[Completed] no service but got full bars cant make calls galaxy tab lite 3 - XDA Assist

when i got the phone it had problems when i reset it it would show that emergency call only and after a few resets it would work but since last year it didnt work so i downloaded a new rom and during odin flash the power went out so it was in the middle after a that i tried again then flashed in a new rom then nw it says no service and i dont knw what to do mt imei is there. PLZ HELP ME
PS.I GOT NO BACK UPS FOR ANYTHING

Thualni said:
when i got the phone it had problems when i reset it it would show that emergency call only and after a few resets it would work but since last year it didnt work so i downloaded a new rom and during odin flash the power went out so it was in the middle after a that i tried again then flashed in a new rom then nw it says no service and i dont knw what to do mt imei is there. PLZ HELP ME
PS.I GOT NO BACK UPS FOR ANYTHING
Click to expand...
Click to collapse
Hello and welcome to xda-assist,
we don't do technical support here we just redirect you the most suitable forum, so I ask you to refer to the general help section..
http://forum.xda-developers.com/android/help
Good luck

Related

[Q] i have a serious problem

Dear Sir
iam changing my phone sim 3times continue.
after that iam restarting my phone.
buy my phone hanged at samsung first screen,
after i am updating firm ware using odin.
but my phone not turn on.that is sucked at android factory reset window.
the error is cant unmount sdcard...etc
my phone model is samsung si9003
plz can you help me about my phone how to turn on as usual.
plz suggest me about upgrading.
or give any solution for me plz
phone help
dnchandana said:
Dear Sir
iam changing my phone sim 3times continue.
after that iam restarting my phone.
buy my phone hanged at samsung first screen,
after i am updating firm ware using odin.
but my phone not turn on.that is sucked at android factory reset window.
the error is cant unmount sdcard...etc
my phone model is samsung si9003
plz can you help me about my phone how to turn on as usual.
plz suggest me about upgrading.
or give any solution for me plz
Click to expand...
Click to collapse
It is very hard to understand what your exact problem is, I can suggest a Galaxy III for an upgrade. As far as your current phone...
I;m sure someone out there has had a problem close to yours, try YouTube and Google searching as well as educating yourself here (XDA) on anything related to your phone or similar problems.
You might find the info. you need in an unrelated post or video! Check your pins to see if they are worn or possibly broken (connections). Ensure that you are getting a clean and solid connection.
Good luck

[Resolved] [Q] No SIM and IMEI is null

Hello ,
My brother screwed my SGS3 , he connected it to Galaxy Tab 2 , and the SGS3 just got frozen , restarted it and it stuck at boot , on logo
We could manage to turn it on , but , it says there's no SIM card & IMEI is null
I've read some of the threads here but all of them say
Either do a back up , or give it to customer service center
1st , I don't have a back up , and it's not my fault , cause my brother did it , I was sleeping and he did all the things
2nd , I'm living in the 3rd world and we don't have a customer service center here , here they just sell yo the phone , when yo go outta the store , then it's all your problem if anything happens to the phone
So , any ideas for what to do except what I've mentioned ???
BTW , I've read in a thread someone said restore the custom ROM or something from
sammobile.com/firmwares
and the one who posted the thread said he tried it but didn't work too.
So , if there's any way to do it , I'll really appreciate it , and thanx in advance.
********************************************************************************************************************************************
The problem is solved , for whoever got this problem
just download the custom ROM from
sammobile.com/firmwares
choose your country , and do it with ODIN 1.8
It's working for me ^_^

[Q] Micromax funbook talk p362 touch not working

Hi frnds and experts...i hav a micromax funbook talk p362 tablet.My cousin had drawn the unlock patterns many times and it got locked, now the tablet asks to enter the email and pasword. I did that but nothing happened so i went to mobile shop and he hard reset the tablet and loaded the software again . But when he switched on the tablet its touch is not working..he says that an additional driver is missing .. How could i get that ... Plz experts help me....i shall be thankful to u all
Hello,
After a quick google, i found another thread on a forum where someone linked to a firmware. Apparantly after you flash it, it should work again.
ON the download link, one person says it worked another it doesn't. IF you don't mind flashing, i'll send you the link.
BTW. your tab doesn't work and you just take it back from the vendor if you still have warranty? You should have asked for another one, since you didn't unlock bootloader nor did you root.
Thanks
Jellybsly said:
Hello,
After a quick google, i found another thread on a forum where someone linked to a firmware. Apparantly after you flash it, it should work again.
ON the download link, one person says it worked another it doesn't. IF you don't mind flashing, i'll send you the link.
BTW. your tab doesn't work and you just take it back from the vendor if you still have warranty? You should have asked for another one, since you didn't unlock bootloader nor did you root.
Click to expand...
Click to collapse
thanks frnd bt can u tell me how can i download the driver from micromax official website... Because he was downloading it from the website.
Is it not posible to do without flashing
Is it not possible to make touch working without flashing my tablet. Can i get a password for micromax ftp servers
Rcy210 said:
Hi frnds and experts...i hav a micromax funbook talk p362 tablet.My cousin had drawn the unlock patterns many times and it got locked, now the tablet asks to enter the email and pasword. I did that but nothing happened so i went to mobile shop and he hard reset the tablet and loaded the software again . But when he switched on the tablet its touch is not working..he says that an additional driver is missing .. How could i get that ... Plz experts help me....i shall be thankful to u all
Click to expand...
Click to collapse
That person has flashed wrong firmware on your device...
Try this http://www.4shared.com/rar/j57Q3MJ6/Micromax_P362.html
Flash this ..
And then it will work.. properly :good:
BTW I also have he same tab and had this problem some months ago..
cant flash
i tried to flash by using tis tool but device is not conecting to updaTE FIRMWARE.my funbook p362 is not startingup.when switch on my tab it displays mmmx logo then goes black screen.after tat when i press unlock button it displays homescreen for a second and once again becomes black

Alcatel OT 918N idea 3g not getting incoming calls after rooting

Hi, i m javed
I need help i had rooted my friends ot918n idea 3g phone by following a guide on xda but since then i m facing problem, i m not getting incoming calls and i m unable to reset this phone, whenever i try to reset it boots into recovery and i tried 3 different roms 1stock n 2 custom and all the roms installed successfully but the phone gets stuck in boot screen after installing any rom. I tried to update it via one touch upgrade but always get network error dont knw why. And i also tried hard reseting it but i never get android logo with triangle it always goes into recovery.
After googling for two days for the solution i tried many things but no luck. I just want to install any stock or custom rom and phone should work fine so that i can give it back to my friend.
This is my last hope to get a solution from u guys.
Plz help me.....would appreciate a quik reply its urgent...
Need help plz reply.......

[Completed] acre e39 single sim help

Im in deep problem and im unable to solve
its about my acer liquid e39 and just to make it clear im a nood to the whole flashing of android
now wat happen i have a habit to always keeping the settings( unknown sources ) on
the the other day i download a antivirus for my phone named (e mobile security and antivirus) from a torrent site
it worked grate but then i realized the the licences expired from 2014 so i decided try and download a new one
well i was hoping i could fined one in which i did.
now after i downloaded it i placed it in (Android Data com.eset.ems2 ) folder
any way after doing so the antivirus keep tell me the the downloaded file was a molar so i ignore it and poof that wen the phone start acting up things starts to force close and the phone start to restart by it self i have tried
uninstall an remove the program
factory reset the pone and the virus was still there thats wen the idea to flash a different single sim stock ROM
not realizing i should have backed up the original ROM
ive download a stock rom from (xda) did 3 times yep 3 times and a triple sim stock ROM also
after using the sptool to flash on the stock rom
Firmware (Acer_AV0K0_E39_1.011.00_EMEA_GEN1S )when it was done i unplug the usb and turnd on the phone it took awhile then i saw the welcome screen i sow so glad to see it :good: until i touched the screen trying to press next nothing happen
1. the touch was not working at all but it detect my sim card
i flash the phone 3 times and got the same problem
i open the sp flash tool to flash (Acer_AV0K0_E39_1.019.00_EMEA_CUS1)
Saw the welcome screen and the touch was working very well after finishing the set up the phone is telling me
2. Invalid imei
3. No sim card detected in slot 123
yet the card is in the phone and wen i remove the card the phone is saying( sim1 has been changed, the phone will restart immediately)
can someone plz help me fix the issues im having:crying::crying::crying:
Hello and thank you for using XDA Assist,
please create a thread here:
Android Q&A, Help & Troubleshooting
I hope there will be someone, who is able to help you.
Kind regards
Trafalgar Square
XDA Assist

Categories

Resources