Related
I've been trying to flash a new rom, and I can't. Fastboot pops up every time I try to boot recovery saying "No boot or recovery image"
My phone still boots it's rom normally and can connect to the computer via usb just fine, but I've tried flashing several different CWM recoveries and none of them work, it all just gives this same error. I can't re-flash now, and this rom is not working well. What do I do?
iamtheculprit said:
I've been trying to flash a new rom, and I can't. Fastboot pops up every time I try to boot recovery saying "No boot or recovery image"
My phone still boots it's rom normally and can connect to the computer via usb just fine, but I've tried flashing several different CWM recoveries and none of them work, it all just gives this same error. I can't re-flash now, and this rom is not working well. What do I do?
Click to expand...
Click to collapse
are you spelling the name of the recovery correctly? is the recovery file(.img) in the same folder in your computer as fastboot is?
Search "flash image GUI" I think, here on xda, on the thread download the apk, then install on your phone, then go to rom manager the WEBSITE, find a recovery image that corresponds with your phone then download it. Now go to flash image gui and flash the CWR image you just got like 2 or 3 times just so it sticks now see if it works.
Nevermind, as simms said (didn't read properly). You can use the tab key to autofinish the name of the recovery.
Hi guys, I found the problem, but thank you all for your suggestions. the problem was my fastboot was still locked! (I'm not sure how I got this far without unlocking it, but now it's moot) Anyways, it works now, and all is well. Thanks!
Hello XDA community !
LAst week I bought my Acer A700, but after a few days a dead pixel appeared...
So I was on my way to send back my toy, when I saw that CMWR was available.
"Nice ! I can do a factory reset so my toy will be clean to be sent back !"
But the factory reset didn't work... It was stuck at "Formatting /data" for a while...
So I rebooted the A700, and now it's stuck at the ACER logo... I only have access to recovery...
Any ideas ?
Thanks a lot :good:
Since you have recovery try and do data wipe, then wipe cache then davlik cache, then reboot.
If you have recovery you can install a ROM by renaming it update.zip and using CWM.
Itchiee said:
Since you have recovery try and do data wipe, then wipe cache then davlik cache, then reboot.
If you have recovery you can install a ROM by renaming it update.zip and using CWM.
Click to expand...
Click to collapse
I already tried this, when I want to install a update.zip, it stucks at "installing update".
When I want to wipe a partition, it stucks at "formating /xxx" and nothing happens...
I wanted to flash stock bootloader with Nvflash, but I can't find APX drivers for ACER A700
Can you install the update.zip without the use of CWM (By pressing the powerbutton with the vol down)?
Also, where is your update.zip located?
Edit:
I guess it could do no harm if you'd hook up your device to the PC and enter the following commands:
adb reboot bootloader
fastboot erase cache
Click to expand...
Click to collapse
TomONeill said:
Can you install the update.zip without the use of CWM (By pressing the powerbutton with the vol down)?
Also, where is your update.zip located?
Edit:
I guess it could do no harm if you'd hook up your device to the PC and enter the following commands:
Click to expand...
Click to collapse
_ update.zip putted on a extrenal SD card doesn't work, it's skipped and CWM is launched.
_ the "adb reboot bootloader" puts the A700 in "APX" mode... and the "fastboot erase cache" is stuck at "waiting for device"...
Thanks for trying to help !!!
May this be a relevant solution??
http://androidforums.com/esteem-all...w-get-out-clockworkmod-recovery-bootloop.html
Edit:
I don't think the device checks for update.zip on the sdcard. Maybe there is a way to move the file to the internal. (adb mount sdcard adb push /sdcard/update.zip update.zip ?
Yeah,
The current CWM seems to corrupt the Data partition (amongst other things). Seems to be a going thing lately. Remember, these are new tabs, and new root & recovery methods, so there are going to be some bricked tabs before things get sorted out. This happens in "ALL" development, and everybody knows the risks involved.
I had the same issue. Couldn't reboot into fastboot, as it seems the OS has to be running?
This is why Skirlax_CZ built the bootloader for the 500/501, so you could boot it into fastboot mode, bypassing the OS. Unfortunately, the stock 70x OEM bootloader doesn't seem to allow this.
Best bet if you can't find the "exact" version rom the tab was shipped with, is to try renaming some full roms to update.zip, copy to sd, reboot (vol + and PWR, and see if it will install and boot. At the worst, it will install a stock bootloader and recovery.
Also, holding PWR, Vol - (I believe) and toggling the rotation lock should wipe User Data.
At the very worse, turn it into Acer Service, suck it up and pay the repair bill.
They will just install the correct service rom and give it back to you.
MD
Touns said:
Hello XDA community !
LAst week I bought my Acer A700, but after a few days a dead pixel appeared...
So I was on my way to send back my toy, when I saw that CMWR was available.
"Nice ! I can do a factory reset so my toy will be clean to be sent back !"
But the factory reset didn't work... It was stuck at "Formatting /data" for a while...
So I rebooted the A700, and now it's stuck at the ACER logo... I only have access to recovery...
Any ideas ?
Thanks a lot :good:
Click to expand...
Click to collapse
your situation is just same as mine,seeming bricked after using fatory rest or wiping from cwm,I think it's the problem of the damn cwm.as i know from now there are several devices got bricked,all because of the goddamn cwm.as we know factory rest is the same as recovery wiping,i use the under the official recovery,everything wen fine,but after wiping via cwm from the forum,it appeared the problem.
i tried a lot of method,just as u mentioned,to flash *.img
but i found a curious thing,after dumping series of *.img from a well-mailfuntioning device i can use fastboot to flash "userdata" which the loaction is mmcblk010 or /dev/block/platform/sdhci-tegra.3/by-name/UDA,but after flashing,i can't erase userdata block in fastboot.then i reflashing the data.img to userdata block,then in cwm,i can mount /data,but it's still not able to wipe or format it.then i've found a data.img and flashing the userdata and reboot.then i enter the system,and it forced me to do a factory reset,of course as before,it's not mailfunctioning because of the cwm or the block itself damaged..
but i can enter adb,and i found that i can see the /data and the filesystem in it.then i use mount to modify it,for i can delete or modify the files in /data,and it appears normally.i delete everything in /data.then i want to try to reboot to see if it's working,but after rebooting,the device stuck at acer logo,then i reboot into the cwm,it can't be mounted again.it seems that i can flash the userdata but i can't format or wipe or modify...
and i tried to reflash the bootloader from a well-mailfunctioning deivece,not working,either.
then i go for searching the situation in google,i found there are a lot of similar problems of the tegra device,and the solution is nvflash...
i don't know if there are a block saving the information of partitions just like the PIT file of my galaxy s2,seems we should wait for nvflash?or the method to flashing PIT partitions file?
i installed the nvflash driver by modifying the usb id,but i can't do anything from nvflash,it's not matching.
I had the same problem after I upgraded to JB with CWM recovery 6.0.14 and I tried to root it. But it stuck in acer logo. Then I went to recovery mode, but it couldn't mount sdcard or external card, too.
In my case, I solved it by these steps:
1. Try to go to fastboot mode by press vol (-) + power. After it vibrate, release power, and then play lock button. Then tablet will go to fastboot mode. http://forum.xda-developers.com/showthread.php?t=1861092
2. Download these boot and recovery images: https://www.box.com/s/3321wf8gg4at639nfn06
3. Try to flash these boot and recovery images to table:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
And then, reboot tablet:
fastboot reboot
WOW, my tablet works again.
:victory:
kwaiding said:
I had the same problem after I upgraded to JB with CWM recovery 6.0.14 and I tried to root it. But it stuck in acer logo. Then I went to recovery mode, but it couldn't mount sdcard or external card, too.
In my case, I solved it by these steps:
1. Try to go to fastboot mode by press vol (-) + power. After it vibrate, release power, and then play lock button. Then tablet will go to fastboot mode. http://forum.xda-developers.com/showthread.php?t=1861092
2. Download these boot and recovery images: https://www.box.com/s/3321wf8gg4at639nfn06
3. Try to flash these boot and recovery images to table:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
And then, reboot tablet:
fastboot reboot
WOW, my tablet works again.
:victory:
Click to expand...
Click to collapse
Unfortunately, although somewhat similar, this is not the same situation as the OP had.
The first CWM originally posted a few months ago, was posted by a user who used the totally wrong partition tables, and also, didn't own the tab so it was never tested (after the fact). Basically, it damaged the chipset which required a motherboard replacement. Not to mention a specifically nasty Data_Cap bug in the CWM kernel. No image flashing via fastboot (and probably NVFlash) would repair the damage. The result was several bricked tabs till the CWM was removed. (mine included)
Also note, that the current root procedure is by the same person. Although there is an alternative.
What you had, was simple data corruption on one of the Dev Blocks. This is why you were able to fastboot an image.
Corrupting a partition can happen at any time. Whether rooted, stock, or custom rom. So it's always nice to have ADB to pull your partition images. Just in case.
MD
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Hey! I'm having the same problem with my yu yureka.. Can anyone help me please!
Kaustubh M said:
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Click to expand...
Click to collapse
Hi! I'm having the same problem with this post... Does anyone knows the solution of this problem. I'd be really glad if anyone could help me with this..please!
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
im also having same problem i have also unknowingly wiped system & now im not able to flash any rom while flashing its rebooting automatically & i am able to enter in to fastboot mode then i have flashed factory firmware then also its not booting stucked on boot loop.
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
Click to expand...
Click to collapse
Bro tried that but nothing........
rss3183 said:
Bro tried that but nothing........
Click to expand...
Click to collapse
Can you be more specific ? Are you facing boot loop too?
anybody please help... facing the same problem and tried the solution as mentioned above but still facing Boot loop. what to do friends. please reply
I suddenly faced bootloop.....then I tried to flash stock rom without root...as a web page suggested me that....it was flashed successfully ...but still I am facing bootloop issue .....can someone pls help me to get out of this mess....pls help me...ASAP !!!
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
Click to expand...
Click to collapse
as its in boot loop battery has come to an end.... now what? having same problem as the topic creator
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
arunbiju969 said:
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
Click to expand...
Click to collapse
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a point and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Yogesh1969 said:
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a p loopoint and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Click to expand...
Click to collapse
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Sorry for a late reply...
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
The problem got solved bcos it had a battery problem !!!! Battery showed 90-100%, but could not hold up on boot.
A very strange case. Thanks.
Hi, I flashed my Yu Yureka AO5512 Yesterday and entered into recovery mode and selected the wipe userdata option. When it was doing the process after 20min the process stopped all together and My phone does not start at all now. If i press any button there is no response at all. Looks like phones OS and everything is wiped out. How do i go about from here?
Same problem , Stuck in BootLoop
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
YuganshT7 said:
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
Click to expand...
Click to collapse
Sorry to hear that anyway,
By stock lolipop you mean you had the yureka plus with Volte From factory right!!...if so the twrp might have been for the yureka plus with the cm bootloader which got replaced in the new Devcice
I am facing the same problem and in my case I dont think its an battery issue...I was happily using the CM 13.0 Snapshot Rom since a long time...but today morning when I did a soft reset by going into the settings in my yureka...the phone has gone in bootloop...and nothing is working...using fastboot I even flashed the twrp again and also flashed the CM 12.0 Stock firmware..but nothing is working...after the YU logo it restarts....please help...
I am also facing problem maybe worst
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Aditi Apte said:
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Click to expand...
Click to collapse
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
FAILED (remote: unknown command)
Yogesh1969 said:
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
Click to expand...
Click to collapse
But when I am executing other fastboot commands it halts the process between with error "FAILED (remote: unknown command)".
I have read about this error and people suggested that I need to get into "Download mode" not "fastboot/bootload". To get into "download" mode I tried pressing "VoulumeDown+Power+Home", but nothing happened, it simply restarted the phone.
Please advise.
-Aditi
So I was interested in getting a root, did fastboot boot twrp.img, the version you get from shakala's megaupload page and tried to do a mtp mount to copy the supersu in. That didn't work because I'm on mac and I rebooted... surprise phone doesn't boot. It's just stuck on the 'asus, in search of incredible' screen that comes up 1 second after booting.
Tried to instead flash twrp to recovery, no dice, black screen. Tried flash stock recovery from the shakala's page, I get the droid belly up with an exclamation mark over the open belly...
Tried fastboot boot twrp.img and then sideload the actual OTA firmware, no dice. It won't even try to flash and just gives the 1001 error.
I have tried and unpacked 3 different stock images I've found
UL-ASUS_A001-WW-14.1010.1702.36-user.zip
UL-ASUS_A001-WW-14.1010.1703.42-user.zip
UL-ASUS_A001-WW-14.1010.1704.46-user.zip
and flash the sytem.new.dat to the system partition, no dice again. Phone just doesn't boot.
TL;DR
Something got wonky, phone doesn't boot
Recovery is broken, flashing stock recovery from shakala's page produces belly-up-android image
Without stock recovery, I can't sideload a full system update...
Halp? Ideas?
Got a little bit progress...
The TWRP black screen can be fixed by just turning off the display via the power button and then pressing it again, and you can see the twrp. Looks like even the normal one
Next hurdle was that /cache and /system couldn't be mounted for sideloading so in the end I had to go to the adb shell and format them manually. Then the wiping of system was possible and there were no more errors from TWRP.
So I went ahead and tried sideloading again, it put the image in nicely and everything looks good. Go to reboot screen and it say 'no OS installed'.
I guess those 1.7G images don't exactly have the full OS so a /system formatted Zenfone 3 Ultra can't be restored from those?
Alrighty, got stuff working. Sharing for people who might run into this later.
At this time, you need the stock recovery working to be able to `adb sideload` a full image. The TWRP goes to 50% and then actually doesn't unconditionally push the stock ROM into the partition. I saw the difference when using TWRP/Stock Recovery.
My biggest failure was not to recognize that the green android belly up with an exclamation mark on top of it actually meant that the stock recovery was working. You have to do a little bit more finger juggling to actually enter the recover commands section of the recovery. Mainly after the android appears, volume up+power for a few seconds, release volume up. Illustrated here:
https://www.asus.com/zentalk/in/thread-121896-1-1.html
From the stock recovery, you can then wipe caches and start adb sideload, and using your pc to sideload the image (or from sd card if you so wish).
blosphere said:
I guess those 1.7G images don't exactly have the full OS so a /system formatted Zenfone 3 Ultra can't be restored from those?
Click to expand...
Click to collapse
I can testify that the 1.7G image contains a full OS on /system.
If you read META-INF/com/google/android/updater-script inside the UL-ASUS_A001-WW-14.1010.1704.46-user.zip, you will see the official recovery do use system.transfer.list and system.new.dat in the zip to flash /dev/block/bootdevice/by-name/system.
Recovery is broken, flashing stock recovery from shakala's page produces belly-up-android image
Click to expand...
Click to collapse
When you see the belly-up-android image, press Power + Volume-Up. The stock recovery menu comes up. I was confused at the beginning, too.
From you id Tokyo, did you buy the phone in Japan? If so, it is a JP_Phone, and need some tweak to the initrd in boot.img to flash WW firmwares.
Oh, glad to see you've already solved it! You might want to mark the thread title as "[SOLVED]".
I have flashed TWRP 3.3.1 successfully . after that I rebooted into TWRP and it does not enter its recovery UI. After that, I tried to reboot the phone but it goes to recover screen again without entering recovery UI. I can't open my phone now. please help.
At the beginning, after flashing the twrp it was showing only TWRP screen not the options. then i rebooted the system and the phone rebooted without any issue (till now, phone was ok). then I again flashed the twrp but it remained the same. after that i tried different command from the Powershell. (fastboot boot twrp.img) and it showed downloading. after waiting for 5 min, I just closed the PowerShell and tried to reboot. from that time I cannot boot my phone anymore. then i again flashed the recovery but could not boot the phone. when i triy to boot the phone it only shows the recovery screen. I've attached the commands that I used to flash TWRP. Please help me to solve the problem.
zahidhasanzahid said:
I have flashed TWRP 3.3.1 successfully . after that I rebooted into TWRP and it does not enter its recovery UI. After that, I tried to reboot the phone but it goes to recover screen again without entering recovery UI. I can't open my phone now. please help.
At the beginning, after flashing the twrp it was showing only TWRP screen not the options. then i rebooted the system and the phone rebooted without any issue (till now, phone was ok). then I again flashed the twrp but it remained the same. after that i tried different command from the Powershell. (fastboot boot twrp.img) and it showed downloading. after waiting for 5 min, I just closed the PowerShell and tried to reboot. from that time I cannot boot my phone anymore. then i again flashed the recovery but could not boot the phone. when i triy to boot the phone it only shows the recovery screen. I've attached the commands that I used to flash TWRP. Please help me to solve the problem.
Click to expand...
Click to collapse
Have you tried booting the recovery by pressing Power + Vol up?
zahidhasanzahid said:
I have flashed TWRP 3.3.1 successfully . after that I rebooted into TWRP and it does not enter its recovery UI. After that, I tried to reboot the phone but it goes to recover screen again without entering recovery UI. I can't open my phone now. please help.
At the beginning, after flashing the twrp it was showing only TWRP screen not the options. then i rebooted the system and the phone rebooted without any issue (till now, phone was ok). then I again flashed the twrp but it remained the same. after that i tried different command from the Powershell. (fastboot boot twrp.img) and it showed downloading. after waiting for 5 min, I just closed the PowerShell and tried to reboot. from that time I cannot boot my phone anymore. then i again flashed the recovery but could not boot the phone. when i triy to boot the phone it only shows the recovery screen. I've attached the commands that I used to flash TWRP. Please help me to solve the problem.
Click to expand...
Click to collapse
Now since you are bootlooping we would need to install MIUI back again, to do this download the MiFlash Tool and the fastboot ROM for the latest MIUI, now copy it's file path and paste in MiFlash Tool, also make sure it detects your phone, now in the bottom right corner there would be an option like flash_everything_except_internal (similar to this) so that the internal storage isn't erased, now flash the ROM and let the phone boot up atleast once.
Once that's done use this TWRP (https://forum.xda-developers.com/re...unofficial-twrp-3-3-1-proper-t3933531/page4), it has a fix for the encryption bug and won't lead to a bootloop (the password/code/pattern asked in it is the same as the phone's), now you have TWRP installed and running
Thanks for your support. I followed the instruction and bootup the phone. But I'm afraid of flashing TWRP ?
It worked. I installed TWRP without any issue . Thanks again ?
TWRP 3.3.1 has bug, reinstall TWRP 3.2.3 and boot to recovery and then reboot to system.
Naveenthemi said:
Now since you are bootlooping we would need to install MIUI back again, to do this download the MiFlash Tool and the fastboot ROM for the latest MIUI, now copy it's file path and paste in MiFlash Tool, also make sure it detects your phone, now in the bottom right corner there would be an option like flash_everything_except_internal (similar to this) so that the internal storage isn't erased, now flash the ROM and let the phone boot up atleast once.
Once that's done use this TWRP (https://forum.xda-developers.com/re...unofficial-twrp-3-3-1-proper-t3933531/page4), it has a fix for the encryption bug and won't lead to a bootloop (the password/code/pattern asked in it is the same as the phone's), now you have TWRP installed and running
Click to expand...
Click to collapse
I have now flashed TWRP. But my phone isn't booting into TWRP recovery and the power button and volume UP button is booting the phone into MIUI recovery. Also when booting into the system, it's asking for a password when I had no passwords on the device. Will MiFlash Tool help in this case??
mad_hat said:
I have now flashed TWRP. But my phone isn't booting into TWRP recovery and the power button and volume UP button is booting the phone into MIUI recovery. Also when booting into the system, it's asking for a password when I had no passwords on the device. Will MiFlash Tool help in this case??
Click to expand...
Click to collapse
The password is on the phone lock screen? In that case your device must have got encrypted, you might have to format all partitions and then flash with Mi Flash.Do have a try with MiFlash first, might help if it's not encrypted. Also make sure you used the right commands to flash the recovery, and use OrangeFox or Peter's.