Database Info

[ROM][GT-I9305][Marshmallow][6.0][Cyanogenmod 13.0][UNOFFICIAL]

Disclaimer (partially borrowed from MIT license) - WARNING:
THIS SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND. If you loose your data, brick your device, any other damage or anything else happens (e.g. your cat eats your dog), it is YOUR PROBLEM and YOUR RESPONSIBILITY. Your device warranty is most probably void after installing this.
Although my original intention was just to help with porting CM 13 to i9305, I ended up with my build
To avoid any confusion a because I still have a felling that some people don`t understand this, I have to explain one more detail. I didn`t create this, I only built it. It is a big difference, similar to buying versus building a house. Buying a house is not a simple thing (at least in my country) and you`d probably need to do some changes and repairs before you can start living in it. But building a house is something completely different and much more difficult. The work I`ve done on this CM build is more like buying a house. The see the list of people who "built the house" go into Settings on your phone, section About phone and then Contributors. It is a really long list. Thanks to all of them
Also, please, keep in mind, that I am only sharing results of my hobby.
It is build mostly directly from CyanogenMod 13.0 sources. I only added support for i9305 and cm12 chroot for RIL support. See the original thread for some details. Anyway my work on this is really small, I fixed some problems a put all of this together.
You can download here:
cm-13.0-20160907-UNOFFICIAL-i9305.zip
There is also another builds from @evilracer123. (EDIT 31.3. 2016)
If you want you can also download unofficial build of TWRP with f2fs support TWRP-UNOFFICAIL-3.0.1.img
Changelog:
EDIT (17.1. 2016) - new build with bluetooth fixed
EDIT (19.1. 2016) - new build with bluetooth for non owner fixed, the code for this build downloaded yesterday
EDIT (22.1. 2016) - new build
EDIT (25.1. 2016) - new build - there is some bug in FileManager - see http://forum.xda-developers.com/showpost.php?p=64980000&postcount=150
EDIT (27.1. 2016) - new buld - FileManager bug fixed, Answer call with hardware HOME button commit included
EDIT (29.1. 2016) - new build
EDIT (1.2. 2016) - new build - attempt to fix bluetooth audio problem
EDIT (8.2. 2016) - new build - clock overflow fix (details)
EDIT (17.2. 2016) - new build - I added the SlimISP_PH.bin file, fixed the crashing gallery for non-owner (I added the INTERACT_ACROSS_USERS permission, I hope that it is a correct fix) and added rules for selinux denies @BMP007 reported for logcat.
EDIT (25.2. 2016) - new build with multiple RIL implementations, diff attached
EDIT (19.3. 2016) - new build, f2fs support (some hints here). I attached 2016-03-18_16-49-21-cm-13.0-20160318-UNOFFICIAL-i9305.tar.gz, which contains diff file, roomservice.xml and list of used commits.
EDIT (31.3. 2016) - new build
EDIT (18.4. 2016) - new build
EDIT (25.4. 2016) - new build
EDIT (20.5. 2016) - new build
EDIT (23.6. 2016) - new build
EDIT (7.9. 2016) - new build
EDIT (10.4. 2016) - new build, compiled with ArchiDriod optimizations (thanks to @JustArchi), fixed mDNIe settings
This ROM supports F2FS - you can find some hints, how to use it here. (EDIT 31.3. 2016)
If you want world writable sdcard, set property persist.world_writable_sdcard to true (search the thread to see how) , but be aware that this is not standard behavior.
Multiple RIL implementation
In this ROM, there are more then one RIL implementations. None of them is perfect, but you can choose, which one of them works better for you. The first RIL implementation is the usual CM 12.1 based one (this is the default one), the second one is based on proprietary files extracted from stock 4.4.4 ROM downloaded from sammobile.com (I9305XXUFOB2_I9305PHNFOB2_I9305XXUFOA1_HOME.tar.md5), the third is based on proprietary files from TheMuppets, with one small change (see here for details). To switch between them open shell (over adb, or using the build in app, or whatever you like) and execute command ril. You will see something like this:
Code:
Select RIL implementation:
* 1 - CM 12.1 based
2 - Stock 4.4.4 based
3 - TheMuppets based
x - quit
?
Type 1,2,3 or x and hit enter. The requires root, so be sure it is enabled. After switching, reboot the phone. If you don`t want bother with this, don`t. The default one is, based on my experience, the best
If you want gapps, use http://opengapps.org/. As mentioned several times elsewhere flash it RIGHT AFTER the ROM. I tried the nano version and it works fine.
As far as I know all hardware and RIL is working without problems (even barometer is correctly detected).
Know BUGs:
- sometimes after boot RIL is not started correctly (http://forum.xda-developers.com/galaxy-s3/development-i9305/rom-t3252492/post64740417#post64740417) - data connection (and maybe something else) is not working. In that case turn on and of flight mode (or go somewhere without signal). I trying to fix this, but it is difficult.
- the led flash light used as a torch goes off together with the display (http://forum.xda-developers.com/galaxy-s3/development-i9305/rom-t3252492/post64699946#post64699946)(fixed http://review.cyanogenmod.org/#/c/132783/)
- I suppose there is still msm_hsic_host wakelock bug (https://jira.cyanogenmod.org/browse/CYAN-2266). Supposedly unplugging the charger with display on should prevent this. EDIT (13.2. 2016) Some people are reporting that is fixed. I didn`t anyting specific to fix it, so I am not sure. One possibility is that this was also caused by the clock bug.
- if you have non FAT partition on you sdcard, you get a message that sdcard is corrupted. I`ll try to fix this one, it should not be difficult and it is annoying for me.
- gallery app is crashing for non owner (EDIT 19.1. 2016) (EDIT 17.2. 2016)
- there a problem with bluetooth audio - it occasionally stops for few seconds may be fixed in the today`s build (EDIT 1.2. 2016)
- on the first boot (after /data wipe) the SIM may not be found. Reboot should fix this. (EDIT 31.3. 2016)
Selinux is enforcing. If you used some of my previous builds from the original thread and there is something broken, what worked before, this may be the reason. In that case output of dmesg | grep 'avc.*denied' from the moment the problem happens, is a big help to solve it.
Code related to this can be found here:
https://github.com/p-an/i9305-cm13-device
https://github.com/p-an/android_system_core/tree/cm-13.0
https://github.com/p-an/android_build/
and some smaller changes in attached diffs (part of attached tar.gz archives as code.diff since 2016-3-18)
Build instructions:
This is definitely not the only way how to build CM13 for i9305, but it is the procedure, which I, more or less, use.
First of all read (and understand) the original guide. My build process is modified version of it. The modification is necessary, because there is no official CM13 for i9305, so the breakfast command won`t work. It is replaced by creating .repo/local_manifests/roomservice.xml file. Another change is that proprietary file are part of my github repo, so you don`t have to connect the phone.
Followe the guide mentioned above till the repo command setup. The next step is to initialize the CyanogenMod source repository - use the cm-13.0 branch:
Code:
$ cd ~/android/system/
$ repo init -u https://github.com/CyanogenMod/android.git -b cm-13.0
Now before you do repo sync, you have to create the roomservice.xml file (note the actual command is old, download the latest .tar.gz archive attached to this post and extract roomservice.xml from it):
Code:
$ mkdir .repo/local_manifests
$ wget "http://forum.xda-developers.com/attachment.php?attachmentid=3657032&d=1456237857" -O .repo/local_manifests/roomservice.xml
Now is time for downloading the code (it takes some time):
Code:
$ repo sync
After this is done you will probably need to sync the code from my github with upstream. It may up to date, but i can`t guarantee it. First add the upstream repo:
Code:
$ cd ~/android/system/system/core/
$ git remote add upstream https://github.com/CyanogenMod/android_system_core.git
And now sync the code:
Code:
$ cd ~/android/system/system/core/
$ git checkout cm-13.0
$ git fetch upstream
$ git merge upstream/cm-13.0 -m 'sync with upstream'
The checkout is necessary to have cm-13.0 branch active. Following two commands download the code from upstream and merge it. They can be replaced with one pull command. Now apply patches. I usually attach them either to this post, or the post, where I announce something new (like a fix). The reason why I share some changes this way, is that I don`t wan`t to fork whole big repository because of a small change. In the latest (cm-13.0-20160217-UNOFFICIAL-i9305.diff) diff there is only one change bigger than one line - delete 5 lines (2 of them are comments). This is usually easy to change manually, if patch fails. You can use this https://groups.google.com/forum/#!topic/repo-discuss/43juvD1qGIQ to apply the patch (store the script into ~/bin/repo_patch and make executable).
Code:
$ cd ~/android/system/
$ repo_patch cm-13.0-20160217-UNOFFICIAL-i9305.diff
Now proceed to the Extract proprietary blobs step. The commands are the same, but you don`t have to connect the phone to the computer:
Code:
$ cd ~/android/system/device/samsung/i9305
$ ./extract-files.sh
Since you skipped the breakfast step, you should now return to the ~/android/system/ directory and setup the environment:
Code:
$ cd ~/android/system/
$ source build/envsetup.sh
Now setup the ccache, if you want. See Turn on caching to speed up build in the original guide.
Start the build:
Code:
$ brunch i9305
If you find some problem let me know, I can try to fix it. But I can`t promise anything, this is only hobby for me and my original intention was just to help with porting CM 13 to i9305.
pAn

reserved

The bug whit the flashlight is on every CM12.1 rom.
2 min using the flashlight and the phone automaticly booting (bootloop).
Is there a chance the problem whit the sdcard to be permision problem?
Thanks i was start thinking that no one want we to have a marshmallow rom for our devices. Live long and prospect.

Sectorian said:
The bug whit the flashlight is on every CM12.1 rom.
2 min using the flashlight and the phone automaticly booting (bootloop).
Click to expand...
Click to collapse
This is new for me. I`ve probably newer used it for such a long time. I`ll put on my list
Sectorian said:
Is there a chance the problem whit the sdcard to be permision problem?
Click to expand...
Click to collapse
I don`t think so. I suppose that this is because there is ext2 partition (with Debian chroot) and Android has never designed to use sdcard with something like this. Until this version it was simply ignored. It is not a big problem, just annoying message.

Nvm sry for asking

russia101 said:
Are there some more changes then the build you already posted on the other thread ?
Click to expand...
Click to collapse
You quote entire OP and you can't read it ?
Please ...

russia101 said:
Are there some more changes then the build you already posted on the other thread ?
Click to expand...
Click to collapse
Edit your post please. No need to quote entire OP

@p.a.n gongrats for your first and the new thread with your rom and many thanks for uploading your sources.
But I am wondering, why you haven't pushed the changes in build and smdk-common, which are present in your posted diff file? Are they not needed (anymore?). And still not clear is, where to put mount_chroot.sh? In system/bin or cm12chroot/system/bin?

ok ... I tried it with usual cyanogenmod smdk-common cm-13.0 branch and original cyanogenmod build and without mount-croot.sh and: sim card and ril is working. But I still cannot hear something or anybody during a call . What vendor/samsung repo are you using? themuppets or crazyweazel and which branch? Maybe there is the problem located?

rodman01 said:
ok ... I tried it with usual cyanogenmod smdk-common cm-13.0 branch and original cyanogenmod build and without mount-croot.sh and: sim card and ril is working. But I still cannot hear something or anybody during a call . What vendor/samsung repo are you using? themuppets or crazyweazel and which branch? Maybe there is the problem located?
Click to expand...
Click to collapse
All the my changes from smdk-common are either in upstream (e.g. the incomminmg call fix) or I moved them to i9305. Script mount-croot.sh is not necessary anymore, the mounts are handled by init (init.target.rc). The only changes from the diffs which are not in those two repositories were in kernel and they are not necessary. The proprietary files which I am using are in the repo (https://github.com/p-an/i9305-cm13-device/tree/cm-13.0/proprietary, https://github.com/p-an/i9305-cm13-device/blob/cm-13.0/cm12chroot/cm12chroot.tgz), I don`t remember where I have it from Just execute extract-files.sh in device/samsung/i9305.
I really have no idea what could be wrong in your case You problems with audio or is it the still the problem with incoming calls (the phone doesn`t ring when someone calls)?

p.a.n. great work brother, installed this ROM with this Gapps (https://www.androidfilehost.com/?fid=24269982086993883) with my outdata Philz Touch 6.48 and works pretty damm good! GPS and wifi OK, incoming and outcoming calls smooth. Congratz!!!

Im expirience a slow charging whit your Rom whit agni kernel. Before that i was on Acip10 whit the same version of agni kernel and the charging work corectly. Hope im helpes.
Oher bugs: trebuchet crashing, skype is not working.

@p.a.n thanks for your all you've done,the rom works great for me,ril data 3g and lte works fine,many thanks ......

@rodman01 just and idea, you`ve probably tried it - do you have data connection, when you try the call? The bug which requires airplane mode on/off effects more than only data connection - if it happens also Llama doesn`t correctly detect area based on cell id. So it could be the reason for your problems.

Sectorian said:
Im expirience a slow charging whit your Rom whit agni kernel. Before that i was on Acip10 whit the same version of agni kernel and the charging work corectly. Hope im helpes.
Click to expand...
Click to collapse
What about cpu load, wakelocks? Did you check it?
Sectorian said:
Oher bugs: trebuchet crashing, skype is not working.
Click to expand...
Click to collapse
Could you provide some details - how to replicate it, logcat, etc. ? Trebuchet seems to be stable to me, but I using mostly another launcher. I don`t use skype, so I am afraid I can`t help with that one

Many thanks for the the tip, I will look at it and make some tests. Sim and ril is working, incoming and outgoing calls too...but no call audio, so I cannot hear the caller and he doesn't hear me neither.

rodman01 said:
Many thanks for the the tip, I will look at it and make some tests. Sim and ril is working, incoming and outgoing calls too...but no call audio, so I cannot hear the caller and he doesn't hear me neither.
Click to expand...
Click to collapse
Can you talk on a headset via the 3.5mm jack? If you can then it's related to RIL or the microphone and earpiece don't work in call.

Thanks for the awesome rom! Do I need to flash anything to get root?

floopyb said:
Thanks for the awesome rom! Do I need to flash anything to get root?
Click to expand...
Click to collapse
No, just enable the developer options, it is there

Sectorian said:
Im expirience a slow charging whit your Rom whit agni kernel. Before that i was on Acip10 whit the same version of agni kernel and the charging work corectly.
Click to expand...
Click to collapse
In AGNi control set 'Ignore unstable charging power', 'ignore safety margin', 'AC charge rate 1500mA'.
You won't damage anything, not phone nor charger.
There is a free app called Galaxy Charging Current which shows you the charging rate.
If you're too scared, just do the ignore unstable power and that will cure your issue. The other two things just make it charge even quicker.

[ROM][CM13] Cyanogenmod 13 for Samsung Galaxy SL i9003

hi,
this is my attempt to bring Cyanogen 13 to the Samsung Galaxy SL ( i9003 ).
So far i got the kernel/device/vendor repos synced and edited.
I still haven't manage to pass the "brunch galaxysl" command
first error was:
hardware/ti/wlan/mac80211/wpa_supplicant_lib/Android.mk:19: external/wpa_supplicant_8_ti/wpa_supplicant/android.config: No such file or directory
fixed by editing BoardConfing.mk ( not sure it will allow the wi-fi to work after this )
last error is :
make: *** No rule to make target '/home/nots/cm13/out/target/product/galaxysl/utilities/flash_image', needed by '/home/nots/cm13/out/target/product/galaxysl/bootstrap.cpio.gz'. Stop.
If anyone want to help, you are more than welcome
thanks to dhiru1602 and rodero95 for there previous work on this phone

mkdir out/target/product/galaxysl/utilities
copy busybox erase_image flash_image make_ext4fs to the dir created
busybox erase_image flash_image make_ext4fs are from ROM pack

notsgnik said:
hi,
this is my attempt to bring Cyanogen 13 to the Samsung Galaxy SL ( i9003 ).
So far i got the kernel/device/vendor repos synced and edited.
I still haven't manage to pass the "brunch galaxysl" command
first error was:
hardware/ti/wlan/mac80211/wpa_supplicant_lib/Android.mk:19: external/wpa_supplicant_8_ti/wpa_supplicant/android.config: No such file or directory
fixed by editing BoardConfing.mk ( not sure it will allow the wi-fi to work after this )
last error is :
make: *** No rule to make target '/home/nots/cm13/out/target/product/galaxysl/utilities/flash_image', needed by '/home/nots/cm13/out/target/product/galaxysl/bootstrap.cpio.gz'. Stop.
If anyone want to help, you are more than welcome
thanks to dhiru1602 and rodero95 for there previous work on this phone
Click to expand...
Click to collapse
Yeah I've actually followed quite some hack arounds for the device...... You'll need patches for the following repos (Unfortunately no longer in Nameless Gerrit. I'll try to upload them):
device/samsung/galaxysl
kernel/samsung/latona
hardware/ti/omap3
hardware/samsung
frameworks/av
bionic
I guess that's all that I've patched. And one more word of advice: CyanogenMod dropped support for the S2 so it'll never compile for the SL. It's better to download NamelessROM's source (check repo's --reference flag to speed up the download) because it has some support.
Cheers!
Technohacker

Technohacker1995 said:
Yeah I've actually followed quite some hack arounds for the device...... You'll need patches for the following repos (Unfortunately no longer in Nameless Gerrit. I'll try to upload them):
device/samsung/galaxysl
kernel/samsung/latona
hardware/ti/omap3
hardware/samsung
frameworks/av
bionic
I guess that's all that I've patched. And one more word of advice: CyanogenMod dropped support for the S2 so it'll never compile for the SL. It's better to download NamelessROM's source (check repo's --reference flag to speed up the download) because it has some support.
Cheers!
Technohacker
Click to expand...
Click to collapse
plz give us link for download and install rom

mehran200067 said:
plz give us link for download and install rom
Click to expand...
Click to collapse
For which version? I've compiled 5.0 (here: http://forum.xda-developers.com/gal...ake-android-5-0-lollipop-i9003-t2928989/page6 I've posted some fixes in subsequent posts so read all of 'em), 5.1's not available (doesn't boot...... idk why) whereas we're trying to port 6
Cheers!
Technohacker

Porting Lineage-14.1 to SM-G925F

As far as I know there is no official support on the LineageOS github for the zerolte model and that's when I decided that I'd like to change that.
I created my own device tree, but there are still some important directories and files missing to get passed the brunch command for zerolte.
If any kind soul would be able to help me make the changes specific for this model I'd be so happy.
Here's the tree: https://github.com/Umeaboy/android_device_samsung_zerolte

OK, here's the first error when running brunch zerolte:
Checking build tools versions...
build/core/binary.mk:1253: external/deqp/Android.mk: libdeqp: Unused source files: \
build/core/binary.mk:1253: external/deqp/Android.mk: libdeqp: Unused source files: \
build/core/binary.mk:1253: external/pdfium/third_party/pdfiumbigint.mk: libpdfiumbigint: Unused source files: bigint/BigInteger.cc bigint/BigIntegerUtils.cc bigint/BigUnsigned.cc bigint/BigUnsignedInABase.cc
build/core/binary.mk:1253: external/pdfium/third_party/pdfiumbigint.mk: libpdfiumbigint: Unused source files: bigint/BigInteger.cc bigint/BigIntegerUtils.cc bigint/BigUnsigned.cc bigint/BigUnsignedInABase.cc
./external/speex/Android.mk:56: TODOArm64: enable neon in libspeex
build/core/package_internal.mk:143: Empty argument supplied to find-subdir-assets
find: ‘/home/kristoffer/android/lineage/out/target/common/obj/SHARED_LIBRARIES/libwifi-hal-mock_intermediates’: File or directory does not exist
build/core/package_internal.mk:143: Empty argument supplied to find-subdir-assets
build/core/base_rules.mk:183: *** hardware/samsung/audio: MODULE.TARGET.SHARED_LIBRARIES.audio.primary.universal7420 already defined by device/samsung/zerolte/audio.
build/core/ninja.mk:166: receipt for target ”/home/kristoffer/android/lineage/out/build-lineage_zerolte.ninja” failed
make: *** [/home/kristoffer/android/lineage/out/build-lineage_zerolte.ninja] Error 1
make: Leaving directory ”/home/kristoffer/android/lineage”
Is there's a repo missing in my manifest to get the files that are missing? When I google I can't seem to find which one.

Here's my local_manifest.

In fact there is a lineage os 14 build for s6 edge

alex.X said:
In fact there is a lineage os 14 build for s6 edge
Click to expand...
Click to collapse
Yes, but not one that works beyond the Setup guide.
Tried the Nexus zip already.

There is in fact even though it has quite a few bugs

alex.X said:
There is in fact even though it has quite a few bugs
Click to expand...
Click to collapse
Please point me to it.
As I said...... I already tried the Nexus version.

it would be so great to have a Lineage rom for our S6 edge ! is this phone so rare that it is not supported?
Still fed up with TW, but in love with this sreen.

I found a custom version of Lineage for this phone, but I'd prefer to build a clean version so that more updates/fixes come more often.
Here's the file: https://nexus-roms.eu/files/testing/zero/ResurrectionRemix-zero-multitarget-2017-06-14_1948.zip
If you don't care about loosing everything on your phone here's how to erase everything on it:
In TWRP
Click on Wipe.
Then click on Advanced wipe.
Select the following partitions to wipe:
Dalvik / ART Cache, System, Data, Internal Storage, Cache.
Now swipe to the right to wipe.
Go back one step and press Format data.
Type the word yes and press the blue button on the lower right corner that has a check mark in it.
Now, go back to main menu.
If you have downloaded the above mentioned zip file to your desktop and you have adb working on your local computer, connect the phone with a cable and type in the terminal:
Code:
adb devices
Once you've confirmed that the phone is recognized, do this command:
Code:
cd Desktop
adb push ResurrectionRemix-zero-multitarget-2017-06-14_1948.zip /sdcard/
It will take some time so grab a coffee or play with the cat.
Done?
Good!
Click Install.
Go all the way down to the bottom of that directory and click on the zip file and let it install.
Now just reboot the phone and wait until the boot is finished because the first boot will take a little while.

925I

Any news for release ???

On every lineage os rom I tried for g925f is the failure that, if I lock my phone with the powerbutton its impossible to turn it on again...I have to restart it. And also the sensitive buttons don't work

Billabomb75 said:
Any news for release ???
Click to expand...
Click to collapse
Well, there won't be one unless you're willing to help working on it.
Make a manifest that's as close as possible to Lineage stock and I'll add it to the repo and do a test build.
There aren't any repos for zerolte for Lineage as noone has added support for it.

Umeaboy said:
Well, there won't be one unless you're willing to help working on it.
Make a manifest that's as close as possible to Lineage stock and I'll add it to the repo and do a test build.
There aren't any repos for zerolte for Lineage as noone has added support for it.
Click to expand...
Click to collapse
Well I dont know how to work on android manifests

Billabomb75 said:
Well I dont know how to work on android manifests
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2329228 should help you learn how to do it.
I can't do ALL the work by myself you know.

Umeaboy said:
https://forum.xda-developers.com/showthread.php?t=2329228 should help you learn how to do it.
I can't do ALL the work by myself you know.
Click to expand...
Click to collapse
tnx m8 will look at

alex.X said:
In fact there is a lineage os 14 build for s6 edge
Click to expand...
Click to collapse
None of Lineage OS works on Galaxy S6 , i downloades 4 ROMs , none working. I had hope for one but when i turn screen of it doesnt come back

Its good to see Lineage is working on this.....waiting for a quick stable version from the team.
Very Thanks in advance.

[UNOFFICIAL][G920/5F][7.1.2] LineageOS 14.1 Stable Version
https://forum.xda-developers.com/galaxy-s6/orig-development/rom-lineageos-14-1-t3598775

Lol, TeamNexus always release a multitarget build here and for multitarget I mean 920/5 F/I/T/W8. You can build 925 if you want, I always build mine since my device is not supported (925S)

Wileyfox Spark X (Porridgek3) Lineage 13.0 Unofficial

I am not responsible for bricked devices or anything
Unfortunately there is no official forum for the Spark X, so I thought I'd post this here if anyone needs it.
It's on security patch level 1 July 2018 so a worthwhile update if you're still on CyanogenOS.
Download: https://androidfilehost.com/?fid=1322778262903989315
Kernel sources: https://github.com/lineageos/android_kernel_cyanogen_mt6735
LineageOS Source code: https://github.com/lineageos/
Device tree: https://github.com/lineageos/android_device_wileyfox_porridgek3/

Does it have something to do with this one : rootmygalaxy .net /download-and-install-lineage-os-13-on-wileyfox-spark-x/ ?

h30x said:
Does it have something to do with this one : rootmygalaxy .net /download-and-install-lineage-os-13-on-wileyfox-spark-x/ ?
Click to expand...
Click to collapse
I didn't make that post on 'rootmygalaxy'. I did, however, make the builds.
It seems someone posted a link to my builds from their website.
That's fine though people can do what they want with my builds

I downloaded the [last version](https://eu.dl.twrp.me/porridgek3/twrp-3.2.3-0-porridgek3.img.html) of TWRP from their website but could not succeed in flashing it. OEM is unlocked, and no error message when flashing the recovery. So I can not try your build (neither try to build one myself).

h30x said:
I downloaded the [last version](https://eu.dl.twrp.me/porridgek3/twrp-3.2.3-0-porridgek3.img.html) of TWRP from their website but could not succeed in flashing it. OEM is unlocked, and no error message when flashing the recovery. So I can not try your build (neither try to build one myself).
Click to expand...
Click to collapse
Not sure how to help you there.
If you want to give a shot at building it, follow this guide, but replace 'crackling' with 'porridgek3' in all the commands and when it says
'repo init -u https://github.com/LineageOS/android.git -b lineage-16.0'
instead do
'repo init -u https://github.com/LineageOS/android.git -b cm-13.0'

Did you build the kernel boot image for MT6735?
You gave the link of the source you used https://github.com/lineageos/android_kernel_cyanogen_mt6735 but I do not know how to go from there to the kernel boot image.
If you did, it would be very nice to post it as well

[ROM] Unofficial LineageOS 16.0 PQ3A.190801.002] for ZTE Blade S6 (P839F30)

Code:
[I]DISCLAIMER[/I]
[COLOR="red"]Do not mirror my builds![/COLOR] Please post a link to this thread instead.
All information and files — both in source and compiled form — are provided on an as is basis.
No guarantees or warranties are given or implied. The user assumes all risks of any damages
that may occur, including but not limited to loss of data, damages to hardware, or loss of
business profits. Please use at your own risk. Note that unless explicitly allowed by the
warranty covering your device, it should be assumed that any warranty accompanying your
device will be voided if you tamper with either the system software or the hardware.
Introduction
This is my unofficial build of LineageOS 16.0 for the ZTE Blade S6 aka P839f30.
This is the first alpha release, so be aware that issues could arise.
I have tested this version with my AS variant device. Other variants have to be tested.
Click to expand...
Click to collapse
Features
working:
phone: calls, sms, data.
wifi
bluetooth
sensors
gps: mostly I have used the energy saving mode
sound
camera: rear with flash and front.
torch
headphone detection
swap back and menu button
light: button backlight, brightness control and adaptive brightness, breath light (notification and/or battery)
not working:
SELinux is permissive.
We have to test to find out.
Click to expand...
Click to collapse
Installation instructions
It is best to have installed the latest stock rom beforehand, so modem and all other vendor stuff is up to date.
If you like you can use this mod to have a unified data partition, please proceed with caution.
You will need TWRP or any other custom recovery.
Reboot into recovery and do a nand backup.
Do a factory format.
Download Rom and put it on your phone or use adb sideload.
Install the rom and then clear cache and dalvik cache.
optional: install su and/or gapps (preferable pico).
Click to expand...
Click to collapse
Changelog:
25.05.2021 - new release:
los security patch level 05.05.2021
revert some kernel changes from the last release
add some cpu governors and cpu hotplug
now with Boeffla WakeLock Blocker and other things
wireguard kernel support
22.12.2019 - 1st beta release:
los security patch level 05.12.
kernel supports EU device variant
add autosmp hotplug
add cpu governors blu_active, darkness, lionfish and relaxed
Revert CwMcu sensor driver from SU6 kernel release
24.10.2019 - 2nd alpha release:
los security patch level 05.10.
CwMcu sensor driver from SU6 kernel release, with wake lock disabled
wifi mac is loaded anyway, remove the loading in the wifi driver
give bluetooth a null mac address, to overcome force close error
kang gps from oppo
04.10.2019 - 1st alpha release:
los security patch level 05.09.
initial release of pie
Click to expand...
Click to collapse
Downloads
new release - 25.05.2021:
Google Drive.
first beta release - 22.12.2019:
Google Drive or here.
second alpha release - 24.10.2019:
Google Drive or here.
first alpha release - 04.10.2019:
Google Drive or here.
If you want root use the lineage addon package found here - download arm version.
Install it after flashing the rom or download your favourite root package and install it.
Click to expand...
Click to collapse
Sources
device
msm8916-common
vendor
kernel
Click to expand...
Click to collapse
FAQ
Here you will find some answers to common question which could arise.
Q: How to give root access to an app or adb?
A: First install the su extra package from Lineage OS or any other su tool you like. Then go into settings and about device, click there multiple times on the build number until you unlocked the developer options. Go to developer options and look for root access.
Q: I thing I found an issue, what to do now?
A: Do a logcat or grab a dmesg while having the issue, otherwise we can't say what is happening. Report as much info as possible. Quote your stock rom your device shipped with or which device variant you possess.
Click to expand...
Click to collapse
Thanks To/Credits
Code:
*aquaris-dev team
*aymende7
*PacMM79
*LineageOS team
*many others
XDA:DevDB Information
Unofficial LineageOS 16.0 [PQ3A.190801.002] P839F30, ROM for the ZTE Blade S6
Contributors
lightwars
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
Based On: LineageOS 16.0
Version Information
Status: Beta
Current Beta Version: 20191213
Beta Release Date: 2019-12-22
Created 2019-10-04
Last Updated 2019-12-22

many thanks for the new version, i will tested later :good: :highfive:
Hello, works on my ZTE Blade S6 Plus (p839f50)
but only with a fixed updater-script
from Folder: lineage-16.0-20191002-UNOFFICIAL-p839f30.zip\META-INF\com\google\android
the bold text must delete and than save the file
after the start my phone , i have a error message with bluetooth is deactivated
updater-script - original
https://filehorst.de/d/crqjwnjI
updater-script - fixed
https://filehorst.de/d/cbmctorj

new update is in the op.
just small changes and updated security patch level.

Anybody tested with EU device?
... at the moment no time to test myself (to much effort to keep my other devices up-to-date ), just wanted to ask if anybody already tested on EU device (and forgot to post ).
Gtz
Kurt

Kurt Krummbein said:
... at the moment no time to test myself (to much effort to keep my other devices up-to-date ), just wanted to ask if anybody already tested on EU device (and forgot to post ).
Click to expand...
Click to collapse
Answer my own request, gave it a try, didn't boot, screen stayed black and device went into fastboot-mode ... restored my nandroid-backup of stock-EU-B15 .
Next time, i format system and just install rom without gapps and addon-su.
Gtz
Kurt

Kurt Krummbein said:
Answer my own request, gave it a try, didn't boot, screen stayed black and device went into fastboot-mode ... restored my nandroid-backup of stock-EU-B15 .
Next time, i format system and just install rom without gapps and addon-su.
Gtz
Kurt
Click to expand...
Click to collapse
Hello Kurt,
please, if you find the time to do another test. Download the attached zip extract the boot.img and copy it to your device, flash it with twrp right after installing the lineage zip through twrp. report back if something different happens.
I splited the dtb from the zImage and attached the almost stock eu dtb, so maybe we are lucky. But I have not find any big differences in analyzing the dts of EU vs AS and kernel defconfigs EU vs AS.
I can show this files too, if somebody has a better understanding of this.

lightwars said:
Hello Kurt,
please, if you find the time to do another test. Download the attached zip extract the boot.img and copy it to your device, flash it with twrp right after installing the lineage zip through twrp. report back if something different happens.
I splited the dtb from the zImage and attached the almost stock eu dtb, so maybe we are lucky. But I have not find any big differences in analyzing the dts of EU vs AS and kernel defconfigs EU vs AS.
I can show this files too, if somebody has a better understanding of this.
Click to expand...
Click to collapse
Hi!
Well, i loaded the def's and config's into WinMerge and did a compare ... in the def's there are some different addresses, but i have now clue what the meaning of that all is :angel:. The config files look like beeing from different kernel versions, there are some options which don't exist in both, one is modularised, the other is not ... all in all quite strange.
Ok, i made a try with the boot_eu.img:
- Made a factory reset
- Flashed the LOS.zip
- Wiped caches
- unzipped the boot.img
- copied it to boot partition with dd if=boot_eu.img of=/dev/block/bootdevice/by-name/boot
- reboot
... screen goes black, one buzz .... nothing. One the PC the fastboot device appears and that's it. I was looking for tombstones, but couldn't find any ... they are stored to /data/tombstones, are they? I'm not sure, the kernel i getting up high enough to mount /data.
Cheers
Kurt
P.S.: one thing i forgot to mention ... i coulnd't find the "OEM unlock" swich in the stock system anywhere and the bootloader seems to be quite dumb, many commands from fastboot just end in a "command unknown", perhaps there's something left to do on my side (tweak in build.prop etc ... googleed for it no result ).

Kurt Krummbein said:
Ok, i made a try with the boot_eu.img:
- Made a factory reset
- Flashed the LOS.zip
- Wiped caches
- unzipped the boot.img
- copied it to boot partition with dd if=boot_eu.img of=/dev/block/bootdevice/by-name/boot
- reboot
... screen goes black, one buzz .... nothing. One the PC the fastboot device appears and that's it. I was looking for tombstones, but couldn't find any ... they are stored to /data/tombstones, are they? I'm not sure, the kernel i getting up high enough to mount /data.
Click to expand...
Click to collapse
Thanks for testing. You used the reboot system button of twrp I guess. Have you tried to reboot by pressing the power button?
I can think of two things: There is some flag in the kernel source which is called download_mode. I have seen that some devices have different default values! At the moment the value is 0, devices like the ones from bq with msm8916/msm8939 used this too, but devices from oppo with msm8939 uses a value of 1 as default. We can try this one.
Or there is a mask, which defines the restart reason so to speak says the device which mode to boot to. Here we have some differences in the meaning of the bits, a different bit shifting is used.
I can not really think that one of these causes your device to boot into download mode, because the recovery uses the same kernel on both region variants...

lightwars said:
Thanks for testing. You used the reboot system button of twrp I guess. Have you tried to reboot by pressing the power button?
I'll give that one a try .
Hope my device is not "going over the Wupper" LOL (this one has to come somewhen ...)
Click to expand...
Click to collapse
Ok, tried it ... same result. Then did a (perhaps a bit wired) test, just restored boot from my nandroid-backup. With this, the white ZTE bootscreen comes up and after some seconds it reboots to twrp.
Perhaps the dumb-bootloader refuses to boot with AS keys ... otherwise it wouldn't boot recovery. Strange puzzle.
Cheers
Kurt

Kurt Krummbein said:
Ok, tried it ... same result. Then did a (perhaps a bit wired) test, just restored boot from my nandroid-backup. With this, the white ZTE bootscreen comes up and after some seconds it reboots to twrp.
Perhaps the dumb-bootloader refuses to boot with AS keys ... otherwise it wouldn't boot recovery. Strange puzzle.
Cheers
Kurt
Click to expand...
Click to collapse
It is okay to do some unusual testings. I was doing this sort of things also, back then.
I'm not sure I get you, when you write about AS keys. Do you mean the fingerprint in the build.prop? I think I used the ones from the eu version. Maybe they build in some kind of kernel version check inside the bootloader, but only for the eu and other versions.
The cause is, that android needs an advanced kernel, so we can not use the stock kernel to boot newer android version like nougat, oreo or pie.
Sorry, I can not be of much help here, because I do not have a device with eu or some other region version. But we can try do some changes, if you like to do some more testing and maybe get something like a log, last_kmseg or ramoops. We should look to activate some of them.

Hello @Kurt Krummbein,
if you find the time please post the info you get by issuing this commands in the adb shell or on your phone in a terminal:
Code:
su
cat /sys/zte_board_id/board_id
cat /proc/device-tree/model
cat /proc/device-tree/compatible
Do this on your rom or stock rom you are using a the moment. Thank you.
For reference mine output is this:
Code:
Blade-S6:/ # cat /sys/zte_board_id/board_id
wrbA
Blade-S6:/ # cat /proc/device-tree/model
Qualcomm Technologies, Inc. MSM 8939 MTP
Blade-S6:/ # cat /proc/device-tree/compatible
qcom,msm8939-mtp qcom,msm8939 qcom,mtp
It could be that the eu variant uses another device tree inside the kernel, because the bootloader request that, but we have only this model available.

lightwars said:
Hello @Kurt Krummbein,
if you find the time please post the info you get by issuing this commands in the adb shell or on your phone in a terminal:
Code:
su
cat /sys/zte_board_id/board_id
cat /proc/device-tree/model
cat /proc/device-tree/compatible
Do this on your rom or stock rom you are using a the moment. Thank you.
For reference mine output is this:
Code:
Blade-S6:/ # cat /sys/zte_board_id/board_id
wrbA
Blade-S6:/ # cat /proc/device-tree/model
Qualcomm Technologies, Inc. MSM 8939 MTP
Blade-S6:/ # cat /proc/device-tree/compatible
qcom,msm8939-mtp qcom,msm8939 qcom,mtp
It could be that the eu variant uses another device tree inside the kernel, because the bootloader request that, but we have only this model available.
Click to expand...
Click to collapse
Mine is:
cat /sys/zte_board_id/board_id
wrbA-EUROPE
cat: /proc/device-tree/model: No such file or directory
cat: /proc/device-tree/compatible: No such file or directory
ls /proc/device-tree
/proc/device-tree: No such file or directory
Attached my build.prop ... perhaps this sheds some light .
Thx
Kurt

Kurt Krummbein said:
Mine is:
cat /sys/zte_board_id/board_id
wrbA-EUROPE
cat: /proc/device-tree/model: No such file or directory
cat: /proc/device-tree/compatible: No such file or directory
ls /proc/device-tree
/proc/device-tree: No such file or directory
Attached my build.prop ... perhaps this sheds some light .
Thx
Kurt
Click to expand...
Click to collapse
Sorry for that, I forgot that the stock kernel did not expose the device tree.
But I think I remeber the info about the model is in the logcat after boot up...
Please try this ones in a terminal on the phone or via adb shell, they should work.
Code:
su
Blade-S6:/ # cat /sys/devices/soc0/hw_platform
MTP
Blade-S6:/ # cat /sys/devices/soc0/soc_id
239

lightwars said:
Sorry for that, I forgot that the stock kernel did not expose the device tree.
But I think I remeber the info about the model is in the logcat after boot up...
Please try this ones in a terminal on the phone or via adb shell, they should work.
Code:
su
Blade-S6:/ # cat /sys/devices/soc0/hw_platform
MTP
Blade-S6:/ # cat /sys/devices/soc0/soc_id
239
Click to expand...
Click to collapse
mine is:
cat /sys/devices/soc0/hw_platform
MTP
cat /sys/devices/soc0/soc_id
268
cat /sys/devices/soc0/image_version
10:LRX22G:eng.root.20150808.123811
Gtz
Kurt

Kurt Krummbein said:
mine is:
cat /sys/devices/soc0/hw_platform
MTP
cat /sys/devices/soc0/soc_id
268
cat /sys/devices/soc0/image_version
10:LRX22G:eng.root.20150808.123811
Gtz
Kurt
Click to expand...
Click to collapse
Fantastic! Here we have an explanation. Your device reports 268 as id which equals to msm8929 and I have a device with id 239 which is msm8939. The kernel only holds a device tree blob (dtb) for the id 239. I thought that the variant were very similar, so last time I used a dtb from the eu release but only for id 239. Attached I have added a dtb for id 268. Please test this rom with that boot image.
Again, just unpack the bootASEU.img and copy it to your device, flash it after installing the lineageos zip.
Please make a backup beforehand and report back, when you have time. Happy trying out.

lightwars said:
Fantastic! Here we have an explanation. Your device reports 268 as id which equals to msm8929 and I have a device with id 239 which is msm8939. The kernel only holds a device tree blob (dtb) for the id 239. I thought that the variant were very similar, so last time I used a dtb from the eu release but only for id 239. Attached I have added a dtb for id 268. Please test this rom with that boot image.
Again, just unpack the bootASEU.img and copy it to your device, flash it after installing the lineageos zip.
Please make a backup beforehand and report back, when you have time. Happy trying out.
Click to expand...
Click to collapse
One step ahead ! Phone is booting with the new boot.img ... but ends with a bootloop.
Highest was one boot with start of the setup-wizard, but after setting language to "Deutsch (Deutschland)" (and several "Bluetooth is not working" messages) it went around again. Couldn't get logs yet ... well see :
Cheers
Kurt

Kurt Krummbein said:
One step ahead ! Phone is booting with the new boot.img ... but ends with a bootloop.
Highest was one boot with start of the setup-wizard, but after setting language to "Deutsch (Deutschland)" (and several "Bluetooth is not working" messages) it went around again. Couldn't get logs yet ... well see :
Cheers
Kurt
Click to expand...
Click to collapse
Yeah! Would be best to build the dtb from source, rather than attaching just the right one to the kernel...
The bluetooth message can be made silent, by the way what build you are using? I think the first build has not the fix for the message. The build.prop should contain this line:
Code:
ro.boot.btmacaddr=00:00:00:00:00:00
and the message should not appear.
I hope there are not any preferences with could only be applied to msm8939 and not to msm8929.

@Kurt Krummbein
Here is my latest build or just grab the boot.img from the attachment. Which has a dtb for msm8929 build from source.
Maybe this will boot without any bootloop.

lightwars said:
@Kurt Krummbein
Here is my latest build or just grab the boot.img from the attachment. Which has a dtb for msm8929 build from source.
Maybe this will boot without any bootloop.
Click to expand...
Click to collapse
For which version is your latest build? the eu?
Thanks
BR Slawo

slawoko said:
For which version is your latest build? the eu?
Thanks
BR Slawo
Click to expand...
Click to collapse
AS and hopefully EU.