My tablet got hardbricked after a wrong firmware update, and now it does not boot anymore neither recovery mode and nor adb. Is there a way to recuperate it? Or somehow boot it via sd card?
there are informations about it:
CPU: via wm8880 Cortex A9 DUAL CORE 1.5GHz / DUAL GPU: 400MHz
RAM: 512MB
STORAGE: 8GB but I had access to only 4GB
this tablet is Genesis GT-7304
as far as I know this tablet boots from eeprom memory.
Hi !
Unfortunately I couldn`t find anything related to your tablet here on xda , try a deeper search on google or post your issue here
https://forum.xda-developers.com/android/help
Good luck !
Related
Hi,
a friend of mine buyed a cheap tablet
its a
LGM FLYER SKY W MATE
with: Android 4.0
Cortex A8 1.2Ghz CPU
Mali-400 GPU
512MB RAM
8GB Memory (storage)
NO SD CARD
It stucks on startup logo "W MATE" right afther the Android logo
I tryed to enter Recovery menu, but its in CHINESE!
Any Suggestions?
Hi
I've got GoClever Quantum 700N tablet - spec: MTK8127 1.3GHz (Cortex A7) Mali450MP4 512MB DDR3 8GB eMMC flash
There is no firmware avaible on this tablet so maybe You can help me to find compatybil firmware from other tablet.
The problem is that hangs on logo but there are no side buttons (+ - ) and adb is not working so only way is to flash it with other fw.
Thanks in advance
looks like no one have tried anything yet...
did you managed to do something?
Goclever 700n
piracik said:
Hi
I've got GoClever Quantum 700N tablet - spec: MTK8127 1.3GHz (Cortex A7) Mali450MP4 512MB DDR3 8GB eMMC flash
There is no firmware avaible on this tablet so maybe You can help me to find compatybil firmware from other tablet.
The problem is that hangs on logo but there are no side buttons (+ - ) and adb is not working so only way is to flash it with other fw.
Thanks in advance
Click to expand...
Click to collapse
Hello. Have you resolved the problem of your tablet?
First of all I don't know if it's a softbricked or hardbricked device. I read on some forum that if it doesn't turn on, the device is hardbricked. So I look for softbricked guides, however, all the guides I found requires TWRP access. To get things clear, my device can be turned on, but it doesn't boot properly, it pops up "Unfortunately, System UI has stopped.". I've seen a lot of guides on how to fix that but it all requires TWRP access, which unfortunately, for some reason, I unknowingly removed it from my device.
I've also found some guides on how to install TWRP through adb but I can't get it to work.
Here's the full information of my device:
Android 5.1 Lollipop
1.2GHz Quad Core ARM Cortex-A7
Spreadtrum 7731C Chipset
Mali 400-MP2 @ 400MHz Video Card
512MB RAM + 4GB ROM, 32GB Micro SD Max Expansion
Any help would be greatly appreciated. Thank you!
Hello,
I have this car head Unit:
- Model: Caska ca712-xl7
- Seller Model: Pumpkin RD0258 (www..amazon.co.uk/dp/B01AXMEAWS/ref=cfb_at_prodpg)
- CPU: Rockchip RK3066 Cortex A9 Dual Core 1.6GHz
- Screen Resolution: 1024*600
A few days ago i have installed a bad firmware. Now the unit is stucked in the logo screen, and i can no longer install the factory firmware that i've installed 2 weeks ago, the recovery system is not working anymore :crying:.
Can anyone please tell me if there is a way to install a recovery system or run a firmware instalation with a recovery system from the SD card?
Please HELP :crying:
Hello friend
Did you solve your problem?
I have the same CASKA CA712-XL7 unit. I think your problem is that the unit does not have the RK3066 processor as everyone says.
The unit has the ARM 32F101. I took this photo inside the unit and as you can see it has that processor.
So, did you solve your problem?
Thank you.
hello all
need rom for my brick
Diva QC-803GN 8" QUAD CORE 3G
quick specs
cpu : 1.3 GHz Quad-Core MT8382
ram : 1GB
rom : 8GB
3G and it was with android 5.1
it boot and stuck on loading.
i can go in recovery and fastboot but i can't do anything else.
i try factory reset. no luck.
I came here after I tried to replaces internal memory with usb storage.
in recovery mode i see at the top:
K706L1-V10JQXS8GF8GBG-WG03.WSVGA.125.QC-803GN
well it look like RoverPad Sky Q8 3G is same hardware.
firmware is working nice.
and now i have working tablet.
thanks all for help