Hello everyone!
This guide is to solve the otg not-working in Iuni I1 with cyanogenmod rom running Android L. Since the stock firmware does support the otg function (according to all the reviews I saw on internet) but doesn´t work properly under this rom, after some several attempts, I made it work and gonna share this with you all.
Requirements:
·Iuni I1 with cwm rom running Android L
·Root permissions (if you bought the phone with the cwm already installed, you don´t need to do anything. It´s already rooted)
·OTG cable
·Pen drive
·The following apps:
-USB host check (available at Play Store)
-USB otg helper (available at Play Store)
-any file manager that can manage root permissions and access
Steps:
1-download the apps before mentioned. All of them (including the file manager. I prefer X-plore manager since it is very friendly)
2-Run USB host check. It should give you ok on the first and third item. Click "check". After that, click "fix". Reboot
3-Run USB otg helper. Plug the otg cable with any pen drive you have plugged to it. Click "mount"
4-Open the file manager you downloaded and open the following path: //storage/usbotgdrives
5-Start enjoying your pen drive in your Iuni I1. When you are done, go back to USB otg helper and click "unmount". Well done!
Notes:
Since I made it once and with no printing, its the reason I didn´t attach any pics of reference, but following this guide you will be just fine.
The storage tab in Settings does not support the mount and unmount commands for the pen drives you may use,so don´t bother going there trying to activate it. It´s worthless.
Not only now supports pen drive, but also any usb wired device, at least I tried a keyboard and some speakers with usb plug and both worked just perfectly. Didn´t try with an external hard disk but will try this in the following days, I guess there won´t be any trouble.
There is NO RISK at all doing this.
I suggest you to make a shortcut to the path via your file manager to handle it better.
Hi Gusget,
Do you have a cyanogenmod Rom on your Iuni I1 ?
Very interesting, do you have a link to this rom please ?
I would like to test it.
Regards
Greg
Hello. No, actually its just the cyanogenmod rom that can be found on 4pda. Let me search it for you (I just woke up and am dizzy yet)
Hello Gusget,
Thank you for this info.
I translated the Ry09iu MIUI V7 ROM in french for the IUNI I1 because no way to find others european ROMS for this phone.
So when i read your message, i was surprised to know that an european ROM exist for this phone.
I have small bugs but cannot solve them as i'm not an android developer
If you want to test, the links to the rom are :
http://212.129.45.59/downloads/greg/i1_0811_en_stable.zip
http://212.129.45.59/downloads/greg/i1_0811_fr_stable.zip
Best Regards
Greg
Related
Hi all,
the Acer 510 contains the Stockrom, which is rooted and CWM is installed. If I connect the the Tablet via USB with W7, I can see the internal and external SD-Card. If I connect the same tablet under Linux (Suse 11.4), the tablet / filesystem is unknow and could not be mounted
Normaly I see every Android Device under Linux and can mount this one without any problems , so that I 've an access to the SD-Cards.
Does someone has seen the same issue and hopefully has a solution for this one?
Since ICS the protocol used is MTP and linux is not familiar whith it
take a look at this article, it will help you even if it's written fo ubuntu
http://www.omgubuntu.co.uk/2011/12/how-to-connect-your-android-ice-cream-sandwich-phone-to-ubuntu-for-file-access/
Wesie said:
Normaly I see every Android Device under Linux and can mount this one without any problems , so that I 've an access to the SD-Cards.
Does someone has seen the same issue and hopefully has a solution for this one?
Click to expand...
Click to collapse
Tablet doesn't use Mass Storage mode but MTP which you have to setup on your Linux machine.
Ubuntu tutorial (required packages should also work on other distros)
Alternative (I've never heard about this before TBH)
THX !
I'll try it on evening and let you know
Before you proceed in futher steps, did you try connecting the tablet to the Linux machine with USB debugging off? (Win XP for example, cannot use the A510 as MTP if usb debugging is on.)
Even if you get it to work, don't expect somethign good. The Support for MTP is really bad in most Linux distros. probably because MTP is a Microsoft thing. I got it to work once and all i could do was copy small files in already existing folders. Creating folders or copying large files always resulted in a force unmount.
I agree with you that why I only use FTPserver instead now
Simplest alternative to MTP- QtADB, I know it wasn't updated for over a year but worked for me (various 2.1-4.0 firmwares and hardware)
meldrak said:
I agree with you that why I only use FTPserver instead now
Click to expand...
Click to collapse
wifi file transfer from the play store is another option.
Hello guys,
I was wondering if usb otg works on android one.
But as i tested with cable..it isnt working..
So i installed a 'usb otg checker' app from market.
The test gave me a positive result..that means the phone suppprts usb host mode.
But is disabled in kernel.
So my question is can usb otg mode be enabled WITHOUT rooting and changing kernel.
Cause i dont want to root my phone as am satisfied with the features i am getting and also waiting for official android update.
Plz help me in this topic.. Otg check result attached in attachments.
Thank you.
Hello, I got a samsung galaxy tab 2. I am very new to rotting and all that, i rooted the tablet using this guide and it has worked
droidviews.com/root-samsung-galaxy-tab-2-10-1-wifi-gt-p5110-on-android-4-1-1-jelly-bean-firmware/
I am trying to accomplish two things with it:
One- Getting the OTG to work with it. It didnt work straight away with the adapter and I have had little luck finding a soloution. THe app USB OTG checker says I have the usb otg api, but when i plug in a usb drive it dosent recognise it. I think i may have to install a "Kernal" to fix this but i don'y know how to find one that is compatible and will work. (I am doing this for my mum so she can use a usb drive and i dont want to brick it)
Two- this is the main goal, to get ethernet connectivity on the tablet, i think the otg will have to be fixed first but i am not sure. I cant get it to work and apps that enable the ethernet connectivity like:
google.com/store/apps/details?id=xda.usbhost.test&hl=en
Require some kernal. I have su and busybox installed already.
I have a samsung galaxy tab 2 10.1 GT-P5110 with android version 4.1.1 and kernal version 3.0.31 - 523998
Thank you very much if you can help me
Hi
As far as I can see, OTG support is already present with your tablet.
http://forum.xda-developers.com/showthread.php?t=2152253
The best way to check possibility of USB ethernet is to ask in Q/A section
Sign up on forums and ask in
http://forum.xda-developers.com/galaxy-tab-2/help
Good day !
Hi all, recently I decided to give Nougat a try (again) but till now I still facing this problem: Stickmount doesn't work well with Lineage OS 14.1 7.1.2, when I mount my OTG, under /sdcard/UsbStorage/sda1 when I tap it it just say "Requested file path not found". Is there anyway to mount it properly so that I can get it recognized in other apps? I am using Solid Explorer, even it provides native USB OTG stupport, but other app cannot see the USB OTG and access it. But since Stickmount doesn't work, is there any other solution? It works great on Marshmallow thou. If there's no alternative then I might go back to MM again, because USB OTG is essential for me. I need other apps to be able to access the USB OTG too.
Hello,
I have the 1.10 model of the TL-WN722N plugged in with a standard OTG adapter and it doesn't work.!
I installed Nethunter via the TWRP method by installing the image file in recovery mode, after unlocking the OEM via windows with adb.
I have version 6.0.1 of Android on Nexus 5 and I connect the key with a standard OTG adapter.
Currently I have done a lot of research and I can't figure out how to fix the problem.
I also try to install applications that manage and enable the OTG.
Here are screenshots of the commands I tried and with the version of my Android.
sorry i can't put an external link
The biggest problem is that the modules do not install, I have already tested some kernel and none install the modules so we get the problem cited above.
sorry i can't put an external link
I have spent whole days looking for a solution, looking at forum pages and I don't understand.
I managed to understand that there is a bone for the phone + the kernel and the full kali pack (tell me if I'm wrong).
But I don't know why the modules don't want to install.
The phone works very well in OTG.
I tested with several OTG cables and it works perfectly with a USB key.
I'm on Nexus 5 with original android 6.0.1 in marshmallow and I'm trying to connect a TL-WN722N 1.10 to the phone.
In short I hope you can help me because I am surpassing, I am completely neophyte but that fascinates me.
Sorry for the translation, I'm French.
Here is the name to my gitlab issue:
"Problem with my TL-WN722N V 1.10 on Nexus 5 6.0.1 plugged with OTG"
I tested the kernel that I was offered and it doesn't work.
Especially since I can't understand in what order I should install each file and if I should "reboot" between each "install".
Thank you for taking the time to read this block and I hope you can help me.
If any info is missing, tell me.
Thank you
A +
andurilmike
andurilmike said:
Hello,
I have the 1.10 model of the TL-WN722N plugged in with a standard OTG adapter and it doesn't work.!
I installed Nethunter via the TWRP method by installing the image file in recovery mode, after unlocking the OEM via windows with adb.
I have version 6.0.1 of Android on Nexus 5 and I connect the key with a standard OTG adapter.
Currently I have done a lot of research and I can't figure out how to fix the problem.
I also try to install applications that manage and enable the OTG.
Here are screenshots of the commands I tried and with the version of my Android.
sorry i can't put an external link
The biggest problem is that the modules do not install, I have already tested some kernel and none install the modules so we get the problem cited above.
sorry i can't put an external link
I have spent whole days looking for a solution, looking at forum pages and I don't understand.
I managed to understand that there is a bone for the phone + the kernel and the full kali pack (tell me if I'm wrong).
But I don't know why the modules don't want to install.
The phone works very well in OTG.
I tested with several OTG cables and it works perfectly with a USB key.
I'm on Nexus 5 with original android 6.0.1 in marshmallow and I'm trying to connect a TL-WN722N 1.10 to the phone.
In short I hope you can help me because I am surpassing, I am completely neophyte but that fascinates me.
Sorry for the translation, I'm French.
Here is the name to my gitlab issue:
"Problem with my TL-WN722N V 1.10 on Nexus 5 6.0.1 plugged with OTG"
I tested the kernel that I was offered and it doesn't work.
Especially since I can't understand in what order I should install each file and if I should "reboot" between each "install".
Thank you for taking the time to read this block and I hope you can help me.
If any info is missing, tell me.
Thank you
A +
andurilmike
Click to expand...
Click to collapse
You didn't mean the whole time the 6.1 factory image, or did you?
It was to 90 % over the thread of Lineage the talk.
Anyhow, anything which you got linked by the fellow user and me, were apart from the official image from Offensive's site, solely for Lineage meant.
Before I forget, here the newly build chroot, with all the new apps, wallpaper, boot animation from the nightlys:
https://mega.nz/#!9MZ3nAKJ!oQFguK9vltGN5TNjxcfZmQvM2xg3_EzNWTz5roBN-Hk
What do you not understand about the flash procedure in particular?
PS
As re4son wrote does the hammerhead kernel not install any modules.
I don't know what you flashed before though.
What did happen with Lineage+Opengapps+root+installer+kernel(or together, as my previous upload..?
I haven't the best experiences with Lineage, but it depends.
May I ask if you had time to take a look from the rom I linked you at the beginning?
It's the most reliable, although a bit outdated rom named NetHunter OS.
https://gist.github.com/binkybear/8f0f4eee292d5263372f47c3c3edd08e
Post your questions as detailed as possible..so let's wrap it up.
469/5000
A miracle happened there and installing nethunteros-nethunter-hammerhead-cm-14.1-hammerhead and then kalifs-armhf-full.tar.xz for the chroot and it works well.
The only problem is that when I try to install packages:
E: unable to locate kali-linux nethunter package
E: unable to locate kali-linux package
E: unable to locate kali linux-all package
But other than that, everything works.
Victory.
Thank you all for your patience and your advice.
andurilmike said:
469/5000
A miracle happened there and installing nethunteros-nethunter-hammerhead-cm-14.1-hammerhead and then kalifs-armhf-full.tar.xz for the chroot and it works well.
The only problem is that when I try to install packages:
E: unable to locate kali-linux nethunter package
E: unable to locate kali-linux package
E: unable to locate kali linux-all package
But other than that, everything works.
Victory.
Thank you all for your patience and your advice.
Click to expand...
Click to collapse
No need to thank me.. I am glad, that you were able to get it to work finally, after that number of failed attempts..
I went with the NetHunterOS rom version, which I linked you in gitlab
https://build.nethunter.com/nethunt.../LOS-hammerhead-14.1-20170102-nethunteros.zip
SuperSU has already been integrated in this variation as well.
After you flash the obligatory OpenGapps version for the same Android version and architecture 7.1 [arm], you are basically good to go.
I prefer the package size 'pico' - but this goes after your personal liking.
In my experiences is it better to use the "older" kalifs filesizes and not the newer ones with ~ 1,3 GB -- it seems to break somehow the rom/kernel if you use the newer ones
https://build.nethunter.com/kalifs/kalifs-20171118/kalifs-armhf-full.tar.xz
I don't know if you can use the internal wifi chipset, as well as a external adapter for wireless pentesting with the version wich you choose, but this is possible with the one I linked yesterday and again above.
A problem is that
(sudo) apt-get (dist-)upgrade
Click to expand...
Click to collapse
and seemingly further package upgrades are breaking the rom.
Although theoretically should you be able to install stuff.
Did you try it over the terminal, or just the NetHunter.apk?
Best regards l
Thank you.
I use an external wifi antenna, the TL-WN722N v 1.10 in USB OTG.
I tried to install metapackages via nethunter.apk
Nethunter cannot detect a HID interface.
Duckhunter HID does not work.
Thank you
A +
andurilmike said:
Thank you.
I use an external wifi antenna, the TL-WN722N v 1.10 in USB OTG.
I tried to install metapackages via nethunter.apk
Nethunter cannot detect a HID interface.
Duckhunter HID does not work.
Thank you
A +
Click to expand...
Click to collapse
Yeah, I just meant with the mentioned rom/setup, are you able to use the internal Wifi chipset (Broadcom4339) in monitor mode and could forgo the external adapter.
HID should work as well.
No, I cannot use the internal wifi card in monitor mode or the HID device.
I don't understand why?
Thank you