Database Info

[Q] How to root lollipop 5.1?

Ok. So I managed to update my phone to 5.1. But now I've lost rooting rights. I found one thread already here saying to use KingRoot, but that did not work for me.
Can anyone give me a step-by-step way to root my Mate 7 with lollipop 5.1?
P's: the main problem being that I do not have an unlock code. When trying to get one from huawei I get a hw_account_member_error... If anyone has a solution to fix that...

dekraan said:
Ok. So I managed to update my phone to 5.1. But now I've lost rooting rights. I found one thread already here saying to use KingRoot, but that did not work for me.
Can anyone give me a step-by-step way to root my Mate 7 with lollipop 5.1?
P's: the main problem being that I do not have an unlock code. When trying to get one from huawei I get a hw_account_member_error... If anyone has a solution to fix that...
Click to expand...
Click to collapse
Ok all, I've got my bootloader unlocked. But how should I now root? What recovery image should I use??

dekraan said:
Ok all, I've got my bootloader unlocked. But how should I now root? What recovery image should I use??
Click to expand...
Click to collapse
Hello dekraan,
I have the same status with you. At this time, no way to root Ascend Mate 7 with OS 5.1. I tried to apply CWM recovery image (from OS 4.4.2) for it but not succesful

If you guys have TL-10 you may want to check out post #7 of ACBKA's thread below:
http://forum.xda-developers.com/mat...overy-twrp-2-8-6-0-mate7-android-4-4-t3136588
I was able to flash supersu and gain root through his nogui recovery.

khoanb1 said:
Hello dekraan,
I have the same status with you. At this time, no way to root Ascend Mate 7 with OS 5.1. I tried to apply CWM recovery image (from OS 4.4.2) for it but not succesful
Click to expand...
Click to collapse
I rooted my phone using KingRoot, after some try and error. I used version 4.1.237 or something like that? But I do not have a custom recovery to flash, so unfortunately I can't do much. Wanted very badly to install Xposed, but you have to flash a part, so thats no good..

I also rooted my phone with Kingroot 4.0.1.237, and replaced Kinguser with SuperSu. Now the rooted phone works fine. Looking for any custom recovery image.

Kingroot works fine on Mate 7 Android 5.1

Kingroot does not work on Ascend Mate 7 5.1.1, build B324.
Can anyone advise. I have CWM recovery installed, tried to install SuperSU, which says successful, but still no root.

sjhannan said:
Kingroot does not work on Ascend Mate 7 5.1.1, build B324.
Can anyone advise. I have CWM recovery installed, tried to install SuperSU, which says successful, but still no root.
Click to expand...
Click to collapse
see my post at http://forum.xda-developers.com/showpost.php?p=63244212&postcount=360

sjhannan said:
Kingroot does not work on Ascend Mate 7 5.1.1, build B324.
Can anyone advise. I have CWM recovery installed, tried to install SuperSU, which says successful, but still no root.
Click to expand...
Click to collapse
You used an outdated version.
Use a more recent version. Version 2.46

I need step by step root mate7 mt7-l09
for lollipop 5.1.1 B324, Please.
ส่งจาก HUAWEI MT7-L09 โดยใช้ XDA Forums Pro.

How do you install superSU w/ twrp?
khoanb1 said:
see my post at http://forum.xda-developers.com/showpost.php?p=63244212&postcount=360
Click to expand...
Click to collapse

Easy Computer said:
How do you install superSU w/ twrp?
Click to expand...
Click to collapse
Press Power+Up at bootup. Choose Install from the menu and browse to supersu zip file

Got mine rooted but titanium backup says its not rooted. Any fix for this?
Sent from my HUAWEI MT7-TL10 using Tapatalk

Easy Computer said:
Got mine rooted but titanium backup says its not rooted. Any fix for this?
Sent from my HUAWEI MT7-TL10 using Tapatalk
Click to expand...
Click to collapse
Did you grant root for Titanium backup?

I want back stock recovery official to mate 7 TL-10 B324 android 5.1.1 Please help me ..

jamalnasir said:
I want back stock recovery official to mate 7 TL-10 B324 android 5.1.1 Please help me ..
Click to expand...
Click to collapse
View this Url http://forum.xda-developers.com/showpost.php?p=63260150&postcount=2

[SOLVED from FRD-AL00 to FRD-L09] Soft-bricked honor 8 FRD-AL00

I've an honor 8 FRD-AL00. I've fastboot installed and I'm able to access it. I'm also able to access eRecovery.
I've used SRK Tool to change the oeminfo and custom.bin. After trying to install the official L09 I think I bricked my phone.
Here are the steps I've done:
- Unlock bootloader
- Install recovery 6.0
- Root
- Changed oeminfo and custom.bin
- Reboot and tried to install a stock recovery.img boot.img and system.img (which failed while installing it) from offical L09 UPDATE.APP.
Current status: unable to boot either to recovery or android. what should I do in order to get my phone or install the L09 update or at least something that I can use? I've also used the 3 button trick with the dload/UPDATE.APP in the memory card but the phone doesn't show the loading screen it gets stuck into the huawei logo.
I've then tried to install CM13. I've successfully installed twrp-recovery.img but I'm not able to access it (button + vol down nor button + vol up).
Thanks for the help

djx24 said:
I've an honor 8 FRD-AL00. I've fastboot installed and I'm able to access it. I'm also able to access eRecovery.
I've used SRK Tool to change the oeminfo and custom.bin. After trying to install the official L09 I think I bricked my phone.
Here are the steps I've done:
- Unlock bootloader
- Install recovery 6.0
- Root
- Changed oeminfo and custom.bin
- Reboot and tried to install a stock recovery.img boot.img and system.img (which failed while installing it) from offical L09 UPDATE.APP.
Current status: unable to boot either to recovery or android. what should I do in order to get my phone or install the L09 update or at least something that I can use? I've also used the 3 button trick with the dload/UPDATE.APP in the memory card but the phone doesn't show the loading screen it gets stuck into the huawei logo.
I've then tried to install CM13. I've successfully installed twrp-recovery.img but I'm not able to access it (button + vol down nor button + vol up).
Thanks for the help
Click to expand...
Click to collapse
Why did you change the oenimfo and custom.bin?
Sent from my Galaxy Tab 3 using XDA Labs

adriansticoid said:
Why did you change the oenimfo and custom.bin?
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
My main goal was to try to change from FRD-AL00 to FRD-L09. (chinese version to european)

djx24 said:
My main goal was to try to change from FRD-AL00 to FRD-L09. (chinese version to european)
Click to expand...
Click to collapse
Go back To stock .. try dload method body

Romiui said:
Go back To stock .. try dload method body
Click to expand...
Click to collapse
Doesn't work, it gets stuck at the huawei logo.
After a couple of tries I was able to get TWRP installed so I'm able to access and modify the filesystem.
I've noticed that, for some reason, my phone has the "default.prop" set up to "ro.product.model=eva" shouldn't this be FRD's or something like that?
Can someone provide me a copy of their /default.prop file so I could compare?

djx24 said:
Doesn't work, it gets stuck at the huawei logo.
After a couple of tries I was able to get TWRP installed so I'm able to access and modify the filesystem.
I've noticed that, for some reason, my phone has the "default.prop" set up to "ro.product.model=eva" shouldn't this be FRD's or something like that?
Can someone provide me a copy of their /default.prop file so I could compare?
Click to expand...
Click to collapse
Yes. EVA is another Honor phone. It can be caused of the process you did earlier.
Sent from my Galaxy Tab 3 using XDA Labs

adriansticoid said:
Yes. EVA is another Honor phone. It can be caused of the process you did earlier.
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
Yes I think it's the P9, do you have a copy of a valid "default.prop" file?
Thank you

djx24 said:
Yes I think it's the P9, do you have a copy of a valid "default.prop" file?
Thank you
Click to expand...
Click to collapse
Unfortunately no man.
Sent from my Galaxy Tab 3 using XDA Labs

This is solved and I'm successfully running a FRD-AL00 with the FRD-L09C432B120 (EMUI 4.1 + Android 6.0). It's a painful process and I only recommend it to advanced users since you can brick your phone. I almost bricked mine.

djx24 said:
This is solved and I'm successfully running a FRD-AL00 with the FRD-L09C432B120 (EMUI 4.1 + Android 6.0). It's a painful process and I only recommend it to advanced users since you can brick your phone. I almost bricked mine.
Click to expand...
Click to collapse
Glad you fixed it.
Sent from my Galaxy Tab 3 using XDA Labs

Can you please share the instruction please? I have FRD-AL00 and I have followed the debrand steps from VDO - GUIDE
I can see the info that changed to FRD-L09C432B131 but when I play the video, the phone just restart.

Step by Step guide please

Transfer to European version
Hi, it whould be realy helpfull, if you consider to shere how you menadge to transfer to european rom from chinese al-00. It whoul hepl meny of forum members.
djx24 said:
This is solved and I'm successfully running a FRD-AL00 with the FRD-L09C432B120 (EMUI 4.1 + Android 6.0). It's a painful process and I only recommend it to advanced users since you can brick your phone. I almost bricked mine.
Click to expand...
Click to collapse

Hey , Why ???

I changed from AL10 to L19C432 an have the same problem. By pictures and videos my phone reboots.
but not always. can someone help me? thanks

mawe5 said:
I changed from AL10 to L19C432 an have the same problem. By pictures and videos my phone reboots.
but not always. can someone help me? thanks
Click to expand...
Click to collapse
I also have the same mistakes. Help please ...

For now a moment there is no solution for those issues - the only way is to change back to AL00.

Before you do, please install HiSuite, this tool installs all necessary drivers as well.
1) Unlock bootloader and install TWRP: https://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-tested-root-t3443946
2) ROOT: Download SuperSU and flash it using TWRP
2.1) Power off, press volume up + power on
2.2) After TWRP loads, click on Install, select SuperSU zip file you just downloaded and flash it
2.3) Reboot
3) Debrand: https://www.youtube.com/watch?v=JZVsIKtdgV4&t=307s
3.1) This video shows how to debrand P9 but it works on Honor 8 (AL00, AL10, AL09 and AL19)
4) Flash new ROM
4.1) More info about ROMs: https://forum.xda-developers.com/honor-8/how-to/frd-al-00-04-09-10-14-19-differences-t3452924
4.2) ALXX ROM download: https://forum.xda-developers.com/ho...rk-tool-huawei-bootloader-root-t3470823/page3
4.2) LXX ROM download: https://www.androidsage.com/2016/12...rshmallow-emui-5-0-4-1-stock-firmware-update/
Hope this helps but please note FRD-L09 ROM running on FRD-AL00 phone is unstable.
Please let me know if you have any other questions.
---------- Post added at 11:42 PM ---------- Previous post was at 11:39 PM ----------
qsqa said:
For now a moment there is no solution for those issues - the only way is to change back to AL00.
Click to expand...
Click to collapse
Do you know if is there any hardware difference between AL00 and L09? What is the reason phone gets so unstable when you debrand to L09 and flash EU ROM?

i have honor 8 FRD-AL00C00B377 , i need unlock bootloader, but no have option in developer ( OEM UNLOCK ) , in CMD the code , adb unlock bootloader ( my code ) no work , FAIL
i need change my chines version for internacional, is possible ???

aureliomilitao said:
i have honor 8 FRD-AL00C00B377 , i need unlock bootloader, but no have option in developer ( OEM UNLOCK ) , in CMD the code , adb unlock bootloader ( my code ) no work , FAIL
i need change my chines version for internacional, is possible ???
Click to expand...
Click to collapse
adb reboot bootloader
fastboot oem unlock xxxxxxxxxxxxxxxx
I think my command is right.

[GUIDE] Lenovo P2 Marshmallow Root

EXPLANATION
Hello friends, I will tell you how to get a Root without bootlooping Lenovo P2 device. Looking at other methods, you can get root without any problem if it is a little longer.
FOOTNOTE
Remember to take a backup of your device in case of any problems.
My, OneTeam and XDA are not Responsible for Possible Problems.
Your device needs to be unlocked by OEM.
Your device must have TWRP installed.
ROOT LOADING INSTRUCTIONS
First of all download all the Files Needed from Below.
When the download is completed, all files are discarded.
Install Magisk Manager Application from the link below.
Install PhH's SuperUser Application when installation is finished.
Once the installation is done, start your device in TWRP mode.
Then load the zip files you downloaded from below.
Install Install / Magisk-v11.1_OneTeam.zip.
When the installation is complete, install the Install / SuperUser- R259_OneTeam.zip file.
Restart the device when installation is complete.
Your device will be root when your device is restarted.
DOWNLOAD LINK
Magisk Mana​​​​​​ger​​​​
phh's SuperUser
Magisk-v11.1_OneTeam.zip
superuser-r259_OneTeam.zip
Credit
@wzedlare
@kaankulahli
@DeftonesOT

There is already a guide to root with TWRP.
Would be great if you find way to root with exploit - without TWRP

pabgar said:
There is already a guide to root with TWRP.
Would be great if you find way to root with exploit - without TWRP
Click to expand...
Click to collapse
That guide causes bootloop on F2FS.This method also works on f2fs file system.

I have a problem with this guide though. When I install Magisk through TWRP, when it flashes boot, it gets stuck, screen goes black for a while, then the phone vibrates and shows blue notification LED.... Really don't know what that's about

ThomBwha said:
I have a problem with this guide though. When I install Magisk through TWRP, when it flashes boot, it gets stuck, screen goes black for a while, then the phone vibrates and shows blue notification LED.... Really don't know what that's about
Click to expand...
Click to collapse
Turn off the phone and try again. The black screen and blue led is QFIL mode

Does this method will break OTA updates feature? Sorry if i'm asking a newbie question. I want to root my P2 but at the same time want to get OTA update so this is why making me keep stock till now

kenji1996 said:
Does this method will break OTA updates feature? Sorry if i'm asking a newbie question. I want to root my P2 but at the same time want to get OTA update so this is why making me keep stock till now
Click to expand...
Click to collapse
I do not know, I did not try

Would this root work for the P2c72?

Laubscherc said:
Would this root work for the P2c72?
Click to expand...
Click to collapse
Worked P2a42 and P2c72

kenji1996 said:
Does this method will break OTA updates feature? Sorry if i'm asking a newbie question. I want to root my P2 but at the same time want to get OTA update so this is why making me keep stock till now
Click to expand...
Click to collapse
Shure it will

Is any of our (unfortunately only) few developers handling P2 working/trying to look for a method of rooting without unlocking bootloader?

spawnn617 said:
Is any of our (unfortunately only) few developers handling P2 working/trying to look for a method of rooting without unlocking bootloader?
Click to expand...
Click to collapse
Try Kingroot.

Do we need to unlock the bootloader and wait for 14 days to apply this root method ?
Please add it to this guide if so.
Thanks.
EDIT :
Your device needs to be unlocked by OEM.
Your device must have TWRP installed.
I didn't see it when I read the post for the first time. So we do have to wait 14 days before flashing TWRP.

ROOT LOADING INSTRUCTIONS
Click to expand...
Click to collapse
I simply flashed superuser-r259_OneTeam.zip, install phh's SuperUser and got root without Magisk.

@EypCnn
Sorry for reply on a months-old thread but, has anyone firgured out how to root and install custom roms without unlocking Bootloader? I got a Chinese unit and not having a Chinese number is huge roadblock for me. :/

Is it necessary to flash both supersu and magisk for rooting device?? Will the device get rooted if i flash only Supersu?

There is not a lot of Updates released by Lenovo for this model, so if it breaks the OTA, just download from here

bl00dsoaked said:
@EypCnn
Sorry for reply on a months-old thread but, has anyone firgured out how to root and install custom roms without unlocking Bootloader? I got a Chinese unit and not having a Chinese number is huge roadblock for me. :/
Click to expand...
Click to collapse
Without unlocking bootloader you cant do anything
Sent from my Lenovo P2 using XDA Labs

Will this method work with the S244 Nougat build?
I have a P2c72 model hardware which I bought from China, but it came loaded with P2a42 firmware which updated itself to Nougat S244 via OTA updates. I'm not sure how to root it and I'm currently in the 14 waiting period to unlock the bootloader!

EypCnn said:
EXPLANATION
Hello friends, I will tell you how to get a Root without bootlooping Lenovo P2 device. Looking at other methods, you can get root without any problem if it is a little longer.
FOOTNOTE
Remember to take a backup of your device in case of any problems.
My, OneTeam and XDA are not Responsible for Possible Problems.
Your device needs to be unlocked by OEM.
Your device must have TWRP installed.
ROOT LOADING INSTRUCTIONS
First of all download all the Files Needed from Below.
When the download is completed, all files are discarded.
Install Magisk Manager Application from the link below.
Install PhH's SuperUser Application when installation is finished.
Once the installation is done, start your device in TWRP mode.
Then load the zip files you downloaded from below.
Install Install / Magisk-v11.1_OneTeam.zip.
When the installation is complete, install the Install / SuperUser- R259_OneTeam.zip file.
Restart the device when installation is complete.
Your device will be root when your device is restarted.
DOWNLOAD LINK
Magisk Mana​​​​​​ger​​​​
phh's SuperUser
Magisk-v11.1_OneTeam.zip
superuser-r259_OneTeam.zip
Credit
@wzedlare
@kaankulahli
@DeftonesOT
Click to expand...
Click to collapse
Why upload zips with your name and not a link to the original developer.
View attachment 4312159
Sent from my Lenovo P2a42 using Tapatalk

Can I root my Honor 6x

Can I root my honor 6x with kingroot after my bootloader unlocked....
Or I have to do it with TWRP only
I have Indian version of Honor 6x

A video Guide maybe?
Rommco05 said:
Yes you can, in my opinion is better make root via twrp and Supersu or Magisk (I have always rooted phone with Supersu)
Click to expand...
Click to collapse
Is there any video post about Rooting for Android Nogut of Honor 6x ???

sitaramrockzz said:
Is there any video post about Rooting for Android Nogut of Honor 6x ???
Click to expand...
Click to collapse
I haven't found any video tutorials online about rooting the honor 6x, but the way I did it was:
1. Download SuperSU 2.82.
2. Find where the zip file is located on your device.
3. Go into custom recovery by first SHUTTING OFF your device, then holding the power and up button until the screen turns on.
4. Flashing the zip file.
Hope this helps!

Root frd L02

Hello all the respected guides and developers, i am Naresh from Rajasthan, India. I have honor 8 FRD L02, and tried many times for root my device but something went wrong.. I think i dont have correct files for that.. So please provide me all usefull files and correct method for successfully root my FRD L02.

First of all u have to unlock bootloader
Then download and flash twrp recovery.
Then u can go two ways. Either download and flash supersu to root or download and flash magisk module and after that supersu..
Installing magisk is better i think as it gives users additional usability..
I have currently magisk 14.0 installed with supersu and everythong works flawlessly on my FRD L02.

I rooted my phone last night. But i installed only supersu v2.83...
What is magisk? And can i install it now or what the special benifit of magisk.?

As you know that FRD L02 is a single sim phone, only slot 1 is supporting. Can we modified or install something customized for use 2nd slot..? Can we make it dual sim support?

Laddu_ss said:
As you know that FRD L02 is a single sim phone, only slot 1 is supporting. Can we modified or install something customized for use 2nd slot..? Can we make it dual sim support?
Click to expand...
Click to collapse
Unfortunately you can't

Magisk is a root utility which enable you to hide your root access for certain applications, you can root with SuperSU or Magisk , but you need to uninstall your current root in order to re-root with Magisk.
But I think I read that Root Hiding function is not yet stable on Honor 8, read everything before installing it
Envoyé de mon FRD-L09 en utilisant Tapatalk