Soft Bricked galaxy s7 (t-mobile) - T-Mobile Samsung Galaxy S7 Questions & Answers

I am so sorry if this has been posted before but i cannot find an answer. I have a tmobile galaxy s7 SM-G930T. I am trying to unroot the device so that i can send it in for a repair to the antenna. I keep getting an error when flashing the stock firmware in odin this is the string i am getting.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1101)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This happens in the prince comsie version and the other. I am making sure that it is the right stock firmware. any help is appreciated, thanks in advance.

b0bby22545 said:
I am so sorry if this has been posted before but i cannot find an answer. I have a tmobile galaxy s7 SM-G930T. I am trying to unroot the device so that i can send it in for a repair to the antenna. I keep getting an error when flashing the stock firmware in odin this is the string i am getting.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1101)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This happens in the prince comsie version and the other. I am making sure that it is the right stock firmware. any help is appreciated, thanks in advance.
Click to expand...
Click to collapse
Factory reset in the recovery first.

KillerClaw321 said:
Factory reset in the recovery first.
Click to expand...
Click to collapse
When i try to do this. (I tried this before) I am getting a "E: failed to mount /preload (No Such file directory). However it still does not flash after trying. however when flashing it gives this string now
.<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1101)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

b0bby22545 said:
When i try to do this. (I tried this before) I am getting a "E: failed to mount /preload (No Such file directory). However it still does not flash after trying. however when flashing it gives this string now
.<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1101)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I know this sounds weird but try flashing the At&t PK1 firmware and then after you should be able to go right back into odin and flash the PK1 firmware from T-Mobile.
EDIT: Just make sure you factory reset in recovery after you flash the at&t firmware.

Try using the latest official version of Odin. I have read that some people have had issues fishing stock firmware with the prince version of Odin.

KillerClaw321 said:
I know this sounds weird but try flashing the At&t PK1 firmware and then after you should be able to go right back into odin and flash the PK1 firmware from T-Mobile.
EDIT: Just make sure you factory reset in recovery after you flash the at&t firmware.
Click to expand...
Click to collapse
this even isnt working i get this.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Related

[Completed] Galaxy s5 g900a soft brick HELP

Trying to flash stock rom and odin keeps failing
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_G900AATT1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Error on the device is
sw rev check fail : [aboot]Fused 3 > Binary 1
Please HELP!!!
Hi, thank you for Uganda XDA Assist. Are you flying the correct stock firmware? Generally Samsung sites not let you flash an earlier version so check that you're flashing the save version you were on. The best place to get help is here,http://forum.xda-developers.com/showthread.php?t=2697270. Also see this,http://forum.xda-developers.com/att-galaxy-s5

Please help odin error s8+ g9550

my phone stuck at samsung logo while updating to oreo, then i tried to upgrade it using odin its keep give me error. please help me to fix it,, TIA
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf.lz4
<ID:0/003> Complete(Write) operation failed.
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try with odin 3.13

Trying to Flash ROM from a SM-J327A to SM-J327U

Hi,
I am trying to flash a stock rom (Sm-j327u) to an unlocked ATT Galaxy J3 (sm-j327a). I downloaded ODIN and downloaded the firmware files and connected the phone and put it in download mode and did all that. I add each file to odin according to AP, CP etc.. Well I press start and it fails. Trying to enable WIFI calling and VoLTE with tmobile SIM.
here is the info it gives me:
<ID:0/007> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Anything I'm missing? Can the ATT J3 even be flashed with the unlocked firmware version? all the tutorials on here make it seem that its super easy to do.
Thex415 said:
Hi,
I am trying to flash a stock rom (Sm-j327u) to an ATT Galaxy J3 (sm-j327a). I downloaded ODIN and downloaded the firmware files and connected the phone and put it in download mode and did all that. I add each file to odin according to AP, CP etc.. Well I press start and it fails. Trying to enable WIFI calling and VoLTE with tmobile SIM.
here is the info it gives me:
<ID:0/007> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any help is appreciated.
Click to expand...
Click to collapse
Signature is invalid as far as the bootloader is concerned. You can only flash roms that is made for your specific device which happens to be J327A. Oh the J327U is the international version of this device. The J327T is tmobile.
thepcwiz101 said:
Signature is invalid as far as the bootloader is concerned. You can only flash roms that is made for your specific device which happens to be J327A. Oh the J327U is the international version of this device. The J327T is tmobile.
Click to expand...
Click to collapse
Nothing can be done? I have a tmobile sim on the sm-j327a and trying to make the wifi calling and volte work on the phone.
Ok so i used a modified version of Odin for the SHA issue. Then i tried again with a TMO firmware then I get this error.
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/006> Added!!
<ID:0/006> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So I guess its the bootloader preventing this? Is there some modified version of the SM-J327a that can let me use VOLTE and WIFI calling with a Tmobile sim ??
Thex415 said:
Ok so i used a modified version of Odin for the SHA issue. Then i tried again with a TMO firmware then I get this error.
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/006> Added!!
<ID:0/006> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So I guess its the bootloader preventing this? Is there some modified version of the SM-J327a that can let me use VOLTE and WIFI calling with a Tmobile sim ??
Click to expand...
Click to collapse
nope sorry in order to use wifi calling on tmobile you have to get a tmobile phone.
thepcwiz101 said:
nope sorry in order to use wifi calling on tmobile you have to get a tmobile phone.
Click to expand...
Click to collapse
Oh well. Thank you for your answers!! I appreciate it.
Thex415 said:
Oh well. Thank you for your answers!! I appreciate it.
Click to expand...
Click to collapse
no problem
Thex415 said:
Oh well. Thank you for your answers!! I appreciate it.
Click to expand...
Click to collapse
VOLTE is usually enabled in the CSC. You can try and flash everything but BL or just CSC. YMMV.
Thex415 said:
Ok so i used a modified version of Odin for the SHA issue. Then i tried again with a TMO firmware then I get this error.
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/006> Added!!
<ID:0/006> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So I guess its the bootloader preventing this? Is there some modified version of the SM-J327a that can let me use VOLTE and WIFI calling with a Tmobile sim ??
Click to expand...
Click to collapse
Try SM-J337A but I'm having a hard time finding it, tmobile and metropcs are same ISP
Gamer110592 said:
Try SM-J337A but I'm having a hard time finding it, tmobile and metropcs are same ISP
Click to expand...
Click to collapse
any device model above J327 is the 2018 version of the J3. J327 devices must be flashed only with J327 firmware. Higher model numbers have different motherboards i believe.
thepcwiz101 said:
any device model above J327 is the 2018 version of the J3. J327 devices must be flashed only with J327 firmware. Higher model numbers have different motherboards i believe.
Click to expand...
Click to collapse
Okay but motherboards and firmware are two different things. No one has proved the the J337 firmware won't go into the J327 yet. But the writer of the page wanted to enable wifi calling and was using an AT&T SIM card. Here's what I know of. I have two J327ts that are unlocked. On one I have a T-Mobile varient for cell service the other has AT&T service. n the T-Mobile I can use the wifi calling. On the AT&T I cannot use wifi calling. The feature is on the phone, it is AT&T that is not useing the service and therefore you do not get it.

is my n8000 dead?

hy guys.
i have all known problem with my n8000.
tried almost everything.tablet stuck in odin mode(at least is alive and detected on pc)
trided flashing with OFW:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXSDQA4_N8000OXXDNL1_N8000XXUDNH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
so added PIT file,and add individual AP,BL and CP from one OFW: re-partition checked
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N8000XXUDNH2_2451855_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N8000XXUDNH2_2451855_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N8000XXUDNH2_REV_00_CL1603814.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
same as before,but: re-partition unchecked
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N8000XXUDNH2_2451855_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N8000XXUDNH2_2451855_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N8000XXUDNH2_REV_00_CL1603814.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
also tried just AP and PIT..
have anyone tried anything else that works?
or can we just say that eMMC is dead?
This can be a stupid question, I know, but happened to me.
Did ur volume up button got stuck?
I got this problem trying to pass SafetyNet with my 10.1. Unfortunately, I almost lose my vol up button hahahahaah. Trying to pass SafetyNet is my nightmare.
yes its really stupid question joke
no,up button is not stuck.
tried flashing hidden.img.tar and it is succesfull.
in some cases tuck at <ID:0/004> SetupConnection..

SM-A307GN/DS

After taking a long time odin says "FAIL". Tried everything i could find on Google.
and it stuck on DOWNLOADING... and says>
vbmeta: error verifying vbmeta image ok not signed (3)
custom vbmeta
vbmeta: no sign info
vbmeta ,
Downloaded 3 STOCK ROMS and tried to install every time it FAILS.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_A307GNDXU2ASK3_CL16657552_QB27558351_REV00_user_low_ship_meta_OS9.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_A307GNDXU2ASK3_CL16657552_QB27558351_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_A307GDXU2ASK3_CP14490299_CL16657552_QB27558351_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OMC_OLM_A307GNOLM2ASK3_CL16657552_QB27558351_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin.lz4
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please HELPP!!!!
Rajab Alee said:
After taking a long time odin says "FAIL". Tried everything i could find on Google.
and it stuck on DOWNLOADING... and says>
vbmeta: error verifying vbmeta image ok not signed (3)
custom vbmeta
vbmeta: no sign info
vbmeta ,
Downloaded 3 STOCK ROMS and tried to install every time it FAILS.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_A307GNDXU2ASK3_CL16657552_QB27558351_REV00_user_low_ship_meta_OS9.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_A307GNDXU2ASK3_CL16657552_QB27558351_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_A307GDXU2ASK3_CP14490299_CL16657552_QB27558351_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OMC_OLM_A307GNOLM2ASK3_CL16657552_QB27558351_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin.lz4
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please HELPP!!!!
Click to expand...
Click to collapse
Sorry for late reply,
You can try redownloading your phones rom through frija - https://forum.xda-developers.com/attachments/frija-v1-4-3-zip.5129367/
And pls tell me your phone name ill try if there is any other way
OEM is locked

Categories

Resources