Flashed 32.3.A.0.376, Androplus, Can't access TWRP - Xperia Z5 Q&A, Help & Troubleshooting

Hey everyone,
I have an E6653 that I previously unlocked the bootloader and flashed AndroPlus and TWRP to with Marshmallow. I flashed the Nougat ROM to my phone and then flashed the new AndroPlus kernel and TWRP, but I can't seem to access TWRP. The notification LED no longer flashes light blue during the boot process, and volume down doesn't work to enter TWRP. Am I missing something here?
I downloaded TWRP from AndroPlus's GDrive folder for my phone, just as I did previously on Marshmallow.

the key sequence slightly changed.
Press and hold power + vol down key at the same time with phone off.
(and not power first and vol down later as before)

Related

[Q] Can't boot into recovery?

So, I got my new OnePlus One today and I tried to get CM12 onto it. I was following the [GUIDE] How to Install CM12 on the OnePlus One- Android Lollipop/5.0 on the OPO forums, and everything went well until I tried to get the TWRP on there. I flashed the recovery and rebooted the phone. I turned it off and then tried to boot it into recovery but it doesn't, it just hangs at the OPO logo until I hard-restart it.
I've tried factory resetting it and doing
fastboot oem unlock
but nothing happened. The factory reset pretty much just reset the phone. I think I might've messed up the kernel. How do I fix it?
EDIT 1: I've tried reflashing twrp recoveries and nothing. When I hold power+volume down, it powers on, shows the one plus logo, then reboots and just goes to the lockscreen.
UPDATE 1: I managed to manually flash all the CM12 files and use lollipop. I haven't tried the recovery yet but I'll keep you guys updated (if any of you even care).
UPDATE 2: Apparently flashing CM12 made the recovery work. Everything works as it should and the OTA to the most recent CM12 worked perfectly.
You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.
Heisenberg said:
You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.
Click to expand...
Click to collapse
I was curios and enabled advanced reboot to try and boot into recovery and it worked (after I had flashed CM12). Everything's working now.
SDCore said:
UPDATE 1: I managed to manually flash all the CM12 files and use lollipop. I haven't tried the recovery yet but I'll keep you guys updated (if any of you even care).
Click to expand...
Click to collapse
How did you manually flash CM12? I think I'm having the same trouble you were having. I used the oneplus toolbox from the forum to unlock the bootloader, then flash the TWRP, but no luck in getting into recovery mode. It just boot loops with the oneplus logo until I release the volume down button at which point it then boots to the lock screen.
Heisenberg said:
You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.
Click to expand...
Click to collapse
@Heisenberg I'm also having trouble getting into recovery. I've tried the different button combos (power + vol down; power + vol down and release power) as well as the advance reboot options to get into recovery, but they all fail. I get the 1+ logo and after I let go of the volume down button the screen goes black and boots again to the 1+ screen and then to the lockscreen. It's almost like it doesn't recognize the recovery. I tried putting the stock recovery back on using the image in the OnePlus One toolkit folder, but that one doesn't work either. In addition to unchecking the "CM Recovery Update", are there any other settings that could be causing problems?
For background info, I initially used the toolkit interface to unlock the bootloader and then flash the recovery. The bootloader unlocked with no issue...it wiped my device and I was in sync with the "How to root" video posted by alex.inthi. I got sidetracked after the (seemingly) successful flash of TWRP onto the phone I kept getting booted into the Cyanogen recovery. I realized out that I needed to uncheck the setting to keep it from overwriting TWRP and after that was not able to boot into recovery. After finding your beginners guide (thanks, by the way, very well written) I tried using fastboot from the command line as you show, but still no luck.
Thanks in advance for any help...
bellino13 said:
I used the oneplus toolbox from the forum to unlock the bootloader, then flash the TWRP, but no luck in getting into recovery mode. It just boot loops with the oneplus logo until I release the volume down button at which point it then boots to the lock screen.
Click to expand...
Click to collapse
bellino13 said:
@Heisenberg I'm also having trouble getting into recovery. I've tried the different button combos (power + vol down; power + vol down and release power) as well as the advance reboot options to get into recovery, but they all fail. I get the 1+ logo and after I let go of the volume down button the screen goes black and boots again to the 1+ screen and then to the lockscreen. It's almost like it doesn't recognize the recovery. I tried putting the stock recovery back on using the image in the OnePlus One toolkit folder, but that one doesn't work either. In addition to unchecking the "CM Recovery Update", are there any other settings that could be causing problems?
For background info, I initially used the toolkit interface to unlock the bootloader and then flash the recovery. The bootloader unlocked with no issue...it wiped my device and I was in sync with the "How to root" video posted by alex.inthi. I got sidetracked after the (seemingly) successful flash of TWRP onto the phone I kept getting booted into the Cyanogen recovery. I realized out that I needed to uncheck the setting to keep it from overwriting TWRP and after that was not able to boot into recovery. After finding your beginners guide (thanks, by the way, very well written) I tried using fastboot from the command line as you show, but still no luck.
Click to expand...
Click to collapse
Okay, I must have been having a special kind of moment - I've got TWRP 2.8.7.0 running on my handset now. I may have been holding the volume down button too long, or it may be that I was using an older version of TWRP, but I'm going to go with the former. I've also been able to successfully flash and boot into Philz 6.59.2
Having the same problem
I am having the exact same problem and cannot seem to find a solution. Recovery screen just doesn't appear, but goes to lockscreen.
Tried erasing, flashing both twrp, philz etc., but nothing works. The phone doesn't recognize the recovery status. Advanced booting does the same.
Update CM-recovery is checked off, phone is unlocked. I've followed every step of the big guide down to every detail.
Is manually flashing the 12.1 ROM the only way and in that case: is it hard for a relative newcomer?

P8 Lite - Custom TWRP only loads once after flash?

Hey guys, just flashed a custom recocery to my P8 Lite device,
http://forum.xda-developers.com/p8lite/development/testing-twrp-2-8-7-x-huawei-p8lite-qcom-t3187758
I have flashed this file using ADB fastboot - fastboot flash recovery folder/image.img
all went well, rebooted and booting into the custom recovery all fine, but when rebooting, and trying to enter recovery again using the POWER BUTTON + VOL UP buttons, it loads the stock recovery. It seems the only way I can get into the custom recovery again is using
adb reboot recovery
Is this normal? Is there a way I can ALWAYS enter the custom recovery using the phone buttons and without the need for a PC?
Thanks
Ok so weird I figured it out, everywhere it says press the POWER + VOL up keys to enter recovery. But for me (and I dont know why) its press the POWER and hold down VOL UP + VOL DOWN keys. Gets me into the KIRIN custom TWRP recovery
I do however have another question, Do I need to flash specific custom recovery images for the phone? Or can I flash any custom TWRP recovery images?
Thanks!

Honor 8 can't boot up to TWRP recovery lost my root access

Hi i own an honor 8 FRD-L09 and it's rooted , so the other day i updated the EMUI from 4.1 to 5.0 and my xposed installer said frame work is not intsllad and then i checked my supper su and it said my phone was not rooted and that this point i was what!!
so tried to boot up to the TWRP recovey and gusses what i cant and frist it showed my the the phone recovey options not the custom TWRP that i installed before. i flased The TWRP Recovey in to my phone and wrote the commoade [adb reboot recovery] so it would boot the TWRP That i just flashed but gets stuck on your devie is booting now for 20 min!!! so i thought and this moment hey what not factory rest your phone and everthing mabye the then i can re root my phone but once agian it got stuck on the same screen as when i tried boot TWRP [ YOUR DEVICE IS BOOTING NOW] So a this point i gave up and i wonder did this happedn to you guys who updated ther honor 8 and can you re root you phone again?
oh P.S when i hold the power and volume down buttom my phone turns on when i hold the power and volume up buttom for tre sec it goes to the honor 8 revory mode not the twrp and its saying download the new version of the recovey and its fails evey time and when hold the power and the volume buttom simultaneously i think it't trying to boot the TWRP recovey but it get's stuck on you deviec is booting now screen.
and soryy for my english the my frist languages
i too faced the same problem. some one please help
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Mine won't boot to TWRP and when I use the EMUI boot screen its saying it can't connect to Huawei erecovery servers. So I can't even wipe the root at this point. Any ideas?
Many Thanks!
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Well this worked for me, after a day of googling. the twrp-3.1.1-1-frd.img worked, it may have been following the instructions about "fastboot reboot, while holding the volume up.
hey guys.. having the same issue..
I have DUK-L09C432B183 bootloader unlocked and phone u locked..
I downloaded twrp and side loaded with adb/fastboot
but when I reboot (fastboot reboot) it doesn't enter twrp recovery but emui recovery menu.. any suggestions?
(I tried fastboot reboot whole holding volume down.. didn't work)
ok [EDIT] i could finally get TWRP installed .. i backup everything on external SD
then i flashed MAGISK.zip (v14) and from there phone will show HONOR and jsut now it booted into HUAWEI Erecovery and gives me 2 options "factory data reset "Q or Download latest version and recovery !
any suggestions how i can ROOT it ? should i keep on try with MAGISK or ? thank you guys !
SECOND EDIT
so i did FACTORY data reset.. then i ADB side loaded twrp emmc .. then i installed magisk 13.3 .. rebooted and everythign goodf ! i've twrp and device is rooted !!
all good
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Thank you so much for linking to that image file! I was looking on the internet for days!
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Hi,
If I used the official TRWP 3.1.1 first and it didn't work, can I just go ahead and flash the TWRP using the modified twrp.img at the above link to see if that works?

Not getting into recovery

I'm not able to get into recovery.
After doing something stupid on my phone, i wanted to flash a new rom (crDroid). But the recovery gave an error 7. So i wanted to flash the recovery from the thread. I wasn't near a pc so i downloaded an app called Rashr to flash the recovery.img. But then my phone wouldn't boot or get into recovery.
So i used the official flashtool from sony to flash the official software to reset my phone and now my phone works again, but i still wanted crDroid. I downloaded a permissive kernel from zach and installed it through fastboot. I also installed the recovery through fastboot but when i booted, no yellow light came up and holding the volume up button wouldn't work as well.
Any suggestions?
Edit: Also fastboot boot recovery.img results in the phone being stuck at the sony logo
When you have recovery installed in FOTA partition, you can enter it by holding VOL DOWN + Power button while the phone is off.
The way you described only applies when recovery is installed in boot partition.
serenize said:
When you have recovery installed in FOTA partition, you can enter it by holding VOL DOWN + Power button while the phone is off.
The way you described only applies when recovery is installed in boot partition.
Click to expand...
Click to collapse
This only works with 100% reliability after flashing at least .160 Nougat firmware via FTF (XperiFirm),
then flashing twrp/recovery via
Code:
fastboot flash recovery recovery.img
and the behavior varies from country to country (or even firmware to firmware, among network operators / giving the name "custom firmware" credit :silly.
This time [2nd flash of .160 firmware, different operator] the notification led lights up violet for me, previously it was something else (a form of red, orange) and recovery almost instantly booted up,
now it takes several seconds - if not 30 seconds until it's in TWRP.
Okay so i'm on 34.4.A.0.160. I flashed some different recovery images by now but still no change in the situation. I did al the recovery flashing using the 'fastboot flash recovery recovery.img' code and fastboot gave no errors and it looked like it works everytime. But when i boot there is no led light during the entire boot sequence.
Also booting to recovery with volume down + power button when phone is off, didn't work. It just boots normal. I tried it serveral times and every time i changed some things, like pressing the volume button or power button for a longer time. Also once again, here no led indicators appear....
My led light is not broken as it still lights up when i get a message.
I installed a old lolipop firmware through flashtool, installed the Androplus permissive kernel and recovery, also from Androplus, through fastboot. Now when the phone boots it gets a yellow led indicator. When pressing volume up during the indicator, the light turn orange but the phone does not boot into recovery, but instead reboot itself.
Once again, no idea what is happening. Fastboot is working fine or i would not be able to flash the permissive kernel and get a yellow led light. But why won't my phone boot to recovery? I tried multiple different variants of twrp by different people. Tried multiple firmwares. I think there is something wrong with the partition where the recovery is stored. Is this possible? And if so, how would i fix it?
*i think it is against the rules, but here is a BUMP*
No one any idea ? I can't flash anything without recovery
Same here
I had a similar experience. What worked for me was
"fastboot erase recovery" before fastboot flash recovery etc.
Might work.
Wow - folks there you have your answer - but no one seems to care or read it:
serenize said:
When you have recovery installed in FOTA partition, you can enter it by holding VOL DOWN + Power button while the phone is off.
The way you described only applies when recovery is installed in boot partition.
Click to expand...
Click to collapse
well, I flash twrp to the recovery partition (FOTA huh ?)
Code:
fastboot flash recovery twrp.img
after both steps were [OK]
you can disconnect the cable (= phone off)
Now press VOL DOWN + POWER at the same time,
wait for the Sony logo/screen to appear,
wait 1-3 seconds and release the POWER button - keep the VOL DOWN button pressed [probably can release ALL but still ...]
the phone should boot into TWRP/recovery after quite some time
Just boot the recovery:
$ fastboot boot twrp.img

Magisk rooting issue - Recovery erases itself

Hi,
I've recently gone to rooting my Note 10, I've managed to get the bootloader unlocked. I've followed the rooting instructions with Magisk via flashing with ODIN and then doing a factory reset in recovery.
Basically, whenever ODIN is done, and I try to enter recovery for the first time, it just displays 'erasing' for a second, the phone reboots, and root and magisk don't seem to work. I'm fairly sure I followed instructions to the T. Any idea what could be causing the issue? My phone is the 970F variant. I'm using the latest (android 10) firmware with Magisk and then flashing the processed file.
Thanks!
You should keep holding volume up and power. Don't release any of button when flashing is done and phone is reboot.
Best way is to disable auto reboot in Odin and when modified firmware is flashed, simply reboot by holding vol down and power key together.
As soon as screen goes black. Relase vol down and press vol up and power key. Let the erasing do, don't release buttons at any stage. You will get into recovery.

Categories

Resources