Related
I have been using YU Yunicorn for the past 1 year. It was great untill one day the battery % kept dropping instantly to 0. I had my phone flashed at the service center and it was normal again. But from the past 2 months the battery wouldn't charge after 88% , I had my phone flashed again the charging issue was solved but I noticed the battery % was dropping abruptly at certain percentages.
I think that it is a software related problem but I need someone to confirm it.
Thank you.
Anyone???
Same here bro
Sarath_Chandra said:
Anyone???
Click to expand...
Click to collapse
Which Android version are you using??
hateis said:
Which Android version are you using??
Click to expand...
Click to collapse
MM
mayur badam said:
MM
Click to expand...
Click to collapse
Try switching back to LP
Isn't there any other solution
mayur badam said:
Isn't there any other solution
Click to expand...
Click to collapse
What is your version of marshmallow ???
Marshmallow 6.0
Sarath_Chandra said:
Marshmallow 6.0
Click to expand...
Click to collapse
What is your build number??
Find it in settings>about phone , there you can find it..
Yu5530_sw_v046_hw_m13_16012017
Sarath_Chandra said:
Yu5530_sw_v046_hw_m13_16012017
Click to expand...
Click to collapse
You are not on the latest update available ...
Updating your device will solve the problem
Hello,
My yunicorn doesn't charge after 88 percentage,did factory reset couple of times.please suggest a solution
girishp1 said:
Hello,
My yunicorn doesn't charge after 88 percentage,did factory reset couple of times.please suggest a solution
Click to expand...
Click to collapse
Is your build number Yu5530_sw_v046_hw_m13_16012017???
hateis said:
Is your build number Yu5530_sw_v046_hw_m13_16012017???
Click to expand...
Click to collapse
Hi,
It is Yu5530_SW_V049_HW_M13_18022017
girishp1 said:
Hi,
It is Yu5530_SW_V049_HW_M13_18022017
Click to expand...
Click to collapse
You are still not on the latest version ...
As mine is V054 and it's working fine
hateis said:
You are still not on the latest version ...
As mine is V054 and it's working fine
Click to expand...
Click to collapse
Hi,
Can you let me know how to update it?, Checked system updates didn't see any update
girishp1 said:
Hi,
Can you let me know how to update it?, Checked system updates didn't see any update
Click to expand...
Click to collapse
Download>>https://drive.google.com/file/d/0B6Uuxlpt9hk8SHVuOHpaVVUzNzg/view?usp=drivesdk
Place it in your sd card and sd card in phone
Reboot into recovery mode [ power off device and then press power+volume up button till you see yunicorn]
Select apply update from SD card
Select the file(place the file in a folder named 'a' so that you can easily find it)
Let the process complete
It may take 10 - 15minfor the process
It may take 10 -15 min for boot
:good:
I need a verify adcense account google adsense and other company which is provides adsense account.
hateis said:
Download>>https://drive.google.com/file/d/0B6Uuxlpt9hk8SHVuOHpaVVUzNzg/view?usp=drivesdk
Place it in your sd card and sd card in phone
Reboot into recovery mode [ power off device and then press power+volume up button till you see yunicorn]
Select apply update from SD card
Select the file(place the file in a folder named 'a' so that you can easily find it)
Let the process complete
It may take 10 - 15minfor the process
It may take 10 -15 min for boot
:good:
Click to expand...
Click to collapse
Tried it. No change. Still the same...
Good night guys, I'm from Brazil.
I really need your help.
I recently bought the Honor 8 FRD-AL10 by Gearbest
Everything perfect with this phone, only 2 days ago I was using HiSuite on my computer, and it has an option to update the system.
I clicked on this option, and it started to update to this version: frd-l19c432b389, so it ended he hung up, started to install the updates, but did not boot anymore, it always starts. And then restarted again.
Detail, I can not enable anything about USB debugging, or anything like this
can you help me please
Rommco05 said:
Can you boot to recovery? If yes try make factory reset
Click to expand...
Click to collapse
do this,but how the hisuite said to rebrand the al10 to frdl19
Rommco05 said:
Yes this interesting, new Hisuite feature? I dont think so, something must be wrong maybe here is time to use warranty
Click to expand...
Click to collapse
Yes.bro i didn't seen the feature before
Rommco05 said:
Can you boot to recovery? If yes try make factory reset
Click to expand...
Click to collapse
Already yes
Have you tried all the possible options?
Reset, wipe chache, nothing else works, always takes me to the screen of honor and always reinitiating
Let's say my phone was downloading Android 10 in the background... I didn't know, and for some reason wanted to reboot or turn the phone off.
Will the download resume afterwards or will I lose the update permanently?
BRZ_Speedster said:
Let's say my phone was downloading Android 10 in the background... I didn't know, and for some reason wanted to reboot or turn the phone off.
Will the download resume afterwards or will I lose the update permanently?
Click to expand...
Click to collapse
It will resume, but maybe not instantly. Never experienced this, make sure however your phone doesn`t reboot/turn-off during the installation of an update.
gee2012 said:
It will resume, but maybe not instantly. Never experienced this, make sure however your phone doesn`t reboot/turn-off during the installation of an update.
Click to expand...
Click to collapse
Thanks
BRZ_Speedster said:
Thanks
Click to expand...
Click to collapse
You're welcome
It should be fine even if you restart in the middle of the update. We have A/B partitioning so it should just boot to the current slot again if the update didn't finish correctly.
I wouldn't wanna try it myself though But that's how it's intended to work afaik.
downgraded p40 pro using hiproxy now stuck on rebooting from homescreen every 20 seconds.
i want to upgrade to another firmware but how would it be possible if the download/update doesnt finish and disconnects.
I suspect you flashed a wrong LGRPx base for your device variant.
oslo83 said:
I suspect you flashed a wrong LGRPx base for your device variant.
Click to expand...
Click to collapse
i guess so i lost my imei but still can login and see my homescreen and open close apps like normal its just doesnt last more than 20 seconds and reboots again. how i can recover from this? planned on installing another firmware but not possible because when downloading a new firmware it disconnects when it reboots.
follow this link
https://www.youtube.com/watch?v=fDlpdp4uvhM&t=314s&ab_channel=E-GotTech
alleshi said:
follow this link
https://www.youtube.com/watch?v=fDlpdp4uvhM&t=314s&ab_channel=E-GotTech
Click to expand...
Click to collapse
thanks but that is using hisuite which will not working because every 20 seconds my phone reboots
xnostra said:
thanks but that is using hisuite which will not working because every 20 seconds my phone reboots
Click to expand...
Click to collapse
Use below link for service firmware (dload firmware). Whole guide written there how to use.
https://forum.xda-developers.com/android/apps-games/googlefier-install-gms-huawei-honor-t4180485
I don`t know but after rebooting I get an error....
goldybewon said:
Use below link for service firmware (dload firmware). Whole guide written there how to use.
https://forum.xda-developers.com/android/apps-games/googlefier-install-gms-huawei-honor-t4180485
Click to expand...
Click to collapse
How do you know what firmware you have to put there?
base version ...
cust version ...
preload version ...
ELS-NX9 10.1.0.154( C432E8R4P1) GPU Turbo
medved6969 said:
How do you know what firmware you have to put there?
base version ...
cust version ...
preload version ...
ELS-NX9 10.1.0.154( C432E8R4P1) GPU Turbo
Click to expand...
Click to collapse
Follow this guide to know what is your cust.
https://youtu.be/uIUiyiv2nbQ
goldybewon said:
Follow this guide to know what is your cust.
https://youtu.be/uIUiyiv2nbQ
Click to expand...
Click to collapse
after installing the files
base 2020.08.14 ELS-LGRP4-OVS 10.1.0.154
Cust 2020.03.30 ELS-N29-CUST 10.1.0.8 (C432)
Preload 2020.03.05 ELS-N29-PRELOAD 10.1.0.1 (C432R4)
the phone behaves normally after starting, wifi works ok, but after about 30 minutes the wifi turns itself off and the camera stops working, it is not possible to connect to the internet via data,
can anyone advise me please?
medved6969 said:
after installing the files
base 2020.08.14 ELS-LGRP4-OVS 10.1.0.154
Cust 2020.03.30 ELS-N29-CUST 10.1.0.8 (C432)
Preload 2020.03.05 ELS-N29-PRELOAD 10.1.0.1 (C432R4)
the phone behaves normally after starting, wifi works ok, but after about 30 minutes the wifi turns itself off and the camera stops working, it is not possible to connect to the internet via data,
can anyone advise me please?
Click to expand...
Click to collapse
Factory reset and Star fresh. It will solve many problems.
goldybewon said:
Factory reset and Star fresh. It will solve many problems.
Click to expand...
Click to collapse
which means Star fresh ?
wipe cache + factory reset and still the same error
accidently installed wrong version of OS even Firmware Finder approved it for installation, now my mobile reboots after every 20 seconds ....
any solution ????
KKYASIR said:
accidently installed wrong version of OS even Firmware Finder approved it for installation, now my mobile reboots after every 20 seconds ....
any solution ????
Click to expand...
Click to collapse
try the latest version of FW again
medved6969 said:
try the latest version of FW again
Click to expand...
Click to collapse
its restarting after every 20 seconds , cant connect it to Hisuit more then this , how its possible to install lastest version ..
already did factory reset, clear cache , emergency recovery also not working ...
KKYASIR said:
its restarting after every 20 seconds , cant connect it to Hisuit more then this , how its possible to install lastest version ..
already did factory reset, clear cache , emergency recovery also not working ...
Click to expand...
Click to collapse
can it access the menu via 2846579 ... restore factory settings?if this doesn't help you then I probably won't say the name via the USB key I don't know if it can be written here so that it's not an advertisement, testpoint ........
medved6969 said:
which means Star fresh ?
wipe cache + factory reset and still the same error
Click to expand...
Click to collapse
Yes it is. From my point of view service firmware do the job. I have personally contacted service engineer of Huawei service center. If in case service firmware not flash properly that means one of partition is damaged and we must replace main board which was done by me on my P30 Pro. Don't loose hope last option if you are in warranty period then go to service center because Huawei devices are easily brick.:crying:
Thanks
goldybewon
goldybewon said:
Yes it is. From my point of view service firmware do the job. I have personally contacted service engineer of Huawei service center. If in case service firmware not flash properly that means one of partition is damaged and we must replace main board which was done by me on my P30 Pro. Don't loose hope last option if you are in warranty period then go to service center because Huawei devices are easily brick.:crying:
Thanks
goldybewon
Click to expand...
Click to collapse
I don't think that the motherboard would have to be changed immediately, it is necessary to try all the possibilities, try the flash via the already mentioned usb key
---------- Post added at 09:21 AM ---------- Previous post was at 09:21 AM ----------
[/COLOR]
medved6969 said:
I don't think that the motherboard would have to be changed immediately, it is necessary to try all the possibilities, try the flash via the already mentioned usb key
Click to expand...
Click to collapse
i took it to Huawei service center and they changed the motherboard (under warranty) in 6 hours and returned my P40 pro. .. this is the only solution if you have installed wrong OS via Hisuit proxy ..
KKYASIR said:
---------- Post added at 09:21 AM ---------- Previous post was at 09:21 AM ----------
[/COLOR]
i took it to Huawei service center and they changed the motherboard (under warranty) in 6 hours and returned my P40 pro. .. this is the only solution if you have installed wrong OS via Hisuit proxy ..
Click to expand...
Click to collapse
At least it turned out well that they fixed it as a guarantee
Since I bought the phone a week ago and upgraded to miui 12, the phone just reboots randomly, does anyone know how to fix?
toros04 said:
Since I bought the phone a week ago and upgraded to miui 12, the phone just reboots randomly, does anyone know how to fix?
Click to expand...
Click to collapse
Have you done a reset after the update, if not do it.
NOSS8 said:
Have you done a reset after the update, if not do it.
Click to expand...
Click to collapse
I haven't done any restore, is it recommended
toros04 said:
I haven't done any restore, is it recommended
Click to expand...
Click to collapse
It's up to you, if you want to retrieve your sms and calls or if you have a lot of apps (not all data is saved).You can use Micloud or google.
even after resetting, the device continues to reboot
toros04 said:
even after resetting, the device continues to reboot
Click to expand...
Click to collapse
Ok,What version is your phone and which ROM is currently installed?
NOSS8 said:
Ok,What version is your phone and which ROM is currently installed?
Click to expand...
Click to collapse
miui 12.0.3 global
toros04 said:
miui 12.0.3 global
Click to expand...
Click to collapse
12.0.3 is not the latest V12.0.4.0.QJKMIXM is the latest android 10. And now V12.2.1.0.RJKMIXM android 11
try to update.
Otherwise you can flash it directly with miflash but you have to unlock the bootloadeer.
the problem is that I can not install it, both because manually from the phone it says that it cannot verify the rom I downloaded via zip, and through my flash, because to unlock it the bootload requires 160 hours. Now I have another 6 days before I can return, so I don't know what to do
toros04 said:
the problem is that I can not install it, both because manually from the phone it says that it cannot verify the rom I downloaded via zip, and through my flash, because to unlock it the bootload requires 160 hours. Now I have another 6 days before I can return, so I don't know what to do
Click to expand...
Click to collapse
In this case, either wait the time to unlock or return the phone to the seller.
you can try:create a folder at the root,rename it to "downloaded_rom" and put the zip inside. try update.
download zip here https://xiaomifirmwareupdater.com/miui/lmi/stable/V12.0.4.0.QJKMIXM/
NOSS8 said:
In this case, either wait the time to unlock or return the phone to the seller.
you can try:create a folder at the root,rename it to "downloaded_rom" and put the zip inside. try update.
download zip here https://xiaomifirmwareupdater.com/miui/lmi/stable/V12.0.4.0.QJKMIXM/
Click to expand...
Click to collapse
it doesn't work anyway
toros04 said:
it doesn't work anyway
Click to expand...
Click to collapse
1)Unlock bootloader flash miflash
2)Return the phone to the seller.
NOSS8 said:
1)Unlock bootloader flash miflash
2)Return the phone to the seller.
Click to expand...
Click to collapse
I have a question, could it be that the reboots were due to the deactivation of miui optimizations? Because after activating them, there seems to be no more random reboots
toros04 said:
I have a question, could it be that the reboots were due to the deactivation of miui optimizations? Because after activating them, there seems to be no more random reboots
Click to expand...
Click to collapse
It is possible, but why write "upgraded to miui 12, the phone just reboots randomly" because this parameter does not turn off by itself.
NOSS8 said:
It is possible, but why write "upgraded to miui 12, the phone just reboots randomly" because this parameter does not turn off by itself.
Click to expand...
Click to collapse
I had turned it off before, and it didn't give any problems, after the update it started to give these problems, that's why, I thought it could be this
toros04 said:
I had turned it off before, and it didn't give any problems, after the update it started to give these problems, that's why, I thought it could be this
Click to expand...
Click to collapse
You could have specified it and when you deactivate this parameter an alert message indicates "possible unstable system" and what is your problem? unstable system.