Database Info

please help CM12.1 installing a big trouble

FRUSTRATING from 2weeks oh no!
1st rooted+su
2nd got twrp
3rd hard reset/ total data wiping
4th downloaded and tried roms of CM12 from hd.harald and wilson3q threads
and gapps from opengapps.org got 64arm pico zip
where did i go wrong
i tried many cm12 roms on xda fourum
but every things installed
apps optimization is also over
then it suddenly powered off
i booted it came as choose your language
touch didnt work and it sudddenly turned off

123kirangt said:
FRUSTRATING from 2weeks oh no!
1st rooted+su
2nd got twrp
3rd hard reset/ total data wiping
4th downloaded and tried roms of CM12 from hd.harald and wilson3q threads
and gapps from opengapps.org got 64arm pico zip
where did i go wrong
i tried many cm12 roms on xda fourum
but every things installed
apps optimization is also over
then it suddenly powered off
i booted it came as choose your language
touch didnt work and it sudddenly turned off
Click to expand...
Click to collapse
That is because you coming from miui7. Install fastboot 6.X, install twrp, reinstall custom rom. Should work. Make sure you fastboot flash your 6.X miui. Follow guide in this LINK

i think you should have gone for arm64 5.1 stock gapps
it did the work for me my mi4i is now running on CM12.1
thanks to @dh.harald & @omerjerk
now ready to try CM13

You must flash MIUI 6.X in order for it to work, else it won't boot.

Cyanogen Mod 6.0 for OPPO R7 PLUS

I apologize if this is posted, but we now have an official build of Marshmallow for our Oppo r7 Plus (F) Variant. link attachedhttp://download.cyanogenmod.org/?type=nightly&device=r7plus

Excellent! I am going to test it right now and will report!!!!
Update: I was on ColorOS, flashed cm13 recovery and done factory reset, formatting cache is taking around 8 minutes, is that normal?
Flashing ARM64 opengapps for 6.0 end up with error: E:Installation error in /sideload/package.zip (Status 255) - seems like recovery problem as many people report this issue. I only dont know if TWRP will work with CM13 rom

Personally I'm using a 12.1 recovery at the moment. The 13.0 recovery is still WIP AFAIK.
Gesendet von meinem R7plusf mit Tapatalk

Ok, will try cm12.1 recovery, what about gapps? Which one to use? Btw I have done factory reset again, flashed cm13 rom only, phone rebooted and loading apps (total of 87 I think), then done reboot, then only showing blue android logo for very long time, like 10 minutes followed with another "starting apps" screen with 21 left or so, now another reboot with blue android logo. Is this normal for MM roms? Still not finished.
EDIT: after another 5 minutes same screen appears with saying starting android... 21 apps left, blue android logo when done - seems to be as bootloop as it is going nowhere from here.
CM13 rom flashed fine over TWRP, flashing gaaps now seems to be alright as well (open_gapps-arm64-6.0-mini-20151218).

Very exited, good job

so far I am getting the boot-loop also. will wait to here what Nexus5-32GB will post (if any success with the cyanogen recovery) before reverting back

Sadly "Androis is starting... Starting apps" is last message I can see, the soft reboot then followed wit this bootloop. Same when flashed with and without gapps from TWRP, cm12.1 and cm13 recoveries.
When doing factory reset in CM12.1 recovery I get this:
-- Wiping data...
Formating /data...
E:Failed to start /data/data/org.cyanogenmod.audiofx
Formating /cache...

Guy's I got it to boot up and install so far everything seems to work okay (Minus minor distortion when automatically switching to landscape, portrait and at start up) . I am going to post a picture if I can. I believe the issues arise when we try updating to Marshmallow from lollipop and we have made major modifications. (for example I had lolli viper and a host of other customization's). I had to do a factory reset wipe and format. I then installed a backup that was untouched bone dry cyanogen mod (no g apps yet). let that boot-up and rebooted into recovery. I then downloading the nightly form (today) the 18th from the website with the marshmallow G-apps. Pushed to my sd card, wiped cache and installed the nightly and installed the correct marshmallow G-apps (ARM 64 6.0) right away. After this,I rebooted phone (it will take a while; almost as long as it did when the first nightly for lollipop came out and we flashed from color OS). It's up and running on my phone. I also still have and used the twrp recovery.

Nexus5-32GB said:
Sadly "Androis is starting... Starting apps" is last message I can see, the soft reboot then followed wit this bootloop. Same when flashed with and without gapps from TWRP, cm12.1 and cm13 recoveries.
When doing factory reset in CM12.1 recovery I get this:
-- Wiping data...
Formating /data...
E:Failed to start /data/data/org.cyanogenmod.audiofx
Formating /cache...
Click to expand...
Click to collapse
check out my post after this (well before now)

coled3 said:
Guy's I got it to boot up and install so far everything seems to work okay (Minus minor distortion when automatically switching to landscape, portrait and at start up) . I am going to post a picture if I can. I believe the issues arise when we try updating to Marshmallow from lollipop and we have made major modifications. (for example I had lolli viper and a host of other customization's). I had to do a factory reset wipe and format. I then installed a backup that was untouched bone dry cyanogen mod (no g apps yet). let that boot-up and rebooted into recovery. I then downloading the nightly form (today) the 18th from the website with the marshmallow G-apps. Pushed to my sd card, wiped cache and installed the nightly and installed the correct marshmallow G-apps (ARM 64 6.0) right away. After this,I rebooted phone (it will take a while; almost as long as it did when the first nightly for lollipop came out and we flashed from color OS). It's up and running on my phone. I also still have and used the twrp recovery.
Click to expand...
Click to collapse
going to give this a go, but I was doing factory reset and format as well, is that mean the factory reset doesnt work as it should? Flashing cm 12 rom first to be able to boot to cm13 rom later is very strange way when you think about it

Nexus5-32GB said:
going to give this a go, but I was doing factory reset and format as well, is that mean the factory reset doesnt work as it should? Flashing cm 12 rom first to be able to boot to cm13 rom later is very strange way when you think about it
Click to expand...
Click to collapse
indeed i agree 100%. I really think it boils down to if we have any customization. I had the same error (in regards to the audio FX) You should try installing a fresh clean cyanogen nightly without g-apps or any mods. Let it boot-up and try the steps i mentioned. do you have an audio customization or any that might have changed something (it shouldn't matter but I'm considering any and everything)? If this is the case the recovery might need tweaking as that would mean somehow or someway it doesn't allow us to properly wipe and format (another consideration). I really hope you and everybody else can also update. I'm trying to upload screenshots of my phone

coled3 said:
indeed i agree 100%. I really think it boils down to if we have any customization. I had the same error (in regards to the audio FX) You should try installing a fresh clean cyanogen nightly without g-apps or any mods. Let it boot-up and try the steps i mentioned. do you have an audio customization or any that might have changed something (it shouldn't matter but I'm considering any and everything)? If this is the case the recovery might need tweaking as that would mean somehow or someway it doesn't allow us to properly wipe and format (another consideration). I really hope you and everybody else can also update. I'm trying to upload screenshots of my phone
Click to expand...
Click to collapse
I was on ColorOS while ago, went to TWRP and done manual wipe of Dalvik, System, Data and Cache. Installed latest cm12.1 rom without any gapps and let it boot up to home screen. Went back to TWRP and done same wipe as before. Installed cm13 without any gapps and this time I got little further than ussualy, I could see message "finishing boot" but again end up in bootloop as before. So no luck in my case...
About the error in TWRP: yes I was using viper4android before and it seems the TWRP recovery doesnt wipe the device right way - well actually not even CM recoveries can I think.

Nexus5-32GB said:
I was on ColorOS while ago, went to TWRP and done manual wipe of Dalvik, System, Data and Cache. Installed latest cm12.1 rom without any gapps and let it boot up to home screen. Went back to TWRP and done same wipe as before. Installed cm13 without any gapps and this time I got little further than ussualy, I could see message "finishing boot" but again end up in bootloop as before. So no luck in my case...
About the error in TWRP: yes I was using viper4android before and it seems the TWRP recovery doesnt wipe the device right way - well actually not even CM recoveries can I think.
Click to expand...
Click to collapse
The events you listed I went through the same exact sequence. Keep trying it took for me; after a painstaking install experience of course. Also you're right Cyanogen recovery doesn't allow full wipe and install.

coled3 said:
The events you listed I went through the same exact sequence. Keep trying it took for me; after a painstaking install experience of course. Also you're right Cyanogen recovery doesn't allow full wipe and install.
Click to expand...
Click to collapse
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research

Nexus5-32GB said:
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research
Click to expand...
Click to collapse
let me know if it ends up working. I also had to hold power button to restart a couple of times after installing 13 and eventually took. Fingers crossed for you!!!!! "GO NEXUS.. GO ..GO.. GO NEXUS " HEHE

coled3 said:
let me know if it ends up working. I also had to hold power button to restart a couple of times after installing 13 and eventually took. Fingers crossed for you!!!!! "GO NEXUS.. GO ..GO.. GO NEXUS " HEHE
Click to expand...
Click to collapse
am not gonna mess with restarts and so on. What I just did was, I installed the cm12.1 and tried to run system update which downloaded the cm13 rom and flashed it in twrp ending with same bootloop. I dont really know how devs could make this working on their phones at all.

Nexus5-32GB said:
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research
Click to expand...
Click to collapse
pls help me with the stock recovery ..before flashing stock recovery should i clean wipe using twrp..what all should i select for a clean wipe..i had issues with flashing stock recovery..when i selected wipe data and cache in oppo stock recovery it wipes for a secnd and then swithc off..could not get beyond that..after many twrp boot loops now i have a cm12 working ..but battery is very poor..so i want to go back to stock..please tell the steps..

Nexus5-32GB said:
am not gonna mess with restarts and so on. What I just did was, I installed the cm12.1 and tried to run system update which downloaded the cm13 rom and flashed it in twrp ending with same bootloop. I dont really know how devs could make this working on their phones at all.
Click to expand...
Click to collapse
Well, I took my 12.1 installation without any wipe, went to CM recovery from 12.1, installed my (self compiled at that time) build + opengapps (it's important to install those before booting M for the first time), booted, done. I don't have any /system mods though.
I guess I'll try the nightly and see what happens there. Did anybody of you get a logcat of the failed boot attempts?
Gesendet von meinem R7plusf mit Tapatalk

unni84kollam said:
pls help me with the stock recovery ..before flashing stock recovery should i clean wipe using twrp..what all should i select for a clean wipe..i had issues with flashing stock recovery..when i selected wipe data and cache in oppo stock recovery it wipes for a secnd and then swithc off..could not get beyond that..after many twrp boot loops now i have a cm12 working ..but battery is very poor..so i want to go back to stock..please tell the steps..
Click to expand...
Click to collapse
Just follow this quide with flashing twrp, only instead of twrp flash the stock recovery image. http://forum.xda-developers.com/showpost.php?p=63189590&postcount=5 Sorry, there is only boot command, you should type "fastboot flash recovery stock.recovery.img" - when "stock.recovery.img" is a filename of your stock recovery downloaded on your computer.
No need for wipe when installing recovery. I recon to install stock recovery and then install stock ColorOS from it, let it boot, install twrp later and do what you want then.

Looks like it's broken for everyone. I tried multiple recoverys, full wipes including /system and no joy. Guess we'll just have to wait!

No Response ,phone freeze on CM 13 ,CM12.1 Slim Bit, Resurrection Remix Help...

Hi,
Phone not responding after some minutes . only black screen no "wake up" on anyway. need to forcefully restart.
Currently i am using SlimBit [6.0.1_r12][AOSP][LAYERS][11-Feb]
also tried Resurrection Remix v5.6.3 Marshmellow
Installed using TWRP v3.0 Recovery by clean slate (Wipe Data/System,cache,dalvic including internal storage data)
also installed from MIUI v6.6.10 base version also.
Same problem rises again and again in all CM,ASOP version i installed.
Only without "GAPPS " i can use my device for few Days.
Is that any correct installation method, other than described in each rom thread.???
I need Big help....
Thanks
Sabu John
:crying::crying::crying:

sabujkvkm said:
Hi,
Phone not responding after some minutes . only black screen no "wake up" on anyway. need to forcefully restart.
Currently i am using SlimBit [6.0.1_r12][AOSP][LAYERS][11-Feb]
also tried Resurrection Remix v5.6.3 Marshmellow
Installed using TWRP v3.0 Recovery by clean slate (Wipe Data/System,cache,dalvic including internal storage data)
also installed from MIUI v6.6.10 base version also.
Same problem rises again and again in all CM,ASOP version i installed.
Only without "GAPPS " i can use my device for few Days.
Is that any correct installation method, other than described in each rom thread.???
I need Big help....
Thanks
Sabu John
:crying::crying::crying:
Click to expand...
Click to collapse
Try using the base rom as v5.6.11 and try using the old twrp v2.8.7

I have same issue. Nandroid backup of CM12, Mowkee, Resurection does not successfully load anymore. While the MIUI 7 v7.1.1.0 nandroids still load with no problem. I used to load my other custom rom nandroid with no problem. I did also install the new ver3 TWRP but tried reverting back to Magdag Mi4i TWRP but still same issue.

Try provide with a logcat, might be more useful in helping you.

No other custom rom is working on my mi4i
After clearing the system data cache . . I installed cm13 using twrp by maddag...after successfully installed the rom and gapps when it finishes boot and the welcome screen appears then its stuck in the welcome screen for 5secs then reboots them after booting up again on welcome screen again restarts..it is happening every time.. So I installed cm12 and after finishing boot...again same problem so I reverted back to miui by installing the rom via fast boot by mi pc suite and it booted successfully without any problems.. And in miui rom my mob laggs too much and the benchmark in antutu is 29000...I think I need to replace the mobile phone..still 2 months warranty remaining..?

sabujkvkm said:
Hi,
Phone not responding after some minutes . only black screen no "wake up" on anyway. need to forcefully restart.
Currently i am using SlimBit [6.0.1_r12][AOSP][LAYERS][11-Feb]
also tried Resurrection Remix v5.6.3 Marshmellow
Installed using TWRP v3.0 Recovery by clean slate (Wipe Data/System,cache,dalvic including internal storage data)
also installed from MIUI v6.6.10 base version also.
Same problem rises again and again in all CM,ASOP version i installed.
Only without "GAPPS " i can use my device for few Days.
Is that any correct installation method, other than described in each rom thread.???
I need Big help....
Thanks
Sabu John
:crying::crying::crying:
Click to expand...
Click to collapse
Try use old TWRP, if you got hard error flash MIUI V6.6.6 first.
astro49 said:
I have same issue. Nandroid backup of CM12, Mowkee, Resurection does not successfully load anymore. While the MIUI 7 v7.1.1.0 nandroids still load with no problem. I used to load my other custom rom nandroid with no problem. I did also install the new ver3 TWRP but tried reverting back to Magdag Mi4i TWRP but still same issue.
Click to expand...
Click to collapse
Don't forget to flash MIUI V.6.6.6 (or V.6.6.6 patch ROM) first before you restore your nandroid backup like CM12, Mowkee, Resurection if you from new MIUI ROM.
If you want to restore MIUI7 nandroid backup from CM12 you need to flash MIUI7 patch ROM first.
RIYAN X55TU said:
After clearing the system data cache . . I installed cm13 using twrp by maddag...after successfully installed the rom and gapps when it finishes boot and the welcome screen appears then its stuck in the welcome screen for 5secs then reboots them after booting up again on welcome screen again restarts..it is happening every time.. So I installed cm12 and after finishing boot...again same problem so I reverted back to miui by installing the rom via fast boot by mi pc suite and it booted successfully without any problems.. And in miui rom my mob laggs too much and the benchmark in antutu is 29000...I think I need to replace the mobile phone..still 2 months warranty remaining..
Click to expand...
Click to collapse
Don't forget to flash MIUI V.6.6.6 (or V.6.6.6 patch ROM) first before you flash to CM13, if not you'll get bootloop. If you use default init.qcom.post_boot.sh and your phone heat up it will lags, so use edited init.qcom.post_boot.sh.

Confirmed
Glembozt said:
Try use old TWRP, if you got hard error flash MIUI V6.6.6 first.
Click to expand...
Click to collapse
I can confirm that this DID magically works!
No need to use the old TWRP, just flash MIUI V6.6.6(I used the fastboot package[1], not sure if recovery package works) then flash TWRP then flash other custom OSes.
[1] bigota.d.miui.com/V6.6.6.0.LXIMICF/ferrari_global_images_V6.6.6.0.LXIMICF_20150521.0000.3_5.0_global_46b5474265.tgz

[Help] Flashing 1st Gen Moto G (XT1031) Stock to CM12.1 or CM13, never boots

I posted this over on the CM forums, but wanted to post here as well for visibility.
I have multiple (read as 30+) 1st Gen Boost Moto Gs (XT1031) and this has been a problem on every.... single.... one...
Stock OS Info
Android Version: 4.4.2
Baseband version: MSM8626BP_1032.355.66.00R
Kernel version: 3.4.0-gc6fc9e1-00001-gf3bf628
System version: 175.44.1.falcon_cdma.Boost.en.US
Build number: KXB20.9-1.10-1.18-1.1
Bootloader: 41.1A
Recovery: twrp-2.8.7.0.-falcon_STOCK_NOTHEME
I've also tested with the Stock 4.4.4 and 5.1 Soak Test OS versions, both have the same results as well.
Additionally, this happens regardless of whether GAPPS is flashed or not.
I've tried the following, and ALWAYS results in an endless boot that just constantly stays on the CM Android head boot animation unless I flash & boot to CM11 first:
(Note: A TWRP Factory Reset is performed before flashing each new ROM)
CM11 - cm-11-20140504-SNAPSHOT-M6-falcon.zip
Stock -> CM11 = Boots and works fine
CM12.1 - cm-12.1-20151115-NIGHTLY-falcon.zip
Stock -> CM12.1 = Endless Boot
Stock -> CM11 (without booting to OS) -> CM12.1 = Endless Boot
Stock -> CM11 (Booted once) -> CM12.1 = Boots and works fine
CM13 (all nightly versions)
Stock -> CM13 = Endless Boot
Stock -> CM11 (without booting to OS) -> CM13 = Endless boot
Stock -> CM11 (Booted once) -> CM13 = Boots and works fine
So...The only way that I can get these to boot, is if I flash CM11 AND boot into it once and THEN flash CM12.1/CM13.
What is it about the first boot of CM11 that makes CM12.1 and CM13 work? any why doesn't direct from Stock -> CM12.1/CM13 work??? Is there a Kernel or something that gets installed when CM11 boots or something?
This is driving me insane. Please help me figure this out so that I can flash directly from Stock -> CM12.1/CM13.
---
Here is an example of exactly how to reproduce this problem. From the Stock ROM, do the following:
{Unlock Bootloader}
{Enable USB Debugging}
adb reboot bootloader
fastboot flash motoboot motoboot_41.1A.img
fastboot flash logo logo.bin
fastboot flash recovery twrp-2.8.7.0.-falcon_STOCK_NOTHEME.img
fastboot reboot
adb reboot recovery
adb shell twrp wipe factoryreset
adb push cm-12.1-20151115-NIGHTLY-falcon.zip /sdcard/
adb shell twrp install /sdcard/cm-12.1-20151115-NIGHTLY-falcon.zip
adb reboot
Click to expand...
Click to collapse
...Device never boots, and only stays on the CM logo animation.

I've just finished updating from Stock 5.1 (XT1033) to CM 13
Here's what I've done
1. Updated to the latest TWRP recovery
2. Copied the latest CM 13 nightly and Gapps (Pico) to internal storage
3. Reboot to recovery
4. Performed an advanced wipe. Wiping /system, /cache and /dalvik-cache
5. Performed a Factory Reset
6. Flashed both CM 13 and Gapps
7. Reboot
Wait for a few minutes.

mardobloom said:
I've just finished updating from Stock 5.1 (XT1033) to CM 13
Here's what I've done
1. Updated to the latest TWRP recovery
2. Copied the latest CM 13 nightly and Gapps (Pico) to internal storage
3. Reboot to recovery
4. Performed an advanced wipe. Wiping /system, /cache and /dalvik-cache
5. Performed a Factory Reset
6. Flashed both CM 13 and Gapps
7. Reboot
Wait for a few minutes.
Click to expand...
Click to collapse
Exact same steps on my XT1031, waited 6 hours, still didn't boot.
But if I flash CM11, boot to it once, then factory reset and install CM13... it will boot just fine. What magic does CM11 do that CM12.1/CM13 aren't doing?!
As a side note, the TRWP Factory Reset option wipes /system /cache and /dalvik-cache... so step #4 is redundant.... but I did it anyways.
Edit: I guess I skipped step #1 ... didn't realize that TWRP 3.0.2.0 was available for "falcon". I'll try this later tonight and see if it fixes the issue or not.
https://dl.twrp.me/falcon/

twig123 said:
As a side note, the TRWP Factory Reset option wipes /system /cache and /dalvik-cache... so step #4 is redundant.... but I did it anyways.
Click to expand...
Click to collapse
I followed the steps to perform a clean update from the official thread of CM 13 but when I tried to install the zip file it says that the data is incompatible and I needed to perform a factory reset. So that's why I've added that additional step so that there won't be any problems while installing CM 13. :laugh:
twig123 said:
Edit: I guess I skipped step #1 ... didn't realize that TWRP 3.0.2.0 was available for "falcon". I'll try this later tonight and see if it fixes the issue or not.
https://dl.twrp.me/falcon/
Click to expand...
Click to collapse
Okay try first with that one i.e. TWRP 3.02.0. If that doesn't work then maybe you can try this one from here :- http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621 <------- This one worked fine for me i.e twrp-3.0.0.0_2-falcon following the above steps which I've mentioned.
P.S. I'm currently on baseband 1032.3116.98.00R - Retail Asia

mardobloom said:
I followed the steps to perform a clean update from the official thread of CM 13 but when I tried to install the zip file it says that the data is incompatible and I needed to perform a factory reset. So that's why I've added that additional step so that there won't be any problems while installing CM 13. :laugh:
Okay try first with that one i.e. TWRP 3.02.0. If that doesn't work then maybe you can try this one from here :- http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621 <------- This one worked fine for me i.e twrp-3.0.0.0_2-falcon following the above steps which I've mentioned.
P.S. I'm currently on baseband 1032.3116.98.00R - Retail Asia
Click to expand...
Click to collapse
Nope. Flashed back to stock to test, updated to TWRP 3.0.2.0, attempted to flash to the latest CM13 nightly... still endless boot (waited 30min and it just stayed on the boot animation).
I'll try the recovery you mentioned later.... although, I also tried CM's own Nightly recovery... and the same thing happens with that as well.

I tried with the recovery you mentioned, and the same thing happens.
However, the story unfolds...
Recovery log when flashing from Stock-to-CM11:
http://pastebin.com/M0EGdLwu
Recovery log when flashing from Stock-to-CM12.1:
http://pastebin.com/HaderDW2
In the Stock-to-CM12.1 log.... it doesn't appear that anything is copied! if you look at the Stock-to-CM11 log, after the "Installing zip file '/sdcard/cm-11-20140504-SNAPSHOT-M6-falcon.zip'" line, it has a bunch of "minzip: Extracted file" lines. Comparing that to the Stock-to-CM12.1 long, none of those such lines exist in the log! I see the CM12.1 ROM file has a "system.new.dat" file, instead of all of the files extracted in the "system" folder, like the CM11 ROM has... not sure if that is causing the problem or not.
If none of the files are getting copied, that would explain why it never boots.... but this doesn't tell me how to fix it... or why CM11 doesn't have a problem, but CM12.1 and CM13 DO have a problem.

twig123 said:
I tried with the recovery you mentioned, and the same thing happens.
However, the story unfolds...
Recovery log when flashing from Stock-to-CM11:
http://pastebin.com/M0EGdLwu
Recovery log when flashing from Stock-to-CM12.1:
http://pastebin.com/HaderDW2
In the Stock-to-CM12.1 log.... it doesn't appear that anything is copied! if you look at the Stock-to-CM11 log, after the "Installing zip file '/sdcard/cm-11-20140504-SNAPSHOT-M6-falcon.zip'" line, it has a bunch of "minzip: Extracted file" lines. Comparing that to the Stock-to-CM12.1 long, none of those such lines exist in the log! I see the CM12.1 ROM file has a "system.new.dat" file, instead of all of the files extracted in the "system" folder, like the CM11 ROM has... not sure if that is causing the problem or not.
If none of the files are getting copied, that would explain why it never boots.... but this doesn't tell me how to fix it... or why CM11 doesn't have a problem, but CM12.1 and CM13 DO have a problem.
Click to expand...
Click to collapse
Backup first and try to restore your phone to stock firmware using the instructions over here. ----------> http://forum.xda-developers.com/showthread.php?p=47820707#post47820707
And choose the firmware version which is related to your phone. They will be something like this:-
XT1031_FALCON_BOOST_5.1_LPB23.13-56_cid9_CFC.xml.zip
XT1031_FALCON_REPW_5.1_LPB23.13-51-R.10_cid6_CFC.xml.zip
XT1031_FALCON_USC_5.1_LPB23.13-33.6_cid9_CFC.xml.zip
XT1031_FALCON_USC_5.1_LPBS23.13-33.6-2_cid9_CFC.xml.zip

mardobloom said:
Backup first and try to restore your phone to stock firmware using the instructions over here. ----------> http://forum.xda-developers.com/showthread.php?p=47820707#post47820707
And choose the firmware version which is related to your phone. They will be something like this:-
XT1031_FALCON_BOOST_5.1_LPB23.13-56_cid9_CFC.xml.zip
XT1031_FALCON_REPW_5.1_LPB23.13-51-R.10_cid6_CFC.xml.zip
XT1031_FALCON_USC_5.1_LPB23.13-33.6_cid9_CFC.xml.zip
XT1031_FALCON_USC_5.1_LPBS23.13-33.6-2_cid9_CFC.xml.zip
Click to expand...
Click to collapse
Thanks for the suggestion, but I've already flashed to stock (XT1031_FALCON_BOOST_5.1 in this case).
The issue is coming FROM stock to CM12.1 or CM13 that is the problem, but Stock->CM11->CM12.1/CM13 works fine.
I don't want to have to install CM11 every time just to get a bootable rom... :-\

twig123 said:
Thanks for the suggestion, but I've already flashed to stock (XT1031_FALCON_BOOST_5.1 in this case).
The issue is coming FROM stock to CM12.1 or CM13 that is the problem, but Stock->CM11->CM12.1/CM13 works fine.
I don't want to have to install CM11 every time just to get a bootable rom... :-\
Click to expand...
Click to collapse
Save the recovery log while upgrading from CM11 to CM 12.1 to see what's the difference between that one which works and Stock to CM12.1/13

After playing with trying to flash CM13 directly for quite a long time.... I've come to the conclusions that something with the partition wipes don't actually work within the CM13 setup script, nor from Custom Recovery!
However, I found a workaround! Wiping the partitions from the Bootloader, instead of from Custom Recovery, allows a flash of CM13 to boot properly!
(The question still stands as to why CM11 doesn't have this issue, but CM12.1 and CM13 do...... but I have a workaround, so I'm not too worried about it)
I made a Windows Batch script to automate this flashing process, which I posted over on the CM Forum:
https://forum.cyanogenmod.org/topic...-to-cm121-or-cm13-never-boots/#comment-601380

Bootloop with every Android N Roms

After flashing android n rom my devices stuck in boot loop
This is not the case with single rom. I am getting boot loop for every android n roms.
I am currently using cyanogemmod 6.0.1.
please help if you have solution.

Dush4711 said:
After flashing android n rom my devices stuck in boot loop
This is not the case with single rom. I am getting boot loop for every android n roms.
I am currently using cyanogemmod 6.0.1.
please help if you have solution.
Click to expand...
Click to collapse
Make you are flashing it correctly.
Wait for at least 20 30 mins.
Reply so i can help you further.
Also mention the steps you did.

ethicalhacker365 said:
Make you are flashing it correctly.
Wait for at least 20 30 mins.
Reply so i can help you further.
Also mention the steps you did.
Click to expand...
Click to collapse
Steps:
Wipe dalvik cache,cache,data,system.
Installing zip.
Reboot to system.
After that phone stuck at boot logo and after some time I felt vibration but phone is not booting up.
I forgot to mention that this problem is with only android n ROMs and
All android m ROMs are working perfectly.
Thank you.

Dush4711 said:
Steps:
Wipe dalvik cache,cache,data,system.
Installing zip.
Reboot to system.
After that phone stuck at boot logo and after some time I felt vibration but phone is not booting up.
I forgot to mention that this problem is with only android n ROMs and
All android m ROMs are working perfectly.
Thank you.
Click to expand...
Click to collapse
I would recommend to follow the steps wisely exactly as i have written.
First copy the rom and gapps file to internal storage and remove sd card and sim cards.
I would recommend rr 5.8.0. It is the best custom ROM i know.
Factory reset.
Go to advanced wipe.
Select only davlik/art cache
I think that you select system and data that is the main cause of the problem.
Now install the rom.
Ike of helpful.

ethicalhacker365 said:
I would recommend to follow the steps wisely exactly as i have written.
First copy the rom and gapps file to internal storage and remove sd card and sim cards.
I would recommend rr 5.8.0. It is the best custom ROM i know.
Factory reset.
Go to advanced wipe.
Select only davlik/art cache
I think that you select system and data that is the main cause of the problem.
Now install the rom.
Ike of helpful.
Click to expand...
Click to collapse
Thanks
Will try after 2 days as I am currently out of town.
Reply you later
Please don't mind.

U are not doing it correctly.
Goto-twrp-wipedata-advanced-check(dalvik/art,Data & Internal Storage) dont check system.
After it Flash with any Custom Rom
Then Wipe-dalvik/art,Data & Internal Storage) uncheck system
Flash Gapps
Again Wipe-dalvik/art,data & internal storage)
Reboot to System
Wait Aleast (10-15)-For me After Flashing 6.0.1 Cyanogenmod from Official Website.
Finish(You have no problem of bootloop)
Hits thanks if you solve this way.

None of the solutions mentioned above worked for me...and the bootloop is only with Android N Roms only. Ihave also tried the official Lineage Os for Yu Yunique, it is also stucking in bootloop. All roms other than Android N (Marshmallow , lollipop ) are working fine.

dh.y said:
None of the solutions mentioned above worked for me...and the bootloop is only with Android N Roms only. Ihave also tried the official Lineage Os for Yu Yunique, it is also stucking in bootloop. All roms other than Android N (Marshmallow , lollipop ) are working fine.
Click to expand...
Click to collapse
Bro search on google Phantom Kernel jalebi. You will get 31st dec, 2016 build of phantom on android file host.
Install rom.
install gapps.
at last install phantom kernel.
rom will boot....

ankitdhimancr said:
Bro search on google Phantom Kernel jalebi. You will get 31st dec, 2016 build of phantom on android file host.
Install rom.
install gapps.
at last install phantom kernel.
rom will boot....
Click to expand...
Click to collapse
Yap it boots but problem is battery discharged within 1 hour

Yeah..phantom kernel will work but on other hand this kernel eats up battery and take to much time on charging usually 3-4 hours

Try censium kernel