Noroot USB Reverth Tethering - General Topics

Hi.
There is a new method for USB Reverth Tethering that doesn't require your Android to be rooted.
(This topic has been talked with root option in other threads before)
Noroot reverth Tethering
play.google.com/store/apps/details?id=com.floriandraschbacher.reversetethering.free
It only works for Browser apps like firefox on old device,And supports Chrome and instagram's newest versions(free version works for 10 minutes each 30 minutes)
You can download files using chrome's built in downloader with tethered Network
For old device use firefox
* In ReverseTethering’s settings, make sure Mode 2 is selected
* Install Firefox on the Android device
* In Firefox, open the page about:config
* Filter for settings containing the name proxy
* For network.proxy.http, enter 127.0.0.1
* For network.proxy.http_port, enter 59753
* For network.proxy.ssl, enter 127.0.0.1
* For network.proxy.ssl_port, enter 59753
* For network.proxy.type, enter 1
The app is under development,
It works as a vpn that tunnel internet to the app,and app itself gets internet from server program runned on computer
You should install your Phone's ADB package on computer(for my samsung it is samsung kies or smart switch it is different from USB driver windows install for phone) and jave's JRE8 must be installed on pc so that sever program runs on your PC
Don't forget that if you use Android 6 or higher you should grant storage permission from Application manager ,in this app's permission panel
There is a trick for other non-browser type apps to use this tethered network
You should first connect to a wifi hotspot during process and then disconnect,so that apps think they are using wifi hotspot while infact they are using usb tethered network
Well,to get all the apps to use Usb revertht tethered Network,is a little tricky.I hope someone makes a better app that do all these tricks by itself
For now you can enjoy usb reverth tethered internet on firefox or latest chrome and instagram's version on Android

Related

[MOD] DNS Server for Android - Notable speed increase

Hi,
This is a potential game changer, DNS server for Android, the open source, DNSMasq and some specific config files for it.
It runs on your Android device and you point your DNS queries to it instead of your remote ISP DNS server.
Using this setup will speed up your Android online experience many fold because DNS (specially over 3G) is one of the slowest blocking components of the entire browsing activity.
Features/Points to note -
- Caching, multithreaded. The replies from the cache are instantenous, hence browsing speed is enhanced significantly
- Query multiple DNS servers simultaneously. Fastest reply is used. Hence redundancy is also achieved along with speed. Currently set to Google DNS servers, Open DNS servers and your home Wifi router. Best not to use more than 5.
- Works with all versions of Android from 1.5 -4.x and all Android phones and tablets
- You can add your ISP's (both 3g and home) DNS servers to /data/local/dnsmasq.conf.
- Don't use your ISP's servers (and remove your Wifi router) if anonymity is a concern.
- Can help circumvent DNS restrictions.
- If your home router has DNS and an IP other than 192.168.1.1, you can change the entry in /data/local/dnsmasq.conf
- It may not start automatically if your ROM doesn't have init.d support. In that case and in either case, you can download SManager and set /etc/init.d/97dns to 'su' (run as root), 'boot' (run on boot) and 'net' ( run on network change)
- To make it stick all the more, you can download SetDNS and enable it and set the DNS server to 'Custom' -> 127.0.0.1 primary and 8.8.4.4 secondary ( backup Google DNS in case DNSMasq is not running for some reason). Make sure that you have Wifi and 3G options checked.
- Will significantly speed up your tethering experience if you set your DNS server to the Android phone and to use this DNS server. Currently the dhcpd option is disabled. You can either enable it or tell your tethering DHCP software to send DNS server=192.168.x.x ( or your Android phone IP) to your PC.
- Block Ads with the MVPS HOSTS file located at /data/local/dnsmasq-host
- VPN connections with and without split tunneling are supported. Check out commented sections in config files. Can use different DNS servers for different domains.
- You need to use this version of DNSMasq. Others ( eg those distributed with most ROMs) have a runaway CPU problem or don't work without the -d (debug) option. Any help resolving those issues welcome.
- You'll need root and su. busybox optional. Simply run Install.bat to install it and configure it automatically. Then make it stick with SManager and SetDNS as mentioned above.
- It's not mine, I just found the correct version and configured it.
- Enjoy! Please click the Thanks button if this helps you.
25th May - Fixed bug where Wifi DHCP wasn't working
Any idea why this breaks my native tether on an og evo 4g on team dirt cm9 port?
Is it necessary to use the install.bat from a pc to make this work or can I just add the dns script to the init.d folder?
Firstly, thank you.
I am trying to manually setup this so I can use some dns redirection (using the --server option) but when I run the install.bat file, it breaks tethering (which uses dnsmasq as well). Would you please help me out understanding what steps the script did to get it running?
Hi,
I think that this version of DNSMASQ may need some different startup options to support dhcp. I have specifically disabled dhcp in the config file.
Or it (dhcp) simply may be compiled out of the binary and it currently may not be usable for both DNS and DHCP.
YMMV. BTW the install script backs up the dnsmasq binary so you can replace it with the backup in case of any issues.
Cheers.
I will try this one if it'll bring any good to my connection. Thanks.

a way to earn a few dollars

what I bring is a new application or not so new that we can make a few $ $ to download aplicacciones. The application is Freemyapps, the bad of this application is that it offers many applications to download if for example you are for latin america. that was my solution working I bring as many to take advantage of the app.
I have them two solucciones.
the first is for users without root and root users
This is to get off an application that allows them to create a VPN to pretend that they are in another country.
such as
Hotspot Shield VPN
Hideman VPN (my favorite)
if you want to download an application can make a vpn settings in the configuration of the equipment in the following path:
settings / more / vpn
some are available vpn:
getusvpn.com/
vpngate.net/en/
the second option is for root users
This option is a bit more difficult but has the advantage that we can download the application in a simulator using the pc plus there are many more that vpn for pc for phone
1. We have to make a backup of the application on the phone can use for this titanium backup
2. down the emulator in genymotion.com This is faster than I've tried
3. once we have installed the emulator, create a terminal that has the googles apps
4. load the backup of the application on the device created
5. We have almost everything ready
6. We can download this software to have vpn on pc vpngate.net/en/download.aspx
download the VPN Client + Download SoftEther Gate VPN Client Plug-in
7.Now if everything is ready to run
can download the application freemyapps through this link on your phone m.freemyapps.com/share/email/7578cd8d
For a little too excited and try these are the gifs card that I have gained
Any questions do not stop in doing
sorry for my English is better my Spanish

[how to]Use Android As Mouse&Keyboard and Remote

USE ANDROID AS MOUSE&KEYBOARD AND REMOTE​
{THIS REQUIRE WIFI RECIEVER IN PC(LAPTOPS HAVE INBUILT),BLUETOOTH RECIEVER ALSO WORKS BUT I HAVENT USED SO NO STEPS FOR BLUETOOH CONNECTIVTY,TRY ON OWN.}​
IF your keyboard or mouse is not working or if you want to showoff to your freinds,or many more resaons to use it.Here Is Simple Guide To Use Your Android As Remote:-​
1)Download These Two Files-Android App, Pc Software.
2)Put & Install Android App on Mobile & Pc software on pc.
3)During Installation On PC it will ask "Would you like to install this device software" Then Tick on Always Box and Click Install.
4)Finish the Installation And Restart PC.After some Time Windows Security alert may ask For acess,Then tick on both Box there and Click to Allow Acess.
5)Then a Green Icon Should Appear in Hidden App drawer if Unified Remote App is running on pc.
6)Now install the app on mobile and run it.
7)NOW IN MOBILE SELECT ADD SERVER AND CHOOSE MANUAL METHOD THEN PUT ANY DESIRED NAME.
6)FOR "IP ADRESS,TCP,UDP & MAC COLUMN' GO TO UNIFIED REMOTE SOFTWARE ON PC AND OPEN IT,BROWSE TO CONNECTION TAB,PUT UDP AND TCP FROM HERE,NOW CLICK ON NETWORK INTERFACE AND FIND WIRELESS NETWORK CONNECTION AND PUT ITS IP ON MOBILE.
6)LAST STEP IS COPY PHYSICAL ADRESS OF WIRELESS NETWORK CONNECTION AND PUT IN MAC ADRESS ON PC AND MOBILE BOTH AND SELECT FINISH ON MOBILE.NOW YOU ARE CONNECTED TO PC AND EXPLORE THE APP TO FIND MORE.LOTS OF FEATURE IN THERE.
CREDITS-ALL CREDITS GOES TO RESPECTIVE OWNER OF APP.
IF ANY QUESTIONS PLEASE REPLY AND IF WORKS THEN HIT THANKS...​
Works
Awesome
Thanks :good:
abhimanyu bajaj said:
awesome
thanks :good:
Click to expand...
Click to collapse
good to know that worked.
AND PRESS THANKS ALSO DUDE.

Mobile Data State Change through PC[ROOT][Android 4+]

Required Root, only for Android 4+, I don't have below OS versions atm
Hi,
I made this app for my use, because I sometimes use a time-based internet package. so to save my internet package time I made this, maybe this will be useful to you. This includes 2 apps,
1 - Android app
2- PC client app - need .net 4
Android app is used to connect to your PC client app via your hotspot. You can assign any port you want.
After you connected successfully, you can change the mobile data state by 1 click. Please Disconnet by pressing "Stop" button in PC Client, android app will be closed automatically.
Thanks
Please use latest WINRAR to extract if not works for older versions.

[5.x,6.x,7.x] How to use VPN in CM builds on mt65xx devices

Install Shadowsock VPN : Use NAT mode to tunnel whole device
Download
Other OPTIONS
A workaround for VPN tunneling whole device
Follow these steps :
1. Go to psiphon and choose Browser-Only mode don't tunnel whole device.
2. Go to its logs tab and check the port of http proxy.
3. Now open WiFi setting and long press to your WiFi network (from which u are connected) go to modify tab and from check the advanced options.
4. Chosen manual proxy option and put host name as 127.0.0.1 and port as the no. which you noted in step 2 (eg. 8080) and click save .
Enjoy you have set up a VPN connection successfully.
You can open your browser and check your IP
Note: You have to undo this after you don't need VPN by changing manual proxy to none .
For those who want to use Orbot vpn
This is very similar to previous vpn workaround for psiphon
Just follow these step for Orbot
1. Open Orbot and long press to start orbot.
2. When all bootstrapped done go to check browser it will ask for normal browser or install Orweb .
3. Open Orweb and volla you r connected to tor but actually its not to tunnel your traffic to vpn go to Orweb settings.
4. Now note the proxy host and proxy port generally it is localhost(same as 127.0.0.1) and 8118 respectively but it may change so better to keep updated with port numbers.
5. Now go to wifi setting and long press the wifi (from which u r connected) and check advanced options.
6. Choose manual proxy option and put the host name 127.0.0.1 and port no. (e.g. 8118 ) which u noted in step 4
Now u can check https://check.torproject.org from any browser and volla Congo this browser is configured to use tor.
Sorry for long guide but it is detail enough so that anyone can easily setup tor in cm builds.
Note: You have to undo manual proxy option to none after you don't use vpn.
All credit of this workaround goes to - Suraj Rawat (@nervehammer) : thanks man
Don't forget to press thank ​

Categories

Resources