Hi
My Fit device got bricked while I was doing factory reset. It was on some custom ROM. Now it is not going into Recovery mode and not booting into Normal mode. It displays a Blank Screen at boot. The only thing I can do is go into Downloading mode.
But My Windows 10 x64 laptops with USB2 ports are not able to recognize the device properly. I tried various versions of Kies and Kies3 s/w. I also tried Samsung Mobile USB Drivers different versions. I tried installing/uninstalling them in different sequences and rebooting my system in between... But no success.
I Also tried Windows XP SP3 inside virtual machine. But Kies setup fails giving error that it can not connect to internet. Although my connection works fine from inside the VM.
Any help is appreciated.
Thanks in Advance.
Related
Hello, I believe I screwed up something with the mounting/unmounting before I flashed a ROM, and my phone is not working as a result. Originally, it would sit at the Samsung Sidekick 4g Tmobile screen forever, and I could use the button combination to get it into download mode... now that doesn't work, and it only goes to the black screen with the phone and the computer.
I have downloaded driver after driver after driver trying to get this to work, I have downloaded ODIN, and I understand how to use it, but there is no way ODIN is going to see my phone because Windows will not properly install it. I only have a PPC mac and Win 7 computers, one win 7 computer says device is malfunctioning and the other win 7 computer loads it as a "Gadget Serial" but says that it did not install properly. I have tried all the samsung drivers, all the samsung programs to no avail. I've tried more than one USB cable too...
Is there any hope in getting this phone back to life? Do I need to use a windows XP installation? I have VMware so I could try XP or linux but frankly I'm afraid to do anything more for fear of further complicating this situation.
Final Edit: SOLVED. I uninstalled everything save for the samsung drivers, installed the android SDK and plugged it in a different usb port...although im not sure if windows got it right away, ODIN detected it and I was able to restore.
I'm trying to downgrade my friend's baseband to the v21e baseband so he can properly use non-2.3.4 roms. I'm having a problem where XP mode does not recognize me plugging in the phone when trying to initiate download mode. XP Mode will see it fine if the phone it booted up normally, but XP mode sees nothing, so I can't properly install the APX drivers. My actual computer sees it in non-XP mode no problem, though.
I've installed the USB drivers in XP Mode properly, but to no avail. I've been trying to get this going for the past 3 hours now, but nothing. I've got all my files ready to flash the baseband, but my VM is not picking up the phone in download mode. Any help would be greatly appreciated.
i had the same problem
anyone??
tzbigworm said:
I'm trying to downgrade my friend's baseband to the v21e baseband so he can properly use non-2.3.4 roms. I'm having a problem where XP mode does not recognize me plugging in the phone when trying to initiate download mode. XP Mode will see it fine if the phone it booted up normally, but XP mode sees nothing, so I can't properly install the APX drivers. My actual computer sees it in non-XP mode no problem, though.
I've installed the USB drivers in XP Mode properly, but to no avail. I've been trying to get this going for the past 3 hours now, but nothing. I've got all my files ready to flash the baseband, but my VM is not picking up the phone in download mode. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Did you select the phone's usb driver in the XP Mode menu?
i know this is old, but i have gotten this to work a number of times now
you have to select the phone from the USB menu at the top of the window in XP Mode. it drops the phone a couple of times when its pushing the base band to the phone
you may also have to attach the phone using the same menu before you start. i will take a screenshot tonight and post it
also i found it helps to copy the files you need to the XP Mode machine, dont use them through the virtual bridge to your physical drives. just "copy" them to the desktop in XP Mode, works much better that way
Ok so I have an ATT LG G2 (d800) I have CWM touch recovery and yesterday I flashed the latest cm11 update 2-21. After that my phone never got past the CM loading screen.It would load for hours. I tried wiping from recovery and I ended up deleting everything, now all I get is my LG screen. I have no zips on the phone that I can flash. I am still able to get into recovery and into download mode, since I have CWM I think that means I can't flash from an OTG. I know I can push files through adb which I already have setup, however no computer I connect my phone to can see it. It shows up in device manager as Unknown USB Device (Device Descriptor Request Failed). I have downloaded the google adb drivers, the koush drivers, the unnaked drivers, the lg drivers, NOTHING WORKS. On 64 bit computers it tells me make sure the driver is support for 64bit systems, I try the same exact driver on a win 7 32 bit and it tells me to make sure it is for 32 bit computers. I have opened up the phone and left the battery unplugged for 2 hours, that didn't help. I've actually read that people clean the inside of their usb port on the phone and that fixes that, I'm desperate and tried it, did nothing. I have tried on my windows 8.1 x64 (yes i tried disabling signature veri), windows 7 32 bit, and a virtual windows xp 32 bit.
Windows 8.1 doesn't support many devices in fastboot or recovery mode. I had to switch my computer to windows 8 just to use fastboot on an xperia play.
Using a virtual windows xp wouldn't work either. Cuz the device has to be recognized by your main OS first. And after your main OS recognizes the device it will connect it to the virtual machine.
So stick to your Windows 7 for now. Make sure again that you're correctly installing the 32 bit drivers and then try pushing zip files into your phone through adb
As long as your phone can boot into recovery or download mode then it's fixable so don't worry about that.
Sent from my One X+ using XDA Premium 4 mobile app
Since I upgraded my PC to Windows 10, I've been unable to get a connection via USB. I've tried many things following several hours of research/trial and error but not managed to get anything to work. Kies just displays a USB connection error and I get the yellow warning triangle with "USB device not recognised" popping up on connection of the Note to my PC. I do have a Windows 7 Ultimate partition as well as Windows 10 but even that is unsuccessful. I used to have full connectivity with my original Windows 7 Home set up but I don't want to roll back to that, as I do overall love Windows 10.
Anybody had this issue and resolved it?
Many thanks in advance.
Samsung USB Drivers .
JJEgan said:
Samsung USB Drivers .
Click to expand...
Click to collapse
I've done this several times, from different sources, without success. I'm reasonably IT literate but am stumped trying to get this to work on Windows 10.
Anyone else having trouble connecting your phone with your pc?
I've tried different computers with win 10 and one Ubuntu Linux pc with no luck.
The phone starts loading but I get no other options. I've tried different usb ports and different chords.
The computer sees the phone in device manager as "Unknown device".
I have had no luck finding drivers?
When i had this kind of issues tho with another Xiaomi phone mi pc suite did the thing. Hope itll help
Installing this suite triggers the usb driver install, or at least you can install them within it´s menu
I will try, but latest update was 2015