Need some help with my Acer Iconia one 7 B1-780 tablet! - General Questions and Answers

Hello, I have an acer inconia one 7 b1-780, it will not go past the Acer Powered By Acer screen. I have tried factory reset / data wipe. I have tried to connect it to my computer, But my computer will not detect it. all these sites tell me to turn on USB Debugging. but i can't do that cause i am not able to get into the tablet to turn it on. I was also told to install the USB Drivers. Which i have done from the acer support website. I started looking into installing the os from the sd card but it tells me the Marshmellow os is newer on the table and can not be installed. I have searched high and low for different suggestions that could eventually fix the table. but with no avail, i am unable to get it to go past that one screen. So. i am coming on here to get help on fixing this for me. I am up for any suggestions.
thanks in advance for all the help that you all provide to me..

Related

SuperPAD not recognized by Windows 7

Hi.
I have a SuperPAD with the latest ROM....I am trying to connect the PAD to my Windows 7 machine....but it does not recognize it...it just stays silent...NOTHING...ABSOLUTELY NOTHING....
As is didnt get any USB cable with my PAD..I bought one off the shop and have connected it.....
Wondering if the Cable was working....(going thru' forums..) I switched On the PAD Holding the Menu Key and Switching it on.....It did once show......on the Computer..... Installing drivers.......But Nothing after that.....
I also tried it with SD Cards and Without SD cards
Need some HELP here folks.....it will be appreciated...
Thanxxx
indtram said:
Hi.
I have a SuperPAD with the latest ROM....I am trying to connect the PAD to my Windows 7 machine....but it does not recognize it...it just stays silent...NOTHING...ABSOLUTELY NOTHING....
As is didnt get any USB cable with my PAD..I bought one off the shop and have connected it.....
Wondering if the Cable was working....(going thru' forums..) I switched On the PAD Holding the Menu Key and Switching it on.....It did once show......on the Computer..... Installing drivers.......But Nothing after that.....
I also tried it with SD Cards and Without SD cards
Need some HELP here folks.....it will be appreciated...
Thanxxx
Click to expand...
Click to collapse
Can't find any windows 7 or 7 64-bit drivers is the problem... I had to install xp on a seperate partition in order to get it to recognize the superpad... I'll let you know if I find anything...
its already tried to install once and failed. Thats why u get nomore popups
go into your device manager and find the unknown device
update drivers
point it to ur burntool folder
works for me
i know this is an old thread but did not want to open a new one for the same purpose. Just got a SuperPad as a gift. Could root it with Gingerbreak. Now the only problem i have is that when i connect it to the pc via the supplied usb cable nothing happens, no pop up nothing, and the superpad does not even show up as unknown device, so i do not know how to make it use the drivers i downloaded.

[help] aoson m19 bricked

Hi everyone!
Today I've tried to update my AOSON M19 tablet but something goes wrong and now the tablet is bricked. Things happened by this way:
-I've tried to update the tablet with the Rockchip Batch Tool following the recommended procedure that has worked in all the others update I've made. The procedure has formatted successfully the deviced but has filed the transfer of the image file to the tablet.
-After this step the tablet seems to be dead: it doesn't power on and the screen is black.
-I've tried to connect the tablet to the USB port of my pc (windows xp) but the system doesn't recognize it. Under Windows Hardware Manager I have an Unknown Device connected to the system USB Hub.
-I've tried to install the Rockchip drivers that have always worked before but windows tell me that the drivers specified have no information about the hardware I'm trying to install.
I'm stuck in this situation and I don't know what to do. Hope someone could help me.
Thank you very much in advise

[Q] A

Hi there,
Trying to get rid of the impressively slow OS from my A700 and switch to iconiaN but i'm stucked at the very very first step : rebooting bootloader
I've installed the Acer USB driver though i could browse the tablet. I've enables USB debugging. But i cannot see any device when listing it or trying to reboot bootloader.
W8 Pro 64 bits & A700 stock (4.1). Any help ?
Thanks

[Q] [HELP] USB Not Recognised {Samsung Tab P3100}

Hello everyone,
I have a Samsung tablet (GT-P3100) running Android 4.4.2 kitkat (3.0.101-mokee-Espresso 10++)-NIGHTLY.The tablet doesn't connect to my laptop..
It gives a "USB not recognised error". I reinstalled Samsung kies twice, downloaded the drivers from other sources and installed but in vain.
The cable i am using is a usb+charging cable that came with the tablet. I would like to mention that the problem came a month after i installed the Mokee rom(in the mean time everything was working fine).
Using the same cable,however, i am able to charge the tablet.
The tablet shows no other error.
The laptop is Dell Latitude E6320 (original windows 7 professional).
Any help and an early response would be highly appreciated.
Thanks!
(Till then i m using connectify hotspot to share fling files which is slow and it also takes time setting up).
Bhavya06 said:
Hello everyone,
I have a Samsung tablet (GT-P3100) running Android 4.4.2 kitkat (3.0.101-mokee-Espresso 10++)-NIGHTLY.The tablet doesn't connect to my laptop..
It gives a "USB not recognised error". I reinstalled Samsung kies twice, downloaded the drivers from other sources and installed but in vain.
The cable i am using is a usb+charging cable that came with the tablet. I would like to mention that the problem came a month after i installed the Mokee rom(in the mean time everything was working fine).
Using the same cable,however, i am able to charge the tablet.
The tablet shows no other error.
The laptop is Dell Latitude E6320 (original windows 7 professional).
Any help and an early response would be highly appreciated.
Thanks!
(Till then i m using connectify hotspot to share fling files which is slow and it also takes time setting up).
Click to expand...
Click to collapse
Any Luck with this, I am having the same issue, My Tab 2 is also not been recognized here. I am stuck on Samsung Tab Initial Boot logo. All this happened when I was trying to flash custom rom on it.
anshumangoyal said:
Any Luck with this, I am having the same issue, My Tab 2 is also not been recognized here. I am stuck on Samsung Tab Initial Boot logo. All this happened when I was trying to flash custom rom on it.
Click to expand...
Click to collapse
try to uninstall drivers from pc, and install it again. maybe fix
sry for my bad english

[Q] Lenovo A10-70 A7600 Bricked

Hi. The other day, I bought a new Tablet that was on sale. I tried rooting it, but it led to a brick (at least that's what it looks like).
It won't start, it won't go into recovery, it won't do nothing. I tried connecting it to the computer but there was no hope in that because the computer can't recognize the device and always shows it as "Unknown Device". Trust me, I tried updating the "Unknown Device"'s drivers, but it still didn't work. Any way around this? Thanks.

Categories

Resources