Hi,
I do have an unlocked version of Samsung Galaxy S7; model SM-G930F(international model), which I brought from Jet.com. I am using T-mobile sim prepaid sim on it.
For the past few weeks its showing problem of re-starting and hangs on Samsung boot screen(first screen with Samsung name and galaxy s7 logo) with blue light on top always on. I tried factory reset, but did not work and happens too often these days. There is no fixed way of getting out of it. Sometimes it works by clearing the cache, at times by logging in on safe mode and rebooting, then at times by charging for a while and turning it on etc...
From looking into the forums and discussion, I have the feeling that its related to bootloop or bricked phone. The only thing left to do is install firmware once again with ODIN. But I am confused on which firmware to download. Can anyone help me with which is the best one to install? Below is the phone details.
AP : G930FXXU1BPLB
CP: G930FXXU1BPJJ
CSC: G930FUUB1BPL4
Any help of this is much appreciated.
you should install all of them, in the order it says,
brianj41 said:
you should install all of them, in the order it says,
Click to expand...
Click to collapse
OK. But do you have the link to the firmware that I can use? I am not sure from the above information which firmware would be suited for my version of Galaxy S7. Looking for the downloadable firmware.
gopikn123 said:
OK. But do you have the link to the firmware that I can use? I am not sure from the above information which firmware would be suited for my version of Galaxy S7. Looking for the downloadable firmware.
Click to expand...
Click to collapse
Hi mate
You had a Marsmellow firmware you can basically flash any official firmware you want , as long as it belongs to a G930F , pick a country similar or same to where you live
Check here
Get a Nougat firmware they are working fine, follow the intruction in how to flash , pick CSC or home_csc , CSC will factory rest your phone will it leave it like new , if you use home_csc has to be same as the one you have your phone then you will not lose any data
SM - G930F
Thank you!!
I got the file downloaded now. Do I need to select all the AP, BL, CP and CSC on the ODIN software to reset it?
gopikn123 said:
Thank you!!
I got the file downloaded now. Do I need to select all the AP, BL, CP and CSC on the ODIN software to reset it?
Click to expand...
Click to collapse
hi
Yes with those 4 files the phone will be clean as new
MAX 404 said:
hi
Yes with those 4 files the phone will be clean as new
Click to expand...
Click to collapse
Today morning again the phone got hanged in the bootscreen. So, I decided to run the ODIN3 with all the 4 files selected. I installed the Samsung drviers and followed all the instruction and run the application with all the 4 files selected. The process showed success in the ODIN3 application. But even after that, the phone is stuck on the bootloader Samsung with Galaxy S7 logo.
Any idea what to do next or how to resolve this issue?
gopikn123 said:
Today morning again the phone got hanged in the bootscreen. So, I decided to run the ODIN3 with all the 4 files selected. I installed the Samsung drviers and followed all the instruction and run the application with all the 4 files selected. The process showed success in the ODIN3 application. But even after that, the phone is stuck on the bootloader Samsung with Galaxy S7 logo.
Any idea what to do next or how to resolve this issue?
Click to expand...
Click to collapse
Hi
Did you use CSC? do a factory reset and flash again
MAX 404 said:
Hi
Did you use CSC? do a factory reset and flash again
Click to expand...
Click to collapse
Yes, I did that.
gopikn123 said:
Yes, I did that.
Click to expand...
Click to collapse
Did you factory reset from recovery and flashed firmware again?
Perhaps someone can answer a similar question for me? I have the XEU nougat beta firmware, can I flash the BTU final nougat without needing to factory reset?
MAX 404 said:
Did you factory reset from recovery and flashed firmware again?
Click to expand...
Click to collapse
Yes, I tried it again. But didn't work. Now it shows a black screen with the blue light always on.
gopikn123 said:
Yes, I tried it again. But didn't work. Now it shows a black screen with the blue light always on.
Click to expand...
Click to collapse
OK.... here is the SAD news.. I gave the phone for repair on a local cellphone shop. They did some testing on it and said its related to software. After trying to fix it with installing software and other fix they called me a while back and said `THERE IS NO FIX FOR IT`.
Not sure what to do with it. Bought this unlocked only 6 months back and its already dead....
Never going for another Galaxy for sure.
senote said:
Perhaps someone can answer a similar question for me? I have the XEU nougat beta firmware, can I flash the BTU final nougat without needing to factory reset?
Click to expand...
Click to collapse
Yeah, you can do that, but is preferable to do the flash then a factory reset...
Related
last night i went to sleep with m galaxy s6 g920f STOCK 5.1.1 had a fair amount of battery left in t. When a woke up in the morning my phone was dead i thought the battery would have been consumed . I plugged it in charged it . Now when i try to turn it on it just jo to "samsung Galxy s6" logo ,screen becomes a bit yellowish and the phone restarts same thing is happening again and again.
Now i have tried to reinstall to odin, then going into recovery factory reset cache but same results. anyone please help this phone was running stock os so... i have searchd the web but there are no ways to fix it ...
Regards
any help please !
guys i need your help please
I would suggest you download a ROM from Sammmobile that corresponds to your country and install that via ODIN and if that doesn't work try one from a different country or one tha is unknown (I.E. that doesn't belong to a any country), I softbricked my phone trying to install H3G for UK and for what ever reason it would not install. However...
I downloaded one called BTU and that worked using this app SamFirm. To get my version I installed type the Model number SM-G920F and Region BTU to download, once it has downloaded then decrypt the file by clicking the Decrypt button and unzip the decrypted file and then use ODIN to install that one. Using the SamFirm app downlaods it faster and gets the latest from Samsung as far as I am concerned. Good Luck.
protonpower said:
I would suggest you download a ROM from Sammmobile that corresponds to your country and install that via ODIN and if that doesn't work try one from a different country or one tha is unknown (I.E. that doesn't belong to a any country), I softbricked my phone trying to install H3G for UK and for what ever reason it would not install. However...
I downloaded one called BTU and that worked using this app SamFirm. To get my version I installed type the Model number SM-G920F and Region BTU to download, once it has downloaded then decrypt the file by clicking the Decrypt button and unzip the decrypted file and then use ODIN to install that one. Using the SamFirm app downlaods it faster and gets the latest from Samsung as far as I am concerned. Good Luck.
Click to expand...
Click to collapse
Thank you very much for your reply i have tried flashing 6 stock firmwares but to no avail ? Can you suggest anything else ?
M.Nabeel said:
Thank you very much for your reply i have tried flashing 6 stock firmwares but to no avail ? Can you suggest anything else ?
Click to expand...
Click to collapse
The only thing I can think of is trying one from your country and trying any other one. You can use the SamFirm software to download different versions, else I think your phone is broken for some unknown reason and you will have to get it fixed under the warranty. Or install the Samsung Smart Switch from samsung and get the firmware installed that way via the Emergency Software and recovery mode, but it will wipe everything and do a factory reset. Also you will need the serial number and model number of your phone.
OK, no matter what method I try I am unable to achieve a successful flash of my phone. I have tried it via odin with many different firmware versions but all seem to fail almost immediately. The only way to resolve this is to use samsung switch and reset phone to stock. The problem is stock firmware is german vodafone full of vodafone bloatware, I want to get rid of it and flash a UK unbranded firmware but no matter what I do I am unable to achieve this. I can see from the forum that there are many people out there with the same flashing problem but with no real responses on how to achieve the goal. There must be people out there that have achieved this task but don't seem to be offering up much help?
ok
sinbrad said:
OK, no matter what method I try I am unable to achieve a successful flash of my phone. I have tried it via odin with many different firmware versions but all seem to fail almost immediately. The only way to resolve this is to use samsung switch and reset phone to stock. The problem is stock firmware is german vodafone full of vodafone bloatware, I want to get rid of it and flash a UK unbranded firmware but no matter what I do I am unable to achieve this. I can see from the forum that there are many people out there with the same flashing problem but with no real responses on how to achieve the goal. There must be people out there that have achieved this task but don't seem to be offering up much help?
Click to expand...
Click to collapse
Is your phone international unlocked out of the box? I dont believe it was, because as far as I've read international unlocked phones come with "unbranded" firmware. The unlocked ones I know can be pretty much flashed with "any" international firmware, which is what you are trying to do.
If you dont know for sure. Odin the stock German Vodaphone. Let the phone boot. Boot back to stock recovery, then factory reset and clear cache.
Then let the phone boot...Download phone info app by vndnguyen (free version is fine)...Open the app, go to CSC Code tab. Then that will tell you the active CSC code and your firmware CSC code...you are looking for the line that says Available CSC Codes. If it only lists German Vodaphone (VD2), then I believe you are stuck til the phone is unlocked.
Anyone, jump in here if I'm mistaken. I am using this as reference as, I've checked my G920F. Mine is unlocked tho and I can flash any firmware from any region with no problem. Hopefully I've answered your question.
I had no luck with the firmwares on the firmware page either.
If you are on OI9 check http://forum.xda-developers.com/galaxy-s6/general/guide-android-6-0-marshmallow-beta-how-t3277533
And try flashing the first stock firmware https://drive.google.com/folderview...sharing&tid=0B40ItdHKfkyQd1hJQXVDU3dDU2c#list (not the android M one!) via ODIN.
Basic process is:
Download the above file, extract, there should be 4 files inside (AP,BL,CP,CSC), simply select each one to go in the relevant box on ODIN, then go into download mode on your phone and click start...
N.B. Be aware that the above firmware contains a PIT file which will reformat and resize the partitions on your phone, so make sure you have a copy of the stock firmware that works before trying the flash (i.e. the one which Smart Switch downloads). You can grab it from your windows %TEMP% directory during the smart switch download (it first downloads a file to TMPxxx, then extracts it into a directory of the same name, its these files you want. They should be the four files beginning with the type of ODIN file you are flashing (AP,BL,CP,CSC). The files get deleted after the firmware has flashed so make sure you watch the process. If things go wrong you can re-flash these files via ODIN
As far as I was led to believe and when I purchased the phone it did state factory unlocked. I was able to put in any sim when I received it and didn't have to go through any aftermarket unlock process?
I have the same problem i have a unlocked G-920F with egyptian CSC and firmware 5.1.1 .when i try to flash BTU 5.1.1 via odin, i have the same problem and only way to recover is via smart switch.BTU firmware is from sammobile
abdussamad said:
I have the same problem i have a unlocked G-920F with egyptian CSC and firmware 5.1.1 .when i try to flash BTU 5.1.1 via odin, i have the same problem and only way to recover is via smart switch.BTU firmware is from sammobile
Click to expand...
Click to collapse
So, seems this is not uncommon?
ok the way to do it is download this file
https://drive.google.com/folderview...sharing&tid=0B40ItdHKfkyQd1hJQXVDU3dDU2c#list
its BTU firmware of 5.1.1
and flash this firmware you'll have 4 files AP,BL,CP,CSC,put it in the respective boxes in odin.I have tested this right now and it works
Press "thanks" if i have helped
Well downloaded the app for CSC info and it states available CSC codes are...
ATL, AVF, CNX, CYV, MOB, MTL, OMN, SIM, SWC, TCL, VD2, VDC, VDF, VDH, VDI, VGR, VIP & VOD
Any ideas?
Ok, tried to get stock firmware when samsung smart switch was downloading and installing but couldn't see where the firmware was being downloaded to? Tried windows temp etc but nothing appeared during download and install?
sinbrad said:
Ok, tried to get stock firmware when samsung smart switch was downloading and installing but couldn't see where the firmware was being downloaded to? Tried windows temp etc but nothing appeared during download and install?
Click to expand...
Click to collapse
Just type in %TEMP% into you windows explorer address bar and it will take you there. arrange by date modified and you will see the size ticking up during the download, before the flash starts it will extract into a folder with the same name, the md5 files can be grabbed from there
No probs here
abdussamad said:
I have the same problem i have a unlocked G-920F with egyptian CSC and firmware 5.1.1 .when i try to flash BTU 5.1.1 via odin, i have the same problem and only way to recover is via smart switch.BTU firmware is from sammobile
Click to expand...
Click to collapse
I flashed BTU firmware on my 920F international unlocked that came with UAE firmware without any problems. Idk
sd_N said:
I flashed BTU firmware on my 920F international unlocked that came with UAE firmware without any problems. Idk
Click to expand...
Click to collapse
Which file and which method?
aaronjp said:
Just type in %TEMP% into you windows explorer address bar and it will take you there. arrange by date modified and you will see the size ticking up during the download, before the flash starts it will extract into a folder with the same name, the md5 files can be grabbed from there
Click to expand...
Click to collapse
Ok, Got it this time, all four files. Will give the method above a go and if it fails at least I've got the stock firmware to fall back on?
Magic, have had great success. Now on the BTU firmware and everything is up and running. Got the stock as well just in case but if this continues to work won't be reinstalling stock. So a big thanks to those who helped
sinbrad said:
Magic, have had great success. Now on the BTU firmware and everything is up and running. Got the stock as well just in case but if this continues to work won't be reinstalling stock. So a big thanks to those who helped
Click to expand...
Click to collapse
Glad you are sorted
Hi Guys,
I have a British Galaxy S7 (SM-G930F). I flashed (using the latest ODIN) a Dutch firmware on it that I downloaded from sammobile, but during the proces it was stuck on system.img. The phone doesn't start anymore. I triend to flash back the original firmware but it also was stuck on system.img. I also tried other firmwares, but no luck. The only thing I can do with the phone is getting to the Download mode.
I have done a lot of research online to get it working but no chance. The phone had FRP LOCK before I flashed it. Does that cause the problem?
Could you please advise me at this matter? It is really frustrating.
Hello,
Use Smart switch for restore, there're many tuto on Youtube
Smart Switch is app by samsung, it's available on their website.
zamalia59 said:
Hello,
Use Smart switch for restore, there're many tuto on Youtube
Smart Switch is app by samsung, it's available on their website.
Click to expand...
Click to collapse
I have tried that but smartswitch does not recognize the phone at all :$
What version of ODIN are you using?
Sent from my SM-G930F using Tapatalk
I have noticed you are using DRA9 firmware. You need to use software that also has bootloader in same version. Any other will not work.
Cholek3 said:
I have noticed you are using DRA9 firmware. You need to use software that also has bootloader in same version. Any other will not work.
Click to expand...
Click to collapse
Is that new since DRA9?
First I've heard for the unlocked G930F, always been able to flash any firmware to it regardless
coto39 said:
What version of ODIN are you using?
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
I used ODIN 3.12.3 and 3.12.7 and I got the same result with both.
Cholek3 said:
I have noticed you are using DRA9 firmware. You need to use software that also has bootloader in same version. Any other will not work.
Click to expand...
Click to collapse
I tried to flash the original firmware back but no luck.
United Kingdom (H3G) - G930FXXS2DRA9 (7.0)
I assume that this one has the same bootloader version.
*Detection* said:
Is that new since DRA9?
First I've heard for the unlocked G930F, always been able to flash any firmware to it regardless
Click to expand...
Click to collapse
How do you flash firmware then if you just have access to the Download mode on a phone and FRP LOCK is ON?
From what I've read FRP only affects the system and your ability to use android and access the partition data after performing a Factory Reset from outside the system (using for example a custom recovery). It should not stop you from flashing a rom in Download mode. I remember myself being in the same trouble as you are, with system getting stuck while flashing. I can't remember how I solved it. I'll search my chrome bookmarks and report back.
Have you tried changing the usb port (the one your are connecting the phone to) and/or the usb cable?
Sent from my SM-G930F using Tapatalk
riffina said:
How do you flash firmware then if you just have access to the Download mode on a phone and FRP LOCK is ON?
Click to expand...
Click to collapse
Same way you would if FRP lock was off, as that is the way to fix FRP lock
ODIN 3.12.3 or newer
Put phone in download mode
Connect to PC USB
Check Re-partition in ODIN options if changing CSC (Might be an idea anyway)
Flash AP, CP, BL and CSC together
Allow phone to reboot
*Detection* said:
Is that new since DRA9?
First I've heard for the unlocked G930F, always been able to flash any firmware to it regardless
Click to expand...
Click to collapse
Newest bootloader (DRA#) locks phone for changing csc and downgrade, but that mainly fails at loading "param.bin" in odin. There is still a possibility to change CSC or downgrade, but you have to mix and match two different firmwares.
riffina said:
I tried to flash the original firmware back but no luck.
United Kingdom (H3G) - G930FXXS2DRA9 (7.0)
I assume that this one has the same bootloader version.
Click to expand...
Click to collapse
Try flashing BTU then.
coto39 said:
From what I've read FRP only affects the system and your ability to use android and access the partition data after performing a Factory Reset from outside the system (using for example a custom recovery). It should not stop you from flashing a rom in Download mode.
Click to expand...
Click to collapse
That is totally correct.
Cholek3 said:
Newest bootloader (DRA#) locks phone for changing csc and downgrade, but that mainly fails at loading "param.bin" in odin. There is still a possibility to change CSC or downgrade, but you have to mix and match two different firmwares.
Try flashing BTU then.
That is totally correct.
Click to expand...
Click to collapse
I have just tried to flash BTU (G930FXXS2DRAA)... I got the same result as by the original firmware. See attachement
Next step... Another computer.
*Detection* said:
Same way you would if FRP lock was off, as that is the way to fix FRP lock
ODIN 3.12.3 or newer
Put phone in download mode
Connect to PC USB
Check Re-partition in ODIN options if changing CSC (Might be an idea anyway)
Flash AP, CP, BL and CSC together
Allow phone to reboot
Click to expand...
Click to collapse
Do you mean that I have to Check re-partition? I thought that I'm not supposed to do that!
I tried to flash just the AP, but still the same problem. see attachment.
In case it helps somebody to see the problem, I took a picture of the info I see on the Download mode. See attachment.
That System Status: custom makes me wonder if this could be the issue? That should not really have anything to do with it, but did you try doing "Wipe Cache Partition" and "Wipe Data/Factory reset" in recovery?
Cholek3 said:
That System Status: custom makes me wonder if this could be the issue? That should not really have anything to do with it, but did you try doing "Wipe Cache Partition" and "Wipe Data/Factory reset" in recovery?
Click to expand...
Click to collapse
Tried it. No luck!
Hi Guys,
I have tried other USB-cables... I have tried 4 of them and one them solved the issue.
I can now conclude that the USB-cables I was using were not good.
Thanks for the answers guys.
Well. nice that you found the culprit. Try to buy an official USB cable from one of the Samsung Service Centers near you. The offcial cable is cheap.. like 5-6 USD the 1m long and 8USD the 1.5m long ones
Sent from my SM-G930F using Tapatalk
Hey guys, I tried to upload my Galaxy S8+ (G955F) in Mexico to Android 8, I downloaded the Spanish version (PHE) that was just released a couple of days ago, it's a free version so I think that wouldn't be any problem. The problem is that I put everything in Odin (AP, BL, HOME CSC, etc), put my phone in download mode, connect it to my laptop and when I click in "Start" Odin just reboot my phone and that's it. Hope you guys can help me!
Have you gone into Settings/Developer and checked your unlock?
New Odin
erick_ezio said:
Hey guys, I tried to upload my Galaxy S8+ (G955F) in Mexico to Android 8, I downloaded the Spanish version (PHE) that was just released a couple of days ago, it's a free version so I think that wouldn't be any problem. The problem is that I put everything in Odin (AP, BL, HOME CSC, etc), put my phone in download mode, connect it to my laptop and when I click in "Start" Odin just reboot my phone and that's it. Hope you guys can help me!
Click to expand...
Click to collapse
! HAVE YOU GOT THE NEW Odin 3.13.1 ? ?
If not thast I why
JeffDC said:
Have you gone into Settings/Developer and checked your unlock?
Click to expand...
Click to collapse
I don't beleive you need to unlock OEM to flash firmware - you would need to if you wanted to flash TWRP - but not if you are flashing a stock rom.
Hello, I've been waiting a really long time for One UI 5 and I couldn't wait anymore once I heard the stable is out in India. I downloaded the INU firmware using Frija then I changed my CSC to INU using SamFwRP tool and flashed the INU firmware using patched Odin. Then I reverted back my CSC to EUX again with SamFwRP.
After all of this, finally did a wipe cache and factory reset. Now I'm wondering...since my CSC is back to EUX...will I still receive OTAs ? For example One UI 5.1 OTA or December security patch whenever that releases
EDIT: Weirdest thing is when I flashed INU HOME_CSC on my phone there was no data that was reset. Is it because they're both OXM ?
EDIT2: DISCLAIMER - I'm not an Android dev, I'm not knowledgeable on anything technical or otherwise. Please take advice from anyone else but me!
Thanks for the tip about Frija, I had forgotten all about that one (been checking sammobile and galaxyfirmware daily for weeks now) I'm downloading now and will edit this post with success or failure! (I'm EUY)
As for your question about still receiving OTAs or not, I honestly don't know because I've rooted every phone I've ever had in 17 years! but I can't see why it would be a problem if you didn't receive them as you can always download them from Frija surly not?
Okay download complete, I'm going in.. wish me luck!
beanbean50 said:
Thanks for the tip about Frija, I had forgotten all about that one (been checking sammobile and galaxyfirmware daily for weeks now) I'm downloading now and will edit this post with success or failure! (I'm EUY)
As for your question about still receiving OTAs or not, I honestly don't know because I've rooted every phone I've ever had in 17 years! but I can't see why it would be a problem if you didn't receive them as you can always download them from Frija surly not?
Okay download complete, I'm going in.. wish me luck!
Click to expand...
Click to collapse
Well yeah, you can. But I don't wanna lol. I'm not a ROM hax0r. I'm just a power user. I don't even have a Windows laptop around most of the time and Heimdall looks scary .
Is EUY the same as EUX ? I saw it on the firmware websites...but I never heard about it. Is it for France or something ? Rest of the EU uses EUX as far as I know.
I think EUX, EUY, INU are just the same ****, not sure. They all have OXM Multi CSC and they kinda look identical tbh as far as numbers go. So if you revert your CSC back to EUY...updates should work, no ?
Success!
I just flashed the Magisk patched AP file the CP file and HOME CSC file and all up and running Android 13/One UI 5... (also rooted) thanks bro..
I think if you revert your CSC back to EUY then yes I can't see any reason why you shouldn't receive OTAs
thought it was too good to be true, keep getting a service provider update required (but it won't update) and access denied here and there. can't even odin flash back to Android 12 for some strange reason hmm
It's working perfectly for me. Have you reverted CSC ? And deleted cache and factory reset after flashing. I have literally 0 errors and 5G works. But I deleted did a wipe cache and factory reset and reverted CSC as well
beanbean50 said:
thought it was too good to be true, keep getting a service provider update required (but it won't update) and access denied here and there. can't even odin flash back to Android 12 for some strange reason hmm
Click to expand...
Click to collapse
Wrote a comment
What Odin version too ? I used the latest PatcheD version from here: https://forum.xda-developers.com/t/patched-odin-3-13-1.3762572/
XME - Malaysia released OneUI 5 Android 13 for Z Flip 3
This is how my INU firmware with EUX CSC looks.
case81 said:
What Odin version too ? I used the latest PatcheD version from here: https://forum.xda-developers.com/t/patched-odin-3-13-1.3762572/
Click to expand...
Click to collapse
tried that one as well, it flashed and booted okay but with tons of errors, luckily I managed to get back to Android 12 and will stay there till the EUY update comes along.
beanbean50 said:
tried that one as well, it flashed and booted okay but with tons of errors, luckily I managed to get back to Android 12 and will stay there till the EUY update comes along.
Click to expand...
Click to collapse
Tons of errors ? Where ? Just curious if I have them as well
case81 said:
Tons of errors ? Where ? Just curious if I have them as well
Click to expand...
Click to collapse
I think it's to do with trying to root it. It detects root and denies access to the PC, to update the service provider and many more things something like 'we have detected a tampered device, please contact your customer service'
beanbean50 said:
I think it's to do with trying to root it. It detects root and denies access to the PC, to update the service provider and many more things something like 'we have detected a tampered device, please contact your customer service'
Click to expand...
Click to collapse
So...this happens when changing CSC ?
case81 said:
So...this happens when changing CSC ?
Click to expand...
Click to collapse
All okay now must have been gremlins .. I think it detects your CSC when installing, it reads your simcard.
Thanks for this thread!
It worked very well for me. Factory reset is a chore after, but everything works and I haven't had any issues so far. I do not root, so nothing to report about that.
Installed the firmware on my BTU phone
Works wonder 0 errors or issues
did Samsung and google cloud backups before flashing during setup restored both and its as if I never did a thing everything was put in its place and it was the most effortless phone setup I ever did
Now I'm just enjoying my android 13
case81 said:
Hello, I've been waiting a really long time for One UI 5 and I couldn't wait anymore once I heard the stable is out in India. I downloaded the INU firmware using Frija then I changed my CSC to INU using SamFwRP tool and flashed the INU firmware using patched Odin. Then I reverted back my CSC to EUX again with SamFwRP.
After all of this, finally did a wipe cache and factory reset. Now I'm wondering...since my CSC is back to EUX...will I still receive OTAs ? For example One UI 5.1 OTA or December security patch whenever that releases
EDIT: Weirdest thing is when I flashed INU HOME_CSC on my phone there was no data that was reset. Is it because they're both OXM ?
Click to expand...
Click to collapse
Hi, flashing the home-csc does not restore the phone to factory settings ( wipe data etc ) If you flash the csc, then your phone will be wiped and restored as it was out of the box. Also you dont have to change CSC, i'm on XSA and I flashed the IDU firmware.... This does not chage the CSC of the phone anyway. A lot of the Samsung firmware are multi - CSC these days.
noel_leon said:
Thanks for this thread!
It worked very well for me. Factory reset is a chore after, but everything works and I haven't had any issues so far. I do not root, so nothing to report about that.
Click to expand...
Click to collapse
I'm not sure you actually have to do it. I'm just a big giant noob with no knowledge in Android, this is why I did all that
slysurfer said:
Hi, flashing the home-csc does not restore the phone to factory settings ( wipe data etc ) If you flash the csc, then your phone will be wiped and restored as it was out of the box. Also you dont have to change CSC, i'm on XSA and I flashed the IDU firmware.... This does not chage the CSC of the phone anyway. A lot of the Samsung firmware are multi - CSC these days.
Click to expand...
Click to collapse
So I could actually just have stayed on EUX without changing my CSC while flashing and everything would have worked fine ? Thanks, that's really good to know!