hey i need to completely reset my phone and i cant seem to find a website that has this firmware(exept sammobile which is a SLOOOOOOW download)
if anybody has the link to download it, please put it in the comments thankssss
@[email protected]@[email protected] said:
hey i need to completely reset my phone and i cant seem to find a website that has this firmware(exept sammobile which is a SLOOOOOOW download)
if anybody has the link to download it, please put it in the comments thankssss
Click to expand...
Click to collapse
If you install citrio browser, it will boost a little bit your download speed, i download big foles from there(it stills downloading a little slower but citrio gives him a little boost)
Enviado do meu SM-G920F através de Tapatalk
Maybe specify your model and country so maybe someone has the firmware you need uploaded somewhere. Otherwise it is hard to help you.
You can install latest factory firmware for your model with Samsung Smart Switch. It will download directly from Samsung servers at full speed and install it on your phone. It's the simplest, fastest way to go back to stock if you don't already have firmware file.
Stock ROM's for the G920W8 can be found here: https://www.androidfilehost.com/?w=files&flid=38887
Unzip and flash with Odin using Bootloader mode.
LiViD said:
Stock ROM's for the G920W8 can be found here: https://www.androidfilehost.com/?w=files&flid=38887
Unzip and flash with Odin using Bootloader mode.
Click to expand...
Click to collapse
why do i have to flash it using bootloader mode?
@[email protected]@[email protected] said:
why do i have to flash it using bootloader mode?
Click to expand...
Click to collapse
There's no other way to do that?
@[email protected]@[email protected] said:
why do i have to flash it using bootloader mode?
Click to expand...
Click to collapse
Because Odin doesn't work outside bootloader mode. If you don't know what you are doing, have someone more experienced reload the software onto the device.
Also check Samfirm tool (https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647) put in model number and region - auto mode - binary nature + check and decrypt auto then flash in odin
Related
Hi,
Sorry for noob question but I don't want to brick my device:
I download the firmware and I have 5 items:
CP_G930FXXU1APFF_CL8252943_QB10098859_REV00_user_low_ship.tar
CSC_ORO_G930FORO1APGR_CL8432944_QB10423317_REV00_user_low_ship.tar
HOME_CSC_ORO_G930FORO1APGR_CL8432944_QB10423317_REV00_user_low_ship.tar
BL_G930FXXU1APGS_CL8252943_QB10463901_REV00_user_low_ship.tar
AP_G930FXXU1APGS_CL8252943_QB10463901_REV00_user_low_ship.tar
On my phone as you can see in the screenshot I have an older/newer bootloader, it's fine to flash ? and about CSC: wich file should I flash with the HOME or without ?
Screenshot from phone info:
https://drive.google.com/file/d/0B4c9tlTAV_M0WnhlSW9qV21OM2s/view?usp=sharing
Thanks !
Eurofighter_ty said:
Hi,
Sorry for noob question but I don't want to brick my device:
I download the firmware and I have 5 items:
CP_G930FXXU1APFF_CL8252943_QB10098859_REV00_user_low_ship.tar
CSC_ORO_G930FORO1APGR_CL8432944_QB10423317_REV00_user_low_ship.tar
HOME_CSC_ORO_G930FORO1APGR_CL8432944_QB10423317_REV00_user_low_ship.tar
BL_G930FXXU1APGS_CL8252943_QB10463901_REV00_user_low_ship.tar
AP_G930FXXU1APGS_CL8252943_QB10463901_REV00_user_low_ship.tar
On my phone as you can see in the screenshot I have an older/newer bootloader, it's fine to flash ? and about CSC: wich file should I flash with the HOME or without ?
Screenshot from phone info:
https://drive.google.com/file/d/0B4c9tlTAV_M0WnhlSW9qV21OM2s/view?usp=sharing
Thanks !
Click to expand...
Click to collapse
Hi mate
The bootloader you want to flash is older than the one you have , there use to be no possible to downgrade bootloader before , there is no chance of brick you will just get an error when trying to flash , why you want to downgrade it?
Regarding CSC , use one of the two , if you use CSC you will factory reset your phone , if you use home_csc you will not factory reset your phone
Check this thread , is a nice guide for flashing with Odin
http://forum.xda-developers.com/galaxy-s7/how-to/official-stock-firmware-update-odin-t3369431
MAX 404 said:
Hi mate
Regarding bootloader that is not a problem
Regarding CSC , use one of the two , if you use CSC you will factory reset your phone , if you use home_csc you will not factory reset your phone
Check this thread , is a nice guide for flashing with Odin
http://forum.xda-developers.com/galaxy-s7/how-to/official-stock-firmware-update-odin-t3369431
Click to expand...
Click to collapse
Thanks, then I will use CSC simple
@MAX 404
CP what is it ? Is required ?
Eurofighter_ty said:
Thanks, then I will use CSC simple
Click to expand...
Click to collapse
Hi
I edited my reply while you posted yours....check it out
MAX 404 said:
Hi
I edited my reply while you posted yours....check it out
Click to expand...
Click to collapse
@MAX 404
I don't realized that I was downgrading the bootloader beacuse I don't know how Samsung's numbering works.
My target is to flash carrier firmware to get access to Wi-Fi Calling and 4G Voice.
So I flash AP,CP and CSC, right ? without bootloader.
Eurofighter_ty said:
I don't want to downgrade it beacuse I don't know how the version works on Samsung.
My target is to flash carrier firmware to get access to Wi-Fi Calling and 4G Voice.
So I flash AP,CP and CSC, right ? without bootloader.
Click to expand...
Click to collapse
Hi
CP is your modem
You will get wifi calling and 4G voice if is available in you country /carrier provider
yes you can flash without bootloader
Thank you !
Sent from my SM-G930F using Tapatalk
Hello everyone I am new here.
I have a problem. I need help. I accidently bricked the phone. Samsung galaxy s6 (smg920F) with wrong version of android. :crying:. I used odin3, i dont know how to see build number and version when the phone is bricked. Thank you in advance
dragonovak said:
Hello everyone I am new here.
I have a problem. I need help. I accidently bricked the phone. Samsung galaxy s6 (smg920F) with wrong version of android. :crying:. I used odin3, i dont know how to see build number and version when the phone is bricked. Thank you in advance
Click to expand...
Click to collapse
http://cdn.droidviews.com/wp-content/uploads/2015/03/Odin3_v3.12.7.zip Odin 3.12.7 (latest)
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 SamFirm 0.3.6 (latest)
http://samsung-usb-driver-for-mobile-phones.en.lo4d.com/download Samsung USB Drivers 1.5.63 (latest)
Install latest USB drivers, unpack lastest Odin3 and SamFirm. Use SamFirm to download latest firmware for your model, so put "SM-G920F" in "model" check "Auto" under that, put CSC code for your country in "Region", download it and then just flash it in Odin
Here you got full CSC codes list and also short guide how to use SamFirm
https://www.androidsage.com/2017/07...specific-product-code-csc-and-country-region/
How to root then? > CF-Auto-Root
How to get TWRP then? > latest TWRP
Customize? > Look my signature
rifek4 said:
http://cdn.droidviews.com/wp-content/uploads/2015/03/Odin3_v3.12.7.zip Odin 3.12.7 (latest)
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 SamFirm 0.3.6 (latest)
http://samsung-usb-driver-for-mobile-phones.en.lo4d.com/download Samsung USB Drivers 1.5.63 (latest)
Install latest USB drivers, unpack lastest Odin3 and SamFirm. Use SamFirm to download latest firmware for your model, so put "SM-G920F" in "model" check "Auto" under that. Then put CSC code for your country in "Region". Then just flash it in Odin
Here you got full CSC codes list:
Click to expand...
Click to collapse
thank you, it works as it should be :good: :victory:
dragonovak said:
thank you, it works as it should be :good: :victory:
Click to expand...
Click to collapse
No problem... I think that post will help in future to another no experienced users xD
I have another question. which program you recommend for rooting samsung galaxy s6
dragonovak said:
I have another question. which program you recommend for rooting samsung galaxy s6
Click to expand...
Click to collapse
Look my signature on what i'm. For you I prefer now flash CF_AutoRoot via Odin then latest TWRP also via Odin and follow my signature... For ROOT i'm using latest SuperSU SR3 in BINDSBIN mode with suhide for SafetyNet working and no problems with Synapse (look HERE for best settings).
Thak you , i root with odin3. I took root file from here (https://autoroot.chainfire.eu/ )now its done.
rifek4 said:
http://cdn.droidviews.com/wp-content/uploads/2015/03/Odin3_v3.12.7.zip Odin 3.12.7 (latest)
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 SamFirm 0.3.6 (latest)
http://samsung-usb-driver-for-mobile-phones.en.lo4d.com/download Samsung USB Drivers 1.5.63 (latest)
Install latest USB drivers, unpack lastest Odin3 and SamFirm. Use SamFirm to download latest firmware for your model, so put "SM-G920F" in "model" check "Auto" under that, put CSC code for your country in "Region", download it and then just flash it in Odin
Here you got full CSC codes list and also short guide how to use SamFirm
https://www.androidsage.com/2017/07...specific-product-code-csc-and-country-region/
How to root then? > CF-Auto-Root
How to get TWRP then? > latest TWRP
Customize? > Look my signature
Click to expand...
Click to collapse
odin seems not working for me it just do nothing. it just stop at setting up? any suggestion i came from ultimate nougat s8 port. and wanna flash stock firmware.
rifek4 said:
What doesn't working? How? What happenes...? You can give a little bit more information, im not Nostradamus. Normally it's working for everybody so...
Click to expand...
Click to collapse
i know the problem now... i was so f***** stupid reading every word in the instruction... forget to read the firmware iwas flashing... it was for my s4 i9505 firmware. thanks anyway forgive my stupidity.... hahaha
Hello guys I am noob please help me guys
Yesterday i installed [ROM][7.0][STABLE][BUILD 1.5][GENISYS XPERIENCE ROM][J700F/H/M]
it was working fine but issue is kernel seandroid enforcing but phone was working
i tried to install EDGE PANEL GENISYS XPERIENCE patch
here i switched off USB DEBUGGING AND OEM LOCK
i tried volume+home+power phone got off
when i trying to on it says custom binary custom binary blocked by frp lock
i tried to flash many recoveries + stock rom but no use please help
after reading many posts i tried to download stock firm from sammobile.com but unable to download
now only working is i can get in download mode nothing else
sorry for my bad english can say wrost
~KUMAR~ said:
Hello guys I am noob please help me guys
Yesterday i installed [ROM][7.0][STABLE][BUILD 1.5][GENISYS XPERIENCE ROM][J700F/H/M]
it was working fine but issue is kernel seandroid enforcing but phone was working
i tried to install EDGE PANEL GENISYS XPERIENCE patch
here i switched off USB DEBUGGING AND OEM LOCK
i tried volume+home+power phone got off
when i trying to on it says custom binary custom binary blocked by frp lock
i tried to flash many recoveries + stock rom but no use please help
after reading many posts i tried to download stock firm from sammobile.com but unable to download
now only working is i can get in download mode nothing else
sorry for my bad english can say wrost
Click to expand...
Click to collapse
The issue is you turned of oem unlock which is always needed. I think only option is flashing of stock rom through odin no other option i know of. i guess its hardbricked mostly.
Download the latest samfirm tool available on xda.
Open the samfirm tool. Enter model and region. Tick Auto and binary nature.
Click on Check update. It will show the latest firmware available on samsung server.
Then click on download. It will download four file full firmware. Then flash it through odin.
You need a strong internet connection to download the file.
All the best.
rajnikant574 said:
Download the latest samfirm tool available on xda.
Open the samfirm tool. Enter model and region. Tick Auto and binary nature.
Click on Check update. It will show the latest firmware available on samsung server.
Then click on download. It will download four file full firmware. Then flash it through odin.
You need a strong internet connection to download the file.
All the best.
Click to expand...
Click to collapse
Thank you rajiKanth as gou said Everything done
Now i got back My phone but thing Is not supporting voLTE
Have you flashed CSC OR HOME_CSC ?
If you have flashed CSC then check with the Network setting
What is your phone model and region?
I flashed only AP file only I don't have CSC
I got but it's md5 error
My phone model is SM-700F
Region INDIA
~KUMAR~ said:
I flashed only AP file only I don't have CSC
I got but it's md5 error
My phone model is SM-700F
Region INDIA
Click to expand...
Click to collapse
Have you checked Binary Nature before Check Update?
~KUMAR~ said:
I flashed only AP file only I don't have CSC
I got but it's md5 error
My phone model is SM-700F
Region INDIA
Click to expand...
Click to collapse
Simply install TWRP using odin. And flash hyperion v2 rom alongwith fix file. I hope it'll sort out ur volte problem as well you'll get a high quality rom experience for this model. I am using the same in India.
Samfirm is completely garbage.use updato from play store, it's called android updates after u search for updato.download and Search up your firmware. Copy to computer and unzip then reboot to download mode.load firmware into AP slot. Tick nand erase and reboot. Begin flash of firmware. When it reboots u are fully stock. Start over, flash twrp then whatever ROM and root etc. Samfirm never even works. Don't waste your time.
pkjha.dylangroup said:
Simply install TWRP using odin. And flash hyperion v2 rom alongwith fix file. I hope it'll sort out ur volte problem as well you'll get a high quality rom experience for this model. I am using the same in India.
Click to expand...
Click to collapse
Thanks for replay I did same as you said but I installed enigma ROM which is awesome rom
I need to factory reset my view 10 BKL-L09 but when I go into recovery once it connects to wifi it says it failed to get the package and I'm stuck. I can get it into fastboot mode but don't know of a way to factory reset and then flash whichever image I would need. I've tried the adb line that deletes user data to no avail. I'm guessing since things got corrupted when I tried to flash xposed that its causing the recovery problems as well I guess.
I've downloaded firmware finder and downloaded the appropriate files for the bkl-l09 however when I use the extractor tool for some reason I can't seem to find the img files I need to input into the huawei multi tool that will let you inbrick so if anyone has those files I'd appreciate it or maybe give me a step by step guide to how to use the extractor tool properly
Sent from my ONEPLUS A5000 using Tapatalk
In erecovery download the Full Firmware Package works only with China Version.
letschky said:
In erecovery download the Full Firmware Package works only with China Version.
Click to expand...
Click to collapse
So what can I do since I have the international version?
Sent from my ONEPLUS A5000 using Tapatalk
whymista said:
So what can I do since I have the international version?
Sent from my ONEPLUS A5000 using Tapatalk
Click to expand...
Click to collapse
You should not change anything before there is a full firmware package.
Unfortunately, there is still nothing for the international version.
That's why I'm not rooting anything anymore,before the full firmware gives
Same on my Honor 7x no Updates or Firmware since 1,5 Month
whymista said:
So what can I do since I have the international version?
Click to expand...
Click to collapse
same question here
hi all
i got a samsung s8+ with G955FXXU2CRED_CL13569719 firmware on it.
How can i downgrade it to android 7.0?
If i flash 7.0 software i got failed when i flash BL
If i only flash AP the device shows encryption failed and then then i get boot loop with erasing android icon.
Hope some one has a solution here.
u can try downgrade to CRAP firmware (the 1st Oreo) and then try to downgrade to android 7.0 with all files.
I downgraded from 3 previous versiones of Oreo, didnt try agaik with the later ones but i read that the new boatloader in kinda tricky now.
galarond said:
u can try downgrade to CRAP firmware (the 1st Oreo) and then try to downgrade to android 7.0 with all files.
I downgraded from 3 previous versiones of Oreo, didnt try agaik with the later ones but i read that the new boatloader in kinda tricky now.
Click to expand...
Click to collapse
With crap i also get failed
When i flash Crap AP File only is get stuck in boot loop With installing update. And then reboot.
Got it with a new Combination file
pctronic said:
Got it with a new Combination file
Click to expand...
Click to collapse
Please do share...and did you manage to install TWRP recovery afterwards?
Moe5508 said:
Please do share...and did you manage to install TWRP recovery afterwards?
Click to expand...
Click to collapse
Didnt use TWRP here is link for combination
https://shell.boxwares.com/Download.aspx?L=6583
pctronic said:
hi all
i got a samsung s8+ with G955FXXU2CRED_CL13569719 firmware on it.
How can i downgrade it to android 7.0?
If i flash 7.0 software i got failed when i flash BL
If i only flash AP the device shows encryption failed and then then i get boot loop with erasing android icon.
Hope some one has a solution here.
Click to expand...
Click to collapse
pctronic said:
Got it with a new Combination file
Click to expand...
Click to collapse
pctronic said:
Didnt use TWRP here is link for combination
https://shell.boxwares.com/Download.aspx?L=6583
Click to expand...
Click to collapse
Stability?! Battery?! Lags?! Connectivity?! Source?!
Remove/change PDA reg?! Erase data?! (CSC issue)
Is this rom Nougat or prev Oreo version?!
Some info about this rom?! It comes from some forum's discussion?!
Odin flash works fine but then am on what seems to be bootloop...am stuck on screen with "FACTORY BINARY" message showing and big progress arrows now for 20 minutes...is that normal to take so long?
pctronic said:
Got it with a new Combination file
Click to expand...
Click to collapse
Will this work on s8 too?
hello
This can not be used combination for daily use is only for developers and fix the problem. Now working after this version combination . you can be loaded here
https://updato.com/firmware-archive-select-model?record=E60FECB3632411E89F15FA163EE8F90B
download and flash with odin without CP file and no your mobile go back to 7.0 .
thanks I hope that I have helped you.
nabel_sweed said:
hello
This can not be used combination for daily use is only for developers and fix the problem. Now working after this version combination . you can be loaded here
https://updato.com/firmware-archive-select-model?record=E60FECB3632411E89F15FA163EE8F90B
download and flash with odin without CP file and no your mobile go back to 7.0 .
thanks I hope that I have helped you.
Click to expand...
Click to collapse
Nah this fails on the latest U2CRED ROM with bootloader v2...