun-l21c79b104-1 the cur_num:1 update_num:1 version check failed error: current version is not in verlis, unallow to update Update /sdcard/dload/update.app failed"
i was trying to flash using recovery/vol up +vol down+power/in system option using update
Can I use this recovery on cun u-29
Same problem here as t214. I have the CUN-L21. Flashed twrp , didn't work , flashed back the L22 stock recovery , that doesn't work for me also so now i don't have any recovery. Does anybody have a solution for this ?
---
L.E. : managed to make the stock CUN-L22 recovery work , but still cannot flash TWRP or CWM , both cause 1-2 reboots and then normal booting , then i have to revert to stock again.
Can confirm this DOES NOT WORK on the CUN-L21. After flashing, Trying to boot into custom recovery takes you to a black screen for 1 second then continues to 'normal boot'. Now I have no recovery at all. What do I do?
HellBlaZer69 said:
Can confirm this DOES NOT WORK on the CUN-L21. After flashing, Trying to boot into custom recovery takes you to a black screen for 1 second then continues to 'normal boot'. Now I have no recovery at all. What do I do?
Click to expand...
Click to collapse
Hello. Do what sparkrite said on the first page. Download the full rom from that Huawei website (the cun-l22 one , but it works). Download huawei update extractor and load in it the update.app. inside you will see recovery.img. Right click and extract. Flash that. Worked for me , i have stock l22 recovery , i don't know if it will be a problem on the long run but i can't find it for l21 anywhere.
Good Evening,
I own a Samsung Grand Neo Plus (GT-I9060i) and I was running a dotOS v1.2, rooted and bootloader unlocked. I recently downloaded an app called Rashr from Play Store to flash a TWRP recovery because i couldn't flash the stock rom in my CWM recovery, after flashing the TWRP img file the phone rebooted and nothing more happened, I tried to go into recovery mode but nothing happen, even doesn't boot into the System, and when i try to flash the stocke frimware and the TWRP recovery with odin the windows says that the USB not recenized even i am allready have all drivers installed and updated and in bootloader mode .. i have another I9060i it works with no problems with Odin and Windows
Now I don't have recovery to flash a Rom and the Windows USB Problem and no System
I just want to fix the USB Problem or just a idea to install any recovery to flash any Rom to get the phone to life again
If anyone can help me i will be very happy,
Thank You
georgemshaty said:
Good Evening,
I own a Samsung Grand Neo Plus (GT-I9060i) and I was running a dotOS v1.2, rooted and bootloader unlocked. I recently downloaded an app called Rashr from Play Store to flash a TWRP recovery because i couldn't flash the stock rom in my CWM recovery, after flashing the TWRP img file the phone rebooted and nothing more happened, I tried to go into recovery mode but nothing happen, even doesn't boot into the System, and when i try to flash the stocke frimware and the TWRP recovery with odin the windows says that the USB not recenized even i am allready have all drivers installed and updated and in bootloader mode .. i have another I9060i it works with no problems with Odin and Windows
Now I don't have recovery to flash a Rom and the Windows USB Problem and no System
I just want to fix the USB Problem or just a idea to install any recovery to flash any Rom to get the phone to life again
If anyone can help me i will be very happy,
Thank You
Click to expand...
Click to collapse
Samsung has download mode, not bootloader mode(kinda the same but not exactly because download mode is not fastboot compatible but devices with bootloader mode are fastboot compatible).
As for the issues you're having, try this thread for troubleshooting a failed Odin flash.
https://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Sent from my LGL84VL using Tapatalk
My Micromax q465 has been soft bricked after I tried to root it. I had flashed twrp recovery (which actually belonged to some other phone cuz I couldn't find one for my phone) and also done flash boot. Now my phone is stuck on "powered by android" when I power up or try to access recovery mode.
dummyani said:
My Micromax q465 has been soft bricked after I tried to root it. I had flashed twrp recovery (which actually belonged to some other phone cuz I couldn't find one for my phone) and also done flash boot. Now my phone is stuck on "powered by android" when I power up or try to access recovery mode.
Click to expand...
Click to collapse
Flash your stock firmware or extract your stock recovery from your firmware and then flash the stock recovery.
Sent from my SM-S767VL using Tapatalk