The Affinity case is Poetic’s clear protection option. It’s made of clear polycarbonate with TPU flanking the outer edges with two vertical strips coming down the back. The addition of the TPU protects the case from being scratched and also protects the phone in the case of a fall. It’s a clever design choice. The case fits very snug, with all cutouts having ample room. The 3.5mm headphone jack cutout is not the widest, so be cautioned if you have a headset with a fat jack. The buttons are very clicky. In fact, all three buttons are clickier than the buttons on the other cases Poetic offers. Gripping the phone is made easy by the raised lines dashing the trim of the case. The Affinity takes the normally boring approach to clear polycarbonate cases, and makes it great.
Related
Hey fellas,
Got my hands on the new Rearth Ringke Fusion case, as the name states, it is a Fusion (hybrid) case consisting of a hard, clear plastic back with a TPU bumper. This combination provides very good protection from scratches and drops. The main selling feature of this case is the clear back, which allows you to see the etched glass pattern on your Nexus 4 (which we all love!). It does pick up scratches and fingerprints, as hard plastic does. The ports and cutouts are precise but the power/volume rockers are a bit stiff for my preference.
Check out the video below for more info:
nice video m8
At the discounted price right now, I give it a 4*/5*
PRO:
-large enough lip around the edge to allow for perfect face protection.
-all ports are cut away perfectly with enough room for a moderately sized 3.5mm jack
-home button is still accessible
-entire screen is still usable! (shocking that some cases don't allow the entire screen to be used...like my skyrocket's TPU case_
CON:
-side buttons are covered with TPU, which makes the buttons hard to press.
I had to remove a single star for the TPU covered power and volume buttons. The phone looks amazing with the clear case, almost like glass. The case is said to prevent slippage, though I find the case to be moderately slick. It does however have textured side grips to allow better grip. Overall the case is worth the $7 that it is listed at right now. It fits perfectly and it shipped before the device was released, so it was literally the only case I could purchase that fit my order list. Clear, TPU, thick enough to protect against moderate falls, right thickness lip to protect the face, no hard plastic, good looking, and cheap price. This fit my needs perfectly and I'm glad I purchased it. Over all, I would recommend this to anyone looking for a great TPU case.
Here is the link for amazon: CIMO TPU S-line case
Thanks for reading!
I'll also be reviewing two other cases as soon as they arrive. Caseology TPU cases in white (gloss) and white (Matte) as well as Jkase premium TPU matte black.
Image post, self explanatory.
full view
lip size on front.
The textured sides and covered volume rocker
I will be reviewing two white cases that I bought for my aluminum Nexus 6P.
Ultra-thin Protective Shock-proof Soft Case Cover (First 5 photos)
Link: http://r.ebay.com/sNSxZC
Quality: This is a matte TPU. The cutouts for the headphone jack, camera, flash and laser autofocus are spot on. The volume and power buttons are covered but work well. It adds some thickness (1.5-2 mm) that I wasn't a fan of considering how large this phone is already. While this case should provide some drop protection, the bottom is mostly uncovered and therefore unprotected. The case overall very flimsy, has noticeable wiggle room, and actually comes off a little too easily.
Color/design: The camera bar is colored black on all the different color options. It also has a smoother texture than the rest of the case. There is a nice leather-like design down the middle, which really enticed me originally. The white looks great on the aluminum phone.
Feel: The case definitely adds grip (the white area has a rough Saffiano leather-like feel) but also bulkiness of a TPU case. Since it's so flimsy and not a snug fit, it doesn't give off a premium feel. I also don't like that the camera area is black personally.
Overall, I do not recommend this case.
Slim Frosted Matte Hard PC Case Cover (Last 4 photos)
Link: http://r.ebay.com/EDVjsi
Quality: This is essentially identical to the snap-on hard cases from Spigen and Ringke. The fit is very snug with perfect cutouts for all areas. The plastic used here is stiffer than the Kugi slim hard case, so you'll need a credit card to remove the case. The bottom of the case was chipped slightly--barely noticeable. Don't expect much drop protection, only scratch protection.
Color/design: I love snap-on cases so I am being biased here. However, the unique aspect of this case is that it doesn't have the sandpaper coating that some hard cases have, which is good since the white versions of those love to pick up stains. This case has a soft-touch rubber feel, which so far has failed to attract stains.
Feel: Wonderful to hold. Adds the much needed grip to the Nexus 6P. Note this case adds more grip than what Ringke and Spigen have offered in the past. It barely feels like you have a case on the phone since it adds barely any bulk. Also love that it has no silly branding anywhere.
Overall, I recommend this case for what you pay for is considerably lower than the branded versions.
Hello! Poetic kindly provided me with both their Affinity and Revolution cases for review. As there are a bunch of similar threads here on XDA, I'll try to keep this post brief but informative.
General
One overarching statement I can make about these cases is that they have very distinctive designs, and probably won't appeal to those who appreciate a more minimalist aesthetic (e.g. those who use a Diztronic TPU or Spigen Slim Fit case). Style preferences, are, of course, objective, so I'll try to evaluate design based on function as much as form.
Affinity
Click here to buy it on Amazon.com
Album of pics here
Look and Feel - The case I received has an updated design (compared to the image currently on the Amazon page); the "P" logo is now between the cutouts for the microphone and fingerprint sensor, and the "Affinity" branding has been completely removed. I appreciate these changes, as it no longer obscures the phone's own "nexus" logo and overall reduces visual clutter. I've found the clear polycarbonate to be quite the fingerprint magnet; having not used any other clear cases to compare against, I'm not sure if this is a common thing or not. Hard TPU runs along the back, wraps around the corners, camera cutout, and buttons; however, the sides are a glossy plastic with raised bumps. I'm not fond of this plastic because while it does provide some extra grip, it's not quite as comfortable to hold as the rubber ridges on my Speck Candyshell Grip case. The slim profile of this case adds imperceptible bulk to the phone.
Cutouts - I've found no issues with cutouts for the ports, camera, or fingerprint sensor. Regarding the latter, the edge is pretty steeply bevelled, but doesn't feel sharp when I glide my finger over it. The thin profile of the case makes it not really an issue.
Protection - Speaking of the thin profile, the upper lip barely extends beyond the phone's screen; this is great for people who use (practically) edge-to-edge screen protectors. However, there is still enough of a lip for you to not worry about placing the phone face-down on a surface without a screen protector. Having TPU around all four corners should provide a little extra drop protection, as well. I haven't used the case long enough to see whether the TPU on the rear actually reduces scratching of the clear polycarbonate
Final Thoughts - This is a great case for someone looking for a clear back, but also wanting a bit more grip and drop protection than other clear cases on the market.
4/5 stars
Revolution
Click here to buy it on Amazon.com
Album of pics here
Look and Feel - This case is colossal with distinct, military/industrial styling. Personally, I don't really like the fake screws or seemingly-whimsical use of glossy TPU along the sides; if it provides no specific function, I don't think it needs to be a visual element (aside from some branding), in my opinion. If the hard polycarbonate back plate was really bolted onto the second TPU layer, that my opinion would've been different. The Nexus 6P is already a pretty large phone, and this case definitely makes it feel quite a bit bulkier. However, I really like the subtle texture of the TPU along the sides and button covers; it adds a nice amount of grip to an otherwise unwieldy case.
Cutouts - The headphone jack and USB-C ports are guarded by hard plastic and covered with TPU flaps; while I've found no fit issues with my headphones or stock charging cable, those with particularly bulky headphone jacks might run into issues, though the USB port opening is fairly generous. There's a much more gradual bevel towards the fingerprint sensor than with the Affinity case.
Protection - This case is obviously all about protection. The phone is first clipped into a plastic bumper with a built-in plastic screen protector before it's inserted into the TPU/plastic hybrid layer. This thing will be very resilient against drops! Having port covers is great protection against dust. Unfortunately, I found the built-in screen protector to be more of a hindrance than help, as there was a noticeable air gap between the plastic and the tempered glass protector on my phone's screen. This significantly decreased touch sensitivity, and I'd recommend just removing it in favour of a protector directly applied to your phone's screen.
Extra features - Aside from the Seidio Surface, I haven't seen any other phone cases with a built-in kickstand. This one is made of metal and feels very solid - a great addition for those who like watching media and like propping up their phone to do so. There is also a carabiner clip made of the same TPU as the rest of the case, increasing portability as this case is definitely not compatible for those who wear slim-fitting jeans.
Final thoughts - If you work in construction or any other rough/rugged environment, I'd recommend this case for the glut of protective features, short of waterproofness. However, its significant bulk and questionable styling makes me pause to recommend it to an average/casual user who doesn't need this level of protection.
3.5/4 stars
Just received the Poetic Affinity clear case with black TPU lining and I have to say it's one of the better cases I've used so far with my G5. The case is actually VERY thin, similar to a scap on polycarbonate case but there's the added benefit of the TPU accents on the insides of the case as well as the rim, top and bottom of the case. The corners - where the point of impact during a drop is most likely to occur - is reinforced with shock absorbing TPU but it's not over the top. Since it's TPU, I haven't had any issues with pocket lint. I have another case that is made of polycarbonate, and has a TPU boarder but that one lifts my screen protector, this one doesn't. That clear TPU on that other one is also turning slightly yellow. Since this one is mostly polycarbonate with a but of black TPU, I don't see that issue arising any time soon. I also like that the TPU accents on the back of the case also adds grip while the phone is on a slippery table.
I would imagine the back of case would also get less scratches over time since it's not making much contact with the surface on the table. I am pretty satisfied with this case since I was looking for a way show off the natural look of my gold G5 without sacrificing drop protection or worrying about yellowing TPU.
Positives:
> Lightweight and thin - adds very little bulk, similar to the other clear snap on cases on the market while providing more protection where it's needed
> Fits and is compatible with regular PET screen protectors - having used another clear polycarbonate case with TPU sides, this one does not cause my screen protector to bubble. It covers the trim of the phone right up to the screen protector.
> TPU lip provides enough spacing on the front so you can place it face down on a table or ground
> Raised ridges on the sides of the case which improves grip
> Cutouts on the top and bottom are precise - dead on
> Volume rocker buttons are precise and I get solid feedback when pressing them - no mushy volume buttons (something I've come across with another case already)
> Cutout for the fingerprint reader is large and not recessed - finger fits comfortably even if you have long nails
Not so good:
> Surprisingly difficult to put on and take off - The fit is much on point and that might be a good thing in terms of keeping out dust, but it was a bit tough to remove from the phone when I first got it. It gets easier once you remove it a few times but the case truly fits the G5 like a glove and a bit of force is required in order to pop the corners out. It does not scratch the phone but I have to say it is tougher to remove in comparison to other cases I've used including Spigen and UAG.
Thinking of getting this for my oneplus 3 but worried about yellow fade and scratches. How's yours going on till this day? @Kawaisa