Hi
At the weekend I tried to update my TF300T from CM10.1 to CM10.2. That didn't work as I ended up in a boot loop. Then I thought, maybe I need to flash the latest system blob.
So I did that, only to find that I then couldn't install anything from zip or sd card as the recovery would not mount anything at all. Still got fastboot, so I've tried TWRP 2.6. TWRP 2.5, TWRP 2.4 and CWM, none of them will mount anything at all.
So I find myself with stock ROM, but no way of rooting or installing any custom ROMs.
I'm sure I've made a bloop somewhere, so all suggestions to resolve welcome!
Thanks
Rob
What is your bootloader? Sometimes, if you reflash the same recovery, it *may* work properly the second time around.
I am using TWRP 2.6 with my 127.5 bootloader, just for your knowledge.
aarsyl said:
What is your bootloader? Sometimes, if you reflash the same recovery, it *may* work properly the second time around.
I am using TWRP 2.6 with my 127.5 bootloader, just for your knowledge.
Click to expand...
Click to collapse
That was the tip I needed - I knew I had the right bootloader but I had downloaded the wrong TWRP (I had flashed the JB version instead of the 4.3 version). Doh!
Now flashed CM10.2 and is running Android 4.3. CPU-Z tells me I'm rooted though at the moment I can't get any root apps to work with SuperSU. I'll leave that for another day!
Rob
Hi all,
So after re-installing stock 4.3 via odin, I realised why I hated stock and quickly tried to jump back to CM, however now I can't seem to install any other rom. At any time I can go back to stock via Odin, but I've tried 4 other roms and all of them get stuck in a bootloop. I've wiped / factory reset so many times it hurts, and have tried both CWM and TWRP, both seem to indicate that the install has worked without any problem, yet nothing ever loads.
Any ideas? I don't want to spend the rest of my life with the horror of stock rom!
Thanks.
LucTrask said:
Hi all,
So after re-installing stock 4.3 via odin, I realised why I hated stock and quickly tried to jump back to CM, however now I can't seem to install any other rom. At any time I can go back to stock via Odin, but I've tried 4 other roms and all of them get stuck in a bootloop. I've wiped / factory reset so many times it hurts, and have tried both CWM and TWRP, both seem to indicate that the install has worked without any problem, yet nothing ever loads.
Any ideas? I don't want to spend the rest of my life with the horror of stock rom!
Thanks.
Click to expand...
Click to collapse
If the 4 other roms you tried is of newer version of android, for example, lollipop, you may have to upgrade the bootloader first
How do I go about upgrading the bootloader? I installed cf-autoroot and then both twrp or cwm prior to installing the rom but still no joy. I also tried using Dr. Someones multitool prior to the cf-autoroot. Thanks for the help bud!
I just searched this off the Web, have not tried it myself. Since I don't have your device. So try it at your own risk
http://www.unlock-bootloader.info/mp3-0/samsung-i9305-galaxy-s-iii-5001.html
Sent from my GT-I9500 using XDA Forums Pro.
Hello community,
I was given the device last year and had been fairly satisfied with the performance of it. However, it has gotten laggy over the past couple weeks and a friend suggested to root and flash a rom on it. So, without any prior knowledge, I have been doing some research and browsing through the threads on this forum. I can see that there are guides but was very unsure if the methods would still work because I have noticed that most of them were last updated/edit a while ago. I know I shouldn't use the word 'latest' for doing this to a tablet that is fairly old in the market. However, it would be very helpful if someone can point me to some 'proven to work' or 'trust-worthy' guides of rooting, flashing recovery, and rom.
Also, just out of curiosity, please recommend which recovery and rom a first-timer should use if possible
try these roms.
rocketfans14 said:
Hello community,
I was given the device last year and had been fairly satisfied with the performance of it. However, it has gotten laggy over the past couple weeks and a friend suggested to root and flash a rom on it. So, without any prior knowledge, I have been doing some research and browsing through the threads on this forum. I can see that there are guides but was very unsure if the methods would still work because I have noticed that most of them were last updated/edit a while ago. I know I shouldn't use the word 'latest' for doing this to a tablet that is fairly old in the market. However, it would be very helpful if someone can point me to some 'proven to work' or 'trust-worthy' guides of rooting, flashing recovery, and rom.
Also, just out of curiosity, please recommend which recovery and rom a first-timer should use if possible
Click to expand...
Click to collapse
hello ,
these are the things you need to do before flashing a ROM.
note: -the following things may void your warranty.
-do this on your own risk.
1. HOW TO ROOT
-First install kingo root on your windows PC. Then check USB debugging .
( settings. < about device < touch build number 7times < go back and select developer options < check USB debugging.)
-Open kingo root on the PC and connect your device and connect your device to the PC. Start root and do not remove the USB cable until it says finish.
-Now you have successfully rooted your device.
2.HOW TO INSTALL A CUSTOM RECOVERY
- Go to the following link and download CLOCK WORK MOD(CWM)
LINK: https://www.clockworkmod.com/rommanager
Select your device and install the recovery.
go into the app and install recovery .
3.BACK UP
download rom manager from playstore and do a backup( do a backup using this ap only if you are using CWM recovery.
link for ROM manager: https://play.google.com/store/apps/d...mmanager&hl=en
Now the first thing you need to do is download this rom.
https://www.androidfilehost.com/?fid=95916177934533333
(note: you can flash the rom of p5110 for p5113)
now to flash the rom follow the following steps.
1. Go to recovery mode
2. (have the rom in your sd card)flash it there .
use this link to know how to flash a rom.
https://www.youtube.com/watch?v=tJfPwWjnWGY
now you can reboot after flashing.
to get inbuilt google apps and play store you need to install something called GAPPS (Google apps) download from this link.
http://opengapps.org/?api=5.1&variant=nano
now you flash this zip the same way you flashed the rom.
any problems plz notoce me.
Zte blade l said:
hello ,
these are the things you need to do before flashing a ROM.
note: -the following things may void your warranty.
-do this on your own risk.
1. HOW TO ROOT
-First install kingo root on your windows PC. Then check USB debugging .
( settings. < about device < touch build number 7times < go back and select developer options < check USB debugging.)
-Open kingo root on the PC and connect your device and connect your device to the PC. Start root and do not remove the USB cable until it says finish.
-Now you have successfully rooted your device.
2.HOW TO INSTALL A CUSTOM RECOVERY
- Go to the following link and download CLOCK WORK MOD(CWM)
LINK: https://www.clockworkmod.com/rommanager
Select your device and install the recovery.
go into the app and install recovery .
3.BACK UP
download rom manager from playstore and do a backup( do a backup using this ap only if you are using CWM recovery.
link for ROM manager: https://play.google.com/store/apps/d...mmanager&hl=en
Now the first thing you need to do is download this rom.
https://www.androidfilehost.com/?fid=95916177934533333
(note: you can flash the rom of p5110 for p5113)
now to flash the rom follow the following steps.
1. Go to recovery mode
2. (have the rom in your sd card)flash it there .
use this link to know how to flash a rom.
https://www.youtube.com/watch?v=tJfPwWjnWGY
now you can reboot after flashing.
to get inbuilt google apps and play store you need to install something called GAPPS (Google apps) download from this link.
http://opengapps.org/?api=5.1&variant=nano
now you flash this zip the same way you flashed the rom.
any problems plz notoce me.
Click to expand...
Click to collapse
I was looking in the forum and someone said that I would also need to unlock the bootloader? If so, how do I do that?
Also, is there a difference between kingroot and towelroot? I saw a post in the forum here saying towelroot is fast and easy to root the tablet.
Not much difference.
Actually there is not much difference between kings root and towel root....towel root doesn't need a PC...but I have never used it so I can't assure you that it is safe.
And coming to the boot loader I don't know much about it but I didn't do anything like that before flashing a rom or rooting my tab2....
If you want further assistance about the boot loader I can help you with that..
rocketfans14 said:
I was looking in the forum and someone said that I would also need to unlock the bootloader? If so, how do I do that?
Also, is there a difference between kingroot and towelroot? I saw a post in the forum here saying towelroot is fast and easy to root the tablet.
Click to expand...
Click to collapse
it is not necessary to unloack bootloader for tab 2 as it comes with a unlocked bootloader from stock.
Zte blade l said:
Actually there is not much difference between kings root and towel root....towel root doesn't need a PC...but I have never used it so I can't assure you that it is safe.
And coming to the boot loader I don't know much about it but I didn't do anything like that before flashing a rom or rooting my tab2....
If you want further assistance about the boot loader I can help you with that..
Click to expand...
Click to collapse
Hey, it's been a while. Honestly speaking, when I first posted this thread, I didn't really have enough time to do the things so now I am finally back and trying to do it. So far, I know what recovery and rom I'm going to use with all the files downloaded and ready. Though, currently, I am still at the pre-root stage. I have read up things about kingoroot and not sure if I wanted to use it. So I looked around on the forum and wonder if Odin is still a working solution. Reading on the steps and guides, I was wondering if I need to have Kies installed?
rocketfans14 said:
Hey, it's been a while. Honestly speaking, when I first posted this thread, I didn't really have enough time to do the things so now I am finally back and trying to do it. So far, I know what recovery and rom I'm going to use with all the files downloaded and ready. Though, currently, I am still at the pre-root stage. I have read up things about kingoroot and not sure if I wanted to use it. So I looked around on the forum and wonder if Odin is still a working solution. Reading on the steps and guides, I was wondering if I need to have Kies installed?
Click to expand...
Click to collapse
Kies is not needed as it never helped.
You can depend on odin it is your only saviour when you are in trouble.
I think rooting with kingroot is easy as it is just connecting to your PC and cick the start button.
So just notice me when your ready.
And there is also one good news...?
Tab 2 has got marshmallow.
Zte blade l said:
Kies is not needed as it never helped.
You can depend on odin it is your only saviour when you are in trouble.
I think rooting with kingroot is easy as it is just connecting to your PC and cick the start button.
So just notice me when your ready.
And there is also one good news...��
Tab 2 has got marshmallow.
Click to expand...
Click to collapse
I have rooted the tablet. I did it with odin and twrp with flashing the updatedSuperSU zip folder.
I have tried flashing the CM12.1 rom yesterday but resulted in a boot loop. So for now, I'm just rooted and on stock rom until I or someone can find out what was the problem. I have read about the discussion with marshmallow but it seems to me that the project isn't really stable yet. From what I have researched lately, can I assume there's issue with the p51xx line of tablets? Because I saw many people having problems with p51xx and most people with the other tablets aren't having any.
rocketfans14 said:
I have rooted the tablet. I did it with odin and twrp with flashing the updatedSuperSU zip folder.
I have tried flashing the CM12.1 rom yesterday but resulted in a boot loop. So for now, I'm just rooted and on stock rom until I or someone can find out what was the problem. I have read about the discussion with marshmallow but it seems to me that the project isn't really stable yet. From what I have researched lately, can I assume there's issue with the p51xx line of tablets? Because I saw many people having problems with p51xx and most people with the other tablets aren't having any.
Click to expand...
Click to collapse
You first must update your tab to jelly bean bootloader, before trying out newer roms.
Or perhaps flash stock jb firmware with odin
Whatever you choose, both is ok.
http://forum.xda-developers.com/showthread.php?t=2642005
Read here
The first thing you do, is take a nandroid backup, it's very important at every step, unless you are really ready to risk. It's better to have it.
Next Read through the rom threads, clear your mind and your tab too. You must format data.
Stay on twrp 2.8.7.2. Don't go to the latest one yet.
Flash rom, wait, it will boot up.
Every tab behave differently with every rom, sure you are going to face soft reboots, on some roms it will be a lot, on some it will be less. I would suggest you try both LP and kk first.
Remember, it's better to keep this tab updated than to stay on stock. This tab 2 series has a emmc bug and staying on stock or jumping back is a risk too. I have been on kk and lp. They both have kept this tab running great and away from that bug.
billysam said:
You first must update your tab to jelly bean bootloader, before trying out newer roms.
Or perhaps flash stock jb firmware with odin
Whatever you choose, both is ok.
http://forum.xda-developers.com/showthread.php?t=2642005
Read here
The first thing you do, is take a nandroid backup, it's very important at every step, unless you are really ready to risk. It's better to have it.
Next Read through the rom threads, clear your mind and your tab too. You must format data.
Stay on twrp 2.8.7.2. Don't go to the latest one yet.
Flash rom, wait, it will boot up.
Every tab behave differently with every rom, sure you are going to face soft reboots, on some roms it will be a lot, on some it will be less. I would suggest you try both LP and kk first.
Remember, it's better to keep this tab updated than to stay on stock. This tab 2 series has a emmc bug and staying on stock or jumping back is a risk too. I have been on kk and lp. They both have kept this tab running great and away from that bug.
Click to expand...
Click to collapse
Do I have to unroot first? Do you have a link to making a nandroid backup?
Edit: Oh, I looked at the link you included and it said that if I am on stock jb (4.2.2), I can skip the update bootloader part..
When you flashed the new rom, did you do a factory reset (wipe data)?
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app
rocketfans14 said:
Do I have to unroot first? Do you have a link to making a nandroid backup?
Edit: Oh, I looked at the link you included and it said that if I am on stock jb (4.2.2), I can skip the update bootloader part..
Click to expand...
Click to collapse
Yes, that's what I meant too, if you're on jb already, you are fine. You don't have to unroot. For making a nandroid backup, use twrp recovery, there is an option for backup, select and backup all from there, if you get into bootloop or any other problem, as long as you can get back to recovery, you can restore from there. Most rom comes pre rooted.
rocketfans14 said:
I have rooted the tablet. I did it with odin and twrp with flashing the updatedSuperSU zip folder.
I have tried flashing the CM12.1 rom yesterday but resulted in a boot loop. So for now, I'm just rooted and on stock rom until I or someone can find out what was the problem. I have read about the discussion with marshmallow but it seems to me that the project isn't really stable yet. From what I have researched lately, can I assume there's issue with the p51xx line of tablets? Because I saw many people having problems with p51xx and most people with the other tablets aren't having any.
Click to expand...
Click to collapse
Did you clear dalvik cache in recovery before flashing rom?
Zte blade l said:
Did you clear dalvik cache in recovery before flashing rom?
Click to expand...
Click to collapse
Yes, I cleared the top four options in recovery, and formatted data before flashing.
billysam said:
Yes, that's what I meant too, if you're on jb already, you are fine. You don't have to unroot. For making a nandroid backup, use twrp recovery, there is an option for backup, select and backup all from there, if you get into bootloop or any other problem, as long as you can get back to recovery, you can restore from there. Most rom comes pre rooted.
Click to expand...
Click to collapse
That's what I did. Let me just briefly summarize what I have done:
used odin with twrp
booted into recovery and made back up
cleared dalvik, cache, system, and data, formatted data
flashed update supersu, booted into system and checked root with root checker
rebooted into recovery, cleared dalvik, cache, system, and data, formatted data again
flashed cm12.1 and gapps, rebooted but ran into bootloop at splash screen
rebooted into recovery and restored back up
So I'm rooted and on stock 4.2.2 currently.
champ1919 said:
When you flashed the new rom, did you do a factory reset (wipe data)?
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app
Click to expand...
Click to collapse
I did.
Try flashing blisspop or slimLP.
Hello XDA.So here is the story:I had Android 5.0.1 and I rooted it with CF-Auto Root File and I had normal recovery.Everytime I entered in recovery or rebooted my phone I couldn't use my phone (all the apps crashing) so everytime it happened I factory reseted the device.I found the solution:Flashed ClockWork Recovery and went to recovery and pressed reboot and the recovery fixed it.So the problem was the root..About a week ago I flashed CrDroid Marshmallow ROM which is awesome I dont have any problem with it.All the apps r working fine battery is fine etc but I want to root it.I opened XDA and i saw SuperSu beta.I think it will work for me but the problem is that it needs to be flashed with twrp
The questions are:
Is SuperSu Beta going to work for me?
If yes,if I flash twrp and flash supersu beta is the problem in Android 5.0.1 going to appear again (i mention it in the story) cuz if yes i dont know if twrp is going to fix the problem like ClockWork Recovery?
If no,how fo u suggest to root my phone?
Thanks
Sory for the longggg story and everything
And sorry for my english cuz idk if its good I livve in a non english speaking country and im only 14.
Custom roms are already rooted.
CM roms have root access options in the developer settings.
You can flash supersu if you want, but I recommend the stable version.
Also, clockworkmod is an outdated recovery. TWRP is recommended for newer roms 5.0+
GDReaper said:
Custom roms are already rooted.
CM roms have root access options in the developer settings.
You can flash supersu if you want, but I recommend the stable version.
Also, clockworkmod is an outdated recovery. TWRP is recommended for newer roms 5.0+
Click to expand...
Click to collapse
Thank you u made my day now that im thinking i came across the root option when i turned off animations and other stuffs for better speed but I didnt payed attention lol
Now the problem I had on Lollipop is gone?
So that means I can flash the TWRP?
r3i-al said:
Thank you u made my day now that im thinking i came across the root option when i turned off animations and other stuffs for better speed but I didnt payed attention lol
Now the problem I had on Lollipop is gone?
So that means I can flash the TWRP?
Click to expand...
Click to collapse
If TWRP doesn't work you can always return to clockworkmod.
GDReaper said:
If TWRP doesn't work you can always return to clockworkmod.
Click to expand...
Click to collapse
So hello again, I backed up my recovery (clockworkmod) in case something bad happened but it all went good I now have TWRP and everything is great.Thanks I really appreciate your help.
Hey androids, I submitted this question as a reply to the guide thread already earlier... just thought it might get noticed in this forum alittle quicker... any help would be appreciated
I'm working on a recalled tablet that I rooted to keep using, and up until recently the ROM i had installed on it worked famously (bliss pop with android 5.1.1). Now, I was having some issues with it and thought "Well, i'll try out a different rom!"
So, I already had root (obviously) and I had already successfully installed a rom to this tablet... Using TWRP (both the 2.8.x.x I used previously and the newest one available for the shield) I have backed up, wiped, and flashed the images to 3 different roms + gapps for the appropriate versions...
first, I was going an issue with it mounting the \data partition so it wouldn't flash anything... then I repaired and rewiped the partitions, and got (what appeared to me in the logs) a clean and successful install of the roms. Each time I successfully flashed a ROM and GAPPs zips I would go to boot the ROM and my table would sit on the "NVIDIA" boot screen forever, never advancing to boot the ROMs.
I was worried that I had made a mistake and bricked the thing (though, it's been on borrowed time anyways being a recalled tablet). But I was able to force shutdown the tablet and reboot it into TWRP for another try. Each time I cleared the previous flash, wiped the cache and system partitions, and would get another clean install... but each time, it would get stuck on that same boot screen....
Anyone have any suggestions? thoughts? ideas? fixes? answers?.... anything? lol
Thanks folks!
Assuming you are trying to flash MM custom roms: You need the MM bootloader.
edisso10018 said:
Assuming you are trying to flash MM custom roms: You need the MM bootloader.
Click to expand...
Click to collapse
Is the newest TWRP *not* a MM bootloader?
TWRP is a recovery. A bootloader is a bootloader.
This is covered in every rom thread that updated from L to M.
lafester said:
This is covered in every rom thread that updated from L to M.
Click to expand...
Click to collapse
I'll re-look, the guides i've read have only covered flashing TWRP, then using them to flash the ROM and GAPPs... Which is what I did the first time I rooted it and put on a custom ROM... though maybe I didn't delete the original bootloader the first time and did so accidentally this time?
Thanks for the heads up though people, we'll see if I can straighten it out now that I know what I'm looking for
edisso10018 said:
Assuming you are trying to flash MM custom roms: You need the MM bootloader.
Click to expand...
Click to collapse
Ok, so I've downloaded the shield recovery zip, flashed the boot.img to the boot... nothing, then I read on one of the guides here that the "blob.img" is the bootloader... but the zip has a blob, without the .img
So I then attempted to add .img, and flash it to "boot" in TWRP, and there was an error, saying the file is too large...
do you (or someone else) know where to find a guide on where to find/how to flash a MM bootloader?
thanks
Ok, so I found guide with links to the latest firmware update; I flashed it, rebooted, and now I've gotta past the "Nvidia" boot screen into the Bliss boot screen... It's been here for a couple minutes now, gonna give it alittle bit and then try to install the other ROM I had tried.
MilesD37 said:
Ok, so I found guide with links to the latest firmware update; I flashed it, rebooted, and now I've gotta past the "Nvidia" boot screen into the Bliss boot screen... It's been here for a couple minutes now, gonna give it alittle bit and then try to install the other ROM I had tried.
Click to expand...
Click to collapse
Im stuk with the same probem, can you sendme the Link to the gide please