So I unlocked bootloader then reboot to boot-loader, now on fast-boot mode, trying to install twrp and it says FRP lock, and cannot execute any commands.
I know my passwords etc but doesn't work, anyone with ideas?
jkipkangor said:
So I unlocked bootloader then reboot to boot-loader, now on fast-boot mode, trying to install twrp and it says FRP lock, and cannot execute any commands.
I know my passwords etc but doesn't work, anyone with ideas?
Click to expand...
Click to collapse
Did you enable oem unlock in developer settings?
gm007 said:
Did you enable oem unlock in developer settings?
Click to expand...
Click to collapse
Yes I actually unlocked bootloader successfully
jkipkangor said:
Yes I actually unlocked bootloader successfully
Click to expand...
Click to collapse
Check if you can turn it off and on again, enable usb debugging,or try a factory reset.
One more try to log in to ur Google account.
jkipkangor said:
Yes I actually unlocked bootloader successfully
Click to expand...
Click to collapse
What is your full build number (Settings / About phone / Build number) ?
For example, I have MHA-L29C432B126 and unlocked bootloader month ago
My phone shows:
Phone unlocked
FRP Unlock
5[Strogino] said:
What is your full build number (Settings / About phone / Build number) ?
For example, I have MHA-L29C432B126 and unlocked bootloader month ago
My phone shows:
Phone unlocked
FRP Unlock
Click to expand...
Click to collapse
Build is MHA-L09C185B110
jkipkangor said:
Build is MHA-L09C185B110
Click to expand...
Click to collapse
Seems like very old build. But no update for L09C185.
You should request update from Huawei Support.
5[Strogino] said:
Seems like very old build. But no update for L09C185.
You should request update from Huawei Support.
Click to expand...
Click to collapse
Funny thing is that I can use the phone etc but cannot execute any commands on bootloader.
When I dial *#*#2846579#*#* then select reset, it is clean of any FRP! It's only when it's in fastboot mode!
jkipkangor said:
So I unlocked bootloader then reboot to boot-loader, now on fast-boot mode, trying to install twrp and it says FRP lock, and cannot execute any commands.
I know my passwords etc but doesn't work, anyone with ideas?
Click to expand...
Click to collapse
Anyone with a solution to this? Help.
when your phone boot up, did you finish google account process ? you didnt, you need finish it and go to developer option to enable unlock bl... and try again
jc83419 said:
when your phone boot up, did you finish google account process ? you didn't, you need finish it and go to developer option to enable unlock bl... and try again
Click to expand...
Click to collapse
This FRP Lock is different from the Google Account one, this is at the Bootloader/Fastboot screen. Logging in etc is working.
jkipkangor said:
This FRP Lock is different from the Google Account one, this is at the Bootloader/Fastboot screen. Logging in etc is working.
Click to expand...
Click to collapse
Disable oem unlock in dev options and enable again.
Try factory reset from stock recovery.
Unlock bootloader again.
gm007 said:
Disable oem unlock in dev options and enable again.
Try factory reset from stock recovery.
Unlock bootloader again.
Click to expand...
Click to collapse
It's greyed out unfortunately
Maybe try to relock ur bootloader?
Try one of this command:
fastboot oem lock (xxxxxxxxx)ur password.
fastboot oem relock xxxxxxxxxx
gm007 said:
Maybe try to relock ur bootloader?
Try one of this command:
fastboot oem lock (xxxxxxxxx)ur password.
fastboot oem relock xxxxxxxxxx
Click to expand...
Click to collapse
Relock worked bro. Now status is;
Phone Relocked
FRP Lock
jkipkangor said:
Relock worked bro. Now status is;
Phone Relocked
FRP Lock
Click to expand...
Click to collapse
Great unlock again,but try first if you can change oem unlock in dev settings.
gm007 said:
Great unlock again,but try first if you can change oem unlock in dev settings.
Click to expand...
Click to collapse
Will this unlock the FRP?
frp kilidi
acabildinmi sen kilidi
You basically have to reflash a Rom again with funkyhuawei which will relock and fix your ftp lock in the bootloader. Had the same problem and took me a while to recover...
Second time you unlock the bootloader after fixing it this way it works properly. At that point I just said screw it and left it locked. No idea why, must be some kind of bug.
Related
After I Upload b320 Stock rom to My Phone which I Upload it rom with bootloder key before, it took root.
When I tried to upload twrp recovery again, there was a mistake command not allowed. ı tried it two different pc and two different programme
I have same Problem.The Bootloader shows unlocked,but it's locked.Unlock again and works for me.
letschky said:
I have same Problem.The Bootloader shows unlocked,but it's locked.Unlock again and works for me.
Click to expand...
Click to collapse
while I am trying to relock bootlader method, I met a new mistake failed remote root type is risk
Is FRP unlocked?
no frp is locked
ok unlock it,this is the Problem
Go into Settings-Phoneinfo and press 7 times on Build Number.(This enable Developers Option)
Go back to Developer Options and enable OEM Unlock.
You can flash Twrp,does not work unlock your Bootloader again
letschky said:
ok unlock it,this is the Problem
Go into Settings-Phoneinfo and press 7 times on Build Number.(This enable Developers Option)
Go back to Developer Options and enable OEM Unlock.
You can flash Twrp,does not work unlock your Bootloader again
Click to expand...
Click to collapse
Thank you. İ fixed problem ?
I cannot turn on the enable OEM Unlock, the option is grey disabled. What can I do? Im in nougat, should I try rollback to 6.0?
I have same problem... Is it possible that only solution is rollback??
6marcus9 said:
I have same problem... Is it possible that only solution is rollback??
Click to expand...
Click to collapse
I rollback and fix it. It's looks like nougat or beta versions disable OEM unlock
6marcus9 said:
I have same problem... Is it possible that only solution is rollback??
Click to expand...
Click to collapse
I fix It. The solution is easy but in anyway you need wipe your device
The steps are below
1 switch your phone in bootloader mode
2 with fastboot enable OEM lock , after lock the phone will be wipe
3 wait boot and configuration
4 enable develop mode e now you can disable OEM protection (FRP)
5 now switch your phone in bootloader mode and with fastboot unlock OEM
6 after wipe your phone will be with bootloader unlock and Frp unlock
Good luck
Sent from my HUAWEI NXT-L29 using XDA-Developers Legacy app
have a serious problem, after unlocking the bootloader I have mistakenly called the lock oem option. Now my phone is unlocked Bootloader but OEM locked.
It does not fire, I only have access to Recovery and fastboot.
Is there a command to unlock oem?
Thanks
What do you mean by oem unlock?is it the one in developer settings?
What is the problem you are facing now? The phone doesn't boot?
gm007 said:
What do you mean by oem unlock?is it the one in developer settings?
What is the problem you are facing now? The phone doesn't boot?
Click to expand...
Click to collapse
Yes the developer. The phone does not start, I can access recovery, flashear recovery twrp, eRocovery, but it never does anything, it only stays in the first message where it says starting ...
Well I'm having a strange issue.
I've unlocked bootloader then flashed twrp. It didn't work then. When i boot my phone to recovery, a screen appears with a security warning and nothing happens. Then somehow my frp is triggered. Now i can't flash anything and my recovery is messed up . My phone boots normally though.
Is there any way to unlock the FRP? :/
Anyone? ?
Rommco05 said:
In developer options is OEM setting which need be enabled for FRP unlocked. Probably with unlocked bootloader u cant change this option, so need relock bootloader and enable OEM and again unlock bl
Click to expand...
Click to collapse
I know that brother. I've tried dload method for full firmware restore. Sadly after 5% it shows error . Now I'm left with no options at all.
Hi, I'm trying to root my Honor 8 device and install TWRP. However when I try to flash the TWRP file in ADB, I get this error message:
FAILED(remote not allowed). I have tried different versions of TWRP, the latest one and the one thats for Honor 8 on their site. I have unlocked bootloader. I don't understand what's happening. Can someone please explain this?
It's my first time rooting a device manually, so i dont know much. If you are able to, please refer to things in an easy manner.
Thanks in advance.
ver1x said:
Hi, I'm trying to root my Honor 8 device and install TWRP. However when I try to flash the TWRP file in ADB, I get this error message:
FAILED(remote not allowed). I have tried different versions of TWRP, the latest one and the one thats for Honor 8 on their site. I have unlocked bootloader. I don't understand what's happening. Can someone please explain this?
It's my first time rooting a device manually, so i dont know much. If you are able to, please refer to things in an easy manner.
Thanks in advance.
Click to expand...
Click to collapse
Is Your Bootloader Unlocked???
And Also This TWRP:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563/page1
Can Only Work For The Honor 8 Android 7
On TWRP Website, The TWRP There Only Works For The Honor In Android 6.
Also When Flashing a recovery Do "fastboot flash recovery [Filename]"
RealFireBlaze20 said:
Is Your Bootloader Unlocked???
And Also This TWRP:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563/page1
Can Only Work For The Honor 8 Android 7
On TWRP Website, The TWRP There Only Works For The Honor In Android 6.
Also When Flashing a recovery Do "fastboot flash recovery [Filename]"
Click to expand...
Click to collapse
Yes i have unlocked the bootloader. I'm pretty sure i've already tried that version of TWRP, but i will try again tomorrow.
I always flash recovery using "fastboot flash recovery (file name)" so that's not the problem.
ver1x said:
Yes i have unlocked the bootloader. I'm pretty sure i've already tried that version of TWRP, but i will try again tomorrow.
I always flash recovery using "fastboot flash recovery (file name)" so that's not the problem.
Click to expand...
Click to collapse
Hmmmm... Okay
RealFireBlaze20 said:
Hmmmm... Okay
Click to expand...
Click to collapse
I think i might have found the problem.
When i go into bootloader it says FRP lock, i've looked around a bit, and i cant seem to figure out what it is and how i can unlock it.
If you know, how?
ver1x said:
I think i might have found the problem.
When i go into bootloader it says FRP lock, i've looked around a bit, and i cant seem to figure out what it is and how i can unlock it.
If you know, how?
Click to expand...
Click to collapse
I had same problem. I successfully unlocked bootloader but after that I accidentally restored default settings in developer settings and oem unlock was ticked off and greyd out. Then I noticed the same FRP lock.
I had to relock and unlock the bootloader. Only after that I was able to flash twrp on my phone.
To relock you type "fastboot oem relock (unlock code)"
After that you can turn on "oem unlock" and "usb debugging"
And yes, It will wipe your data when relocking and again after unlocking so it takes some time. Hope this helps :fingers-crossed:
Juhkimo said:
I had same problem. I successfully unlocked bootloader but after that I accidentally restored default settings in developer settings and oem unlock was ticked off and greyd out. Then I noticed the same FRP lock.
I had to relock and unlock the bootloader. Only after that I was able to flash twrp on my phone.
To relock you type "fastboot oem relock (unlock code)"
After that you can turn on "oem unlock" and "usb debugging"
And yes, It will wipe your data when relocking and again after unlocking so it takes some time. Hope this helps :fingers-crossed:
Click to expand...
Click to collapse
Thanks, i will definetely try this!
Edit: it worked! Thank you so much.
ver1x said:
Thanks, i will definetely try this!
Edit: it worked! Thank you so much.
Click to expand...
Click to collapse
Good to hear that
I can't do it
How am I supposed to get the bootloader code now that Huawei disabled it on their site?
VFR99 said:
How am I supposed to get the bootloader code now that Huawei disabled it on their site?
Click to expand...
Click to collapse
Dc unlocker Progam for pc
Hi everybody!
After the precious advice of user ndt192, I managed to unlock my SKR-A0 which, until this day, seemed un-unlockable.
THIS PROCEDURE WILL WIPE YOUR PHONE MEMORY SO REMEMBER TO BACKUP EVERYTHING
TL;DR
In developer options, OEM Unlocking must be ticked (if present), then I just issued a fastboot oem unlock while in fastboot mode.
I'm on the latest OTA (29-12-18, v. G66X1812291CN00MPX).
Full Tutorial
Enable developer options by tapping 7+ times on Settings -> About Phone -> Build Number
Enable USB Debugging and OEM Unlocking (if present) in Developer Options (Settings -> Other Settings -> Advanced Settings -> Developer Options)
Open a terminal and issue the command adb devices
On the phone, allow the access from your computer on the dialog that will be shown
In terminal adb reboot bootloader
Wait for the phone to reboot in bootloader mode
STOP AND THINK - DID YOU BACKUP EVERYTHING?
Issue the command fastboot oem unlock and wait for the OKAY in the terminal window
Reboot your phone with fastboot reboot
Now, you will be informed that because of the unlocking your phone memory is "corrupted" (aka not decryptable anymore) so the phone needs to be wiped. Agree and wait.
Hopefully, your bootloader will be unlocked now. You can check that by returning to fastboot mode and checking that the Status is Unlocked.
If you want TWRP/root, check out this thread.
This procedure didn't seem to work until a few months ago so I don't know exactly if this procedure works only on newest Joy UI versions or not. Try it out (at your own risk).
IMPORTANT - if you can't unlock with these steps, please post here with the version of Joy UI installed and the message shown after the fastboot oem unlock command
loriz said:
Hi everybody!
After the precious advice of user ndt192, I managed to unlock my SKR-A0 which, until this day, seemed un-unlockable.
THIS PROCEDURE WILL WIPE YOUR PHONE MEMORY SO REMEMBER TO BACKUP EVERYTHING
TL;DR
In developer options, OEM Unlocking must be ticked (if present), then I just issued a fastboot oem unlock while in fastboot mode.
I'm on the latest OTA (29-12-18, v. G66X1812291CN00MPX).
Full Tutorial
Enable developer options by tapping 7+ times on Settings -> About Phone -> Build Number
Enable USB Debugging and OEM Unlocking (if present) in Developer Options (Settings -> Other Settings -> Advanced Settings -> Developer Options)
Open a terminal and issue the command adb devices
On the phone, allow the access from your computer on the dialog that will be shown
In terminal adb reboot bootloader
Wait for the phone to reboot in bootloader mode
STOP AND THINK - DID YOU BACKUP EVERYTHING?
Issue the command fastboot oem unlock and wait for the OKAY in the terminal window
Reboot your phone with fastboot reboot
Now, you will be informed that because of the unlocking your phone memory is "corrupted" (aka not decryptable anymore) so the phone needs to be wiped. Agree and wait.
Hopefully, your bootloader will be unlocked now. You can check that by returning to fastboot mode and checking that the Status is Unlocked.
This procedure didn't seem to work until a few months ago so I don't know exactly if this procedure works only on newest Joy UI versions or not. Try it out (at your own risk).
IMPORTANT - if you can't unlock with these steps, please post here with the version of Joy UI installed and the message shown after the fastboot oem unlock command
Click to expand...
Click to collapse
It worked, now can we install magisk manager on our phone?
Synezio said:
It worked, now can we install magisk manager on our phone?
Click to expand...
Click to collapse
It looks like there's some progress on that too! What a great day!
See here: https://forum.xda-developers.com/android/development/recovery-unofficial-twrp-recovery-t3892707
Need help my blackshark bootloop after I try to unlock bootloader
i make mistake that i write wrong code
adb reboot bootloader
Fastboot oem unlock
(its make my device factory reset) and then I try go to bootloader again but this device already unlocked.
But after that, I try to open recovery mode. and factory reset it. and its going like this *bootloop
please I need help, I can't do anything to this phone again because its can't go bootloader again even I press volume down+power T_T
What should I do ?
(Sorry my english so bad)
for addition, you need to unlock the critical too
kanded said:
for addition, you need to unlock the critical too
Click to expand...
Click to collapse
how to unlock critical in china version?
isotonik said:
how to unlock critical in china version?
Click to expand...
Click to collapse
how do you know unlock critical in global ? its just the same
kanded said:
how do you know unlock critical in global ? its just the same
Click to expand...
Click to collapse
in global version use command fastboot flashing unlock_critical but not work on cn version .
i just unlock critical on cn version with command fastboot oem unlock_critical
need wipe/format data manual at stock recovery after unlock critical will ask for password if not wipe at stock recovery.
isotonik said:
in global version use command fastboot flashing unlock_critical but not work on cn version .
i just unlock critical on cn version with command fastboot oem unlock_critical
need wipe/format data manual at stock recovery after unlock critical will ask for password if not wipe at stock recovery.
Click to expand...
Click to collapse
you unlocked it, congrats. its not that hard if you want to read ton of threds in xda.
Anyone can help me... I have blackshark GLOBAL (SKR-H0)
And i need help...
How to change global to china rom.. Sorry my bad english
.big thanks...
My black shark china version suddenly unknown baseband version, no IMEI, no wifi MAC address, no service and no sim cards. Please help how to do?
kanded said:
you unlocked it, congrats. its not that hard if you want to read ton of threds in xda.
Click to expand...
Click to collapse
What do you mean? he asked about password.
Do you celebrate unlock?i dont understand
Let me know how to unlock password!
I am the same.
kanded said:
you unlocked it, congrats. its not that hard if you want to read ton of threds in xda.
Click to expand...
Click to collapse
what do u mean? he asked about password...
u tell unlock? congrats
how get about password
im same
Hi, i have a skr-a0 china bs 1.
i unlocked my bs and install twrp and magisk but i dont have a backups. anyone help me i turn to stock or enabled ota ?
TabldotLife said:
Hi, i have a skr-a0 china bs 1.
i unlocked my bs and install twrp and magisk but i dont have a backups. anyone help me i turn to stock or enabled ota ?
Click to expand...
Click to collapse
Every thread says do a backup. You didn't. Wait until someone with a China BS backs up and uploads
gilbert32 said:
Every thread says do a backup. You didn't. Wait until someone with a China BS backs up and uploads
Click to expand...
Click to collapse
sorry i dont backup first and wait now thx for reply and sory again my babblng
Unlock bootloader
You unlock bootloader without a code?my phone P10lite and need to code,it's really working?OMG
Help me pls, i unlock my black shark china, when i type fastboot oem unlock then cmd not working, why?
Help pls
Help, i got bootloop on my bs2pro, need unlock bootloder code for reflashing stock rom
this methode didnt work on android 10.
anyone know how to unlock bootloader and root balckshark on android 10 ?