{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Huawei P9 Marshmallow Custom Rom
* NewWorld Version 7 *
for EVA L09-AL00-AL10-CL00-DL00-L19-L29-TL00 - but not P9 Plus and not P9 Lite
Continuation and further development of the popular Custom Rom of Senior Member @Blackball from the Thread: https://forum.xda-developers.com/p9/development/rom-huawei-p9-fromfuture-newworld-t3390820
NewWorld 7 Thread for German Users is here: http://www.android-hilfe.de/thema/huawei-p9-rom-6-0-newworld-7-by-tecalote.799824/
So far, I develope Custom Roms for Huawei P8: https://forum.xda-developers.com/huawei-p8/development/rom-huawei-p8-gratitude-tecalote-t3468118 and newest creation: https://forum.xda-developers.com/huawei-p8/development/rom-huawei-p8-arrow-custom-rom-based-t3561615/
I am happy to present you now a Custom Rom for Huawei P9! Have much fun with it
Note:
If you don't come from NewWorld 5 or 6.6 - you must be (or go back to) on the latest Official Marshmallow Stock Firmware for your Device - Fingerprint would not work whitout this step!
See Requirements and Instal Instructions...
Features:
- based on Firmware b198 with the KangV Framework (Kang Tools / K-Settings) - which allows you a maximum customation!
- pre rooted with SuperSU 2.79 in System-Mode
- BusyBox 1.26.2 YDS by YashdSaraf
- deodexed and debloaded
- Callrecorder in Dialer-app for manual recording
- Recording of Calls automatically
- NFC ported from latest Marshmallow-Build
- Google Apps are up-to-date (2017-01-19) - (Google Login, Gmail, Exchange, Playstore, Google App, Chrome
- Special Restart Menu: Normal reboot, Hot reboot, Recovery mode, Bootloader mode
- included in K-Settings: Xposed Framework 87.1 from Wanam (install it from there: K-Settings, More settings, Xposed Framework - install Xposed) Reboot about 10 min.
- Management of Xposed Framework and Modules with Material Installer in K-Settings
- Special Phone Manager (Permission Manager, Autostart Manager, Notification Manager, Spamfilter, Virus-scaner, Dropezone Manager...)
- Maximum battery life
- some Apps preinstalled: TitaniumBackup, BlackPlayer and MiXplorer (very good Root-Explorer)
- Dolby/Atmos™ with Viper4AndroidFX™ (Atmos on Homescreen - but Viper4Android in K-Settings, More settings)
- Dual-Window-Mode can be started from 583 Apps - but added in the second window to the started App in the first window can only 28 Apps - experimental feature...
- some nice Themes (Porsche Design from Mate 9, BlackPyramid Theme from blackbell....) by the way, Online-Themes are working, but you have to register a Huawei ID
- a lot of more
Themes:
Some Useres had problems to activate Themes after installing the Rom. This problem occurs normally not and it is not an issue of the Rom.
Thats why I recommend following:
Before flashing the new Rom make a Backup of your Themes.hwt(s) from the folder HWThemes on internal memory and store this in another folder on your external SD. After delete the HWThemes folder on internal memory (it will created automatically again)
If you make a Nandroid Backup before wiping previous system and flashing the new Rom, reboot your TWRP within the main menu of TWRP "Restart" ...restart TWRP. After you can make a wipe and flashing the Rom.
TWRP (everyone for Marshmallow p9, my linked same as the one from paulobrien) has sometimes problems with mount and unmount Partitions.
The result is (not copied) missing files, like Themes. Themes will be installed in NewWorld 7 not in /system/themes (there are just the icons - for saving place in system Rom) but in /data/hw_init/system/themes. If you have already such a problem with Themes, just flash the ThemesFIX.zip with TWRP (without making anything before and no Wipe of Dalvik and Cache after) - this solve the issue. As I said, it occurs just sometimes.
General Requirements:
1) Marshmallow-Bootloader - if you are on Lollipop or Nougat the Rom cannot be flashed!
2) Bootloader unlocked http://emui.huawei.com/en/plugin/hwdownload/download
3) TWRP P9 for Android 6: https://www.androidfilehost.com/?fid=457095661767122229
Note: TWRP has sometimes after an Nandroid Backup problems to unmount data or system. If you do Nandroid Backkup - please restart after TWRP from the main menu (Reboot Recovery) before wiping and flashing new Rom!
4) If you come from NewWorld 4.1 - or from nanoROM MallowPOP - be sure making the steps from the Installation instructions, otherwise Fingerprint-Scanner would not work!
Download Rom:
NewWorld 7: https://www.androidfilehost.com/?fid=529152257862696521
MD5: 749b1ec0ef072274221c7e77ea6bfc40
Themes-Fix: Only for Users which have problems after flashing the Rom with Themes: https://www.androidfilehost.com/?fid=817550096634742413
MD5: 749b1ec0ef072274221c7e77ea6bfc40
Installation instructions:
If you are currently on the latest official Huawei Marshmallow Stock-Firmware it is easy to install this Custom Rom. Your Stock System must not be rooted, because flashing this Custom Rom will Root it during installation.
1) First of all make Backups of your current system with Apps and data...
2) Activate Developer Options and in there USB-Debugging and OEM Unlock. In Advanced Settings activate "Unknown Sources"
3) Connect your Phone with USB to PC (drivers should be installed, how to do see below) and open Minimal ADB and Fastboot as Administrator.
4) With adb command boot your Phone into Fastboot Mode and unlock your Bootloader (everything explained below)
5) Unlocking your Bootloader makes automatic factory reset
6) Make a short setup (without Google Login or Fingerprint...) and activate Developer Options with USB-Debugging and OEM-Unlock again, also activate "Unknown Sources" in Advanced Settings.
7) Download the Rom an place it on your external SD.
8) Flash TWRP, disconnect P9 and PC from USB and boot with the Hardware-Key into TWRP (Vol+ and Power Button)
9) With TWRP make a Nandroid Backup of your Stock-Rom to your external SD (all shown partitions)
10) After go in TWRP to Wipe, but Advanced Wipe and wipe Dalvik, Cache, data and system (Fullwipe, no need to wipe SD Card)
11) Now you go to the main menu "Install" and navigate to the place (change directory), where the Rom.zip is located and swype to install. Wait until the Install-Script is finished, after reboot your Phone.
12) Restart needs between 5 and 10 minutes. Wipe of Dalvik and Cache after flashing the Rom is not necessary, because you have done it before.
If you came from NewWorld 4.1 you must go back to the last official Huawei Firmware for your model. Without these steps your Fingerprint-Scanner would not work! Please check by yourself the Download of the last Full Marshmallow-Firmware for your model. Only for EVA-L09 Cust 432 (official - not Leak) you can Download it here: http://www.carbontesla.com/2016/11/download-huawei-p9-b182-marshmallow-update-europe/
Steps:
1) Unzip the downloaded Firmware - create a folder on your external SD named dload and copy the UPDATE.APP in there.
2) Make a Backup of your Apps with data and everything you want to backup. Maybe also a Nandroid Backup with TWRP
3) Go to K-Settings, More Settings, Flash Recovery - flash official Recovery (grant Root Permissions)
4) Boot with the Restart Menu to the Stock Recovery. Wipe Cache with it. Restart the Phone with the 3 Buttons-Method (press in the middle of Vol+ and Vol- and press the Power Button until P9 restarts and begin with the EMUI Huawei Software Installing.
5) Bootloader will do closing during this operation.
6) Make a short Setup (without Google Login, Fingerprint or anything)
7) Go to Settings and activate Developer Options (7 times tap on build in "About the Phone"). In Developer Options activate USB Debugging and OEM Unlock.
8) In Advanced Settings activate "Unknown Sources"
9) With latest HiSuite: http://consumer.huawei.com/minisite/HiSuite_en/index.html install the Driver for your P9 - connect it with USB to your PC and close HiSuite.
10) Install Minimal ADB and Fastboot and open it as Administrator: https://forum.xda-developers.com/showthread.php?t=2317790
11) With: adb devices you will see if the connection is ready (Phone must be listed with Serialnumber - device)
12) With: adb reboot bootloader you start the Phone into Fastboot Mode
13) With: fastboot devices you check the connection (Phone must be listed with Serialnumber - fastboot)
14) With: fastboot oem unlock xxxxxxxxxxxxxxxx (instead of xxx.... you must write your Unlock-Code from Huawei and enter) your Bootloader will be opened
15) Phone makes automatically Factory Reset!
16) Go to settings, activate Developer Options and in there USB Debugging and OEM Unlock and in Advanced Settings "Unknown Sources"
17) Connect your P9 with USB to your PC
18) With Minimal ADB and Fastboot (opened as Administrator) restart the Phone to Fastboot Mode
19) flash TWRP (Rename the downloaded one to TWRP - its called then TWRP.img) fastboot flash recovery TWRP.img
20) Cut the USB connection between P9 and PC before restart to Recovery
21) With pressing Vol+ and Power Button restart your Phone until Huawei Logo appears, dont press Power then but keep holding Vol+ until TWRP is booting.
22) Setup language, screen timeout, time zone..... and allow Systemmodification
23) Go to Wipe - Advanced Wipe and wipe Dalvik, Cache, data and system
24) Restart Recovery with Restart Recovery in TWRP and flash the Rom! After flashing no wipe of Dalvik and Cache, because you have done it before.
If you came from Nano Rom: https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 - you must do following steps:
1) Download Blackballs NewWorld 4.1: https://www.androidfilehost.com/?fid=24591000424954817
2) Backup your Apps with data
3) With TWRP make Advanced Wipe of Dalvik, Cache, data and system - after flash NewWorld 4.1
4) Do all 24 Steps written above!
Push-Notifications
The Push-Notifications are working for sms, mms, email....
But for WhatsApp, Viber, Skype and other Chat/Net-Call Apps the push-notifications work only perfectly if you convert them into a system app.
After flashing the Rom and the Setup you install your Apps and may restore some Apps with data from a previous backup.
Example: WhatsApp. Install it from the Playstore. Dont open it. Install Link2SD from the Playstore. Link2SD give you a list of all Apps - for example "WhatsApp" - just press long on it and you get a menue - use: convert to system-app. Then reboot your Phone. This time open WhatsApp and you have to authentication WhatsApp again. WhatsApp is searching for a Backup and offer you to restore it. You do this and now Push-Notification will work (dont forget to make a Google-Drive Backup of the Chat-History in Settings of WhatsApp before flashing the Rom)
Additional information: https://forum.xda-developers.com/showpost.php?p=70726169&postcount=30
Switch of chinese Letters:
Go to K-Settings, in there to Notification Settings/Show statusbar lunar - disable it.
After go to Lockscreen und desktop settings/Lunar calender + Desktop wheather lunar - disable it.
HAVE MUCH FUN WITH THIS ROM
At this Point I wanna thank KangV for his great K-Settings Framework
If you like NewWorld- fell free to donate KangV: https://www.paypal.me/KangVIP
And if you like my Work too, feel free to donate to me: https://www.paypal.me/Tecalote
Many thanks and credits to other great Developers:
@guitarededhero (Viper/Atmos) https://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137
@wanam and @rovo89 and @DVDandroid for the Xposed Framework Development
@HootanParsa (MiXplorer) and @YashdSaraf (BusyBox arm64)
@topjohnwu (systemless Xposed Framework and Magisk)
@Chainfire - SuperSU
@dkionline - Custom Roms for P9
@Blackball - BlackPyramid Theme and Custom Roms for P8 and P9
Tutorial for return from NewWorld to Stock Marshmallow Firmware
If there is a reason to return from NewWorld to Marshmallow Original Stock Huawei Firmware - you can use this steps:
1) Backup what you need to backup! Use Huawei Backup and also Titanium Backup. NOTE: In the new Firmware or Rom dont restore system-apps or data from system-apps from previous system! Restore only USER-APPS. For Chat-Apps like WhatsApp, Viber, Skype use the built-in Backup function - but keep or backup the folder from those apps on internal memory (because you need them on the same place if you reinstall those apps)
Battery must have minimal 80% doing those steps....
If you have Xposed Framework installed - uninstall it (K-Settings /Xposed Settings /Install Xposed confirm - Reboot needs about 15min)
2) Open K-Settings /more settings /flash recovery - Flash official Recovery (grant Root-Permission) - this flashes Stock Recovery in half a second.
3) Download the Full Firmware (no OTA.zip) for your model, unzipp it on your PC (mostly you get update.app and meta.inf)
4) Create a folder on internal memory or external SD and name it: dload
5) Copy only update.app and meta.inf (if meta.inf is present) in this folder. After DISCONNECT USB from Phone!
6) Reboot to Stock Recovery - with Restart menu (also possible with pressing Vol+ and Power-Button at the same time as long until Recovery is displayed)
7) Wipe Cache with Stock Recovery (it uses another engine than TWRP) and do after a Factory Reset. There is no need to restart the phone to system now.
8) Press Vol- and Vol+ (in the middle) and Power-Button at the same time, until phone reboots and EMUI-Software-Installing is displayed
9) Let the EMUI-Installing finishing - it reboots automatically to system and starts the EMUI-Optimizing - wait until Language-Selection (new setup for you phone) is displayed.
Now you are back on Stock Firmware - Bootloader was automatically closed during Firmware-Installing
You can stay now on Marshmallow or update to Nougat if you like. But note: Once you are on Nougat - the Downgrade to Marshmallow is possible but not recommended (cause people reporting errors after Downgrade)
If you want to stay on Marshmallow and flash another Marshmallow based Custom Rom, continue from step 9 as follow:
9) In this case make just a short set up (You can skip the most) - but it is important to arrive the homescreen.
10) Go to Settings / About the phone and tap 7x (times) on Build-Number. It activates developer options.
11) Go to Developer options and activate USB DEBUGGING - and OEM-UNLOCK - after open Advanced settings /security and activate "Unknown Sources"
12) Connect Phone with USB to your PC (Accept the Fingerprint query with "always" on your Phone) Look, if Windows installed the right drivers so you have access to phone - if not install HiSuite http://consumer.huawei.com/minisite/HiSuite_en/index.html and make a connection with HiSuite. Allow installing HiSuite on Phone. If you have access now, close HiSuite (also in Background).
13) Copy the new Marshmallow based Rom to your Phone.
14) You need your Bootloader-Unlock-Code from Huawei!
15) With Minimal ADB and Fastboot unlock your Bootloader
16) Your phone will wiped with Factory Reset.
17) With Minimal ADB and Fastboot flash TWRP.
18) DISCONNECT USB Cable now from your Phone
19) Press Vol+ and Power-Button at the same Time until phone reboot (at the moment, Huawei Logo comes you can leave Power Button, but keep holding Vol+ until TWRP is displayed) - Reboot to TWRP takes a while
20) Set up TWRP (allow modification, set language, screen timeout, time zone...)
21) There is no need to wipe internal SD (but if you like to do this, do it at first and restart after TWRP - then you must setup TWRP again)
22) Go to Wipe, Advanced Wipe and wipe: Dalvik&Cache, Cache, data and system
23) Install the new Rom
24) Restore User-Apps, but dont restore any System-Apps (or data from it) Chat-Apps install from Playstore, and use the built-in restore function.
Huawei-Firmware-List:
Use only Marshmallow Full Firmware to retourn from NewWorld to Stock (mostly b182 or b181). Choose the right one for your model and cust! As far as I know all versions over 300 are based on Nougat (those you cannot use)
EVA-L09: http://hwmt.ru/oth/HWFF/info/view.php?find_model=eva-l09
For EVA-L09 - I would recommend following Firmware: http://www.carbontesla.com/2016/11/download-huawei-p9-b182-marshmallow-update-europe/
EVA-L19: http://hwmt.ru/oth/HWFF/info/view.php?find_model=eva-l19
EVA-L29: http://hwmt.ru/oth/HWFF/info/view.php?find_model=eva-l29
EVA-TL00: http://hwmt.ru/oth/HWFF/info/view.php?find_model=eva-tl00
EVA-ALxx: http://hwmt.ru/oth/HWFF/info/view.php?find_model=eva-AL (not sure, but maybe work on CL and DL variants)
Another Thread for Firmwares:
https://forum.xda-developers.com/p9/development/rom-stock-rom-eva-l19c636b168-t3419586
How do debrand Huawei Phone by SRK Tool Huawei:
https://forum.xda-developers.com/p9/how-to/vdo-guide-how-to-debrand-huawei-phone-t3410045
More debranding Stuff:
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
Awesome!! Thank you for bringing in your custom stock rom to XDA!
Z-Blade said:
Awesome!! Thank you for bringing in your custom stock rom to XDA!
Click to expand...
Click to collapse
Your welcome
On 6.6, automatic call recording wasn't working. Did you fixed it?
kye04 said:
On 6.6, automatic call recording wasn't working. Did you fixed it?
Click to expand...
Click to collapse
Hello Thanks for informing me. Nobody told me in the German Thread, that's why I didn't know.
I always use the manual call recording and have not tested the automatic one. I make a test today in the evening and tell you!
Is there anyway to install this on a EVA-L09C34 (Optus/Australia) model.
It was hard for me to go to the german forum and regisster, post etc..... I am glad you moved here...... U`ll have more support, u`ll see...
Also I am happy that someone still works on this rom. It is the best and most complete rom for P9 .
Zac_kha said:
Is there anyway to install this on a EVA-L09C34 (Optus/Australia) model.
Click to expand...
Click to collapse
This rom should work with all L09 variants, the C34 is pretty much the carrier model, so C34 means Optus and I think Vodaphone Australia also has a different carrier model. Ultimately, L09 all have the exactly same hardware.
Vielen Dank!
I downloaded this from android-hilfe.de last week (with the help of Google Translate!). An excellent rom and a worthy successor to @Blackball 's fine efforts. No obvious bugs or glitches that I can see, runs very smoothly.
Can't wait for your efforts with Nougat!
kye04 said:
On 6.6, automatic call recording wasn't working. Did you fixed it?
Click to expand...
Click to collapse
I have tested it on my phone right now and it works in NW 6.6 - and also NW7
You must open Dialer and there the menu symbol right below.
Open settings, in there enable record settings (see Screenshot)
If you call somebody or get calls it will automatically record the calls to external SD in the folder record
Test it again please. If it doesn't work for you, tell me.
colthekid said:
Vielen Dank!
I downloaded this from android-hilfe.de last week (with the help of Google Translate!). An excellent rom and a worthy successor to @Blackball 's fine efforts. No obvious bugs or glitches that I can see, runs very smoothly.
Can't wait for your efforts with Nougat!
Click to expand...
Click to collapse
Hello Thanks for the positive message!
I am working on the Nougat Version.
There are a few impairments at the moment:
TWRP for Nougat doesn't support data encryption yet...
The Google Security Level is very high.. Difficult to manipulate some processes..
Xposed Framework is not released yet for Nougat. Hopefully @rovo89 can get it work for Nougat...
KangVs Framework is working already on Nougat, K-Settings working - but modifications are only possible in system and boot, Root with SuperSU is possible - Manipulations on cust or vendor in the moment not.
The development is in progress
hi friends... how to make the huawei themes working on this rom?
i came from stock B182 where the themes were working fine..!
after flash this rom the themes doesnt apply..
Sorry for my bad english
Edit: i solved the themes issue by flashing throug 3 buttons only the cust from B182, now i have theme working again.. i made a zip flasheable of the rom with the cust if someone want it.. i will upload it to mega and put the link soon
cesarguaro said:
hi friends... how to make the huawei themes working on this rom?
i came from stock B182 where the themes were working fine..!
after flash this rom the themes doesnt apply..
Sorry for my bad english
Click to expand...
Click to collapse
Hi Themes should work. I flashed even from b182 and Themes are working.
Same issue had one Person of the German Thread.
Please check the MD5 on Filehost (I post it later in OP)
Make wipe of Dalvik and Cache, restart TWRP and flash the Rom again please.
Edit :
Before you should go to the folder HWThemes on internal Memory. There is a hidden folder .cache - delete everything in it. Backup in the HWThemes folder the .hwt files you want to store. Store it on another place on external SD. Delete every .hwt in HWThemes on internal Memory.
I don't know, why this issue sometimes occurs, cause normally it does not.
Please inform me.
cesarguaro said:
hi friends... how to make the huawei themes working on this rom?
i came from stock B182 where the themes were working fine..!
after flash this rom the themes doesnt apply..
Sorry for my bad english
Edit: i solved the themes issue by flashing throug 3 buttons only the cust from B182, now i have theme working again.. i made a zip flasheable of the rom with the cust if someone want it.. i will upload it to mega and put the link soon
Click to expand...
Click to collapse
I saw just right now, that you solved the problem. Which cust to you have? Normally the cust of the Rom is working for all...
Tecalote said:
I saw just right now, that you solved the problem. Which cust to you have? Normally the cust of the Rom is working for all...
Click to expand...
Click to collapse
i have the B182 with cust C432..!!!
cesarguaro said:
i have the B182 with cust C432..!!!
Click to expand...
Click to collapse
I have the same cust and was on b182, flashed the Rom and Themes working...
I don't think, its an issue of cust.
I believe it is a problem of TWRP.
If I make a Nandroid Backup and flashed after wiping immediately the Rom, TWRP has sometimes problems to unmount and remount partitions.
This produce then an error in the shown install script (system or data couldn't unmounted, they are busy - something like that...)
The Themes are in this Rom not located in /system/themes (there are just the icons to save place of system Rom)
The Themes are in /data/Hw_init/system/themes
If TWRP produce an error in mounting data after doing something before flashing the Rom, then Themes don't work cause the files were not copied as they should.
That's why I recommend to Reboot TWRP before flashing the Rom.
This was also the reason by a German User from Android Hilfe Thread.
He flashed the Rom again, and with the second flashing, Themes are working..
Edit: if you have flashed cust C432 it could be that the Phone Manager loose some parts like Permission Manager, Autostart Manager and so on?
I want to install sound mod on this rom (arise sound system) can i install this on this rom which has another sound mod? Will it work?
maliniaka said:
I want to install sound mod on this rom (arise sound system) can i install this on this rom which has another sound mod? Will it work?
Click to expand...
Click to collapse
Hello I cannot say. I must test it. Can you give me a link to this sound mode?
Tecalote said:
Hello I cannot say. I must test it. Can you give me a link to this sound mode?
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709 I'm trying now, I will say how it works!
EDIT1: It isn't working My p9 stuck on startup :/
Related
So by today (22.09.2014) is your phone oficialy renamed from "ZTE Red Bull V5" to "ZTE V5"
POSTING A PROBLEM
If you have some sort of problem with your device please please get us this info, so we could help you:
1-what rom/firmware are you using
2-what recovery
3-if you have rooted your device
4-what caused the problem
5-step by step description what you did before the problem shows up.
Hi i just made this thread to make a base for everyone who bought this (form me) superb phone.
So far we got root, custom recovery, and many chinese roms (based on Nubia UI, Color OS, LEWA OS, FROG OS...).
There are Mokee AOSP 4.4.4. rom in develpoment and CM11 in development, CM12 also.
2015.02.13 - Latest firmware is 1.17 (andorid 4.4.2, nubia UI2.5.1)!!!
Changelog(google translation from chineese):
-optimize the signal problem
-solving open U disk mode or restart the phone, ringtones revert to the default issue
into the video again, this video from one schedule to start playing the video
-update time management software, to solve the problem of the shutdown alarm clock does not ring
-media library interface, Pictures Pictures folder appear as a blank
-to use the gallery under OTG open unsupported file error
-switching to the media library interface, multiple exposure, suggesting that language View screenshot untranslated
-save the video recording status suspended again after recording, the Pause button to display the error
-optimization manually Focus
-video recording in the recording pause again, long display of detailed information is incorrect
-horizontal screen - portrait - horizontal screen operation, not full screen
-video player interface to open the USB mass storage press the return key error
here is link to my google drive. It contains stock roms from 0.50 to 1.12, GAPPS ect. Also contains tools to root and flash custom recovery.
MY GOOGLE DRIVE ZTE V9180 FOLDER
In my Google Drive there is also two custom recovery CWM and TWRP (thanx a lot to FAZERGOO from 4PDA.ru, here on XDA it is fazerg, so please thank him for his work)..the script in my root+recovery folder is updated, so you have option to flash CWM (6.0.5.1) or TWRP (2.8.0.0.)
here is list of commands you can dial in dialer and get some hidden menu and settings:
*#06# - displays IMEI
##36 - update server settings for OTA
*#*#4636#*#* - display phone information, battery information, battery history, usage statistics, WiFi information
*#406# - touch screen calibration
--proximity sensor calibration--
*#777# - no cover of proximity sensor
*#776# - cover proximity sensor with hand 2-5 cm above..so the bar is in the green
*# 405# - MHL test
to go to recovery you have to poweroff the phone and hold "vol+" and "power" for 2 sec
to go to safe mode....???
best resources for ROMS (chinese sites):
bbs.anzhi.com
www.tdbeta.cn
www.ztehn.com
And of course our friends from Russia thread:
www.4pda.ru
proDOOMmans mega drive where you can find all Mokee, CM11, PAC roms:
HERE! and dont forget to hit THANKS button for everyone who develop and help us to use this device!!!!
TIPS & TRICKS
-HOW TO CHANGE LCD DENSITY and switch to phablet UI!!! Beware, the camera app is little bit smaller then the screen, becaouse of the density, but still works well.
-HOW TO ADD ONE HAND FEATURE
-did you know that when holding home button on locked screen lights a flashlight?
-when you double tap home button on locked screen the time changes to media player controls?
-when you tap several times on any home screen your glas will broke?
-when you zoom out with two fingers on any home screen you will get into screen manager?
-in alarm clock app there is setting "power of alarm", when turned on, you can turn off your phone at night and the phone turns on by itself in the alarmclock time and wakes you up?
complete guide by navin_n
People always asking again and again on flashing ROMs, Recovery, GApps, Root etc. So, I have made detailed step by step guide for this. Hope now it will be clear to everyone for these processes:
BEFORE YOU DO ANYTHING FROM FOLLOWING, PLEASE MAKE ANANDROID BACKUP, BEST WITH TWRP!!!BECAUSE TWRP CAN MAKE BACKUP INCLUDING PRESIST AND MODEMST PARTITIONS!!![/CENTER]
GUIDE TO FLASH STOCK ROM:
NOTE:
1. Be sure to backup all important data (contacts, messages, call records, etc.) before proceeding
2. Ensure that Phone Battery is at least 40%.
3. Downloaded required STOCK ROM.
4. Phone with Stock Recovery.
STEPS:
1. Copy the downloaded zipped STOCK ROM to the root directory of External SD card or Internal SD card.
2. Power-off the phone.
3. Put the phone in the Recovery Mode and for this you need to press Vol+ and Power button at the same time for few secs and then release the Power Button.
4. In the Stock Recovery, perform wipe data/factory reset and wipe cache partition (In the menu, use +/- volume keys to scroll up/down & power button for confirmation).
5. Depending on which SD card you have copied the zipped STOCK ROM, choose "Apply update from /sdcard" or "Apply update from external /sdcard" accordingly.
6. Select the zipped STOCK ROM to flash.
7. Wait until you get the confirmation of successful flashing.
8. Reboot the phone by selecting "reboot system now".
9. DONE. (Initial boot may take some time so have patience.)
GUIDE TO INSTALL CUSTOM RECOVERY + CUSTOM ROM:
AS FOR CERTAIN REPORTS IT IS STRONGLY RECOMMENDED TO FLASH CWM RECOVERY IF YOU HAVE 1/8 VERSION
REQUIREMENTS:
1. Be sure to backup all important data (contacts, messages, call records, etc.) before proceeding.
2. Working Windows PC with ADB Drivers installed - without proper installation of drivers the process will not be successful.
3. Ensure that Phone Battery is at least 40%.
STEPS: (If you need only Custom Recovery, then follow the steps from 2 to 7, other steps you can skip)
1. Download the required zipped Custom ROM and copy it to the root directory of External SD card or Internal SD card.
2. Download the Recovery Tool zip file. (Link to download the Tool) . Make sure to download whole files. After that copy the zipped file to the root directory of C:\ or any place you prefer and then unzip the downloaded file.
3. Enable USB debuging mode. ("Menu Button" >> System settings(Settings) >> About phone(On the phone) >> Tap 6 times on Build number>>"Back button">> More >> Developer options >> Enable USB Debugging)
4. Connect the phone to the PC.
5. Go to the folder where you have unzipped the Recovery Tool file, and then execute the batch file "run.bat".
6. In PC, new window will open. Input your choice of Custom Recovery accordingly.
7. Follow the steps on-screen until all completes.
8. After completion, in the Fastboot menu, select "Boot recovery".
9. If the Custom Recovery was flashed succesfully, you will get CWM or TWRP recovery menu.
10. Perform wipe data/factory reset and wipe cache partition.
11. To flash the firmware: Select "Install ZIP" >> "choose zip from sdcard0 or sdcard1" depending on which SD card you have copied the ROM, external or internal >> Select Custom ROM >> Click Yes to flash selected ROM.
12. Wait until you get the confirmation of successful flashing.
13. Reboot the phone by selecting "reboot system now".
14. DONE. (Initial boot may take some time so have patience.)
GUIDE TO INSTALL GAPPs & ROOT:
REQUIREMENTS:
1. Backup all important data (contacts, messages, call records, etc.) before proceeding, if necessary.
2. Requires CUSTOM RECOVERY.(Mandatory)
STEPS:
1. Download appropriate flashable zipped GAPPS & ROOT files and copy it to the root directory of External SD card or Internal SD card.
2. Power-off the phone.
3. Put the phone in the CWM or TWRP Recovery Mode and for this you need to press Vol+ and Power button at the same time for few secs and then release the Power Button.
4. Flash the zipped files (one at a time): Select "Install ZIP" >> "choose zip from sdcard0 or sdcard1" depending on which SD card you have copied the file, external or internal >> Select Zipped File >> Click Yes to flash selected file.
(No need to do wipe data/factory reset and wipe cache partition)
5. After successful flashing, reboot the phone by selecting "reboot system now". If it ask to fix the permission when you reboot, select Yes.
7. Wait until you get the confirmation of successful flashing.
8. DONE. (Your phone will have GApps and Root Permission)
and don´t forget to hit thanx button to @navin_n, @fazerg and me maybe @DallasCZ
APPS taht can be remover (thanx navin_n)
If you have already Rooted your device then you can easily uninstall the system apps using "Root Uninstallers" available in Google Play.
However, for me , i prefer to use Root Explorer and delete the apps from system folder. The following apps are safe to delete but still i advise you to backup the files before deleting. If you use Root Explorer, make sure to change attribute of the system folder from Read Only (R/O) to Read Write (R/W) when deleting.
Be ware you make it on your own!! If there is also odex file, delete them too!!!
APPs that can be deleted:
folder --> /system/app
nubia_account.apk - only if you log in in nubia account (maybe you need this to use themes)
nubia_Calculator_v1.2.1.apk - calculator app (i dont like it so i installe another one and delete this)
nubia_Calendar_v1.0.apk - nubia calendar app
nubia_ClockWidget.apk - clock widget
nubia_Music.apk - nubia music player
nubia_myfile.apk - nubia file manager
nubia_NBSecurity.apk - nubia antivirus and system cleaner
nubia_NotePad_v1.1.5.apk - nubia notepad
nubia_zbiglauncher_v2.0.apk - nubia launcher for old people (everything is biiig)
NubiaPlatLogo_V1.0.0.apk - nubia lanim showing when you tap on NUBIA version in "about phone"
ZAppDataBackup.apk - nubia main app for backup your phone
ZDataBackup.apk - nubia backup app
ZQuickSearchBox.apk - nubia quick search box (if you install GAPPS it contains original google search box)
ZVideo.apk - very basic media player
If you dont use Live Wallpapers you cen delete the main app:
LiveWallpapersPicker.apk
and of course all livepaper apks
BasicDreams.apk
HoloSpiralWallpaper.apk
LiveWallpapers.apk
MagicSmokeWallpapers.apk
NoiseField.apk
PhaseBeam.apk
folder --> /system/preset_apps
TP_360AppStore_1.9.203.apk
TP_360Video_1.2.0_Nubia.apk
TP_BaiduInput_1000541a.apk
TP_baidumap_6.2.0.apk
TP_baiduvideo_5.3.0.apk
TP_gowhere_1044_131118_150501.apk
TP_iReader_2013122410.apk
TP_JdAndroid_2.6.0.apk
TP_QQ_4.2.apk
TP_QRCodeScaner_v1.0.apk
TP_tieba_5.5.2.apk
TP_Weibo_4.0.0_602.apk
TP_weixin_502.apk
Hi, I'm interested in buying this phone.. Could you tell me your first impressions?
It seems very good but I can't see any support for it, even if it has a Snapdragon 400..
Sent from my VOTO X2
DallasCZ said:
ROOT
the only way to root it so far is to run an Chinese exe, which will root your phone and install superuser (chinese one). Then you need to uninstall the superuser and install one from google play.
CWM
so far there is only chinese CWM 6.0.4.6..looking for someone who can make it english.
Click to expand...
Click to collapse
Hi, can you please provide me the exe file to root and explain me the process to root? I would be really grateful for your help! Thanks
I have WCDMA/GSM V5 3G 9180
ROOT CWM
Hello,
i made a simple bat file, which will root your phone, install custom recovery or original recovery.
here is the link: Dallas Google Drive.
you made everything on your own ..i am not responsible for any phone software/hardware damage.
jday17 said:
Hi, I'm interested in buying this phone.. Could you tell me your first impressions?
It seems very good but I can't see any support for it, even if it has a Snapdragon 400..
Sent from my VOTO X2
Click to expand...
Click to collapse
Hi,
there ar ea lot of Chinese phones, this phone is ment to be sell china only.
There are many forums but in Chinese.
I wrote a little review on gizchina.cz (is in Czech language,so use google translator)
TIP
For new users i recommend do this:
-boot your phone and see vhich version of formware you have (latest at this time is 0.50).
-If you have 0.44, then go to dialer and dial ##36. You get to the menu where you can select which server will be used for updates (at this time is 0.50 only for few people for feedback). then go to ybout phone and tap serach for updates and you get the update.
-after update is installed, go to about phone and tap 5times "build number" line , go back and go to "more" and "developer option" and turn on usb debugging.
-launch my root.bat, select root your phone and th ephone will reboot to bootloader and will be rooted.
-now you can install custom recovery (from my bat.file) it is bilangual CWM 6.0.4.9 recovery. Everything works fine as i used it.
-now after root and cwm recovery installed, make backup of your 0.50 rom and then you can proceed to delete bloatware (a lot of bloatware).
for rotted phones with CWM recovery:
if you want to make update from ZTE OTA, you have to load original recovery, the one in my package is not functional with update to 0.50 and above, so you have to flash from CWM recovery this package, then reboot and get the proper stock recovery, which will be functional with the update 0.44-0.50 and later.
DallasCZ said:
For new users i recommend do this:
-boot your phone and see vhich version of formware you have (latest at this time is 0.50).
-If you have 0.44, then go to dialer and dial ##36. You get to the menu where you can select which server will be used for updates (at this time is 0.50 only for few people for feedback). then go to ybout phone and tap serach for updates and you get the update.
-after update is installed, go to about phone and tap 5times "build number" line , go back and go to "more" and "developer option" and turn on usb debugging.
-launch my root.bat, select root your phone and th ephone will reboot to bootloader and will be rooted.
-now you can install custom recovery (from my bat.file) it is bilangual CWM 6.0.4.9 recovery. Everything works fine as i used it.
-now after root and cwm recovery installed, make backup of your 0.50 rom and then you can proceed to delete bloatware (a lot of bloatware).
for rotted phones with CWM recovery:
if you want to make update from ZTE OTA, you have to load original recovery, the one in my package is not functional with update to 0.50 and above, so you have to flash from CWM recovery , then reboot and get the proper stock recovery, which will be functional with the update 0.44-0.50 and later.
Click to expand...
Click to collapse
Thanks for the info! I'm currently updating to 0.5 and will let you know if I manage to root it too.
I`ve read the review and mine phone too has the squeaky back cover. It started squeaky after just few back panel removals. This is not a concern for me, but I wanted to ask you something else: How is you call quality? When I do calls the other side can hear me perfectly but the sound through my ear speaker is muffled and not very clear. Increasing the volume make it even worse. Do you experience such an issue?
-the back cover is really squeaky (i allready ordered another one)
-I am very happy vith the call quality. I had a nexus s whos volume vas up to 100%. Now i am about 60% and everything is loud and clear as i can hear
root and installing cwm is like a charm..i made it in the las 2 weeks (as i own the phone) about 10times
one Question: If you reboot the device do you also have the message "android is upgrading" every time no matter what you do or not do with the system?
DallasCZ said:
-the back cover is really squeaky (i allready ordered another one)
-I am very happy vith the call quality. I had a nexus s whos volume vas up to 100%. Now i am about 60% and everything is loud and clear as i can hear
root and installing cwm is like a charm..i made it in the las 2 weeks (as i own the phone) about 10times
one Question: If you reboot the device do you also have the message "android is upgrading" every time no matter what you do or not do with the system?
Click to expand...
Click to collapse
- I tried updating to 0.5 both through FOTA and with direclty downloaded update from the chinese official site to the sd card, but I always get some error (forgot what it was), will try tomorrow once again.
- My apps are upgrade after each reboot too. I was hoping that 0.5 will fix this issue, but It seems this is not the case.
- I'm on the hunt for a new back cover too, but I will wait for the official blue ones Share your thoughts on the one you purchased after a few days of usage
My only problem with the phone I experience is the bad incoming sound quality during calls. I will have try another sim card.
ps: boy this phone is a beauty
HuKuTo said:
- I tried updating to 0.5 both through FOTA and with direclty downloaded update from the chinese official site to the sd card, but I always get some error (forgot what it was), will try tomorrow once again.
- My apps are upgrade after each reboot too. I was hoping that 0.5 will fix this issue, but It seems this is not the case.
- I'm on the hunt for a new back cover too, but I will wait for the official blue ones Share your thoughts on the one you purchased after a few days of usage
My only problem with the phone I experience is the bad incoming sound quality during calls. I will have try another sim card.
ps: boy this phone is a beauty
Click to expand...
Click to collapse
Hi, can you please tell the name of chinese official site for our phone? thanks!
SITES IN cHINESE LANGUAGE
Hello,
so there are many sites. To see attachments you have to register to the sites, which is a little bit tricky due to instatnt need of translation in the registration process, but it can be done.
official with a lot of new information also from ZTE service:ztehn.com
the best for custom ROM and Recovery (development):anzhi.com
to see anzhi.com you need to add two adress in your windows hosts file see here
also some good information can be found here on myzte.cn
another tip
-If you get the "android is upgrading" on every boot, then you have to uninstall titanium backup, reboot, wait 3 minutes and let the system settle down, then install titanium again, reboot, and its done.
-if you want to restore WIFI access point and passwords form Titanium Backup, use backup from tar file, not from XML!!!
Waiting on a custom rom
Hello everyone,
I used the method I found at needrom.
It did the trick; the device was rooted, gapps installed, an multilangual.
But I didn't manage to install the latest update (50). I thought it was because the device was rooted, so I removed root, whitout succes, I am still not able to install the update.
Also I think the contact manager is buggy; newly added contacts dissapear after rebooting the device, it doesn't matter if I sync the device. I have to import my contacts from my SD card every time this happens.
So, I hope there comes a good custom rom for this device with this excellent hardware! I have Miui unofficiall on my Xiaomi Mi2s, it works like a charm. I hope soon this device appears on the list one of these days
update
-if you installed the ROm from needrom, i think you cannot upgrade to 0.50.
-on www.ztehn.com you can download the full 0.50 rom (only english and chinese language) this rom you can flash.
-contacts: If you are in contacts, press "more" and "advanced" and check the "default storage" it must be set to your google account. Then go back and check "display settings" and check which accounts are to show in contact list.
I had same problem and the problem was, that all new contact automaticly save to local storage and i have the local storage unchecked to display..so i havent seen my newly added contacts!!!
I have same issue
I have same isse. I dont hear anyone. But everyone hear me. i think that built in speaker doesnt work.
ZTE v5 DualSIM v1.06 beta released (4.4.2 + Nubia UI 2.0, package contains new recovery, H106 update package and G050 restore package)
http://pan.baidu.com/share/link?shareid=2878143782&uk=2436317143 Pass: [COLOR=#0640]j7cb
MD5:[/COLOR][COLOR=#0640]3C318AE402AC5424444F5862B540AF2D
[COLOR=#0640]Uploaded to my MEGA acc: link (1.06 unzipped too)
[COLOR=#0640]BETA release [COLOR=#0640]but seems stable (according to chinese forum feedbacks) I will try thi[COLOR=#0640]s next week, when i receive my v9180 2/8G. [/COLOR][/COLOR][/COLOR]
[/COLOR][/COLOR]
I sucessfully installed 1.06 and its looking good so far. The problem Im facing is the "No connection to google servers" error when I try to add my google account. There is no playstore and I tried to manually install it trhough .apk but again no luck. Have you guys managed to run the playstore with this new firmware?
install my gapps package trough cwm recovery.
CM443 ROM: First Tweaked SPFT version 1.1 by CMahendra
for iBerry Auxus Note 5.5
[Rooted][Deodexed][ZipAligned][Optimized][TWRP 2.7.1.0]
This also UNBRICKS, totally bricked phone. Guys. We now have our own first Stock Rom on 4.4.3. This is also Bhaarat's first SPFT version of AUXUS NOTE 5.5 STOCK ROM. RomDump and built completely by me.
UNBRICKING WILL BE SMOOTHER AND PERFECT WITH ROOTED ROM.
** WITH TWRP 2.7.1.0 RECOVERY
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features in v1.0:
1) Fully Rooted
2) Deodexed Every App and Framework files
3) ZipAligned & Optimized
4) Installs TWRP 2.7.1.0 Recovery (If you dont want to change recovery, UNSELECT recovery while flashing.
5) Boot Image Modified for improvements
6) Boatwares removed, only stock essentials
7) All latest GAPPS (Maps , Gmail , Playstore, Play Services, etc)
8) Google Now Launcher
9) Loud Sound
10) Ported Improved and Better Stock Camera with frameworks (No Grains in camera)
11) NFC Tools integrated
12) All apps tested ok and perfect.
13) Perfected Boot Animation and Boot Logo.
14) Buttery Smooth
15) Less Battery Drain than 4.4.2
16) Many tiny things I dont remember now
Whats new in v1.1
--- Full Tweaking init.d Support enabled and added 4.4.3 compatible tweaks
--- Network Tweaks for faster server response
--- Deep Sleep Tweak Enabled
--- Battery Backup will improve noticeably. ZERO DRAIN when screen off.
--- Ram Optimization after every reboot
--- Sqlite3 Optimization after every reboot
--- Auto Cache Management
--- Fixed FC in FactoryTest Mode (Hidden menu Calibration)
--- Wifi performance improved
--- Faster UI rendering via GPU
--- Improved photo and video recording quality
Whats wrong/missing?
--- Off-screen gestures is intentionally removed for better battery backup, because it is main culprit in faster-drain of battery. It will not be added in my ROM now or in future. But you can try any Free App available on Google Play Store for the same. Kindly do not send request for adding it. I don't want freaking panic reports for battery drains.
Important: Screen Gestures are still working perfectly. For GOD's sake read and understand that Offscreen gestures and Screen Gestures are different things. Those who will again ask it will be recognized as nothing but n00bs.
Installation Instructions:
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. I am not responsible for any damages.
1) Optional if already installed before: Download and install ADB USB Driver Provided by iBerry (Recommended). You can also use Universal Android USB Drivers if you have any. Restart PC after installing.
2) Optional if already installed before: Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Rebooting PC/Laptop Recommended at this point. DO NOT CONNECT YOUR PHONE NOW.
3) Download and extract Main FIRMWARE Package (Link in Second Post) on desktop or anywhere on your pc/laptop.
4) Also Download and extract SPFT Flashing Tool on your pc/laptop (Download Link)
5) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
6) Keep all options checked (selected) as shown in following image. If options are not checked (selected) then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted "Firmware443" sub-folder . All files options will be selected but if anything is not selected then select accordingly as mentioned in following image.
Now PRESS "Download" button at top
7) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
8) Now close program on pc and remove cable and reboot phone.
9) Important: When phone starts you should do Factory Reset by going Settings >> Backup & Reset >> Factory Data Reset.
This step will reboot your phone once more.
10) ABOVE IS MAIN ROM. Flash Recovery Flashable Zip of Update Version 1.1. Just flash from Recovery and reboot. No wipe required.
Done. Enjoy Press thanks if you liked my work.
(UPDATE) Version 1.1 Update (*Flash this from TWRP Recovery Mode over Full Rom 1.0)
Download Link: http://d-h.st/ATiE (2 MB small update)
**Just flash from recovery without wiping anything and reboot.
**TAKE FULL ROM BACKUP IN RECOVERY BEFORE FLASHING. Just a normal precaution
How to flash?
--- Copy file in SDCARD
--- Switch off phone and start in TWRP recovery mode. (Keep Pressing VolumeUP and Power Button, until TWRP starts)
--- Install this update Zip by selecting "Install" option
--- Just reboot to system (Do not wipe anything or do not make factory reset)
ChangeLog:
--- Full Tweaking init.d Support enabled and added 4.4.3 compatible tweaks
--- Network Tweaks for faster server response
--- Deep Sleep Tweak Enabled
--- Battery Backup will improve noticeably. ZERO DRAIN when screen off.
--- Ram Optimization after every reboot
--- Sqlite3 Optimization after every reboot
--- Auto Cache Management
--- Fixed FC in FactoryTest Mode (Hidden menu Calibration)
--- Wifi performance improved
--- Faster UI rendering via GPU
--- Improved photo and video recording quality
================================================
(FULL ROM) Main SPFT Version 1.0 Package Download
Server 1) Dev-Host (FILE SPLIT IN TWO PARTS. DOWNLOD BOTH LINKS & Click on ZIP file to extract)
**TAKE FULL ROM BACKUP IN RECOVERY BEFORE FLASHING. Just a normal precaution
------------Split Zip Part 1 : http://d-h.st/n8Q (172MB)
------------Split Zip Part 2 : http://d-h.st/Znt (400MB)
*Plesae do not mirror links without permission. It helps us to keep/monitor download counts.
================================================
Patches and Addon (Files and Flashables)
1) BASEBAND Update For Auxus Note by CMahendra (For all Android versions)
http://d-h.st/uWV
---- For strong Mobile network and fast Network Search (APN)
2) Sensor Calibration Test Patch for 4.4.3 Rom
http://forum.xda-developers.com/attachment.php?attachmentid=2952230
---- For solution on FC Error when you click Loudspeaker test in hidden menu *#*#33#*#*
Frequently Asked Questions
Question 1) My phone is not rooted. Can I go with this 4.4.3?
Answer: Yes of course. This can be directly flashed on Unrooted phones with SPFT method. So with this flash you automatically get TWRP 2.7.1.0 Recovery and Fully Rooted ROM! SPFT Unbricks Phone. UNBRICK MEANS, when phone is dead or everything is messed or bootloops or partition table damaged or blank screen or corrupted rom, etc. etc. Just flash with this method and you are back on FRESH 4.4.3 ROM. Flashing Rom from recovery may always get issues if method is wrong or tables not compatible or any wierd issues but Flashing with SPFT means resetting of partition tables and flashing all content in every partition like A COMPANY gives you.
Question 2) My PC/Laptop is not detecting my Phone while flashing. What to do?
Answer: Above drivers worked for me flawlessly. Phone was detected in first try but there are members who reported that they did it 2/3 times and then phone was detected. Well it is weird but you can try installing driver and rebooting pc and repeat it 2/3 times. When it installs the flashing tool will show COM3 serial port connected message at bottom right corner as shown in this image.
If everything fails, try this new USB2Serial Driver which I have recently found from iBerry's official rom package and it should help. DOWNLOAD USB2Serial Driver
Question 3) SPFT Flashing fails with message "PMT changed for the rom it must be downloaded" What to do?
Answer: That error means that the partition table present in the phone is different from the partition table that the rom ur trying to flash to the phone needs. There is drop down with few flashing modes. "Download only" mode doesn't reformat the phone's partitions to what the new rom needs, so you have to choose the "Firmware Upgrade" mode option, that will apply the new formatting table following the settings of the rom you are trying to flash.
Downloading sir. Thank you.
A small clarification please sir.
What is the baseband version in this rom. Is it P6 or P5.
Cause tried mlais ROM from need rom which has baseband of P5.
Great!..
Thanks for 4.4.3 hoping for 4.4.4 and also SAMSUNG GALAXY ROM'S
HOPW YOU DO IT FOR US!
Great work
4.4.3 with SPFT!! That's really FANTASTIC, ha ha ha, now we don't need of separate rooting, custom recovery methods, that's really great work boss, thanks a lot for the ROM. :good::good::good:
baskye said:
Downloading sir. Thank you.
A small clarification please sir.
What is the baseband version in this rom. Is it P6 or P5.
Cause tried mlais ROM from need rom which has baseband of P5.
Click to expand...
Click to collapse
This SPFT version flashes P5 but there is P6 Baseband updates given in Second post. Flash it from Recovery mode..
kiranhdg said:
Thanks for 4.4.3 hoping for 4.4.4 and also SAMSUNG GALAXY ROM'S
HOPW YOU DO IT FOR US!
Click to expand...
Click to collapse
Working on 4.4.4 now. It will come for sure before iBerry even can think of :laugh:
Android update was major task for me. I can not even think of custom roms when the features are not working fine in stock rom. So first mission is perfect camera , battery etc. Just check camera is improved like hell in 4.4.3. Sure some custom roms will follow....
[email protected] said:
4.4.3 with SPFT!! That's really FANTASTIC, ha ha ha, now we don't need of separate rooting, custom recovery methods, that's really great work boss, thanks a lot for the ROM. :good::good::good:
Click to expand...
Click to collapse
Thanks pals
Any body installed this Rom...What's the battery backup?
Great job Mahendra! Thank u Thank u Thank u!!!!!!
Great job Mahendra! Thank u Thank u Thank u!!!!!! The RED patch in camera is completely removed
Not only the camera, Battery , the speaker volume improved. Its Rooted. Has ES explorer preinstalled.
Proximity sensor doesn't seem to work. Please check. I dont have any issue with that as I'm using the phone with flip cover and hence no chance of my ear touching the screen. Have you purposely done away with that to improve battery?
cmahendra said:
[UNBRICK 4.4.3] First ever SPFT version of KITKAT 4.4.3
for iBerry Auxus Note 5.5
[Rooted][Deodexed][ZipAligned][Optimized][TWRP 2.7.1.0]
This also UNBRICKS, totally bricked phone. Guys. We now have our own first Stock Rom on 4.4.3. This is also Bhaarat's first SPFT version of AUXUS NOTE 5.5 STOCK ROM. RomDump and built completely by me.
UNBRICKING WILL BE SMOOTHER AND PERFECT WITH ROOTED ROM.
** WITH TWRP 2.7.1.0 RECOVERY
Features:
1) Fully Rooted
2) Deodexed Every App and Framework files
3) ZipAligned & Optimized
4) Installs TWRP 2.7.1.0 Recovery (If you dont want to change recovery, UNSELECT recovery while flashing.
5) Boot Image Modified for improvements
6) Boatwares removed, only stock essentials
7) All latest GAPPS (Maps , Gmail , Playstore, Play Services, etc)
8) Google Now Launcher
9) Loud Sound
10) Ported Improved and Better Stock Camera with frameworks (No Grains in camera)
11) NFC Tools integrated
12) All apps tested ok and perfect.
13) Perfected Boot Animation and Boot Logo.
14) Buttery Smooth
15) Less Battery Drain than 4.4.2
16) Many tiny things I dont remember now
Installation Instructions:
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. I am not responsible for any damages.
1) Optional if already installed before: Download and install ADB USB Driver Provided by iBerry (Recommended). You can also use Universal Android USB Drivers if you have any.
2) Optional if already installed before: Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Reboot Recommended at this point. DO NOT CONNECT YOUR PHONE NOW.
3) Download and extract Main FIRMWARE Package (Link in Second Post) on desktop or anywhere on your pc/laptop.
4) Also Download and extract SPFT Flashing Tool on your pc/laptop (Download Link)
5) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
6) Keep all options checked (selected) as shown in following image. If options are not checked (selected) then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted "Firmware443" sub-folder . All files options will be selected but if anything is not selected then select accordingly as mentioned in following image.
Now PRESS "Download" button at top
7) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
8) Now close program on pc and remove cable and reboot phone.
9) Important: When phone starts you should do Factory Reset by going Settings >> Backup & Reset >> Factory Data Reset.
This step will reboot your phone once more.
Done. Enjoy Press thanks if you liked my work.
Click to expand...
Click to collapse
Can you please provide Xperia Z keyboard for this version.
cmahendra said:
[UNBRICK 4.4.3] First ever SPFT version of KITKAT 4.4.3
for iBerry Auxus Note 5.5
[Rooted][Deodexed][ZipAligned][Optimized][TWRP 2.7.1.0]
This also UNBRICKS, totally bricked phone. Guys. We now have our own first Stock Rom on 4.4.3. This is also Bhaarat's first SPFT version of AUXUS NOTE 5.5 STOCK ROM. RomDump and built completely by me.
UNBRICKING WILL BE SMOOTHER AND PERFECT WITH ROOTED ROM.
** WITH TWRP 2.7.1.0 RECOVERY
Features:
1) Fully Rooted
2) Deodexed Every App and Framework files
3) ZipAligned & Optimized
4) Installs TWRP 2.7.1.0 Recovery (If you dont want to change recovery, UNSELECT recovery while flashing.
5) Boot Image Modified for improvements
6) Boatwares removed, only stock essentials
7) All latest GAPPS (Maps , Gmail , Playstore, Play Services, etc)
8) Google Now Launcher
9) Loud Sound
10) Ported Improved and Better Stock Camera with frameworks (No Grains in camera)
11) NFC Tools integrated
12) All apps tested ok and perfect.
13) Perfected Boot Animation and Boot Logo.
14) Buttery Smooth
15) Less Battery Drain than 4.4.2
16) Many tiny things I dont remember now
Installation Instructions:
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. I am not responsible for any damages.
1) Optional if already installed before: Download and install ADB USB Driver Provided by iBerry (Recommended). You can also use Universal Android USB Drivers if you have any.
2) Optional if already installed before: Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Rebooting PC/Laptop Recommended at this point. DO NOT CONNECT YOUR PHONE NOW.
3) Download and extract Main FIRMWARE Package (Link in Second Post) on desktop or anywhere on your pc/laptop.
4) Also Download and extract SPFT Flashing Tool on your pc/laptop (Download Link)
5) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
6) Keep all options checked (selected) as shown in following image. If options are not checked (selected) then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted "Firmware443" sub-folder . All files options will be selected but if anything is not selected then select accordingly as mentioned in following image.
Now PRESS "Download" button at top
7) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
8) Now close program on pc and remove cable and reboot phone.
9) Important: When phone starts you should do Factory Reset by going Settings >> Backup & Reset >> Factory Data Reset.
This step will reboot your phone once more.
Done. Enjoy Press thanks if you liked my work.
Click to expand...
Click to collapse
Impressive !
question about attached zip files
cmahendra said:
Main SPFT Package Download Links
Server 1) Dev-Host (FILE SPLIT IN TWO PARTS. DOWNLOD BOTH LINKS)
------------Split Zip Part 1 : http://d-h.st/n8Q
------------Split Zip Part 2 : http://d-h.st/Znt
Patches and Addon (Files and Flashables)
1) BASEBAND Update For Auxus Note by CMahendra (For all Android versions)
http://d-h.st/uWV
---- For strong Mobile network and fast Network Search (APN)
Click to expand...
Click to collapse
Just for my information, i need to open only the main zip file and extract it, or i need to do anything else ?
jcpprince said:
Great job Mahendra! Thank u Thank u Thank u!!!!!! The RED patch in camera is completely removed
Not only the camera, Battery , the speaker volume improved. Its Rooted. Has ES explorer preinstalled.
Proximity sensor doesn't seem to work. Please check. I dont have any issue with that as I'm using the phone with flip cover and hence no chance of my ear touching the screen. Have you purposely done away with that to improve battery?
Click to expand...
Click to collapse
No! Proximity Sensor need to be recalibrated from secret manu *#*#33#*#*
Nothing done for battery. Will work on proximity to make it like stock by checking codes. Please wait.
Thanks for flashing this rom and glad you liked the camera and battery results.
IMP: Please edit your post and remove whole quote of opening post.
baskye said:
Can you please provide Xperia Z keyboard for this version.
Click to expand...
Click to collapse
This was based on 4.4.3 stock so I did not mixed Xperia Z keyboard. Wait for next updates. I will try to replace keyboard but after some time. Hope you will wait with patience because I get involved in many models at the same time. You may remind me if I forget. Thanks
ashishgupta1973 said:
Impressive !
Click to expand...
Click to collapse
Thanks a lot. Glad you liked it.
ashishgupta1973 said:
Just for my information, i need to open only the main zip file and extract it, or i need to do anything else ?
Click to expand...
Click to collapse
IMP: Please edit your post and remove whole quote of opening post.
Download both files and keep together in a folder and if you have WinZip / WinRAR / WinJAR, then just doublelick on ZIP file and extract as usual.
(UPDATE) Version 1.1 Update
Download Link: http://d-h.st/ATiE
**Just flash from recovery without wiping anything and reboot.
**TAKE FULL ROM BACKUP IN RECOVERY BEFORE FLASHING. Just a normal precaution
ChangeLog:
--- Full Tweaking init.d Support enabled and added 4.4.3 compatible tweaks
--- Network Tweaks for faster server response
--- Deep Sleep Tweak Enabled
--- Battery Backup will improve noticeably.
--- Ram Optimization after every reboot
--- Sqlite3 Optimization after every reboot
--- Auto Cache Management
--- Fixed FC in FactoryTest Mode (Hidden menu Calibration)
--- Wifi performance improved
--- Faster UI rendering via GPU
--- Improved photo and video recording quality
Sir,
Is the patches of "Base Band" and "Sensor Calibration" are optional or compulsory.
Thanks you very much for the Great ROM.
:good::good::good:
ThankU Mahendra Sir… Today I install 4.4.3. It's super.
I want some more options could you please consider my options
1.Call connect vibrating is ther in your Rom but call end vibrating not there. Please add that option
2.battery backup is k..but please optimizing better battery backup.. In using of 2g/3g net battery drain 1m/1% discharging.. I faced this problem in 4.4.2. In your rom also same.. In sleeping time(screen off) battery not discharging its awesome.
3.gps is not working in travel time not connected in gps satellite.. In my net connection is h+ but not connected in speed meter..
Could you please consider my problem thanks for this great Rom
Need help on 2 things
Dear Mahendra,
I have posted requests for help a couple of times. Request you to please help me on beneath two items -
- Post flashing the 4.4.3 rom, am unable to find the option of offscreen gestures.
- I am unable to find the option to save fingerprints. After scanning the fingerprint, there is a box on screen that turns green, but there is no option to add or save the print.
- Also, as I just realized today, Bluetooth does not switch on. is there a bug in the rom?
unable to extract zip files
hi, first of all thanks for making ROM for this phone, well after downloading files i was unable to extract them, i dont know whether i bcame dumb :silly: or problem with zip file. i downloaded files 4 times & still i was unable to extract them ! plz correct me where i was :silly:
Thanks
try deleting the space before the extension (.z01) and try extracting from the other zip file
marpudi said:
hi, first of all thanks for making ROM for this phone, well after downloading files i was unable to extract them, i dont know whether i bcame dumb :silly: or problem with zip file. i downloaded files 4 times & still i was unable to extract them ! plz correct me where i was :silly:
Thanks
Click to expand...
Click to collapse
Excellent
cmahendra said:
First ever SPFT version 1.1 of KITKAT 4.4.3
for iBerry Auxus Note 5.5
[Rooted][Deodexed][ZipAligned][Optimized][TWRP 2.7.1.0]
This also UNBRICKS, totally bricked phone. Guys. We now have our own first Stock Rom on 4.4.3. This is also Bhaarat's first SPFT version of AUXUS NOTE 5.5 STOCK ROM. RomDump and built completely by me.
UNBRICKING WILL BE SMOOTHER AND PERFECT WITH ROOTED ROM.
** WITH TWRP 2.7.1.0 RECOVERY
Features in v1.0:
1) Fully Rooted
2) Deodexed Every App and Framework files
3) ZipAligned & Optimized
4) Installs TWRP 2.7.1.0 Recovery (If you dont want to change recovery, UNSELECT recovery while flashing.
5) Boot Image Modified for improvements
6) Boatwares removed, only stock essentials
7) All latest GAPPS (Maps , Gmail , Playstore, Play Services, etc)
8) Google Now Launcher
9) Loud Sound
10) Ported Improved and Better Stock Camera with frameworks (No Grains in camera)
11) NFC Tools integrated
12) All apps tested ok and perfect.
13) Perfected Boot Animation and Boot Logo.
14) Buttery Smooth
15) Less Battery Drain than 4.4.2
16) Many tiny things I dont remember now
Whats new in v1.1
--- Full Tweaking init.d Support enabled and added 4.4.3 compatible tweaks
--- Network Tweaks for faster server response
--- Deep Sleep Tweak Enabled
--- Battery Backup will improve noticeably. ZERO DRAIN when screen off.
--- Ram Optimization after every reboot
--- Sqlite3 Optimization after every reboot
--- Auto Cache Management
--- Fixed FC in FactoryTest Mode (Hidden menu Calibration)
--- Wifi performance improved
--- Faster UI rendering via GPU
--- Improved photo and video recording quality
Installation Instructions:
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. I am not responsible for any damages.
1) Optional if already installed before: Download and install ADB USB Driver Provided by iBerry (Recommended). You can also use Universal Android USB Drivers if you have any. Restart PC after installing.
2) Optional if already installed before: Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Rebooting PC/Laptop Recommended at this point. DO NOT CONNECT YOUR PHONE NOW.
3) Download and extract Main FIRMWARE Package (Link in Second Post) on desktop or anywhere on your pc/laptop.
4) Also Download and extract SPFT Flashing Tool on your pc/laptop (Download Link)
5) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
6) Keep all options checked (selected) as shown in following image. If options are not checked (selected) then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted "Firmware443" sub-folder . All files options will be selected but if anything is not selected then select accordingly as mentioned in following image.
Now PRESS "Download" button at top
7) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
8) Now close program on pc and remove cable and reboot phone.
9) Important: When phone starts you should do Factory Reset by going Settings >> Backup & Reset >> Factory Data Reset.
This step will reboot your phone once more.
10) ABOVE IS MAIN ROM. Flash Recovery Flashable Zip of Update Version 1.1. Just flash from Recovery and reboot. No wipe required.
Done. Enjoy Press thanks if you liked my work.
Click to expand...
Click to collapse
Hello,
Excellent work, but why you changed resolution !!
Please work on it.
Will post you about battery lifetime once used for 2-3 days
HOMTOM HT6 - 6250 Mah Battery - MT6735P 1,0 Ghz - 2 GB RAM - LTE - HotKnot -5,5" HD - Fastcharging
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STOCK Firmware:
http://www.needrom.com/download/homtom-t6/
Latest ROM is R17 - 20160513. You can update through OTA too.
Download: R17: https://yadi.sk/d/4AOdC_9hv3ttR
Do not OTA update if you have ROOT. - You will be in BOOTLOOP
It seems we can use ROM from DOOGEE T6 on HOMTOM HT6 too - BUT PRELOADER MUST BE UNCHECKED IN SPFlashTool
Link here: R05https://yadi.sk/d/fI3Q3DFTmphbW
R06 https://yadi.sk/d/jEYTpiNpndYT4
Custom Recovery:
TWRP 2.8.7.0 https://mega.nz/#!mhpmnIBR!3lqqnuBxC3WkF-b7_kjsIV_VkONopYhtl4hbGfmawBE
TWRP 3.0 https://mega.nz/#!Ho5DCR5D!mMachkzvD5YrJcnH5c0mHgM5mlji09emsU8wy_ZbxFM
TWRP 3.0.2 https://mega.nz/#!P8JS0JjA!2xvaHwOKMNCvwaA-HC4a6hLEDt-vXUsimwjCNTLnA9o
CWM https://mega.nz/#!75B2HaLL!5SREt62m0O5EqI2-Qpx2X9_rWpMEebSZ_aeamvUTvB4
Thanks jemmini , Hanuma50 and kalipso888- 4PDA.ru
BEFORE FLASHING TWRP RECOVERY. MAKE SURE, YOU HAVE ENABLED "UNLOCK OEM" - UNLOCK BOOTLOADER - IN DEVELOPER OPTIONS.
Drivers:
I am using this drivers without problem
Please download all these drivers:
Handset WinDriver v1.00.00.31 (Drivers for ADB, MTP, USB Mass Storages, etc)
DriverAutoInstaller v1.1236.00 (Drivers for MediaTek USB VCOM)
MediaTek USB VCOM Driver v1.1123.00 (MTK VCOM driver for Win 8.1 x64)
If you have Win8/8.1/10 - you must install DriverAutoInstaller_v1.1236.00 manually. Go to:
xxxx\DriverAutoInstaller_v1.1236.00\SmartPhoneDriver\x64 or X86\Infs and select usbvcom.inf and usbvcom_brom.inf > right click and select install. Some messages will appear > close it with click on OK button.
Now you must go same way with Unsigned infs folder. Go to : xxx:\DriverAutoInstaller_v1.1236.00\SmartPhoneDriver\x64\Unsigned infs and select all .inf files > right click and select install. Some messages - unsigned driver will appear, just ignore it and close it with ok button.
You should not have any problem with drivers from first and third link.
Now you have all important drivers installed.
Thanks [email protected] for drivers.
Flashtool:
https://mega.nz/#!O05Q2ZSL!mOVtYCDD2qhEoCdmATj3UKWmxLRF5H7EDeg-sUMK6Q8
ROOT:
BEFORE ROOTING - MAKE SURE, YOU HAVE ENABLED "UNLOCK OEM" - UNLOCK BOOTLOADER - IN DEVELOPER OPTIONS.
For ROOT your device please download this ZIP and flash it in TWRP recovery.
https://download.chainfire.eu/696/SuperSU/
You can ROOT your HT6 in stock recovery too. - download this zip and flash it in stock recovery:
https://mega.nz/#!nppWFBxA!fqYIakLzpSkZPM2ck2cFcMwhn0hpuUwMRNIKTiQ2mIQ
Patches and Fixes for HomTom HT6:
HT6/T6 Power fix:
This patch is for fix battery percentage drops - flash in TWRP + wipe cache, dalvik
this patch will take effect after cca 3 full charges.
download: https://mega.nz/#!X0QyhYJS!8EWhkit69S0eni3uX3rdy3pe_oerf-jVkiAoouJixlQ
Thanks: Mardaly - 4PDA.ru
source: http://4pda.ru/forum/index.php?s=&showtopic=709131&view=findpost&p=50595464
Xposed Framework:
1) you must have TWRP recovery installed and you must have ROOT
download xposed here:
.apk : http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
flashable .zip: in attachments
First install the apk, than flash the zip using twrp.
WARNING: First boot after install xposed will be very long - phone will be very long on android is upgrading screen and you will get a lot of reboot - 15, maybe more reboots. Dont worry, it is normal, after it xposed will work ok. Tested on my phone and all is ok.
screen - working xposed on ht6 - http://uploads.tapatalk-cdn.com/20160127/f11bc444bf2672c6d33141f71098f6df.jpg
For Xposed thanks to: Ryder55 @xda
If you like my work, please hit Thanks button.
HOMTOM HT6 - How to install TWRP recovery and ROOT this device.
Option 1 - Flashing TWRP and flashing supersu.zip
*NOTE: If you have ROOT, you can flash TWRP recovery via app Flashify - DL on google play.
1) download and install all drivers
2) download twrp recovery for HT6 and extract it somewhere.
3) download Flashtool
4) download supersu.zip and copy it in your sdcard.
5) turn phone off and prepare usb cable
6) open flashtool - http://postimg.org/image/929l19yjh/full/
7) select scatter file from extracted archive with twrp recovery for HT6 - http://postimg.org/image/6idy76azh/
8) make sure recovery is checked, select download only and click on download - http://postimg.org/image/siuanstnh/
9) now connect your phone via usb cable.
10) when flash is completed - green icon will appear - close it.
11) now you can unplug your phone and boot into TWRP
12) hold volume + and power in same time.
13) menu should appear, you can select recovery, bootloader, etc...
14) you can move in menu by pressing volume up. Volume down is confirm button.
15) select recovery
16) now you should be in twrp recovery.
17) select install, select supersu v2.46.zip and confirm flash.
18) now you have TWRP installed and ROOTED your HT6. You can go back, select reboot > system.
DONE.
Option 2 - flashing root via update.zip in stock recovery
1) download root update.zip and copy it on your sdcard after it go to settings> developer options > unlock oem and enable it.
2) turn off your phone
3) hold volume + and power in same time
4) in menu select recovery - move in menu by pressing volume + and confirm button in volume down button.
5) now you are in android recovery - now you must get acces in recovery menu.
6) hold power button and hit volume up button - menu should appear
7) select apply update from sdcard
8) select update.zip - in menu you can move via volume buttons - power is confirm button
9) confirm flash.
10) go back . . / and select reboot system now
11) now you have rooted your HT6 via stock recovery.
Option 3 - flashing root via update.zip -easiest way
1) download root update.zip from first post.
2) go to settings> developer options > unlock oem and enable it, after it go to settings>about phone > wirelles update
3) in right corner select ... (three dots) > select local updates and select update.zip
4) confirm update - phone reboots and install update automatically
5) You have ROOT
Custom ROMs
Leagoo Elite 5 For HomTom HT6
Download ROM: https://drive.google.com/file/d/0B_WxPbXlWh9pUzBVdmE2dHFKOTA
Thanks: Keksik1980 - 4PDA for port.
bugs: -
YunOS 3.0.5 for HomTom HT6
Download ROM: https://yadi.sk/d/RAP0lnrytzcUX
Download camera fix: https://yadi.sk/d/ltn1w4vetzYN7
Thanks: Keksik1980 - 4PDA for port.
bugs: -
Languages: EN/RU
Resurrection Remix 5.5.9 for HomTom HT6
DL: https://yadi.sk/d/uzOOqngfu4YYY
Thanks: Keksik1980 - 4PDA for port.
bugs: ?
AOSP for HomTom HT6
DL:https://yadi.sk/d/TzRWvKedtxu8p
Thanks: Keksik1980 - 4PDA for port.
bugs: ?
CyanogenMod 12.1 for HomTom HT6
DL: https://yadi.sk/d/brKZT28-sRLdU
Thanks: lexa6074465 - 4PDA for port.
bugs: - camera works only on 8MP - no focus
HOMTOM HT6 Alternative Rom v3.0 Black Edition
source:http://4pda.ru/forum/index.php?showtopic=709131&st=1180#entry48056999
Download ROM:: https://yadi.sk/d/yfwbDvCXsJZo6
Patches:
-
Xposed:
flash zip: https://mega.nz/#!mxY1VLbK!jegzyjMEh8BG5TnhHQlSHjmmw2UgD6k74FDGY7B4e58
.apk: https://mega.nz/#!Ktg0xYTA!nXHfiEem64XKWjVJdz5wVEI3PGtdZUmn7Q52AVO6drM
first install .apk, after it flash zip.
Thanks [email protected]
-----------------------------------------------------------
AoROM v1 - MOD ROM from Oukitel K6000 for HT6
Thanks kalipso888 - 4pda.ru
Download ROMhttps://yadi.sk/d/dw8_W5g3oqYCA
Download Patch v1 - https://mega.nz/#!uooAwZSB!ENDXswGE8cOgM2S4mfzCV73QioPs_aFuSfgmwnfJAoA
Download better camera libs: https://mega.nz/#!Cx5kiaxB!cTinf0Fof7OaN6dqdkjDShTI9Q-wJCTnLGxScdD_TQY
Thanks madarly - 4pda.ru for patch, libs and sdfix
Thanks: 4pda.ru http://4pda.ru/forum/index.php?showtopic=709131&st=780#entry47119937
some changes:
Better camera quality
Better battery life
Better network managment
Dolby Atmos
Better performance
Faster and smoothest UI
Better speaker and headphone output quality
Faster wifi connection
Better RAM managment
Updated Google Apps
Lower phone temperature
Alarm working in quet mode
Better APN settings
DingDing Heat8 ROM for HT6
link: http://forum.xda-developers.com/showpost.php?p=65765910&postcount=123
HOMTOM HT6 - STOCK ROMs from DOOGEE T6 flashable in TWRP
Doogee T6-R06 DEODEX
https://yadi.sk/d/SW0I3rgFnicma
Doogee T6-R05 DEODEX_v1
https://yadi.sk/d/8Mch4uLOnjr94
Thanks to: mardaly @4pda.ru
Unbrick Tutorial / Back to STOCK ROM Here is unbrick/update tutorial for those who are in bootloop, or for those, who want to update or restore phone to stock ROM with SPFlashTool method.
*NOTE: READ!!!! All your files will be deleted. Please backup your internal storage.
This process will not format your SDcard.
*NOTE2: If you dont want to lose your phone data, you must uncheck userdata field in flashtool. - Step 4E
- This step is experimentall and it can cause problems and bad system stability. Please do not use this step if you are comming back to stock/official rom from custom rom.
- This step is possible to use, if you are restoring your phone from bootloop after OTA update on rooted phone.
---------------UNBRICK GUIDE-----------------
1) Download all important files:
A) Download all Drivers from first post and install it. - If you have win8/8.1/10 use my tutorial how to install it - in first post too. - here
B) Download latest STOCK ROM from here and extract it : http://www.needrom.com/download/homtom-t6/ (latest version is R17 - 20160513, maybe Homtom will release new updates, just download latest version - R17 here: https://yadi.sk/d/4AOdC_9hv3ttR)
C) Download flashtool from here and extract it: https://mega.nz/#!O05Q2ZSL!mOVtYCDD2qhEoCdmATj3UKWmxLRF5H7EDeg-sUMK6Q8
2)Power off your phone - if you are in bootloop just hold power button until phone power off.
3) Prepare original Homtom USB(charging) cable - Do NOT connect your phone in PC - I will tell you when you must connect your phone.
4) Follow this pictures:
A) In PC open Spflashtool folder and open Flashtool as administrator - http://s22.postimg.org/5na2xf4ip/ht6unbrick1.png
B) Press ok button - http://s22.postimg.org/ti7v9izkx/ht6unbrick2.png
C) Select scatter loading button - http://s22.postimg.org/ttpbmag0x/ht6unbrick3.png
D) Navigate to extracted STOCK ROM folder and sellect android scatter file - http://s22.postimg.org/y1k3v1hgh/ht6unbrick4.png
E) Make sure - all things like system,recovery,userdata,preloader,tee1,tee2,etc are checked, select download only and select Download button with green arrow. - http://s22.postimg.org/r261vohi9/ht6unbrick5.png
F) Make sure your phone is still powered OFF. Now you must connect phone to PC with Original USB cable
G) flashing proces should start - http://s22.postimg.org/ixxxqxv35/ht6unbrick6.png on the bottom of flashtool you can see yellow bar with percentage.
H) When process is finished - green symbol will appear - http://s22.postimg.org/8p5gl471d/ht6unbrick7.png
I) Now you can close this window, unplug your phone and close flashtool application.
J) You can power on your phone. First boot is little bit longer than normal boot, so just wait until android will boot completely.
K) Enjoy
Touchscreen Fix Tutorial By Spoooky1
I finally got success to recover my touchscreen so I submit my tutorial.
First, there is no need for some chineses softwares like 360??? (setup_10.2.0.2001a.exe or instmobilemgr.exe). The really most important is :
- a HT6 rooted
- a PC with adb drivers installed
- download HT6digitizer.zip, unzip it on the desktop (for instance)
Step 1 : power on the HT6 with a BT mouse (or a USB mouse plugged with OTG cable) and go to :
Settings -> Developer options -> enable Stay awake and USB debugging (both are very important !)
Step 2 : connect the HT6 and the PC with a USB cable
on the PC, go to HT6digitizer folder and launch a MSDOS window (in admin mode) then type adb devices inside
if your HT6 is unauthorized then take a look at your HT6 and go next step, else go to step 5
Step 3 : the most difficult without a BT mouse ! :crying:
This popup should appear and you have to select "Always allow from this computer" and click OK
Step 4 : If the previous job is well done, type again adb devices and now your HT6 is authorised (else disconnect the HT6 and go back to Step 2)
Step 5 : type adb shell ls /proc/gm* in the MSDOS window and NOTE the result (very important !!)
(the result is /proc/gmnode20160312 in my case)
Step 6 : On the PC, go to HT6digitizer folder and launch GtpAdbTool_ENU.exe (in admin mode)
Fill the popup with the previous result and click on Determine button
Step 7 : then IC type and IC version should appear. Click on Browse button
Step 8 : choose the GT9157_Config_20160305_225004.cfg file and click on Open (Ouvrir in french :angel: )
Step 9 : select Send config and click on Perform operation
Step 10 : Finish ! all is green, you can use your touchscreen
Special Thanks to : kalipso888 , Ax1qwer , flasource_ , Zeggi :good:
Hello.Does anyone know if this power bank http://www.banggood.com/Qualcomm-Ce...2W-Quick-Charge-2_0-Power-Bank-p-1004535.html support fast charge for homtom ht6?
or any other powerbank that supports it? Because now i have a romoss sense 4 which gives in output 5v 2.1A but ht6 charges very slow.
clio94 said:
Hello.Does anyone know if this power bank http://www.banggood.com/Qualcomm-Ce...2W-Quick-Charge-2_0-Power-Bank-p-1004535.html support fast charge for homtom ht6?
or any other powerbank that supports it? Because now i have a romoss sense 4 which gives in output 5v 2.1A but ht6 charges very slow.
Click to expand...
Click to collapse
Hi, I am using Xiaomi 10400mah powerbank and charging is fast.
HT6 using Mediatek Pump Express fast charging technology and I think it is not compatible with Qualcomm Quick charge. But maybe I am wrong.
TWRP flashing tutorial + root guide with pictures comming soon.
Hi! Using this smartphone I noticed that the data network connection (E, H+, 3G, 4G...) is shown REALLY LARGE in the status bar. Is there any way to make that disappear? Thanks!
Archah said:
Hi! Using this smartphone I noticed that the data network connection (E, H+, 3G, 4G...) is shown REALLY LARGE in the status bar. Is there any way to make that disappear? Thanks!
Click to expand...
Click to collapse
I think icon can be deleted via Xposed, but there is no working Xposed for HT6 now, we must wait for clear AOSP custom ROM, xposed should be running fine on it.
Now xposed is not working on HT6.
Edit: TWRP flashing and ROOTING tutorial added in second post
why you dont use option 2 . it is more easy ?
There is a third option at the root, load a package update.zip system in place upgrade, select the file and restart the phone.
@ Ax1qwer -Please add the 3 options - quick and easy
You can install Xposed using xposed 3.0 alpha 4 and flashing xposed 79__ver22.zip from twrp. You can find the how to on xda. Im currently running xposed on my HT6. Thanks for your flashing guide.
Easiest way to root the ht6 is to download update.zip for the stockrom, go to settings-about-wireless update-menu and select local update-choose the update.zip file and select update. It should flash from there.
Hi, thanks ozmatox and Ryder55. I will try xposed and i will add 3rd root option - it is same as option 2, but phone reboot to recovery and flash update.zip automatically
Odesláno z mého HT6 pomocí Tapatalk
Mobile rooted. Thx
Everyone have change dpi ? Witch dpi is compatible ?
Ryder55 said:
You can install Xposed using xposed 3.0 alpha 4 and flashing xposed 79__ver22.zip from twrp. You can find the how to on xda. Im currently running xposed on my HT6. Thanks for your flashing guide.
Easiest way to root the ht6 is to download update.zip for the stockrom, go to settings-about-wireless update-menu and select local update-choose the update.zip file and select update. It should flash from there.
Click to expand...
Click to collapse
Please give us a link for working xposed, thanks. I searched for google for xposed 79__ver22.zip, but no success. Thanks.
Edit: root via local updates added
http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
This is the apk
http://forum.xda-developers.com/attachment.php?attachmentid=3580244&d=1450386592
This is the zip
First install the apk, then flash the zip using twrp. Hope the links work. I'm a bit new to xda
Sent from my HT6 using XDA Free mobile app
I installed xposed apk, after it I flashed TWRP via SPflash tool, I booted in TWRP and flashed xposed zip and supersu.zip, but my phone is in bootloop now. I am using latest R14 ROM., I think this xposed is not working on HT6.
Ax1qwer said:
I installed xposed apk, after it I flashed TWRP via SPflash tool, I booted in TWRP and flashed xposed zip and supersu.zip, but my phone is in bootloop now. I am using latest R14 ROM., I think this xposed is not working on HT6.
Click to expand...
Click to collapse
You should have installed SuperSU before flashing xposed. I am using the R14 firmware with xposed and running xprivacy so I know for sure that xposed is working. My phone has entered a form of bootloop where it tries to optimize apps but this doesnt happen very often and sometimes it ceases when left alone. Anyways those are the steps I followed to get xposed working.
Sent from my HT6 using XDA Free mobile app
Ryder55 said:
You should have installed SuperSU before flashing xposed. I am using the R14 firmware with xposed and running xprivacy so I know for sure that xposed is working. My phone has entered a form of bootloop where it tries to optimize apps but this doesnt happen very often and sometimes it ceases when left alone. Anyways those are the steps I followed to get xposed working.
Sent from my HT6 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, I know - my mistake. I uninstalled Xposed and flashed it again, but still reboots on android is upgraging screen
EDIT: Many and many reboots, but it seems Xposed is working and phone boots up sucessfully But about 15, maybe more reboots.
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Custom ROM
- CyanogenMod 13 Beta 2 by "smurad-05": https://mega.nz/#!kMcRwTDb!1yrNzrP_XvqGyPcXzNF9eSRKfj1DpFixkUaNz_3OPAY
Stock (Android 6.0)
- 20161202: https://yadi.sk/d/rYoOTrUT32xDuL or http://www.leagoo.com.my/support/firmware/
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Download Only" instead.
Previous Releases:
- 20160909: http://leagooftp.com.my/M series/M5..._WF562G.LEAGOO.M0.HB.H.SSA.B18.0909.V3.03.zip
- 20160808 by "smurad-05": https://mega.nz/#!8V93SYaI!E4FOHWBxCFU6TKFmjguu7x3A3590Zt2W-c9KgNLgOLU
Flash Tool
- SP Flash Tool v5.1628 for Windows & Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP (Universal), use the Scatter that comes with the latest Stock ROM linked above: https://github.com/VRNWALLE/Android/raw/master/MT6580/Leagoo m5/TWRP/recovery.img
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
CM13 & TWRP added to first post.
dear my freind, how to install twrp?
thanks
@yamani_25 - Haven't done it myself, but first root your phone (see bottom of http://giveawaytricks.in/install-cyanogenmod-13-leagoo-m5/) then install TWRP the same way but using the recovery.img that's in the TWRP.3.0.2 zip file.
vladhed said:
@yamani_25 - Haven't done it myself, but first root your phone (see bottom of http://giveawaytricks.in/install-cyanogenmod-13-leagoo-m5/) then install TWRP the same way but using the recovery.img that's in the TWRP.3.0.2 zip file.
Click to expand...
Click to collapse
I think install TWRP first than the device can be root. CMIIW
Sent from my M5 using XDA Premium 4 mobile app
yup, first you need TWRP for root the phone with SuperSu..
waiting for tutorial too..
from my x500 on TT
tutorial for installing custom recovery (twrp) and how to root
Hi guys! Here's a tutorial for installing custom recovery (twrp) and how to root Leagoo M5 cellphone.
First turn on the cellphone, go to "Settings>About phone" and enable "Developer options" by tapping on the "Build number" multiple times. Then go one step back, enter the "Developer options" and turn it on, and also enable the "OEM unlocking" and "USB debugging" options
Now you need to install custom recovery by following these steps:
1. plug the cellphone into pc, unzip and manually install drivers by going to "control panel>device manager" (select the device which needs drivers).
drivers are located here
https://drive.google.com/file/d/0B4PwJKhC6foZZnBzY0RPQnhHX2s/view?usp=sharing
2. download to pc and unzip the twrp custom recovery zip file
https://drive.google.com/open?id=0B4PwJKhC6foZc1czcnZtRXQ4eUU
3. download to pc and unzip the Sp Flash tool zip file
https://drive.google.com/open?id=0B4PwJKhC6foZcWJQVThGTGhzaTQ
4. download to pc, but do not unzip the "super su" file needed for root
https://drive.google.com/open?id=0B4PwJKhC6foZQzA0OGtYRTVRWnc
Now copy this "supersu" zip file to cellphone (e.x. into "Download" folder). Once you're done, disconnect the cellphone from pc and turn it off.
5. go into "Sp Flash tool" folder and run "flash_tool.exe" application. Click on the "Download tab" at the top and then on the "Scatter-loading" button to select a path to Scatter file which is needed to flash custom recovery. The file is located in the "TWRP_3.0.2" folder and it is named "MT6580_Android_scatter.txt". The mode for flashing should be "Download only". When you're sure that everything is setup correctly click on the "Download" button located in the top left part of the screen.
6. Now take out a battery from cellphone, wait 5 seconds, put it back in, and just connect the cellphone. Do not turn it on.
Windows (PC) should recognize the device, and the flashing process should start.
Note: if it says that there is no driver, then manually install it by following procedure on step 1.
When the flashing is done you'll see a green checkmark. It's ok now to close the app and to disconnect the cellphone from the pc.
7. Cellphone will boot to startup menu, you should choose "Recovery" to enter TWRP custom recovery.
When you're in recovery go to "Mount" and mount (select) following partitions: protect_f, protect_s, nvdata, System, Cache and Data.
Now it's time to perform root. Go back from "Mount" screen, tap on "Install", find and select "SuperSU_PRO_v2.76_patched_Cobra1111.zip" file and flash it.
When the flashing is done click on "delete cache and dalvik cache", and then reboot cellphone.
8. Let the cellphone boot, it should take a few minutes. When it's booted you'll see the "SuperSU" app installed on your cellphone homescreen.
You're done! Enjoy!
Note:
I've collected these files on the internet. All of credits should go to their authors, so please thank to them!
One more thing. I would advise you to perform nandroid backup of your cellphone. Go into twrp recovery and perform backup (all partitions), save it to sd card and also copy that backup to pc, just in case something goes wrong.
Bye,
cuks
@cuks [emoji482]
from my x500 on TT
tutorial - how to update youtube app
as you all know, youtube app on the Leagoo m5 is an very old version. in order to update it you need to do the following:
note: you have to have a rooted phone
1. install file manager app which can access system partition (es file explorer, root explorer, etc.)
2. start file manager, go to /system/priv-app and move the folder named "Youtube" to another directory outside /system, e.g. to /sdcard/Download
3. restart the phone
4. install the youtube app from the google play
enjoy!
cuks said:
as you all know, youtube app on the Leagoo m5 is an very old version. in order to update it you need to do the following:
Click to expand...
Click to collapse
ARGH, didn't noticed this, but really, the youtube app got frozen every time on the stock rom. That's why i changed to this Cyanogen.
That's the reason why I wrote this tutorial
What are your experiences with cm rom? Are you satisfied? Is there any bugs? What's about battety life?
cuks said:
That's the reason why I wrote this tutorial
What are your experiences with cm rom? Are you satisfied? Is there any bugs? What's about battety life?
Click to expand...
Click to collapse
Not sure about battery life sorry, i'm trying to keep it charged
But i still have problems with youtube (however i'm not an experienced user): sometimes it halts, mostly in 720p/HD videos. The picture freezes, audio is working. Sometimes the video gets zoomed to the left upper corner with a black banner in the left. This could be an app-problem though.
cuks said:
That's the reason why I wrote this tutorial
What are your experiences with cm rom? Are you satisfied? Is there any bugs? What's about battety life?
Click to expand...
Click to collapse
Oops, fingerprint sensor doesn't work with CM.
Well, that's bad.
I have thought that the cm rom has the all functionality.
Better to stay on stock rom then. Only problem with it is sending images from within whatsapp, because it works on only one awkward way.
i wrote this before, without kernel source fingerprint cant work, same problem on my Leeco Le 1s..
from my x500 on TT
I cant scan the whatsapp web QR code with stock rom... (Whith third apps i can)
Today Leagoo launched a new patch LEAGOO_M5_FreemeOS_20160728_TEST with some bug fixed.
Is there a way to un-root after fixing YouTube? MobileIron refuses to work on a rooted phone, probably because it's a security hole.
Thanks!
you can unroot directly from SuperSu apk.. try it..
from my x500 on TT
Hello guys,
i have a problem with my battery ( drain out too fast - 25% in 30 min - and charge really slow - full charge in 6h+ !!! )
I suspect that this is caused due to the official update i made but the strange thing is that my mother's m5 with the same update is ok.
Is there any " official " way to go back to the original version to check it without doing all this process you analyzed ?
Ps. I checked my apps / settings, cleared chase, made factory reset, changed charger, checked my battery with apps and is in a good condition,
so i concluded that problem has to be there. Any ideas ?
divinitygr said:
Hello guys,
i have a problem with my battery ( drain out too fast - 25% in 30 min - and charge really slow - full charge in 6h+ !!! )
I suspect that this is caused due to the official update i made but the strange thing is that my mother's m5 with the same update is ok.
Is there any " official " way to go back to the original version to check it without doing all this process you analyzed ?
Ps. I checked my apps / settings, cleared chase, made factory reset, changed charger, checked my battery with apps and is in a good condition,
so i concluded that problem has to be there. Any ideas ?
Click to expand...
Click to collapse
GPS on maybe?
from my Leagoo M5 on TT
I bought a cracked version of the 4/64 version of Xiaomi Qin F21 Pro unlocked bootloader, rooted, and with preinstalled fully working Google Playstore and Play services running on the official firmware 2.0.8.
But lately there's a very nice update development from 4PDA website for the device! It took me a while before I made it work and a lot of trial and error.
I will make a full detailed easy to follow step by step tutorials on how to do it with all the links for the files required.
The results will be:
A fully converted v1.1.1 custom firmware without the chinese apps
TWRP Recovery
fully rooted
certified playstore and google services fully working
THE PROCESS COULD ALSO UNBRICKED THE PHONE
Requirements:
PC
UNLOCKED BOOTLOADER Xiaomi Qin F21 Pro (MTK soc) V1.0+ V2.0+ (4/64gb ONLY)
Files (will be provided)
working brain
CREDITS:
4PDA FORUMS device thread
Telegram Group
DEVS for the unlock bootloader tool
DEVS for the Custom Firmware
DEVS for porting TWRP
testers
many more I probably forgot
...........TUTORIALS SOON
TUTORIAL UPDATE!
MY DEVICE IS 4/64 with unlocked bootloader
Unofficial Qin F21 Pro (MTK chipset) firmware, version 1.1.1 multilanguage.
Thanks to @redsat, @gaguga and the whole 4pda community.
Install at your own risk and responsibility.
For testing purposes only, will be updated or changed if necessary.
Use SP flash tool for flashing, bootloader should be unlocked on the phone (via @mlgmxyysd tool or Ubuntu boot image). Having the full own ROM dump is highly recommended in advance.
Changes:
-Removed chinese applications
-Decrypted data partition
-APK installer with no restrictions
-System partitions are writable
TWRP recovery 3.6.0_11-0 is added
(In TWRP the phone memory is accessible via path: /data/media/0)
WARNING: FLASHING THE FIRMWARE WILL WIPE EVERYTHING! I SUGGEST BACKUP IMPORTANT FILES BEFORE DOING THIS. I WILL NOT BE HELD RESPONSIBLE IF YOUR PHONE DONT BOOT, SOFT/HARD BRICKED! THIS TUTORIAL IS TO DO AT YOUR OWN RISK!
ALL FILES REQUIRED FOR WINDOWS https://www.mediafire.com/file/tl8hv77gl0vo6sd/qin_f21_pro_mtk.zip/file
download and extract zip
extract "F21PRO_1.1.1 (2).zip" (the firmware)
extract "SP_Flash_Tool_V5.zip" (flash tool)
install drivers
open "flash_tool.exe"
select scatter file from the firmware folder
click download
turn phone off
hold back button then plug usb cable to pc. It should start flashing
after download complete, unplug then boot to TWRP then reset factory
Congrats! You now have chinese free apps firmware with TWRP Installed
If it wont boot "DEVICE ENCRYPTED", just go to TWRP and FORMAT DATA then reboot (it should boot to system now)
transfer "boot_2.img" phone or transfer it to a USB Flashdrive (more easier to locate) (FOR 3/32 VARIANTS TRY TO USE THIS BOOT IMAGE BOOT.IMG 3/32)
boot to TWRP once again
go to device path /data/media/0 or USB storage path using OTG
FLASH IMAGE "boot_2.img" to boot partition to fix the device twrp path to /sdcard (IMPORTANT! boot is an IMAGE FILE not ZIP FILE. by default, TWRP is set to check for zip file and will n0t se IMAGE FILES in the directories. YOU NEED TO TAP THE INSTAL IMAGE BUTTON so image files will appear)
reboot and proceed to installing ROOT and Google services
HOW TO BOOT TWRP:
* + heart button (upper left) + power on. once douqin logo appears press up button + power on immediately. TWRP first boot is in Russian language. just change it to english change twrp language
HOW TO ROOT + GAPPS with playstore certified + fix keypad annoying issue
transfer all the app APK from the "APK" folder youve download
install everything (QinPad be a more stable keypad input)
open gboard and enabled both gboard and QinPad (this should give you a quick switch of input in the notification bar everytime you will type something)
open MAgisk app and update the apps to 22.1. phone reboots (DO NOT UPDATE TO VERSION 24.3)
Open magisk again then Install Magisk > Select a patch file > choose "boot_2.img" in your directory (path where you transfer it)
transfer "open_gapps-arm64-11.0-pico-20211217.zip" to device
boot to TWRP
FLASH IMAGE "boot_2.img_patch" IN THE BOOT PARTITION. then reboot. should be found in download path in TWRP
go TWRP again and flash "open_gapps-arm64-11.0-pico-20211217.zip"
reboot > SYSTEM
you will see playstore. you will have an annoying message "device isnt playstore certified" just ignore it
open MAGISK app go to settings and enable MAGISK HIDE, search module and install "Busybox for NDK" then reboot
open MAGISK app, search module and install "MagiskHide Props Config" then reboot
open Terminal emulator app
type "su" enter (grant permission)
type "props" enter
type "1" enter
type "F" enter
type "30" enter
type "25" enter
type "2" enter
type "y" enter
type "y" enter (phone reboots)
after reboot wait gapps to update (around 5-10 mins) then sign in to playstore
you've now enter Playstore
go to playstore settings > about > click update playstore
wait for it to update the version and keep checking in playstore settings > about > IF DEVICE IS CERTIFIED
If the updated playstore still said " DEVICE IS NOT CERTIFIED", proceed to manual
install device id apps from playstore and copy your GSF ID
register it manually here > https://www.google.com/android/uncertified/?pli=1
go settings ~ apps and look for playstore and play services and clear data. reboot phone and Playstore should be certified!
Congats! your phone now is rooted with twrp, no more chinese apps, and with fully working google services. I suggest perform a TWRP backup and store it somewhere safe for future use.
HOW TO FIX NO/DELAYED INSTALLED APPS NOTIFICATIONS
Thanks for JawadEly for the info, it works!
1. Install all your apps
2. Install terminal emulator app and system app remover app from playstore (this will give you the apk path you want to systemize)
3. open magisk, search and intall "APP SYSTEMIZER" module then reboot.
4. open terminal emulator app
6. type "su" and grant the permission
7. type "systemize"
8. You need to set Selinux = TRUE by choosing "s"
9. once its set to TRUE, you can now systemize any app provided you know the apk path of the apps installed.
10. enter "3", here is where you put the apk path of the app you want to systemize
11. to get the apk path of installed app open the "system app remover" app you installed.
12. go to user apps and LONG PRESS an app you wish to systemize.
13. copy the apk path then go to terminal emulator and paste it. Type "1" to confirm.
14. Go to settings > apps list > clear storage of that app you transfer as system app
15. done! just repeat the proceedure for each app you wish to fix the notifications.
BEWARE! Be careful using system app remover. Don't uninstall system apps required for the android system. You might end up in a bootloop. This app is also used to remove bloatwares of OEM firmwares.
I made this tutorial as DETAILED and as EASY TO FOLLOW as posible. Credits to 4pda community group and for individuals who contributed that made all this posible. Sorry if my English bad. Not my native language. If you lke the tutorial, you can buy me a beer.
paypal > [email protected]
gcash > 09912293147
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello, I have an F21PRO I am looking for a custom firmware, saw your tutorial, but only saw the directory, there is no specific tutorial, so when you update, please notify me. Thank you，I am using a translator to talk to you, please understand
keep us posted, looking forward to this!
really looking forward to this, mostly about having custom recovery for this phone!
Any updates for that? It's been 2 months since this was posted.
sorry just got too busy but here it is now! enjoy
Can I change qinpad language? or duoqin IME language? I want to change Korean, but I can't find the way.
Thanks a bunch bro, Followed all the steps and somehow I managed to get it working. M a d
Cheers!
thank you, will this recognise uk area codes?
please help I can not install qinpad, it says app not installed?
Jbazt_katuforzs said:
UPDATE! MY DEVICE IS 4/64 with unlocked bootloader (must)
Unofficial Qin F21 Pro (MTK chipset) firmware, version 1.1.1 multilanguage.
Thanks to @redsat, @gaguga and the whole 4pda community.
Install at your own risk and responsibility.
For testing purposes only, will be updated or changed if necessary.
Use SP flash tool for flashing, bootloader should be unlocked on the phone (via @mlgmxyysd tool or Ubuntu boot image). Having the full own ROM dump is highly recommended in advance.
Changes:
-Removed chinese applications
-Decrypted data partition
-APK installer with no restrictions
-System partitions are writable
TWRP recovery 3.6.0_11-0 is added
(In TWRP the phone memory is accessible via path: /data/media/0)
Separate TWRP as boot.img attached as well (thanks to 4pda comrade @yurxxl)
Also you can install Magisk and GAPPS as zip packages via TWRP.
WARNING: FLASHING THE FIRMWARE WILL WIPE EVERYTHING! I SUGGEST BACKUP IMPORTANT FILES BEFORE DOING THIS
ALL FILES NEEDED for WINDOWS https://www.mediafire.com/file/tl8hv77gl0vo6sd/qin_f21_pro_mtk.zip/file
download and extract zip
extract "F21PRO_1.1.1 (2).zip" (the firmware)
extract "SP_Flash_Tool_V5.zip" (flash tool)
install drivers
open "flash_tool.exe"
select scatter file from the firmware folder
click download
turn phone off
hold back button then plug usb cable to pc. It should start flashing
after download complete, unplug then boot to TWRP then reset factory
Congrats! You now have chinese free apps firmware with TWRP Installed
If it wont boot "DEVICE ENCRYPTED", just go to TWRP and FORMAT DATA then reboot (it should boot to system now)
transfer "boot_2.img" phone or transfer it to a USB Flashdrive (more easier to locate)
boot to TWRP once again
go to device path /data/media/0 or USB storage path using OTG
FLASH IMAGE "boot_2.img" to boot partition to fix the device twrp path to /sdcard
reboot and proceed to installing ROOT and Google services
HOW TO BOOT TWRP:
* + heart button (upper left) + power on. once douqin logo appears press up button + power on immediately. TWRP first boot is in Russian language. just change it to english change twrp language
HOW TO ROOT + GAPPS with playstore certified + fix keypad annoying issue
transfer all the app APK from the "APK" folder youve download
install everything (QinPad be a more stable keypad input)
open gboard and enabled both gboard and QinPad (this should give you a quick switch of input in the notification bar everytime you will type something)
open MAgisk app and update the apps to 22.1. phone reboots (DO NOT UPDATE TO VERSION 24.3)
Open magisk again then Install Magisk > Select a patch file > choose "boot_2.img" in your directory
transfer "open_gapps-arm64-11.0-pico-20211217.zip" to device
boot to TWRP
FLASH IMAGE "boot_2.img_patch" should be in download path
flash "open_gapps-arm64-11.0-pico-20211217.zip"
reboot THE CURRENT SLOT
you will see playstore. you will have an annoying message "device isnt playstore certified" just ignore it
open MAGISK app go to settings and enable MAGISK HIDE, search module and install "Busybox for NDK" then reboot
open MAGISK app, search module and install "MagiskHide Props Config" then reboot
open Terminal emulator app
type "su" enter (grant permission)
type "props" enter
type "1" enter
type "F" enter
type "30"
type "25"
type "2"
type "y" enter
type "y" enter (phone reboots)
after reboot wait gapps to update (around 5-10 mins) then sign in to playstore
you've now enter Playstore
go to playstore settings > about > click update playstore
wait for it to update the version and keep checking in playstore settings > about > IF DEVICE IS CERTIFIED
If the updated playstore still said " DEVICE IS NOT CERTIFIED", proceed to manual
install device id apps from playstore and copy you GSF ID
manual register it here > https://www.google.com/android/uncertified/?pli=1
go settings ~ apps and look for playstore and play services and clear data. reboot phone and Playstore should be certified!
Congats! your phone now is rooted with twrp, no more chinese apps, and with fully working google services. I suggest perform a TWRP backup and store it somewhere safe for future use.
I made this tutorial as DETAILED and as EASY TO FOLLOW as posible. Credits to 4pda community group and for individuals who contributed to made this posible. Sorry if my English bad. Not my native language. If you lke the tutorial, you can buy me a beer. paypal > [email protected]
Click to expand...
Click to collapse
Thank you for this! I managed to get everything installed and running. Will be testing it out in the meantime! Thanks again bro! No more bloatware!
If you have a 32GB model, when using Flash Tool, uncheck the tickbox saying "userdata" as leaving this on will completely brick your device.
jason24589 said:
If you have a 32GB model, when using Flash Tool, uncheck the tickbox saying "userdata" as leaving this on will completely brick your device.
Click to expand...
Click to collapse
thanks for the heads up. but can you confirm too that it can still be re-flash again by holding back button if it got bricked?
Jbazt_katuforzs said:
thanks for the heads up. but can you confirm too that it can still be re-flash again by holding back button if it got bricked?
Click to expand...
Click to collapse
I'm not sure. I found that warning from a Telegram group 3 days ago as someone already bricked their 32GB model when they flashed it with userdata option left being checked
harahaum1 said:
Can I change qinpad language? or duoqin IME language? I want to change Korean, but I can't find the way.
Click to expand...
Click to collapse
I'd suggest to use Traditional T9 IME app. Not sure if this supports Korean as most of the languages supports English, French, Russian, etc.
jason24589 said:
I'm not sure. I found that warning from a Telegram group 3 days ago as someone already bricked their 32GB model when they flashed it with userdata option left being checked
Click to expand...
Click to collapse
i think its in the buildprop. anyways 3/32gb variants, DONT TRY THIS TO YOUR PHONE. TUTORIAL ONLY FOR 4/64.
Pixel launcher. Nice alternative launcher i confirmed works! Install using magisk
https://forum.xda-developers.com/t/magisk-pixel-launcher-for-android-11.4213619/
hello, I can't extract "F21PRO_1.1.1 (2).zip" (the firmware). the zip is corrupted. can you re-upload the firmware please?
thanx
Chabanda said:
hello, I can't extract "F21PRO_1.1.1 (2).zip" (the firmware). the zip is corrupted. can you re-upload the firmware please?
thanx
Click to expand...
Click to collapse
Try to use 7zip