Hello everyone,
I just flashed the Nougat update to my SM-G930F and I just flashed the AP File.
Do I need to flash and the CSC and the BL files ?
Thank you
Normally you should flash 4 files in the same odin session. Ignore the home_csc file.
Sent from my SM-G930F using Tapatalk
You should flash all 4 files in their corresponding places. Just leave HOME_CSC and just use CSC
Related
hello everyone
i.need some help. i have s6 edge sm g925L. after update lollipoo to marshmallow my fone baseband showing unknon.
i have flash with single tar file from sammobile.
also flash AP BL CP CSC and PIT file. but stilk.stuck.on same condition.
your help will be appreciated.
Sent from my HUAWEI MT1-T00 using Tapatalk
tzmobile said:
hello everyone
i.need some help. i have s6 edge sm g925L. after update lollipoo to marshmallow my fone baseband showing unknon.
i have flash with single tar file from sammobile.
also flash AP BL CP CSC and PIT file. but stilk.stuck.on same condition.
your help will be appreciated.
Click to expand...
Click to collapse
From your above-mentioned site, i think u only need to flash tar.md5 file under AP tab.
thanks for your reply
but i already mention here. i also download file from sammobile md5 tar single file.
i need modem file. may b after write modem file my problem can b solve.
Sent from my HUAWEI MT1-T00 using Tapatalk
Flash the phone with same region file this may help you
Hi guys
i got S7 930FD XSG,
Rooted using this Method [Recovery][Exynos] Official TWRP for Galaxy S7 (herolte)
Somehow mistakenly Turned off OEM
Device locked, Reinstalled Stock ROM using "Smart Switch"
Again rooted by above method.
Now OTA updates aren't available.
So I have two question, actually one confusion and one question.
As when i reinstalled ROM using Smart Switch, in Smart Switch it says "930F" instead of 930FD, while is device info it say 930FD.
1. are there same or single system/OS for both version ?
If yes, then can i install ROM of 930F XSG, with same AP and CSC of My device, i am attaching screenshot to share more info...
View attachment 4057525
View attachment 4057526
2. If answer to 1st question is yes and safe, then can i just Flash only AP file, leaving BL, CP, CSC etc ?
I just want to get latest update (either via Odin or OTA)
Regards
No help ??
Have a look in download mode what it says the device is, flash all 4 part of the ROM using ODIN 3.12.3
CSC will reset the phone
HOME_CSC will not
If you are upgrading or downgrading Android versions, use CSC to avoid problems
G930FD uses the exact firmware that G930F uses. So yes, they're the same.
Flash BL, AP, CP and CSC file (not HOME_CSC) if you want to return stock and have OTA updates. Remember this will format your phone. It's later up to you whether you want to root again or just remain on stock.
I want to downgrade my galaxy s7 to a previous security patch in nougat without lose my apps and data. I read that I have to use CSC_HOME file to flash without wipe the smartphone but I don't know if I have to flash the CSC_HOME file of my current rom or the file of the rom that I want to flash (sorry about my english xD)
If you have TWRP, make a full backup first.
The HOME_CSC is part of the zip file when you download the stock firmware, you can get it from sites like sammobile.com and updato.com. It comes with 5 files, AP, BL, CP, CSC and HOME_CSC
See: https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Beanvee7 said:
If you have TWRP, make a full backup first.
The HOME_CSC is part of the zip file when you download the stock firmware, you can get it from sites like sammobile.com and updato.com. It comes with 5 files, AP, BL, CP, CSC and HOME_CSC
See: https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Click to expand...
Click to collapse
I have the AT&T model, so, I can't install twrp. Do you know how can I install it? because in the official page, it's for the other models of s7
..
Can I flash only the CP file (from original Samsung S8 pie firmware) with Odin (without BL, CSC, AP)?
Just want to update the modem only without losing everything on the phone.
forcedv said:
Can I flash only the CP file (from original Samsung S8 pie firmware) with Odin (without BL, CSC, AP)?
Just want to update the modem only without losing everything on the phone.
Click to expand...
Click to collapse
Yes, what you are trying to do is frequently done by Samsung users. You can extract the modem from the firmware and convert it into an Odin flashable .tar.md5 then flash it via Odin in the AP slot.
Sent from my SM-S767VL using Tapatalk
So i downloaded Samsung firmware from Sammobile and i got these 4 files:
.BOOT_S7580XXUBOA1_REV00.tar.md5..CODE_S7580XXUBOA1_2814721_REV00_user_low_ship.tar.md5
.CSC_OLB_S7580OLBBNK1_2799949_REV00_user_low_ship.tar.md5
.MODEM_S7580XXUBOA1_REV00.tar.md5
Someone can explain where do each of these files belong to in Odin and I would be super grateful if someone could show me how to flash it by flashfire
you should have 5 files. 2 of them are nearly identical, CSC and HOME_CSC. Odin with files loaded
the only weird part is the CSC vs HOME_CSC. HOME_CSC will not factory reset your device, whereas CSC wipes everything
Youdoofus said:
you should have 5 files. 2 of them are nearly identical, CSC and HOME_CSC. Odin with files loaded
the only weird part is the CSC vs HOME_CSC. HOME_CSC will not factory reset your device, whereas CSC wipes everything
Click to expand...
Click to collapse
Oh thank you i already know that btw in the mean time i have try Boot one with BL and walla well Boot is BL. This is new comer who downloaded from Sammobile or Samsung Firmware Downloader:
-BL=BOOT
-AP=PDA=CODE
-CSC=CSC (two type as the mod mentioned)
-CP=MODEM
Case closed.