ssojyeti2 said:
Hey guys, little update. Was able to get V4A to process SoundCloud using this magisk module:
https://forum.xda-developers.com/apps/magisk/module-universal-deepbuffer-remover-t3577067/page32
Click to expand...
Click to collapse
hjjiang said:
For ppl using SuperSU + ARISE, i have installed the above: acp_1.4 with the remove option (vol down) for the latest SoundCloud (2018.4.17) to work
Click to expand...
Click to collapse
Hey people, I hacked Soundcloud to work with Viper4Android.
Since Soundcloud uses its own built-in media player, V4A could not process its music. I fixed that!
I plan on updating this thread for every new stable release. Don't ask me to mod the beta versions. Enjoy:good:
Version: 2017.05.30-release
Easy Method (not recommended)
Use this modded soundcloud apk. Profit.
Warning: Offline playback does not process with V4A with this apk. I'm trying to fix this
Warning 2: If you use this method, streaming cache gets broken in Soundcloud. Which is why I recommend scrolling down just a tad more
...................................................................................................................................................................................................................................................................................
Since for some reason I only took one post when I made this thread, let's just act like post #2 starts here
Alternate (BETTER) Method
Soundcloud V4A processing can be fixed by modifying /system/ect/audio_policy.conf (HUGE thanks to @DKnightX91 for the tip)
Open your audio_policy.conf (each device's file is different, so for now there's no one fix all) and remove these lines:
Code:
low_latency {
AUDIO_DEVICE_OUT_EARPIECE|AUDIO_DEVICE_OUT_SPEAKER|AUDIO_DEVICE_OUT_WIRED_HEADSET|AUDIO_DEVICE_OUT_WIRED_HEADPHONE|AUDIO_DEVICE_OUT_ALL_SCO|AUDIO_DEVICE_OUT_AUX_DIGITAL
flags AUDIO_OUTPUT_FLAG_FAST }
*lines may vary based on device. Just remove everything between the 'low_latency' brackets
Then, you can use regular Soundcloud from the play store with V4A.
Edit: Newer roms don't seem to use the audio_policy.conf, so if you're unable to locate that file, I inquire that you refer to this post. It seems that deep_buffer causes issues with V4A and removing it properly can fix it.
Thanks for this, I don't really use Soundcloud but now this is here I might have to in the future
thanks for this, thread subscribed =) been wanting this for a while now
I have found a version of V4A 2.5.0.5 by guitardedhero which somehow works for me with default soundcloud.
Even on Nougat.
Tested it on bacon and hammerhead both same result
Awesome, tested here with my RR 5.7.4 and it worked like a charm, thank you
I use soundcloud too much. And will use even more now!
U are my hero I tried to get soundcloud to work with v4a for ages as i use it a lot (probably like the one above me xD)
Nice! Really nice! Just gonna try if navbar equalizer module works with it
Holy Crap, it works!!! Thank you soo much mate:laugh::good:
henrikh1998 said:
I have found a version of V4A 2.5.0.4 by guitardedhero which somehow works for me with default soundcloud.
Even on Nougat.
Tested it on bacon and hammerhead both same result
Click to expand...
Click to collapse
Same here, on op3 AOSiP.
While v4a does not work with any music app except oneplus music on Oxygen (based) op3 roms. Maybe this helps in that scenario.
On HTC 10 viper 5.4 all ok thank you
henrikh1998 said:
I have found a version of V4A 2.5.0.4 by guitardedhero which somehow works for me with default soundcloud.
Even on Nougat.
Tested it on bacon and hammerhead both same result
Click to expand...
Click to collapse
Link? I'd love to try it out. Would've spared me some time hahaha
ssojyeti2 said:
Link? I'd love to try it out. Would've spared me some time hahaha
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=69154518&postcount=809
This is a post i created in a bacon rom thread.
First flash zip file from first link, then update the via zip installed v4a app with the apk in second link.
For me Soundcloud works with this setup on bacon and hammerhead both 7.1.1.
Remember to have Selinux on permissive to make V4A working at all.
Wait...This is a modded SoundCloud? How does this work?
Thanks so very much, now I have soundcloud working with Dolby Atmos ?
Great work.
zeeBomb said:
Wait...This is a modded SoundCloud? How does this work?
Click to expand...
Click to collapse
Just install as a regular apk, profit :highfive:
OMG! Finally my Boomsound on HTC 10 working with SoundCloud... Thanks you.
Thanks so much!! This used to be my old method, which has since stopped working https://forum.xda-developers.com/showpost.php?p=61697941&postcount=4
:good:
Still not working on Google Pixel 7.1.1. I don't understand why SoundCloud needs to use its own player. Xposed and SoundCloud not processing were some of the main reasons I didn't want to go to Nougat.
Works perfectly, but when you decide to download the music for SoundCloud Go, it stops processing and only processes what's streamed. Any chance you could look into this?
Sent from my Nexus 6P using Tapatalk
Curiousn00b said:
Works perfectly, but when you decide to download the music for SoundCloud Go, it stops processing and only processes what's streamed. Any chance you could look into this?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
could u get me a log of the error?
Related
Deleted/Expired
..
If You created a new thread with other member's job's, at least press the thanks in the original thread.
Zoja said:
If You created a new thread with other member's job's, at least press the thanks in the original thread.
Click to expand...
Click to collapse
so glad this still works on lollipop!!
missed the stereo pan as my headphone socket seems to send more sound to the right headphone lolol!!
..
Can I flash rom on 4.4.4?
Thank You
ingwye said:
Can I flash rom on 4.4.4?
Thank You
Click to expand...
Click to collapse
Unfortunately, only the "Original Holo" variant will work on Kitkat, none of the Material ones will work.
Besides, this is not a ROM :laugh:
nice version...thx
like the material design
works on HTC one M7 with 5.0.2
Link the original thread please the dark version? I will ask the developer to create a version with pure black.
GiRaFa-SAMA said:
Link the original thread please the dark version? I will ask the developer to create a version with pure black.
Click to expand...
Click to collapse
All links to the original thread's are in the "Credits" section, click their user name.
If the original developer rejects to make a pure black version then I will consider just making it my self
Thank GOd, I waited for this so long.
Thank GOd, I waited for this so long.
Works superbly in Cataclysm rom Nexus 5, thank you!
For me it is not working:
In Driver status it says: "Processing: No"
I just installed the apk and wanted to try some options. I am on N5 with Optipop and Uber L
does the apk method work on nexus 4 stock non-rooted?
@Viper4713 Not working for me on s5 MOAR 5.0
And if I change it to compatible mode I get fc on soundalive and it freezes up. Causing me to have to uninstall it and reinstall.
But no effect on any music playback
JoeyDuran said:
@Viper4713 Not working for me on s5 MOAR 5.0
And if I change it to compatible mode I get fc on soundalive and it freezes up. Causing me to have to uninstall it and reinstall.
But no effect on any music playback
Click to expand...
Click to collapse
What music player are you guys using? Also remember Permissive mode is a must not optional, even after driver installation permissive mode is still needed for full use.
Thanks for this great theme.
Sent from my HTC One_M8 using Tapatalk
Viper4713 said:
What music player are you guys using? Also remember Permissive mode is a must not optional, even after driver installation permissive mode is still needed for full use.
Click to expand...
Click to collapse
I had everything set, that was a screenshot after reinstall
I used spotify and no effect. Play music wouldn't play at all when I had it enabled and set to compatible. It just fc soundalive and said playback was temporarily unavailable
Thanks. It works and looks great on my TF700
Is there anyway to get v4a working on nouget? I tired the method the the regular s7 forum but it didn't work.
Look for Viper4Android V2.3.4.0 here on XDA (the one that works without the Selinux permission and has a higher audio fidelity than the newer versions and has the better UI IMO) then flash that puppy. Check if it works and if not you have to Google "Viper4Android on nougat" and it will give you a bypass that has you erase a stock audio file that prevents Viper4Android from working. This wasn't the case for me since I didn't have that file. The version I speak of has Dolby audio; I erased that because it just added more static IMO. I had this with the dual audio mod for a while but it didn't seem to make a difference but add more static.
If this works for you, please update the main post with credit to those sources. If you also want some settings for some Fire Audiophile experience, please ask; I run heavy bass that doesn't drown out music and makes Beats sound way better.
thowersome said:
Look for Viper4Android V2.3.4.0 here on XDA (the one that works without the Selinux permission and has a higher audio fidelity than the newer versions and has the better UI IMO) then flash that puppy. Check if it works and if not you have to Google "Viper4Android on nougat" and it will give you a bypass that has you erase a stock audio file that prevents Viper4Android from working. This wasn't the case for me since I didn't have that file. The version I speak of has Dolby audio; I erased that because it just added more static IMO. I had this with the dual audio mod for a while but it didn't seem to make a difference but add more static.
If this works for you, please update the main post with credit to those sources. If you also want some settings for some Fire Audiophile experience, please ask; I run heavy bass that doesn't drown out music and makes Beats sound way better.
Click to expand...
Click to collapse
Still doesn't work. Plz tell me how u got it to work on ur s7
What I did was start fresh and flash the stock modified bootloader and flashed the heavy Verizon debloater. Then I did the steps mentioned above, forgot to bring that up.
thowersome said:
What I did was start fresh and flash the stock modified bootloader and flashed the heavy Verizon debloater. Then I did the steps mentioned above, forgot to bring that up.
Click to expand...
Click to collapse
I just got it working using a different method. Thanks for the help though!
Please share for everyone else in your situation, and no problem
thowersome said:
Please share for everyone else in your situation, and no problem
Click to expand...
Click to collapse
I used this guide
https://forum.xda-developers.com/s7-edge/how-to/guide-viper4android-nougat-beta-t3499117
I downloaded this V4A zip and installed the apk inside. I did not install the Nougat IO test fix because I didn't need to. Everything works fine
http://www.mediafire.com/file/xonl4jha2e4vez1/ViPER4Android_FX_v2505.zip
I don't remember what post I found this link on, but it was here on XDA.
I am running Jrkruse's BS Free nougat. I followed his instructions at the link below, the only thing I added was flashing the engineering kernel as the last item in FlashFire and than rerooted.
https://forum.xda-developers.com/tmobile-s7-edge/development/rom-t3572739
I also have SE Linux Changer installed and have it set to Permissive.
Anyone had luck to get Dolby atmos working on this phone?
And if so please provide the steps you took
Thanks to all!
Freak07 said:
Anyone had luck to get Dolby atmos working on this phone?
And if so please provide the steps you took
Thanks to all!
Click to expand...
Click to collapse
Yes, straight from magisk module downloaded in it's manager app. Was using latest v13.x beta (manager v5+)
Only problem is.. could not get audio to route through usb->3.5mm adapter while atmos is enabled.
Sent from my htc_ocnwhl using XDA Labs
jhdmpp said:
Yes, straight from magisk module downloaded in it's manager app. Was using latest v13.x beta (manager v5+)
Only problem is.. could not get audio to route through usb->3.5mm adapter while atmos is enabled.
Click to expand...
Click to collapse
I get the latest Magisk and installed Le Pro 3 within the manager. It runs fine first but then it force closes after some reboots and I can never get it to work again. What should I do?
Albert Poon said:
I get the latest Magisk and installed Le Pro 3 within the manager. It runs fine first but then it force closes after some reboots and I can never get it to work again. What should I do?
Click to expand...
Click to collapse
I would try another version of it after removing the current one by booting to recovery and running the install script.
The one that worked best for me included both atmos 6.5 and viperx in one module, though I forget what it was named exactly within, magisk. You can find it by reading the descriptions if nothing else.
jhdmpp said:
I would try another version of it after removing the current one by booting to recovery and running the install script.
The one that worked best for me included both atmos 6.5 and viperx in one module, though I forget what it was named exactly within, magisk. You can find it by reading the descriptions if nothing else.
Click to expand...
Click to collapse
I reverted back to Magisk 12 and Le Pro 3 is working fine now
Is it a major difference in sound when using dolby? The sound in my u11 is ok from the speakers but it wasn't what i expected.
It really depends on how you are listening, what version you get working, and your subjective experience.
For me, using the version I described above, with a pair of Sony MR1BT (quite old now) there was a very significant positive difference. I could only get them to work through Bluetooth though.
I imagine that while using the speakers instead of headphones the positive change would be diminished significantly
This MOD is now Discontinued support for Oreo 5.02+ FW, please move your attention to @CrashOverride1995 post HERE
----------------
I originally found this mod from op5 thread by @pankajsammal post, and also few simular threat from other different oneplus device, but @pankajsammal post offers magisk module, so here I am sharing this beauty after a little cook myself for op5t.
Feature:
HEVC/H265 codec enable at Original OP5T bit-rate for all video and audio on Stock OOS camera app and GCam ported
4K 42Mbps
1080p 20Mbps
etc.
BUG:
**Incompatible with Viper4Android* Magisk module
@pankajsammal Original post link: HERE
ALL credit goes to @pankajsammal !!
Use it on your OWN RISK!!
changelog
update v2.1.1 @jkyoho
Original Bit-rate for op5t, tested on OOS4.7.6 stock camera app
-------------
Update V2.1- via @pankajsammal
Fix for slow motion crashing on modded google camera
The big "Use it on your OWN RISK!!" really does not want to make me try it.
How to install it ? from scratch please.
Can the phone read the video with the stock player ?
Tried it on ob1. Very nice. No crash. 4K=29sec=156mb. Zoom to focus works too. Stock cam v2.5.2 thank you
DoKaTSuYa said:
The big "Use it on your OWN RISK!!" really does not want to make me try it.
How to install it ? from scratch please.
Can the phone read the video with the stock player ?
Click to expand...
Click to collapse
you need a working Magisk on your phone
Easiest way: add this module from Magisk module "+" icon and locate the zip you downloaded.
And yes, stock galary player or any player should be able to playback since your 835 processor can do hevc work
I don't think it's works on OB1
dariett said:
I don't think it's works on OB1
Click to expand...
Click to collapse
Can you post screenshot Magisk Module and log?
jkyoho said:
Can you post screenshot Magisk Module and log?
Click to expand...
Click to collapse
Attached the screenshot of magisk... How I can save a log?
dariett said:
Attached the screenshot of magisk... How I can save a log?
Click to expand...
Click to collapse
Go to log section and pick Magisk and then top right save button
Thanks a lot
dariett said:
Thanks a lot
Click to expand...
Click to collapse
I just checked you log. Viper4AndroitFX also modified medoa_profiles.xml and other config of vedio setting. That's why it doesn't work for you
jkyoho said:
I just checked you log. Viper4AndroitFX also modified medoa_profiles.xml and other config of vedio setting. That's why it doesn't work for you
Click to expand...
Click to collapse
Ok thanks a lot I will try another version of V4A
jkyoho said:
I just checked you log. Viper4AndroitFX also modified medoa_profiles.xml and other config of vedio setting. That's why it doesn't work for you
Click to expand...
Click to collapse
Any way to revert this? I also have ViPER4Android installed and this Module don't work any More. I tried to installed ViPER4Android but the Problem is there
deves000 said:
Any way to revert this? I also have ViPER4Android installed and this Module don't work any More. I tried to installed ViPER4Android but the Problem is there
Click to expand...
Click to collapse
TRY UNINSTALL V4A old version and use v2.9 fron magisk module download.
I just did quick test from V4A magisk v2.9 . seems no effects on my hevc module ,but I am on Nogats not Oreo
OK i ll try and let you Know
Not work on Beta 2.
With witch app can I open log file to see if supported H265?
Sent from my iPad using Tapatalk Pro
paatha13 said:
With witch app can I open log file to see if supported H265?
Sent from my iPad using Tapatalk Pro
Click to expand...
Click to collapse
view video file property/info from VLC player or any player(stock player does not show detail )
NCC_1701 said:
Not work on Beta 2.
Click to expand...
Click to collapse
please upload your ORIGINAL /system/etc/media_profiles.xml from OB2 for comparison.
Also provide your magisk module screenshot and magisk system log for troubleshot
I'm running Dirty Unicorns RC - 8.1, which is AOSP.
This was working fine with OOS OB1.
This isn't currently working with 8.1 custom AOSP ROM. I'm not sure if there's a way to get it to work.
I've linked the requested xml file if it helps. I tried attaching but file wouldn't upload to post.
https://mega.nz/#!QPJmwKQI!SWBGwAdAp12uc6wzTp5gCofEdpQaLvAQu-_CvQZm21U
Listening to music on my Redmi Note 4 (mido), I noticed a loud crackling static noise when I use my headphones on Lineage and related ROMs like Pixel Experience. It's especially noticeable when a song starts to play. I didn't get this on MIUI.
so I decided to extract the MIUI mixer files (files that manage the audio), and the noises were solved in Custom Roms
DOWNLOAD: bit.ly/2OAlXDN
- Copy all .xml files to /vendor/etc and reboot
*Improvements in music quality (removing noise in Custom ROMs)
*Better call quality
*These files are from Redmi Note 4 (Mido)
Where is the file?
J_e4n said:
Mixer files extracted from MIUI
DOWNLOAD: bit . ly/ 2Om vs9 K (remove spaces)
- Copy all .xml files to /vendor/etc and reboot
*Improvements in music quality (removing noise in Custom ROMs)
*Better call quality
*These files are from Redmi Note 4 (Mido)
Click to expand...
Click to collapse
Can't able to download from afh, would you please provide another link.
Where is link
No mirrors found for AFH
sauvik kumar said:
Can't able to download from afh, would you please provide another link.
Click to expand...
Click to collapse
Updated
aakash dabrase said:
No mirrors found for AFH
Click to expand...
Click to collapse
Updated
It Worked!!!!
Good amount of Sound Quality improvements. Crackling Sound is Just disappread...
Thanks!
Thanks mate... Worked like a charm...
Sent from my mido using XDA Labs
Wow thank you man, it's working like a charm.
Gonna give it a try
I'm going to test this out because I noticed the cracking and bad sound quality over Bluetooth in Android Pie. But I would recommend creating a Magisk module for this so it can both installed and Uninstaller easily and so many others can test it. There is a Magisk tutorial that can help you create the module if you want to do it.
Can't download from AFH, no mirrors found
abhinavotaku said:
Can't download from AFH, no mirrors found
Click to expand...
Click to collapse
There you go!
Magisk module would be great
Magisk Module
netscvngr said:
I'm going to test this out because I noticed the cracking and bad sound quality over Bluetooth in Android Pie. But I would recommend creating a Magisk module for this so it can both installed and Uninstaller easily and so many others can test it. There is a Magisk tutorial that can help you create the module if you want to do it.
Click to expand...
Click to collapse
NinadKokani said:
Magisk module would be great
Click to expand...
Click to collapse
Here you guys, magisk module for the latest magisk i.e. v17. Enjoy.
This sound mod didn't work for me, maybe because I'm on Android Pie.
I'll try to make similar mod for Pie as well.
Do hit thanks if I helped you.
AP_on_xda said:
Here you guys, magisk module for the latest magisk i.e. v17. Enjoy.
This sound mod didn't work for me, maybe because I'm on Android Pie.
I'll try to make similar mod for Pie as well.
Do hit thanks if I helped you.
Click to expand...
Click to collapse
Working on pie??
NinadKokani said:
Working on pie??
Click to expand...
Click to collapse
Read the above post
zoel.fahmi said:
Read the above post
Click to expand...
Click to collapse
But it's not stable
NinadKokani said:
But it's not stable
Click to expand...
Click to collapse
Then don't use it, the dev still develop for Android Pie