I'm having problems. I flashed the img from the twrp website using flashify and now the phone is stuck on the screen with the android saying downloading. in red it says "could not do normal boot" and under it it says "ODIN mode".
Anybody know what I should do next to either get twrp installed or get the stock recovery back on the phone? I'm not real familiar with ODIN or samsung phones. This is my first non HTC phone.
Thanks
edit: I flashed the nd2 rom through odin and I can use my phone again. Now I just have to figure out how to properly install a custom recovery
Make sure you have the drivers installed that's why I think Odin is not recognizing. You should see a Com port in odin. Doesn't matter what Com just as long as it shows. At this point I think odin is your only option. I believe you could odin nd2 and that would restore your stock recovery but I would just odin twrp then see if it boots
Sent from my SM-G900P using xda premium
crown drinker said:
Now I just have to figure out how to properly install a custom recovery
Click to expand...
Click to collapse
Just go to my post here: http://forum.xda-developers.com/showthread.php?t=2737724
There is a link to the S5 PC drivers. Then just skip down to the link for installing TWRP via Odin and follow the steps.
Thanks guys. I'll update my drivers and give it a try.
Hi
I restore my N920P to stock N920PVPU2BPC3, than I restart to Recovery, when I choose "Apply update from SD card", Receovery say "E:\ failed to mount /sdcard (No such file or directory)", Please check my attachments
I flash TWRP 3.0.2-0 TeamWin Recovery by odin, file name twrp-3.0.2-0-M-nobleltespr.tar
After restart phone stuck in bootloops, and I have to flash to stock again.
Anyone help me?
Thanks
NHN said:
Hi
I restore my N920P to stock N920PVPU2BPC3, than I restart to Recovery, when I choose "Apply update from SD card", Receovery say "E:\ failed to mount /sdcard (No such file or directory)", Please check my attachments
I flash TWRP 3.0.2-0 TeamWin Recovery by odin, file name twrp-3.0.2-0-M-nobleltespr.tar
After restart phone stuck in bootloops, and I have to flash to stock again.
Anyone help me?
Thanks
Click to expand...
Click to collapse
Go to the moar secret mission thread on sprint note 5 android development page, on his instructions there is a twrp file either tar or zip. Id download the tar, flash it using odin and either boot to recovery with button combo (power+vol up+home) or if it reboots automatically after odin flash just power off, and hold combo until booted to twrp, if your not already rooted be sure to have a zip file of supersu saved, once in twrp flash the supersu, BE SURE to have OEM unlock enabled and usb debugging in the developers settings. Hopefully your rooted already, if not, get rooted by that or tutorials on here. Oem unlock deff needs to be on before anything.
---------- Post added at 07:02 AM ---------- Previous post was at 06:48 AM ----------
You cant flash it by using that recovery menu you have in pic upload. Youll have to do some reading probably on how to root it and stuff, to keep it slim and hoping you know what to do/doing hoping your using the actual odin software on a windows pc and all of that, are you? If not, pc- go to google "odin samsung" should come up first result or close ,download odin (also in moar 3.2 thread), unzip, open odin, boot phone to download mode holding (power+vol down + home) at screen press up to continue, plug in pc w/usb. Wait until odin recognizes and drivers installed if needed. Add twrp tar file to ap slot on odin. Flash. Find tutorial on here, or moar 3.2 has step by step with odin and twrp files needed. Also check cf-autoroot for your device as i am thinking u may not be rooted or have odin installed or have an idea on what ur trying to do and not saying in mean or disrespectful way and correct me if wrong and if so my apologies, but from your images, steps, wording, i suggest browsing and reading other easily found tutorials and howtos on rooting, installing custom recovery and how to not brick your phone which is about 2 steps away from where you were at, also fixable, pita that can be avoided by using threads others have written on here. If you want additional help or have questions message me and ill guide more specifically.
After flashing twrp, you must, after checking that oem unlock is on and usb debugging is on, flash a custom kernel. I used Aurora Kernel.
i forgot to factory reset before i downgrade the os with odin. now the phone just stuck on the booting screen. i can get to download mode but not to recovery mode. anyone have some solution?
You could try flashing everything from the firmware you download from sammobile.com (BL + AP + CP + CSC (not HOME_CSC)) + check re-partition in Odin.
It will wipe everything. Be sure to download the correct firmware supposed by your hardware, else bad things may happen.
irvinnggg said:
i forgot to factory reset before i downgrade the os with odin. now the phone just stuck on the booting screen. i can get to download mode but not to recovery mode. anyone have some solution?
Click to expand...
Click to collapse
You can download the firmware from Sammobile, and flash it via ODIN, this should hopefully get you back to Stock OS.
You could also try to flash twrp img via ODIN and try to access Recovery Mode again.
Goodluck
Revontheus said:
You can download the firmware from Sammobile, and flash it via ODIN, this should hopefully get you back to Stock OS.
You could also try to flash twrp img via ODIN and try to access Recovery Mode again.
Goodluck
Click to expand...
Click to collapse
i flash the firmware from sammobile. but my phone just wont boot. i cant shut the phone down as it's internal battery
Have you flashed the Appropriate Bootloader and Modem?
At what screen is it stuck at? You could use the Volume Up Key plus home, plus Power Button to force boot it.
Here check This link out, it might help you.
Good luck
irvinnggg said:
i flash the firmware from sammobile. but my phone just wont boot. i cant shut the phone down as it's internal battery
Click to expand...
Click to collapse
Well aslong as you can turn it on download mode you should be fine. If i was you i would download samsung kies 3 and put the phone in download mode and try to the firmware recovery from the top left section in the app. This will flash back the original firmware that came with the phone.,
---------- Post added at 04:42 PM ---------- Previous post was at 04:39 PM ----------
And if you flashed the CSC then you phone should be wiped when you boot it but maybe you flash the wrong file but like i said hard boot your device and set it to download mode and you should be fine
Hello,
i just flashed TWRP in Odin and now i´m not able to boot into Download Mode or Recovery anymore. When i just press the power button the phone shows the splash screen and the boot animation but doesnt get past that. I also cant reach the phone with ADB. Is there any way to flash a file without Odin/Download Mode?
Need help
MICH_*** said:
Hello,
i just flashed TWRP in Odin and now i´m not able to boot into Download Mode or Recovery anymore. When i just press the power button the phone shows the splash screen and the boot animation but doesnt get past that. I also cant reach the phone with ADB. Is there any way to flash a file without Odin/Download Mode?
Need help
Click to expand...
Click to collapse
i don't understand how you can't enter to download mode , did you do this combo keys (hold vol.down+hold home +hold power) right ?
are you sure flashed correctly twrp for your model device ?
if you can't enter to download mode , i'm sorry bro to tell you , your phone is hard bricked .
shiko2007 said:
i don't understand how you can't enter to download mode , did you do this combo keys (hold vol.down+hold home +hold power) right ?
are you sure flashed correctly twrp for your model device ?
if you can't enter to download mode , i'm sorry bro to tell you , your phone is hard bricked .
Click to expand...
Click to collapse
Maybe one of the buttons is broken or so. Sometimes it does boot to download mode, sometimes it doesnt. I managed to install a custom rom. I tried two Roms and none of them is able to boot. Both get stuck on bootanimation. I did not turn on USB debugging or allow OEM unlock in the stock rom before installing a custum rom.. May this be related to that?
Just tried a AOSP Rom (unofficial Lingue) and it booted like a charm. But Samsung Rom won´t boot. Do you guys know a solution?
MICH_*** said:
Just tried a AOSP Rom (unofficial Lingue) and it booted like a charm. But Samsung Rom won´t boot. Do you guys know a solution?
Click to expand...
Click to collapse
if you can access to download mode .
1-flash latest your firmware
2-flash cf-autoroot again if you (flash latest marshmallow) by odin
if you flash nougat
1-flash latest twrp image for your s6 model
2-flash magisk root latest by twrp
after that you should access to stock rom
shiko2007 said:
if you can access to download mode .
1-flash latest your firmware
2-flash cf-autoroot again if you (flash latest marshmallow) by odin
if you flash nougat
1-flash latest twrp image for your s6 model
2-flash magisk root latest by twrp
after that you should access to stock rom
Click to expand...
Click to collapse
I´m just wondering because an AOSP Rom is able to boot but not a Samsung one.
I flashed 7.0 Stock Firmware and not even this Rom is able to boot. Still stuck at Bootanimation
MICH_*** said:
I flashed 7.0 Stock Firmware and not even this Rom is able to boot. Still stuck at Bootanimation
Click to expand...
Click to collapse
make factory reset and wipe cash &data after flash by odin
if it stuck on boot animation try while you there to make this combo to reboot device (hold vol.down + hold power until boot logo appear )
shiko2007 said:
make factory reset and wipe cash &data after flash by odin
if it stuck on boot animation try while you there to make this combo to reboot device (hold vol.down + hold power until boot logo appear )
Click to expand...
Click to collapse
i have already done that but no success. what else could be the problem? I've got no more ideas how to get it boot
ok let's begin from start , what's your baseband and country firmware you tried to flash ?
what's your original country firmware ?
shiko2007 said:
ok let's begin from start , what's your baseband and country firmware you tried to flash ?
what's your original country firmware ?
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920F/DBT/download/G920FXXU5EQDF/129685/
That's the firmware I flashed. My device is unlocked from Germany.
How to tell baseband etc when I don't get into the system?
MICH_*** said:
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920F/DBT/download/G920FXXU5EQDF/129685/
That's the firmware I flashed. My device is unlocked from Germany.
How to tell baseband etc when I don't get into the system?
Click to expand...
Click to collapse
ok bro , download this firmware and try it
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920F/XEO/download/G920FXXU5EQD7/130714/
-before flash it by odin :
make factory reset and wipe cash
-after flash it by odin :
make again factory reset and wipe cash
-wait 10-15 min to boot up
shiko2007 said:
ok bro , download this firmware and try it
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920F/XEO/download/G920FXXU5EQD7/130714/
-before flash it by odin :
make factory reset and wipe cash
-after flash it by odin :
make again factory reset and wipe cash
-wait 10-15 min to boot up
Click to expand...
Click to collapse
What's the difference between the firmware I flashed and this one you provided? I exclude a hardware failure because a AOSP ROM did boot.
Possible for the partition layout to be corrupted?
MICH_*** said:
What's the difference between the firmware I flashed and this one you provided? I exclude a hardware failure because a AOSP ROM did boot.
Possible for the partition layout to be corrupted?
Click to expand...
Click to collapse
bro , the firmware difference between country and others , there firmware can't boot correctly if you installed on device , another firmware will boot correctly .
i don't think there are a failure on hardware cuz you can boot your device correctly and you can use it .
however , you can try flash this firmware without any problem , if also not booted you may need pit file for the firmware for Poland but first try flash without pit
if not work with you only (not boot up)
-flash firmware with this pit file together with
1-check option re-partition
2-make sure you check auto reboot and f.reset time
pit file for fimware
https://drive.google.com/file/d/0BzyeAt2hy6XeSGJyMjZoMDdGYkk/view
shiko2007 said:
bro , the firmware difference between country and others , there firmware can't boot correctly if you installed on device , another firmware will boot correctly .
i don't think there are a failure on hardware cuz you can boot your device correctly and you can use it .
however , you can try flash this firmware without any problem , if also not booted you may need pit file for the firmware for Poland but first try flash without pit
if not work with you only (not boot up)
-flash firmware with this pit file together with
1-check option re-partition
2-make sure you check auto reboot and f.reset time
pit file for fimware
https://drive.google.com/file/d/0BzyeAt2hy6XeSGJyMjZoMDdGYkk/view
Click to expand...
Click to collapse
i flashed the Poland Firmware, same thing.
The Phone is from Germany, I would like to flash German firmware and pit if possible. Why did you exactly recommend this Poland version?
update: With the pit file flashed it doesn't boot either.
MICH_*** said:
i flashed the Poland Firmware, same thing.
The Phone is from Germany, I would like to flash German firmware and pit if possible. Why did you exactly recommend this Poland version?
update: With the pit file flashed it doesn't boot either.
Click to expand...
Click to collapse
ok bro , firmware of Germany
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920F/DBT/download/G920FXXU5EQDF/129685/
pit for this firmware
https://drive.google.com/file/d/0BzyeAt2hy6XeLXVwMVFVdW9yM1k/view
shiko2007 said:
ok bro , firmware of Germany
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920F/DBT/download/G920FXXU5EQDF/129685/
pit for this firmware
https://drive.google.com/file/d/0BzyeAt2hy6XeLXVwMVFVdW9yM1k/view
Click to expand...
Click to collapse
ok bro,
thank you very much but i mentioned above i already tried that file.
MICH_*** said:
ok bro,
thank you very much but i mentioned above i already tried that file.
Click to expand...
Click to collapse
i know bro , try this time to flash firmware with pit and see if it work with you or not
i want to ask you , can you boot up to recovery after flash firmware or not ?
shiko2007 said:
i know bro , try this time to flash firmware with pit and see if it work with you or not
i want to ask you , can you boot up to recovery after flash firmware or not ?
Click to expand...
Click to collapse
I'll flash it today when I'm home.
Yes I can, of course the stock recovery is installed now.
You need to install firmware via the 4 part binary method. Try the process below:
Download and run this:
Samfirm (on phone so having issues getting link, the software is on xda)
When you open the program, type the values given here;
Model: SM-G920F
Region: DBT
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run Odin
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone to your PC in download mode and click "Start" on Odin
Credit goes to @forumber2 foe this process, it seems to fix a lot of stock firmware flash fails.
So i tried rooting my galaxy a52 with twarp and odin i diwnload the compatible version of twarp and i flashed ut using ap, odin says the flash is successful but the thing is when rebooted instead of botting into twarp my phone boots into the diwnload mode over and over again, my bootloader is unlocjed btw… i can get it back by flashing its furmwares no problem in that but i want my phone rooted.
Alaa44 said:
So i tried rooting my galaxy a52 with twarp and odin i diwnload the compatible version of twarp and i flashed ut using ap, odin says the flash is successful but the thing is when rebooted instead of botting into twarp my phone boots into the diwnload mode over and over again, my bootloader is unlocjed btw… i can get it back by flashing its furmwares no problem in that but i want my phone rooted.
Click to expand...
Click to collapse
The guide clearly states you have to flah vbmeta disabler after recovery. Please read the entire guide again.
Ryzen5950XT said:
The guide clearly states you have to flah vbmeta disabler after recovery. Please read the entire guide again.
Click to expand...
Click to collapse
To flash it i need first tobe inside but the phone wouldn't boot into it
Alaa44 said:
To flash it i need first tobe inside but the phone wouldn't boot into it
Click to expand...
Click to collapse
no you dont, please read the guide attached to twrp download post again