Hi,
I tried to install ViPER4Android_FX_v2330 on stock via philz cwm.
Every downloaded file give me 'signature verification error' and zip installation aborts.
What em i doing wrong ?
Just install the apk
Facing error"error executing updater binary in zip" ( 12.1.1 YOG7DAS2K1) Oneplus one
I tried wiping Data, Cache, System and then after flashing above update it says flashing failed.
Following are the details of my Oneplus one
TWRP : 2.8.7.0
CyanogenMod Version: 12.1-YOG4PAS3JL
Build Number: LMY48B
Device model- A0001
need a solution.
yeah same with me. Weird thing is it just says Error! nothing else is printed on the screen
I have found a solution for this problem.
You can follow this step:
1) Instead of downloading 65.8 MB incremental file go to cyanogen -support website( Sorry couldn't paste the link as i am new user) search for your device and you will find a link which will download the latest complete rom. This rom is of around 700mb.
2) Copy this downloaded rom mentioned above to ur device.
3) Take a Backup
4) Wipe Data, Cache,System or Simply just do factory reset with the help of TWRP
5) Install the Rom using TWRP
6) Reboot and finally your device will be updated and there will be no error.
it worked for me.
Hi,
I want to root a karbonn sparkle v, what is running android 6.0.1
I started android my wife one toolkit 1.2.1 then press list devices, then root. It said copying update.zip to androd. Then it rebooted, I see the now (temporary) bootloader, it said select the update.zip but I does not find on the sdcard. So I changed to apply update from adb, then on the pc I searched the update.zip used adb sideload update.zip command. Then it seems it is installedd successfully. But after that point I cannot boot sparkle v anymore. It stopps at the beginning where the circles spinning.
I tried to download sp flash tool, and flash a stock firmware, but the flastool does not recognize my wifes phone (as it does not recognize my working phone).
I can access the stock recovery (vol up+power) and then select recovery, then i can access the android recovery, i downloaded the 015427.zip copyed to the sdcard. Select Apply update from SD card. It wites:
PHP:
Supported API: 3
-- Install /sdcard/update.zip
Finding update package...
Opening update package...
Verifying update package...
Can't install this package (Thu Sep 24 22:31:53 URC 2015) over newer build (Tue Mar 29 23:27:39 UTC 2016).
E:Error in /sideload/package.zip
(Status 7)
Installation abborted.
What can I do to make the phone working again?
regards
HyGy
I successfully installed CWM in fastboot mode, then I installed the update.zip from the sdcard with CWM. (flushed data, and installed).
I have a running android 6.0 it check for update and the first update is installed successfully.
Is there any disadvantage using the CWM? If yes, then I how can I put back the stock bootloader?
I have same problem, plz provide detail step on how to flash it
hygy said:
I successfully installed CWM in fastboot mode, then I installed the update.zip from the sdcard with CWM. (flushed data, and installed).
I have a running android 6.0 it check for update and the first update is installed successfully.
Is there any disadvantage using the CWM? If yes, then I how can I put back the stock bootloader?
Click to expand...
Click to collapse
Please help me as im having same trouble. please provide steps on how to install cynogen mode. Im new to these development.
I had the same problem, i used Android One Toolkit, and my sparkle V was stuck with boot looping for around 2-3 hrs. I then tried to use SP flash tool to flash it with android 4.4.2 available. However, in switched off mode, my phone was not detected. And it took me to install few drivers (some around 7-8) that i found after searching the google! And SP tool was somehow able to detect after that. I am not sure which one driver actually worked. It took some 10 minutes to flash once the phone was detected by the SP tool. Thus, i suggest you try with few drivers that are available and wait until your phone is recognized by the computer.
I used my SD card as internal drive in my phone. Maybe that was the problem while working with Android One Toolkit. As it required a SD card to use the update.zip. Probably it was not recognized as SD card anymore as my SD card was configured as internal storage. That is my guess why i got stuck with boot looping.
hygy said:
Hi,
I want to root a karbonn sparkle v, what is running android 6.0.1
I started android my wife one toolkit 1.2.1 then press list devices, then root. It said copying update.zip to androd. Then it rebooted, I see the now (temporary) bootloader, it said select the update.zip but I does not find on the sdcard. So I changed to apply update from adb, then on the pc I searched the update.zip used adb sideload update.zip command. Then it seems it is installedd successfully. But after that point I cannot boot sparkle v anymore. It stopps at the beginning where the circles spinning.
I tried to download sp flash tool, and flash a stock firmware, but the flastool does not recognize my wifes phone (as it does not recognize my working phone).
I can access the stock recovery (vol up+power) and then select recovery, then i can access the android recovery, i downloaded the 015427.zip copyed to the sdcard. Select Apply update from SD card. It wites:
PHP:
Supported API: 3
-- Install /sdcard/update.zip
Finding update package...
Opening update package...
Verifying update package...
Can't install this package (Thu Sep 24 22:31:53 URC 2015) over newer build (Tue Mar 29 23:27:39 UTC 2016).
E:Error in /sideload/package.zip
(Status 7)
Installation abborted.
What can I do to make the phone working again?
regards
HyGy
Click to expand...
Click to collapse
https://m.youtube.com/watch?v=W9Co-2QBRZU
watch this video how to flash properly the stock firmware
and this https://m.youtube.com/watch?v=rVXCn...b2hpdCBzaGFybWE=&hl=en&client=mv-google&gl=IN and this for drivers
"This package is for A0001, this device is bacon." Wiped internal storage, cant flash
Like an idiot, I accidentally wiped internal storage while trying to flash a new ROM, so all my data ( which I dont care about ) and my backup images got deleted. I still have access to TWRP so I thought it wasnt that bad and went ahead installing ROMS as I usually would.
I transferred the zip files from PC to the phone via adb push method and tried to flash
However, I an unable to install any ROM as it gives me an error every time. This is what the error message reads:
Skipping MD5 check : no MD5 file found
This package is for device: A0001; this device is bacon
E: Error executing updater binary in zip ' /sdcard/cm...(name of the rom here).zip '
Error flashing zip ' /sdcard/(nameofrom).zip '
I did quite a bit of research and read on one of the official OnePlus that all the ROMs are signed for the device A0001 but the device itself reads itself as bacon, which is its codename. Since "bacon" != "A0001" the zip installation fails.
Am I stuck with an expensive paperweight here? Please help.
TLDR: Wiped internal storage, No OS, flashing throws up error every time
If you can acces TWRP, just by connecting the OPO to your PC should give you acces to storage. I guess that you are trying to install H2OS, download the fixed version with the updater-script fixed. If it gives you this error with another rom, just download another custom rom and put in on the internal storage or flash the stock OS with fastboot
KuranKaname said:
If you can acces TWRP, just by connecting the OPO to your PC should give you acces to storage. I guess that you are trying to install H2OS, download the fixed version with the updater-script fixed. If it gives you this error with another rom, just download another custom rom and put in on the internal storage or flash the stock OS with fastboot
Click to expand...
Click to collapse
Yep, inside the rom zip, there is a file called updater-script.
In this file, there is a line checking the phone name.
While most of the roms are using "bacon", H2OS original zip file uses "A0001" instead.
Can you try with any other rom?
niranjanbhat said:
Like an idiot, I accidentally wiped internal storage while trying to flash a new ROM, so all my data ( which I dont care about ) and my backup images got deleted. I still have access to TWRP so I thought it wasnt that bad and went ahead installing ROMS as I usually would.
I transferred the zip files from PC to the phone via adb push method and tried to flash
However, I an unable to install any ROM as it gives me an error every time. This is what the error message reads:
Skipping MD5 check : no MD5 file found
This package is for device: A0001; this device is bacon
E: Error executing updater binary in zip ' /sdcard/cm...(name of the rom here).zip '
Error flashing zip ' /sdcard/(nameofrom).zip '
I did quite a bit of research and read on one of the official OnePlus that all the ROMs are signed for the device A0001 but the device itself reads itself as bacon, which is its codename. Since "bacon" != "A0001" the zip installation fails.
Am I stuck with an expensive paperweight here? Please help.
TLDR: Wiped internal storage, No OS, flashing throws up error every time
Click to expand...
Click to collapse
Instead of using adb push metod try to flash stock rom (https://forums.oneplus.net/threads/oxygenos-2-1-4-for-the-oneplus-one.425544/) and then flash the rom you want.
Good luck!
Note: You will loose twrp, so you have to flash it via fasboot [fastboot flash recovery (recovery name).img]
I'd suggest you to start over with a clean flash of COS13 fastboot factory image. Sounds like you are on a very old base.
Try to reboot TWRP and flash again. Or remove that check string from the updater-script.
download CM11 factory recover tool from my google drive @ https://drive.google.com/open?id=0ByfGPjP5zNYSTDZZcXZpLU44Q00 and install drivers and go to fastboot and plug in the phone and run recovery tool to push default factory image then install whatever CM version you want directly
No updater-script file that I can see
Can't find that file!
Anghirrim said:
Yep, inside the rom zip, there is a file called updater-script.
In this file, there is a line checking the phone name.
While most of the roms are using "bacon", H2OS original zip file uses "A0001" instead.
Can you try with any other rom?
Click to expand...
Click to collapse
use usb otg, success each time!
setup on ubuntu
Instructions for install on linux (test on ubuntu)
1- install adb :
Code:
$ sudo apt-get install android-tools-adb
2- install fastboot :
Code:
$ sudo apt-get install android-tools-fastboot
3- Turn the phone off. Then boot it into fastboot mode by holding volume up + power. The phone will display "fastboot" text indicating that it has successfully entered fastboot mode.
4- test if the phone is detected with the cmd :
Code:
$ fastboot devices
5- unlock bootloader (/!\ it wipe the phone) :
Code:
$ sudo fastboot oem unlock
6- install TWRP :
- go to the path where is the img
Code:
$ cd path/to/twrp/folder/
- rename the image to twrp.img
Code:
$ mv old_name.img twrp.img
- flash the recovery
Code:
$ sudo fastboot flash recovery twrp.img
/!\ Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually turn it off by pressing and holding power button until it switches off. Now to enter your newly installed custom recovery, hold volume down + power. The phone should boot into recovery mode. Now that you have a custom recovery, you may continue to the final step. /!\
7- install custom/official ROM with TWRP :
- Wipe > Swipe to Factory Reset
- Install > browse to the location where you previously copied the ROM zip and select it > Swipe to confirm the installation
- Install GApps using same process as ROM, then reboot. (optionnal: the official OnePlus ROM come with GApps pre-installed)
Possible errors with official ROM :
"This package is for device: A0001; this device is bacon" or "This package is for device: OnePlus; this device is A0001" or other similar
==> go into the ROM zip file, in "/META-INF/com/google/android/" there is an "updater-script" file. Open it, locate the expression ' getprop("ro.build.product") == "A0001" ' and replace the "A0001" by the device name you have. Replace the file in the archive. Note : after that, you can't verify the official MD5 !
- example : "This package is for device: A0001; this device is bacon", the ' getprop("ro.build.product") == "A0001" ' become getprop("ro.build.product") == "bacon" '
Sources :
https://forums.oneplus.net/threads/...oader-install-custom-recovery-and-root.64487/
https://forum.xda-developers.com/oneplus-one/help/package-a0001-device-bacon-wiped-t3457766
Oneplus one Oxygen Installation error using TWRP
niranjanbhat said:
Like an idiot, I accidentally wiped internal storage while trying to flash a new ROM, so all my data ( which I dont care about ) and my backup images got deleted. I still have access to TWRP so I thought it wasnt that bad and went ahead installing ROMS as I usually would.
I transferred the zip files from PC to the phone via adb push method and tried to flash
However, I an unable to install any ROM as it gives me an error every time. This is what the error message reads:
Skipping MD5 check : no MD5 file found
This package is for device: A0001; this device is bacon
E: Error executing updater binary in zip ' /sdcard/cm...(name of the rom here).zip '
Error flashing zip ' /sdcard/(nameofrom).zip '
I did quite a bit of research and read on one of the official OnePlus that all the ROMs are signed for the device A0001 but the device itself reads itself as bacon, which is its codename. Since "bacon" != "A0001" the zip installation fails.
Am I stuck with an expensive paperweight here? Please help.
TLDR: Wiped internal storage, No OS, flashing throws up error every time
Click to expand...
Click to collapse
check this post
wirelessindeed.blogspot.com/2017/07/oxygen-installation-error-on-oneplus.html
Update TWRP Recovery
I know this is an old post, so this is here in case anyone finds it in the future and requires help...
My mate asked me to upgrade his OnePlus (original, codename Bacon) and I received this error when upgrading from LineageOS 14.1 to 15.1.
To resolve, its extremely easy - simply upgrade the TWRP recovery. My mate originally had TWRP 3.1.1.0 installed, but the latest weekly LineageOS 15.1 required v3.2.3.0 installed which resolved the error message "This package is for device: bacon, a1001. this device is ."
Either Vol+ and Power to enter bootloader, or from command line:
adb reboot bootloader (with Android USB debugging turned on. You can test for connection using command "adb devices" and if successful it should show your phone's serial number). You will need to trust the computer's connection on your phone. To get to Android USB Debugging, you need to go Settings -> Developer menu options, and if you can't see that: Settings -> About Phone and tap "Build" 7 times for developer mode to appear.
Once phone goes into bootloader mode, type:
fastboot flash recovery "path:\twrp-x.x.x.x-bacon.img" (obviously path is the directory that the recovery is stored in, and x.x.x.x will be replaced with the version you've just downloaded. At time of writing, v3.2.3.0 is the latest. You can always use "fastboot devices" if you used Vol+ and Power to enter bootloader to ensure you have a valid connection, in USB debugging mode on your phone and correct Android adb drivers installed in Windows.
Wait until it's succeeded, and turn off phone. Now go into recovery and try again - and this time you should be good to go!!!
All the above implies your bootloader is unlocked. If you need to unlock your bootloader, there are plenty of instructions telling you how to do this - but HAVE A BACKUP as unlocking your bootloader will do a factory reset on your phone.
Hope this helps someone
......mmmmmm BACON!!!
Device Information: Redmi 3S Prime - 3GB - 32GB - 6.0.1 Marshmallow
Bootloader is unlocked and phone is rooted. I used TWRP, Magisk and lazyflasher and verified with Root Checker app.
Now I am trying to install lineage-16.0-nightly-land via adb sideload and getting error as shown in the screenshot [https://imgur#com/X16jONh]. Let me know if it is not readable I will write it here.
Basically it is showing
E1001: Failed to update system image.
Updater process ended with ERROR: 7
These are the steps I have followed:
1) Unlocking bootloader this was just standard.
2) After that to root the phone I did
2.1) `fastboot flash recovery recovery.img`
2.2) `fastboot boot recovery.img`
2.3) Wiped "Wipe->Advance Wipe->Cache"
2.4) Installed "no-verity-opt-encrypt-6.1.zip" (downloaded from [https://build.nethunter#com/android-tools/no-verity-opt-encrypt/)
2.5) Got error similar to above "E1001: Failed to update system image. Updater process ended with ERROR: 7". I ignored this error and moved on to install Magisk.
2.6) Successfully Installed Magisk.
2.7) Rebooted the phone. Installed Root Checker from playstore and confirmed that the phone is rooted.
3) Flashing lineageos
3.1) Wiped "Wipe->Advance Wipe->Cache, Dalvik Cache, System, Data"
3.2) Tried installing lineageos and got error similar to above "E1001: Failed to update system image. Updater process ended with ERROR: 7"
3.3) I then tried the adb sideload method. First I checked if my device is being listed by doing `adb devices` on terminal. It was being listed.
3.4) Then I formatted the data as instructed here [https://wiki.lineageos#org/devices/land/install#installing-lineageos-from-recovery]
3.5) “Advanced”, “ADB Sideload”, then swiped to begin sideload.
3.6) Did `adb sideload lineage-16.0-20200715-nightly-land-signed.zip` and got the error as shown on the image link [https://imgur#com/X16jONh]
What should I do to resolve this error? Please Help.
Please let me know if any other detail is required.
Since I am new user, I am not allowed to post links. As a workaround I have replace .com and .org with #com and #org. Please correct them. Sorry for the trouble.