Features:
CPU Governors
+Interactive+(default)
+Ondemand+
+Conservative+
+Performance+
+Powersave+
+Darkness+
+Intel+
+Lionfish+
+Blu-active+
+Impulse+
+Despair+
+ElementalX+
Other CPU features
+CPU Boost+
Hotplug
+AutoSMP+
Advanced TCP Controls
+Bic+
+Cubic+
+DCTCP+
+Westwood+(default)
+ High-speed+
+Hybla+
+Htcp+
+Vegas+
+Veno+
+Scalable+
+lp+
+Illinos+
Additions
+Nethunter Support ( mac80211 wireless injection and hid patches)+
+Loadshifter+
+kcal+
+Boot with all cores+
Supported devives:
◆Xiaomi Redmi3S◆
◆Xiaomi Redmi 3S Prime◆
◆Xiaomi Redmi 3X◆
Supported ROMs:
●All custom ROMs except MIUI.●
(Wi-Fi isn't working in MIUI)
Forum crosslink:
Arctotal
Credits:
Shoaib Anwar @Shoaib05 (Loadshifter)
Zhao Wei Liew @zwliew (sources)
Testers:
Rajendra Jadhav
Prakash(@pakya18)
Akshat(@akshat2012)
Sai Aswin[/CENTER]
XDA:DevDB Information
Gearbox, Kernel for the Xiaomi Redmi 3S
Contributors
nibaji
Source Code:
GitHub
Kernel Special Features: +Nethunter patches(with 80211 wireless and hid patches)+Loadshifter+Kcal
Version Information
Status: Stable
Current Stable Version: 2nd Gear
Stable Release Date: 2017-05-14
Current Beta Version: G1
Beta Release Date: 2017-02-28
Created 2017-02-28
Last Updated 2017-05-13
Changelog
2nd Gear(latest)
●Reduced min brightness level to ⅓ of the 1st gear
●Zswap (memory compression - results smoothness)
●Added CPU Governors - despair, elementalx, blu-active, impulse (Sorry for those requested zzmove. I just missed it in a configuration file this time. Will be added in next version)
●Added Kcal
●Added AutoSMP hotplug
●Disabled qcom core ctl
●Boot with all cores
1st Gear -Stable
●Added darkness CPU governor
●Added Lionfish CPU Governor
●Added Intel CPU Governor
●Enabled CPU Boost
●Enabled Generic DT based CPUfreq driver
●Enabled Advanced TCP Congestions
●Enabled BIC
●Enabled Westwood
●Enabled Scalable
●Enabled lp
●Enabled Vegas
●Enabled Illinos
●Enabled Highspeed
●Enabled Vegas
●Enabled HTCP
●Enabled DCTCP
●Changed Default TCP Congestion Control from CUBIC to WESTWOOD
G1- Beta
●First Build (everything working)
●nethunter patches (mac80211 wireless injection and hid patches)
●loadshifter
Downloads
2nd Gear - Stable (latest)
Ad free
1st Gear -Stable
Ad free
G1- Beta
Ad free
Donation
I'll consider every single paise of ur donation as an act of appreciation
Paytm:
My upi payment addresses - [email protected]
[email protected]
If u r interested in donation. But unable to proceed please do contact me in private message
Telegram - t.me/nibaji
whats feature on this kernel?
Nethunter support and loadshifter
Sent from my Redmi 3S using Tapatalk
Can it work on mokee rom
nibaji said:
Nethunter support and loadshifter
Click to expand...
Click to collapse
Can you provide link for nethunter
Hemansh said:
Can it work on mokee rom
Click to expand...
Click to collapse
Works
Sent from my Redmi 3S using Tapatalk
What is the core of what the pros, and how does it differ from others? And why there is a gearbox?
kirillmaster4 said:
What is the core of what the pros, and how does it differ from others? And why there is a gearbox?
Click to expand...
Click to collapse
Have a try
Which version of nethunter should we use?
0levi0 said:
Which version of nethunter should we use?
Click to expand...
Click to collapse
Latest nightly works
it would be good if there was a description what will do this kernel ! what is nethunter? why should we use this kernel? pros and cons? etc...
can u please give us a link to the apks we need to install?
+does it work with miui?
thanks in advance for your answer @nibaji
see here for using kali net hunter :-
https://forum.xda-developers.com/xi...ment/kali-net-hunter-redmi-3s-3sp-3x-t3565438
dabi01 said:
can u please give us a link to the apks we need to install?
+does it work with miui?
thanks in advance for your answer @nibaji
Click to expand...
Click to collapse
Wifi seems to be broken in miui. Every other things work.
For nethunter follow this u don't need apks to be installed separately
https://forum.xda-developers.com/xi...ment/kali-net-hunter-redmi-3s-3sp-3x-t3565438
bugggmenot said:
it would be good if there was a description what will do this kernel ! what is nethunter? why should we use this kernel? pros and cons? etc...
Click to expand...
Click to collapse
I'll add more details soon
Use this for nethunter
https://forum.xda-developers.com/xi...ment/kali-net-hunter-redmi-3s-3sp-3x-t3565438
nibaji said:
Wifi seems to be broken in miui. Every other things work.
For nethunter follow this u don't need apks to be installed separately
https://forum.xda-developers.com/xi...ment/kali-net-hunter-redmi-3s-3sp-3x-t3565438
Click to expand...
Click to collapse
tnx
Is it rich in features like Soviet Kernel?
areq1987 said:
Is it rich in features like Soviet Kernel?
Click to expand...
Click to collapse
Have a try.
Updated to 1st Gear
Changelog and downloads in 2nd Post
Related
[url=https://postimages.org/]
[/URL]
This is a home of new re branded yarpiin kernel for Oxygen Os based roms.
Would like to thank to all devs that work has been used to create this kernel.
SO WE STARTING A LIST:
all CREDITS goes to:
@Grarak
@Mahdi786
@Lord Boeffla
@franciscofranco
@ Despair Factor
@ak
@ZaneZam
@varun.chitre15
@flar2
@arter97
@Sultanxda
@eng.stk
@neobuddy89
@Tkkg1994
@frap129
@jcadduono
@savoca
@yank-lu.555
@Dorimanx
@acuicultor
@Maxwen
@bbedward
@nathanchance
@mostafaz
@joshuous
@faux123
@rainforce279
@SuperR. - Awsome ROM Kitchen
@osm0sis - Rom Busybox
@Alucard24
and all others devs that make our lives easier.
Special thanx for @urgali , @Sungfive and @Duncan1982 for testing .
and @Cybertron™ for new thread and signature images .
@Saber for his superb thread with all detailed kernel stuff.
Short Feature list:
KERNEL
Basic Governors plus:
Darkness, Nightmare, Alucard, Impulse, Blu Active
Overclocked both clusters
Adjustable thermal driver
Power Efficient Workqueues
State Notifier Driver
I/o schedulers: fiops, sio, zen, maple
Adrenoboost
Adreno Idler
Simple gpu algorithm
Backlight dimmer
Kacal control
Power Suspend driver
USB Fast Charge
Eagle DTS driver
Built in Busybox
ROM
Magisk Root
Passes SafetyNet Check
De bloated
Busybox
Lineage sms app
Lineage Sounds
Custom wallpalers
AdAway
Substratum
Ozone theme
Powered By White Wolf Kernel
Kernel use a simple free and user friendly kernel control application called Synapse by @AndreiLux for configuration purposes(slightly adding more functionality).
Synapse is included in zip and flashed by default as a system app.
Stand alone kernel use UKM - Lite version. It does contain less settings than standard version for less advanced users. For those who wish to use full power of Synapse additional UKM zip have to be flashed after Kernel.
UKM Full flashable zip download link
https://www.androidfilehost.com/?w=files&flid=154993
Flashing instructions
1. Flash in recovery no black magic
2. If missing tunables for governors set SElinux to permissive
3. Other custom kernel on top of the rom - NO . Why? Kernel is built in the rom so unexpected behavior possible. No support given it such case. Please understand.
Compatibility list:
Kernel have been tested with official and beta Oxygen Os
And Finaly Download Link:
WHITE WOLF KERNEL - https://www.androidfilehost.com/?w=files&flid=233922
WHITE WOLF OS ROM - https://www.androidfilehost.com/?w=files&flid=280710
Source
https://github.com/yarpiin/White-Wolf-OP3-OXY.git
If You like my work buy me a beer https://www.paypal.me/yarpiin
XDA:DevDB Information
White Wolf Rom and Kernel Oxygen Os, Kernel for the OnePlus 3
Contributors
yarpiin
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: WHITE.WOLF.OP3.OXY.O
Stable Release Date: 2017-11-07
Created 2017-05-30
Last Updated 2018-11-30
Reserved
WHITE.WOLF.OP3.OXY - changelog:
https://github.com/yarpiin/White-Wolf-OP3-OXY/blob/master/changelog.txt
Hall Of Fame
This is a list of people who contributed donations to this project or helped in it
Helpers
- @urgali
- @Sungfive
- @Duncan1982
- @Cybertron™
Donators
- @urgali
- @A Sad Napkin
- @real76
- Unknown memeber named Amir
- @ctakah27
Thank you a lot !!!
Signature Image
And another kernel for OP3! Nice! ?
@yarpiin can I flash this on Phoenix rom v4.2 ?
sushobith said:
@yarpiin can I flash this on Phoenix rom v4.2 ?
Click to expand...
Click to collapse
This kernel version is for Oxygen Os , my Lineage based kernel should work on AOSP but wont take any responsibility for any problems
Sent from my OnePlus3 using XDA Labs
yarpiin said:
This kernel version is for Oxygen Os , my Lineage based kernel should work on AOSP but wont take any responsibility for any problems
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Trying this out. [emoji481]
Sent from my ONEPLUS A3003 using Tapatalk
great kernel:good:
Running on latest open beta. All good and smooth. Thank you.
Hi all,
Up to date kernel is up!!
Enjoy
Hi.. Thanks for the wonderful kernel. What configuration do you use?
mokshadenied said:
Hi.. Thanks for the wonderful kernel. What configuration do you use?
Click to expand...
Click to collapse
Im 9n AOSPA rom not oxygen but if you want you can use alucard or nightmare on small cluster and despair on big one underclock slightly and fiops as iosched rest as you wish
Sent from my OnePlus3 using XDA Labs
yarpiin said:
Im 9n AOSPA rom not oxygen but if you want you can use alucard or nightmare on small cluster and despair on big one underclock slightly and fiops as iosched rest as you wish
Click to expand...
Click to collapse
Ok i was using Alucard on both the clusters and CFQ as io scheduler.was butter smooth. will try this combination. Also i used ur kernel before u quit from OOS development. Then u had Alucard hotplug. Any plans of adding again? Another query from what i read CFQ is better for multitasking compared to fiops and fiops has read write issues?
mokshadenied said:
Ok i was using Alucard on both the clusters and CFQ as io scheduler.was butter smooth. will try this combination. Also i used ur kernel before u quit from OOS development. Then u had Alucard hotplug. Any plans of adding again? Another query from what i read CFQ is better for multitasking compared to fiops and fiops has read write issues?
Click to expand...
Click to collapse
There will be no hotplug driver in this kernel as our cpu doesnt hotplug from its nature and noticed that there was no benefits from hotplugging,
FIOPS combined with 2048mb read ahead is best for overal performance ( daily useage , average multitask and stuff like that ) sometimes it can lag but personaly never lagged fo me
Sent from my OnePlus3 using XDA Labs
yarpiin said:
There will be no hotplug driver in this kernel as our cpu doesnt hotplug from its nature and noticed that there was no benefits from hotplugging,
FIOPS combined with 2048mb read ahead is best for overal performance ( daily useage , average multitask and stuff like that ) sometimes it can lag but personaly never lagged fo me
Click to expand...
Click to collapse
Ok..so should I change from 512 to 2048?
Another thing- in blu_spark kernel's governor there is a mode called Fastlane.. enabling and setting values would result in the UX being fluid etc. I experienced kind of better fluidity with both cores on Alucard governor. Does Alucard have something similar to Fastlane incorporated?
Hi All,
I had to add small fix to OXY kernel .
I have re uploaded it version remains unchanged
enjoy
Which governor is better?
kevin_652 said:
Which governor is better?
Click to expand...
Click to collapse
its up to you and personal settings i preffer alucard and nightmare
Sent from my OnePlus3 using XDA Labs
yarpiin said:
its up to you and personal settings i preffer alucard and nightmare
Click to expand...
Click to collapse
Can you implement zzzmove Governor?
kevin_652 said:
Can you implement zzzmove Governor?
Click to expand...
Click to collapse
I can , but for now i prefer kernel as it is.
Sent from my OnePlus3 using XDA Labs
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquaKernel over the kernel that came with your ROM!!)
Toolchain:
UBERTC 4.9 Toolchain
CPU:
- governors:
elementalx
interactive
ondemand
zzmoove
ondemandplus
conservative
powersave
userspace
- input boost
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
siopilus
zen
vr
fifo
Thermal:
- msm thermal
GPU:
- Adrenoboost
More:
- init.d support
- insecure kernel (adb has root privileges)
- frandom
- PVS level info
- frandom
- notification led control
- kcal v2
- CRC Check Disabled
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Supported Variants:
H830
H850
Download Link CrazyAquaKernel [H830] [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=208625
Download Link CrazyAquaKernel [H850] [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=208622
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquaKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Faux123
thx Savoca
thx RenderBroken
thx flar2
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the LG G5
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-g5-g6-los-nougat
Kernel Special Features:
Version Information
Status: Testing
Created 2017-08-20
Last Updated 2017-08-20
FAQ
Recommended app : Kernel Adiutor
changelogs
v1.0/20-08-17
- initial release
v2.0/8-9-17
- input boost
- frandom
- msm thermal
- many improvments under the hood
For users and devs!!
All my kernels are based on cyanogenmod/lineageos source ,if someone who believes" i stoled their source" i have video captures and anyone who believes something just report me and i will have the last laugh .every tweak/mod/feature i used i edited/tweaked on my own and anyone with problem just stay away. My sources are free for anyone and can be used(i saw some ppl use them already)i don't care like other devs and i am happy and proud if someone use my work(the words" i work many hours on that project" the best repeatable words(many devs without the recognized tag and not with many thanks,they have worked for many hours/days/months and they don't cry and fight other devs )if for some devs their source are so much rare and hardworked just keep them privet(their work include their name so no problem ...we are not here for the fame ...we just want to improve the devices to make them better and not to fight with each other...
Why i am telling you all these?!
I have had many kernels unreleased from fights...i will continue to new clean projects based on lineageos and i will not care much with my source to wait many days to upload them with all the history of them because 2-3 "devs" they believe i used or edited their source...i am not a popular dev but you can't believe and no one knows how many days without sleep and hours of hardwork i have done, to do all this(and many not release source/work, much more than other devs...
reserve1
reserve2
Well.. This is awesome. Thank you for the hard work..really!!!
drmilosh said:
Well.. This is awesome. Thank you for the hard work..really!!!
Click to expand...
Click to collapse
This is just the start m8,i tried all the day to fix them all thats why i added only a few features to find the problem^^
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
This is just the start m8,i tried all the day to fix them all thats why i added only a few features to find the problem^^
Click to expand...
Click to collapse
Good news then, thx ! Will start testing soon (on linage os)..
drmilosh said:
Good news then, thx ! Will start testing soon (on linage os)..
Click to expand...
Click to collapse
Cool m8^^
Sent from my iPhone using Tapatalk Pro
Will be testing tomorrow!
Kye2000 said:
Will be testing tomorrow!
Click to expand...
Click to collapse
Cool,thx m8
Sent from my iPhone using Tapatalk Pro
Thanks for this :good:
Does your kernel have quickcharge support?
Nimueh said:
Thanks for this :good:
Does your kernel have quickcharge support?
Click to expand...
Click to collapse
In the first build no m8,but soon i will try to add it
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
In the first build no m8,but soon i will try to add it
Click to expand...
Click to collapse
Is video recording fully functional ?
N1ko5zAN said:
Is video recording fully functional ?
Click to expand...
Click to collapse
I hope yeh coz is fully updated
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
I hope yeh coz is fully updated
Click to expand...
Click to collapse
Ok ... Will test today and report back !!!
N1ko5zAN said:
Ok ... Will test today and report back !!!
Click to expand...
Click to collapse
Cool,thx m8
Sent from my iPhone using Tapatalk Pro
Thank you very much @CrazyGamerGR :highfive:
Kernel runs good so far on H850 RR 5.8.4 unofficial with one exception:
Interactive is set as the default governor.
-> Since EAS is there for the LG G5 interactive governor is always at 100% CPU frequency and therefore less useful for most of us...
Please check this post in the Speedy Kernel thread: either EAS or hmp should be enabled in the kernel, not both as this causes these malfunctions in some governors, i.e. interactive.
Keep up your good work, really appreciate! :good:
tiis said:
Thank you very much @CrazyGamerGR :highfive:
Kernel runs good so far on H850 RR 5.8.4 unofficial with one exception:
Interactive is set as the default governor.
-> Since EAS is there for the LG G5 interactive governor is always at 100% CPU frequency and therefore less useful for most of us...
Please check this post in the Speedy Kernel thread: either EAS or hmp should be enabled in the kernel, not both as this causes these malfunctions in some governors, i.e. interactive.
Keep up your good work, really appreciate! :good:
Click to expand...
Click to collapse
Yeh i ll check it,thx for feedback m8
Sent from my iPhone using Tapatalk Pro
New update is up
v2.0/8-9-17
- input boost
- frandom
- msm thermal
- many improvments under the hood
Download Links:
H830: https://www.androidfilehost.com/?fid=889764386195928217
H850: https://www.androidfilehost.com/?fid=817550096634797923
CPU Governors
Alucard
Darkness
Nightmare
Blu_active
interactive
bioshock
impulse
interactiveX
etc
IO Schedulers
Fiops
Cfq
Bfq
Maple
Zen_interactive
Deadline
TCP
Westwood
Reno
Bic
Cubic
Htcp
Illinios
Misc
compiled with clang 5 compiler
cpu voltage control
KCAL color control
DT2W (disabled by default)
S2W (disabled by default)
Force usb fast charge
Fsync on/off switch
Adreno Boost (disabled by default)
Nethunter and HID patches
wireguard support
faux sound control
Qnovo charging optimization
"experimental" quick charge 2.0 from old @nichcream source
CPU/GPU Frequencies changes by @difrDownload: https://forum.xda-developers.com/devdb/project/dl/?id=28338
Alternate download: https://github.com/DyWN/android_kernel_xiaomi_msm8937/releases
Credits:
Special Thanks to @riteshsaxena and Team Reloaded for kernel source
Svoca
Difr
Nichcream
Engstk
Bawaviki
faux123
[email protected]
Billchen1977
and everyone who's code I'm activily stea.... I mean cherry-picking :angel:
XDA:DevDB Information
Spicy kernel, Kernel for the Xiaomi Redmi 3S
Contributors
DyWN
Source Code: https://github.com/DyWN/android_kernel_xiaomi_msm8937
Kernel Special Features:
Version Information
Status: Testing
Current Stable Version: coming soon
Created 2017-12-31
Last Updated 2018-05-06
benchmark
feels great to beat snapdragon 810 based device with budget phone :laugh:
12/02/2018-switch to clang 6.0
-enable Z-RAM
-upstream to 3.18.94
-gpu oc to 600Mhz (based on LH kernel https://forum.xda-developers.com/xiaomi-redmi-4x/development/kernel8-1-0-lh-kernel-oreo-t3738247)
-cpu oc to 1,5 and 1,3 Ghz (also based on LH)
28/01/2018-Sweep2wake from @nichcream source
-interactiveX governor
-impulse
-updated blu_active
20/01/2018-switch to clang 5 compiler
-updated lz4 compression to 1.7
14/01/2018-fixed bad cherry-pick causing newer roms to crash entirely
13/01/2018-enable core control back
-removed other hotplugs (not efficent)
12/01/2018-switch compiler to linaro 7.2.1
-cpu voltage control
-qnovo charging optimization
-QC 2.0 from nichcream's source
-disable core control for custom hotplugs compatibility
-faux sound control
01/01/2018-Double tap to wake (disabled by default- enable with kernel adiutor)
-Nethunter and HID patches
-cpu big core minimal frequency decreased to 768MHz
To Do:
Edit dt2w and s2w to match flar2 wake gestures
optimizations!!!
Things I am not able to add :crying: :
-Thunder charge (there's no real implementation of that for qpnp-smbcharger)
Let me know what would you like me to add
Will it work on 8.1 Roms??
Please add wireguard support
abhishekpandey7148 said:
Will it work on 8.1 Roms??
Click to expand...
Click to collapse
Yep
gopal pipil said:
Please add wireguard support
Click to expand...
Click to collapse
Forgot to mention, Its already in
https://github.com/DyWN/android_ker...mmit/e106e2f1245b7d5553722a8e4ce3d6ac0a68d45d
DyWN said:
Forgot to mention, Its already in
https://github.com/DyWN/android_ker...mmit/e106e2f1245b7d5553722a8e4ce3d6ac0a68d45d
Click to expand...
Click to collapse
Download link ??
Where is download link? Is it supporting dual tap to wake?
gopal pipil said:
Download link ??
Click to expand...
Click to collapse
well in download tab
https://forum.xda-developers.com/devdb/project/dl/?id=27927
abhishekpandey7148 said:
Where is download link? Is it supporting dual tap to wake?
Click to expand...
Click to collapse
not yet, will work on it.
DyWN said:
Forgot to mention, Its already in
https://github.com/DyWN/android_ker...mmit/e106e2f1245b7d5553722a8e4ce3d6ac0a68d45d
Click to expand...
Click to collapse
I'm flashing it now, I'll give feedback after using it for day or two
DyWN said:
Yep
Click to expand...
Click to collapse
Also working on aex 5.1 [email protected]
Wireguard is working flawlessly on pixel experience rom. Thanks developer, i only wanted this feature. Except this i prefer interactive governor.
Congratulations @DyWN to be first Oreo custom kernel for our 'land':good:
DyWN said:
Let me know what would you like me to add
Click to expand...
Click to collapse
Add sweep2wake if possible
Congratulations @DyWN and thanks for sharing your work
Regards!
If possible please increase charging current rate. Or option to control charging current just like thunderzap control and qc3.0 support.
Anyone tried on 8.1?
Meer Hossain said:
Anyone tried on 8.1?
Click to expand...
Click to collapse
Yes
How about mac address, is that fixed in this kernel?
Beacon is BACK for Oreo Roms i.e LineageOs,RR(hope coming soon),Nitrogen os,Pixel Xperience etc.Kernel still in beta version(because Oreo is also in Beta).
<---Features--->
Compile with UBERTC 4.9
Omptimised
Cpu governors:-
interactive(default)
performance
ondemand
darkness
lionfish
userspace
powersave
conservative
elemental x
impulse
bioschok
relaxed
zzmoove
Alessa
Hyper
Alucard
Despair
Blu_active
etc
Tcp:-
westwood(defalut)
cubic
vegas
reno
high speed
yeah
scable
illnois
etc
Wake gestures:-
Doubletap2wake
sweep2wake
Misc:-
nethunter support(wireless+hid patch+CD-ROM)
cpu boost
USB fast charge 2.0
vibration leveler
USB FORCE FAST CHARGE
KCAL
Sound controler
Backlight dimmer
Fsync Switch
low brightness
Ondemand(public demand):-
Wireguard VPN support
TTL Target (for Russian users)
Adreno Idler
Kernel samepage merging(KSM)
AIO Hotplug
core_control
Quick Wake
lz4 compression as default
Touch Boost
SafetyNet patch
Boot with selinux permisive mode
*boot with dt2w by default
*boot with usb fast charge by default
*aio and asmp hotplug modified
you tell me.
Credits:- nibaji
rainforce279(for s2w)
TeamMex(for alessa)
Team Hyper
.//hack
svoca(kcal)
LineageOs
flar 2
Shoaib
difr
nichcream
Mukesh Ambani (for jio)
All members of my testing group:-beacon_kernel_3s
All other members of xda
Sorry if i forgot anyone in this list please pm me. I definately gives him proper credits.
Code:
[COLOR="Red"]Disclaimer:-You warrenty is now void.This kernel is in beta stage so i am not responsible for anything.Use this at your own risk.You may hard brick or soft brick your phone.
[/COLOR]
Ask your questions and tell me this kernel in reply section.
For any kind of feature Demand post in our Beacon support and queries in QnA Section.
App for tweaks:-Kernel adiutor
Hit thanks if you like my work:good:
XDA:DevDB Information
Beacon kernel, Kernel for the Xiaomi Redmi 3S
Contributors:-bawaviki
Source code
Donations:-No need just help others who want to be helped.
Q:-Why this thread look similar to nougat thread.
Ans:-Because it has all the feature of nougat kernek and i don't want to waste my time
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2017-09-04
Current Beta Version: 3.5
Beta Release Date: 2017-09-16
Created 2017-09-04
Last Updated 2017-09-06
Reserved for Changelogs:-
PHASE 1
Beacon_first_bake:-
All feature of nougat
+core control
+upstream kernel
Beacon_second_bake:-
+fix Autosmp hotplug
+less laggy
+increases charging current value
Beacon_beta_bake:-
+fix adreo idler
+voltage regulator
+Under Clocked to 422mhz
Beacon_beta_2:-
+add s2w/s2s
+dt2w/s2w works for imagis panel(3x)
+GPU shows correct frequency i.e min 19MHz
+changes in frequency table
Beacon_beta_3:-
+OC CPU(1536/1344MHz)/GPU(600MHz) [@DyWN]
+add Sioplus i/o scheduler
+enable Ecrypfs support(@fxsheep)
+add Gentle_Fair_Sleepers and Arch Power support(@NPriyo)
+Upstream kernel
Beacon_alpha:-
All beta_3 features+OC CPU(1536/1344MHz)/GPU(600MHz) [@DyWN]
Beacon_beta_4:-
+CD-ROM emulator for drivedroid [@fxsheep @shreyas_kulkarni and others]
+Software CRC Toggle[@NPriyo]
+sensor_ind wakelock[@bharathulaganathan]
+msm_hsic_host wakelock
Beacon_beta_4(updated):-
+All features of beta 4,also works on difr's crdroid as well as other ROM (thank to @difr)
PHASE 2
Beacon_beta_4.1:-
+enable faux sound control
+add Boeffla wakelock
+Charging improvements
+Size optimization
+Upstream to 3.18.102
Nice
WooooHooo:laugh:
Thank you very much sir:silly:
Finally :victory:
However I manage to get all features of nougat kernel in Oreo but I am not sure about performance is same or not. If any "tester" feels any kind of lag or freez please reply here.
bawaviki said:
However I manage to get all features of nougat kernel in Oreo but I am not sure about performance is same or not. If any "tester" feels any kind of lag or freez please reply here.
Click to expand...
Click to collapse
I installed it just now.....I will reply u later
just a noob question, how to toggle force usb fast charge? :/
Shubhank0751 said:
just a noob question, how to toggle force usb fast charge? :/
Click to expand...
Click to collapse
It's on by default but you can easily toggle using kernel adiutor's battery section.
After reboot it turns into stock settings.
There is too much lags
On pixel experience rom
I want to try on nethunter. I will inform asap. Good job bro
Sent from my land using XDA Labs
Somebody test it on some Hyper rom so I know if I should start mad copying from this source
Everything working awesome! Im on aex 5.1 unofficial
Its too lagy
Today a new built is released with less lag and improved other parameters.
guys those who have faced laggy and issues, please provide at least in which ROM and what issues in brief detail (and better with logcat(not mandatory but giving it is more good for devs)) so that both devs and readers dont face trouble and readers ask same questions every time and fill the thread...
thanks...
@bawaviki :good: for your great work...
bawaviki said:
Today a new built is released with less lag and improved other parameters.
Click to expand...
Click to collapse
Today? You mean yesterday? The link is still yesterday
Sent from my land using XDA Labs
---------- Post added at 06:14 AM ---------- Previous post was at 06:10 AM ----------
Is there anyone has link nethunter nougat for redmi 3s prime?
Sent from my land using XDA Labs
As i announced new build is released with some performance fixes. Full changelogs are in 3rd post check and tell me your feelings about this built.
Is new build up?
If then change log plz
Meer Hossain said:
Is new build up?
If then change log plz
Click to expand...
Click to collapse
check the 3rd post
This is my first work as a dev. Presenting Thunder kernel for Redmi 3s/3x/Prime(Oreo). Thunder Kernel has been tested on Pixel Experience Rom. It feels stable and smooth, no lag issue found in this kernel. The source still is in beta stage so the kernel also is in beta.
Feature List:
CPU Governors
Alucard
Darkness
Nightmare
Blu_active
interactive
bioshock
lionfish
ondemand
performance
etc.
TCP
Westwood
Reno
Cubic
Veno
IO Schedulers
noop
deadline
cfq
bfq
maple
fiops
Misc
KCAL color control
DT2W
AutoSMP Hotplug (disable)
Force USB fast charge
Fsync Switch
Low brightness
Nethunter and HID patches
wireguard support
lz4 compression as default
CPU/GPU Frequencies changes by @difr
Touch Boost
Optimized for faster operation.
Toolchain: 7.0.x-sabermod(experimental)
Download: [url]https://github.com/AyonSarkar1996/android_kernel_xiaomi_msm8937/releases[/URL]
Backup your kernel before flash it.
Credits :
@riteshsaxena
Team Reloaded
Svoca
Difr
Nichcream
franciscofranco
Engstk
Bawaviki
XDA members
Special Thanks to @DyWN
If I missed something, please tell me
If you like my work, don't forget to hit like.:good:
XDA:DevDB Information
Thunder Kernel for Redmi 3s/3x/Prime, Kernel for the Xiaomi Redmi 3S
Contributors
Ani96
Source Code: [url]https://github.com/DyWN/android_kernel_xiaomi_msm8937[/URL]
Kernel Special Features: UnderClock-OverClock., DT2W,KCAL
Version Information
Status: Beta
Current Stable Version: 1.1
Stable Release Date: 2018-01-06
Current Beta Version: 1.0
Beta Release Date: 2018-01-03
Created 2018-01-07
Last Updated 2018-01-07
Reserved
Recommended Kernel Settings: ( Kernel Adiutor)
Cpu min freq: 768MHz,345MHz
CPU Gov: blu_active
Thermal: Core Control
GPU: Max 400MHz
GPU Gov: Default
Wake: If you don't use DT2W, then disable it.
I/O: noop
Reserved(Changelog)
Coming soon......
Link?
NickDios-5 said:
Link?
Click to expand...
Click to collapse
up:good:
Great job! Keep it up
impulsar said:
Great job! Keep it up
Click to expand...
Click to collapse
Thanks :good:
Good work mate :highfive:
is DT2W work on redmi 3x?
Sent from my Redmi 3X using Tapatalk
Falke999 said:
is DT2W work on redmi 3x?
Click to expand...
Click to collapse
I tested it on 3s prime and perfectly working . Plz test it and give feedback. :good:
Ani96 said:
I tested it on 3s prime and perfectly working . Plz test it and give feedback. :good:
Click to expand...
Click to collapse
+1
Hey how do i overclock cpu+gpu by my hand???
Any idea???
I don't know how i do this?
Nurujjamanpollob said:
Hey how do i overclock cpu+gpu by my hand???
Any idea???
I don't know how i do this?
Click to expand...
Click to collapse
It's already overclocked to 1500MHz. and base frequency underclocked to 345MHz.
Ani96 said:
It's already overclocked to 1500MHz. and base frequency underclocked to 345MHz.
Click to expand...
Click to collapse
Oh but i think i can able to do it by my hand
Nurujjamanpollob said:
Oh but i think i can able to do it by my hand
Click to expand...
Click to collapse
You can change cpu frequency by kernel adiutor cpu settings .
Can you port CPU Voltage table form snap 410 ?
https://forum.xda-developers.com/le.../kernel-theragingbeast-kernel-lenovo-t3686018
meng-xi said:
Can you port CPU Voltage table form snap 410 ?
https://forum.xda-developers.com/le.../kernel-theragingbeast-kernel-lenovo-t3686018
Click to expand...
Click to collapse
Let me try
But generally snap 430 is more energy efficient than 410 . Already I am working on voltage twerk
DT2W not working in redmi 3x, rom AEX 5.1 RELOADED
Can you please add TTL targer support?
mrbuyanto said:
Can you please add TTL targer support?
Click to expand...
Click to collapse
Wait for next build plz.