{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible for bricked devices, dead SD cards, explosions, nuclear wars, alarm applications getting failed
The idea is to take the best from all available kernels like boeffla,blu_spark,franco kernel,elemental x,sultan,arter97,zanezam
to have a single kernel rich of features but at the same time stable and fast.
I will add only those features which don't cause instability and really improve performance or battery life of our device.
Thanks to all the kernel developers for many ideas, references and features, special thanks to andip71 for providing kernel source code ,I have used his kernel as base for my project
Features: (BOEFFLA BASED)
BoefflaConfig App compatible Download Link
Compiled using uber toolchain 6.x
Governor: blu_active(thanks to eng.stk) ,lionfish,zzmove,elementalx,impulse,interactive,conservative,ondemand,powersave,performance
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Dash charging fully supported
The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
Additional schedulers: fiops, sio, sioplus, fifo, vr, tripndroid and zen
CPU overclocking oneplus3(1728 little - 2265 big cluster) - oneplus3t(2,1 GHz for little CPU / 2,4 GHz for big CPU)
No GPU overclocking, no CPU and GPU voltage interface
USB charge rate bumped up to 900 mA
CPU core profiles to restrict number of CPU cores being used (the OP3 does not hotplug based on load)
Boeffla-Sound engine: Headphone volume and speaker volume (only lowering volumes for speaker)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable per CPU cluster, input boost switch
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control (not yet fully compatible to msm8996, expect side effects)
Swipe2wake gestures
Swipe2sleep gestures
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Kernel logger (dmesg) configurable
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms available
Entropy values configurable
Hardware touch keys are locked as long as screen is in use (touched) for better usability
Swap supported
Various minor kernel tweaks
Doze mode configurable in Boeffla-Config
Full selinux strict support (switchable to permissive on demand)
Show speedbin information (PVS level) in Boeffla-Config app
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Integrated full busybox 1.24.2 (own compilation)
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Supporters List:
KaszasM
Click to expand...
Click to collapse
DOWNLOAD:
ANDROID FILE HOST LINK
Coming from custom kernel
Flash stock Los kernel first ANDROID FILE HOST LINK
Installation
1. Flash in recovery ( I suggest use the lastone from eng.stk https://forum.xda-developers.com/devdb/project/dl/?id=24478)
Credit
Credit
* LordBoeffla
* ZaneZam
* Ak
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* eng_stk
* Flar2
* Entropy512
* Faux
* bedalus
* FranciscoFranco
* moludo
* Lozo2010
*acuicultor
*Joe Maples
Source code
Source: Github
reserved
Awesome good to see. I'm going to ask the obvious question. Okay to use with nougat based lineage roms?
Gonna try this out and let you know how it goes! still using your unofficial AiCP rom! super smooth ?
Sent from my ONEPLUS A3000 using Tapatalk
Good Good! Another great developer! And especially when all the kernel developers do not support custom roms.
Looks very good. Can we also have gpu boost option like in elementalx kernel?
Thanks!
A question, does this kernel support sRGB mode?
JohnYang1997 said:
A question, does this kernel support sRGB mode?
Click to expand...
Click to collapse
yes
nadejo said:
Looks very good. Can we also have gpu boost option like in elementalx kernel?
Thanks!
Click to expand...
Click to collapse
I will look into
Tried Kernal with Unofficial RR.
Mobile Data/WIFI doesn't work?
EDIT: Ignore me. Think its a ROM error not Kernel.
Good !!!
Flashing over Tesla !
Will you be releasing a config app for this or should we just use kernel aduitor?
Works on RR official by the way, I'll advise of any issues.
All the best with this kernel. Hope its unleashes the hidden potential from within the OP3 T
Does this include the Safetynet bypass to allow android pay to work?
https://review.lineageos.org/#/c/156794/
djsubterrain said:
Will you be releasing a config app for this or should we just use kernel aduitor?
Works on RR official by the way, I'll advise of any issues.
Click to expand...
Click to collapse
actually I do not have time to develop a dedicated app
Flashed older build of unofficial rr with this kernal. Works beautifully thanks dev.
---------- Post added at 05:22 PM ---------- Previous post was at 05:22 PM ----------
djsubterrain said:
Will you be releasing a config app for this or should we just use kernel aduitor?
Works on RR official by the way, I'll advise of any issues.
Click to expand...
Click to collapse
Rr official already has a kernal lol
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
liver20 said:
Good !!!
Flashing over Tesla !
Click to expand...
Click to collapse
Tesla isn't a lineage based OS though.
A Sad Napkin said:
Rr official already has a kernal lol
Click to expand...
Click to collapse
EVERY rom has a kernel, what's your point? This is a custom kernel which will offer features that one doesn't.
@kenzolo Is this AK (AnyKernel) compatible?
djsubterrain said:
EVERY rom has a kernel, what's your point? This is a custom kernel which will offer features that one doesn't.
Click to expand...
Click to collapse
It has a custom kernal already. So flashing another custom kernal on top just sees like a waste and asking for problems.
I know every rom has a kernal from LOS but not custom.
no luck on your AiCP rom. was stuck in a bootloop for a couple of hours. fell asleep with it stuck there and woke up this morning to it still there. I wiped cache and dalvik cache then flashed kernel
edit: so I read the OP and it says something about 4.0 firmware. I never upgraded my phone to 4.0 firmware, stayed on 3.5.3 then I rooted my phone and flashed ROMS, I never had a problem with your unofficial rom, or any other rom. I flashed the provided Recovery image you mentioned in your thread and flashed the ROM. is this why I'm bootlooping? cause I haven't upgraded to the 4.0 firmware?
Sent from my ONEPLUS A3000 using Tapatalk
So this isn't for stock 4.0.2?
Thanks for this either way mate
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
arter97 kernel for Galaxy S5
/* Features */
Based on stock SM-G900F kernel source
Supports AOSP and Touchwiz
(There are no Android 4.4 KitKat support for both ROM types, only Android 5.0 Lollipop is supported)
Upgraded to the latest Linux
Compiled using latest ARM hard-float Linaro-toolchain with optimization options
Speed improvements
New CPU Governors
New I/O Schedulers
Color inverting by quadriple tapping on home button
/* Details */
Upgraded to the latest Linux 3.4.106
Kernel & ramdisk compression in LZO format
Kernel scheduler improvements
Full unaligned access enabled for AOSP ROMs
Improved memcpy, hrtimer, mutex, cpufreq, memory-management, writeback
Optimized RWSEM, crypto, math drivers
Wi-Fi wakelock reduced
BFQ v7r7, SIO, FIOPS(default), FIFO, VF, ZEN I/O Schedulers added
arteractive CPU Governor replacing interactive
Deadline I/O Scheduler speed improved
Asynchronous I/O speed improved
Asynchronous fsync from hTC ported by faux123
Dynamic fsync from faux123
Networking speed improvements
Disabled MMC-CRC for better speed
ARCH_POWER enabled for better power savings
Replaced MP-Decision with intelli_plug by faux123
Fauxsound from faux123
Random driver backported from Linux 3.19+
SCHED_AUTOGROUP enabled for best multitasking experience
Westwood as default TCP congestion control for best networking speed
i2c clock rates adjusted to 19.2 MHz for better battery life
Built with LTO(Link-Time-Optimizations) to provide optimum performance
Power-efficient workqueues from Linaro
Uses Samsung's sdcardfs replacing Google's FUSE daemon for better battery and performance
SELinux set to permissive
Compiler optimizations for Krait architecture
Fully ready for AOSP Android 5.0 Lollipop
Proper, full support for f2fs & backported from Linux 3.19+
Kernel-side trimming disabled for performance
Cryptographic drivers optimized for NEON
Entropy hook on storage removed for performance
Default file-system mount option with noatime & nodiratime
Power-efficient workqueues backported from linaro-lsk
Deep-discard-trim; FIDTRIM support for ext4
/* Disclaimer */
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this kernel
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
/* Supported device */
Galaxy S5 SK (SM-G900S, klteskt)
Galaxy S5 KT (SM-G900K, kltektt)
Galaxy S5 LG (SM-G900L, kltelgt)
Galaxy S5 International (SM-G900F, kltexx)
/* What you need to know - AOSP */
This kernel has a very different characteristics compared to other AOSP kernels,
this kernel is not based on CyanogenMod sources, thus it doesn't have all of those unstable CAF commits.
By basing on stock OSRC kernel releases, you can expect ultimate stability.
/* What you need to know - 2 */
'Opensource' does not mean 'no-respect'
Leave credits to original developers
/* FAQ */
What is arteractive CPU governor?
It is an interactive CPU governor port from newer source code. It has more optimizations for Snapdragon 80x processors.
Why are other CPU governors disabled?
I personally don't want any of my users to play around CPU governors. It'll start be a mess when I try to add support for other CPU governors.
Can I use stock mpdecision and stock thermal engine?
This one too, I'd like my users to stick with intelli-plug and intelli-thermal. Stock implementation is faulty, cores can lock down with stock mpdecision. As for intelli-thermal, the benchmarking score may reduce but will help for a lower temperature of the device and increase the efficiency of the thermal control.
How can I switch to another or stock kernel?
You may have to reinstall the entire ROM. Wipe /system and install the ROM. The included addon.d script helps the kernel to survive on nightly upgrades, but you need to remove it or wipe /system to switch to another kernel.
/* Thanks to */
faux123
Yank555.lu
temasek
MinL(xens0117)
hsk from Matcl
Kamui from Matcl
Codeaurora
Cyanogen
/* Contact */
Email : [email protected]
Twitter : @arter97_dev
/* Downloads */
http://arter97.com/msm8974_kernel.htm
Source code - https://bitbucket.org/arter97/android_kernel_samsung_msm8974
(Please consider donating if you appreciate my work. Thanks)
/* Installation */
1. Put the downloaded kernel on your internal storage
2. Enter ClockworkMod(or PhilZ) recovery
3. Flash kernel
XDA:DevDB Information
arter97 kernel for Galaxy S5, Kernel for the Samsung Galaxy S 5
Contributors
arter97, faux123, yank555
Source Code: https://bitbucket.org/arter97/android_kernel_samsung_msm8974
Kernel Special Features:
Version Information
Status: Testing
Created 2015-03-16
Last Updated 2015-03-16
/* Changelog */
5.0.1
Firmware partitions now mounted without SELinux context for Touchwiz
(Fixes some boot issues)
5.0
Kernel entirely rebased to latest Samsung Lollipop kernel sources
Initial support for Galaxy S5
Android 4.4 KitKat ROM support dropped
Reserved 2
Reserved 3
Reserved 4
Reserved 5
Support for Samsung S5 LTE-A X3 G906S/K/L
Please support our device, and btw thanks for you contributions in our cyanogemod build. thumbs up
arter97 said:
Reserved 5
Click to expand...
Click to collapse
hi Arter97, is this compatible for stok based custom roms like xtrestolite rom?
compatible with cm12 based roms ?
It's looking nice ?
Nice!! App control for kernel? And very tks.
Enviado desde mi SM-G900F mediante Tapatalk
---------- Post added at 01:02 PM ---------- Previous post was at 12:21 PM ----------
Faux control work fine.
Enviado desde mi SM-G900F mediante Tapatalk
5.0.1 is now live.
Hey @arter97! Sorry to bother you with this but, can you make a the kernel for G900H too? (when samsung publish the BOB8 or any 5.0 stock kernel source)
Can you make this kernel work on galaxy s5 korea version SM-G900L
thank youuuuuu
coto39 said:
Hey @arter97! Sorry to bother you with this but, can you make a the kernel for G900H too? (when samsung publish the BOB8 or any 5.0 stock kernel source)
Click to expand...
Click to collapse
Exynos is a no-go for me.
Sent from my GT-I9506 using XDA Free mobile app
lehongwang said:
Can you make this kernel work on galaxy s5 korea version SM-G900L
thank youuuuuu
Click to expand...
Click to collapse
It should work
Sent from my GT-I9506 using XDA Free mobile app
Thanks for the kernel. I flashed it in alliance v7. Looks good so far.. Do you believe that it would have better battery with this kernel vs the original? What do you think are the benefits vs the original?
Thanks,
Edit.. After all i have a problem.. Phone doesn't go to sleep mode..
sosimple said:
Thanks for the kernel. I flashed it in alliance v7. Looks good so far.. Do you believe that it would have better battery with this kernel vs the original? What do you think are the benefits vs the original?
Thanks,
Edit.. After all i have a problem.. Phone doesn't go to sleep mode..
Click to expand...
Click to collapse
+1
Also the freq 2475 MHz does not work.
bone069 said:
+1
Also the freq 2475 MHz does not work.
Click to expand...
Click to collapse
That too..
Anyone has bob7 kernel?
Running fine on cm12.
Will see how it holds out, massive fan of intelliplug! Keep up the good work!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Some Kernel Features-
Adreno idler and adreno boost are available, off by default
Mild undervolt for our cpu, reduces heat, helps battery backup
Removed cpuquiet
Added relaxed governor
Added NTFS Support
Added KCAL Support
Enable Arch Power
Enable ADRENO IDLER
INSTALLATION STEPS:
Download correct version of Overload kernel
Make backup of system, boot in twrp
Now, wipe dalvik cache and cache
Flash the kernel zip and reboot
Enjoy
DOWNLOAD LINKS:
EUI/MIUI
overloadmiui-v-2.5.zip
NOUGAT
overload-nougat-v-2.5.zip
Pie & Oreo
Download
Source code:Github
Credit:
sandymanu
kabirkalsi
neobuddy89
vireshk
franciscofranco
rishabhrao
savoca
jcadduono
Alexey71
dragonGR
Umang96
arter97
frap129
Meninblack007
codeworkx
Donate If You Like My Work:-
PayPal
XDA:DevDB Information
Overload Kernel, Kernel for the LeEco Le 2
Contributors
renjian
Kernel Special Features:
Version Information
Status: Stable
Created 2017-10-01
Last Updated 2019-02-18
Overload-v4.01
Nougat
https://www.androidfilehost.com/?fid=673956719939831188
Miui
https://www.androidfilehost.com/?fid=746010030569965456
changelog
removed KCAL
added boeffla wakelock drivers
kernel upstream 3.10.108
removed [PATCH] UKSM 0.1.2.3
old version
Overloadv3.9
https://www.androidfilehost.com/?fid=889964283620777983
changelog:
patch UKSM 0.1.2.3
Decrease Time to enter Sleep Extensively
Linux 3.10.108
Overload-v3.8
miui/eui
http://linkshrink.net/7Hy1k0
change log
Kernel upstream from 84 to 106
disable cpuquiet
Overloadv3.8
nougat:http://linkshrink.net/72JMoj
change log:
Kernel upstream from 84 to 106
Overload V3.7
Nougat
http://linkshrink.net/7YIplz
change log
Mild undervolt for our cpu and gpu
UPSTREAM: drivers/input
Added Relaxed governor
and many things
Overload v3.1
Nougat
https://www.androidfilehost.com/?fid=817906626617949332
changelog
Fixed hotplug
Without net hunter support
Recommended to use this 1
Overloadv2.5
Miui
https://www.androidfilehost.com/?fid=889964283620763279
Nougat
https://www.androidfilehost.com/?fid=889964283620763280
Changelog
enable all 8 cores during bootup
3.10.94 CAF tag
Implement zen-tune v4.5
zen-tune: Increase BLKDEV_MAX_RQ to 32
WiFi fixed for miui
added core control
Overload v2.3
Nougat
https://www.androidfilehost.com/?fid=673791459329052874
Miui
https://www.androidfilehost.com/?fid=673791459329052871
Change log:
Added darkness Governor
Off cpuquiet
Removed Kali nethunter support
Fixed audio
Added wq power efficient
Lowest GPU initial power to 3
Removed Frandom RNG driver
old update for nougat:
Overloadnougat_v2.1.zip
change log:
Added Support For Kali NetHunter
Added Maple I/O Scheduler
used Lowest GPU-Frequency as Initial Power Level
Touch-Boost Optional
Added frandom RNG driver
enable cpuquiet
Add NTFS Support
old build:
Overloadmiui_v2.1.zip
changelog:
Added Maple I/O Scheduler
used Lowest GPU-Frequency as Initial Power Level
Touch-Boost Optional
Added frandom RNG driver
Fix led for miui mm
enable cpuquiet
Add NTFS Support
SUPPORTED DEVICES:
LeEco Le 2 X520
LeEco Le 2 X526
LeEco Le 2 X527
LeEco Le S3 X522
Telegram Support:
Click here
To run all cores just use this setting in kernel auditor,
use any governor u want and in CPU Hotplug ->minimum cpus big->make online all 4 cores
Man the best kernel for leeco le 2 but why don't work led notification!thank you for kernel
Cabr said:
Man the best kernel for leeco le 2 but why don't work led notification!thank you for kernel
Click to expand...
Click to collapse
Firstly , Notification LED Never works is due to MiUi ROM
Stop Blaming US Kernel Developers
Man, what do cpuquiet, adreno idler and adreno boost mean? Sorry for that question, I'm just a noob.
cristianmaral said:
Man, what do cpuquiet, adreno idler and adreno boost mean? Sorry for that question, I'm just a noob.
Click to expand...
Click to collapse
Google it
bonsai.14 said:
Google it
Click to expand...
Click to collapse
Thank you a lot for that answer, it really helped!
Which one is better,illusion kernel or this one?
DarknessKiller said:
Stop Blaming US Kernel Developers
Click to expand...
Click to collapse
That can be misunderstood US in capital letters is usually United States (of America), I guess you meant us :good:
Ggenzy said:
Which one is better,illusion kernel or this one?
Click to expand...
Click to collapse
That depends, try both and take the one, that's better for you.
No one, except you, can tell you which one is better for you.
can i install this on 19s stock?
@DarknessKiller @renjian What changes were required on Le official source to get it working? How do you switch compiling for Nougat or EUI?
cjcool_123 said:
can i install this on 19s stock?
Click to expand...
Click to collapse
yup
I installed it on Los 13. Nothing negative to say at the moment.
Geekbench score remains the same. Overall performance is a bit smoother although. Battery a little better maybe.
It seems Open camera got much more stable... but this may change, already had this ok for some days with other kernels
FridrufHau said:
I installed it on Los 13. Nothing negative to say at the moment.
Geekbench score remains the same. Overall performance is a bit smoother although. Battery a little better maybe.
It seems Open camera got much more stable... but this may change, already had this ok for some days with other kernels
Click to expand...
Click to collapse
Can you please show the scores on geekbench 4 with LOS 13?
cristianmaral said:
Can you please show the scores on geekbench 4 with LOS 13?
Click to expand...
Click to collapse
It is 1397 single core and 3223 multicore.
Phone is unrooted.
Was at 3800 multicore on Los 14 roms, but always sleeping cores....
Omg!! got 6:30+ sot on nougat roms
FridrufHau said:
It is 1397 single core and 3223 multicore.
Phone is unrooted.
Was at 3800 multicore on Los 14 roms, but always sleeping cores....
Click to expand...
Click to collapse
For sleeping cores try changing the selinux to permissive and keep kernel auditor on background, it worked for me.
cristianmaral said:
For sleeping cores try changing the selinux to permissive and keep kernel auditor on background, it worked for me.
Click to expand...
Click to collapse
No sorry, want selinux strict and phone unrooted
cristianmaral said:
For sleeping cores try changing the selinux to permissive and keep kernel auditor on background, it worked for me.
Click to expand...
Click to collapse
U don't need do anything like that I will just attach the screen shots ....
Yash98 said:
@[email protected] What changes were required on Le official source to get it working? How do you switch compiling for Nougat or EUI?
Click to expand...
Click to collapse
I didn't use le 2 source ,using lineage kernel source
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INTRODUCTION
Code:
/*
* Your Warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead dogs, or cats,
* but i'm very interest in thermonuclear war, so if you point the finger
* at me for messing up your device just because this kernel, I will
* send you to the mars with Nuclear Rocket. Act accordingly.
* I know this paragraph is conspiracy-included, so
* dont ask about it. Welcome.
*/
Pepsy is a custom kernel that improves battery consumptions and performances. It's based on LineageOS's kernel to ensure the best stability. It has a lot of improvements made by various legendary XDA developers. I will ever prefer quality over quantity, so do not ask for useless features. And do not forget to drink a PEPSY!
FEATURES
Compatible with android 8.x
Upstream to latest 3.18.y kernel tag from kernel.org
Synced with latest changes from LineageOS
Synced with latest changes from CodeAuroraForum
Sio, Fiops, Fifo, SioPlus, Tripndroid, VR and Zen ioscheds
Impulse governor
Boeffla's Wakelock Blocker
LCD Notifier driver
Backlight Dimmer
Dynamic Sync Control 2.1
KCAL Post Processing Control v2
Adreno Boost
Adreno idler
WireGuard
USB fast charging up to 900 mA
Disabled CRC check
Swappiness 0
Bic, Cubic, Westwood, Hstcp, Hybla, Htcp, Vegas, Reno, Scalable, Lp, Yeah and Illinois advanced TCP
Disabled various logspam of various drivers
Optimized Interactive governor
Arch Power Energy Saving
Gentle Fair Sleepers
Reworked CPU boost
Reworked msm-thermal
Slab updates
Cfq-iosched upstreams
Optimized cpu-idle
OC: CPU | GPU MSM8996 (Standard frequencies for speedbin 1)
... and much more
Please refer to GitHub for a complete features list
DOWNLOAD
Latest Pepsy Kernel
Compatible with:
MI 5
MI 5s
MI 5s Plus
MI Mix
MI Note 2
INSTALLATION
First time install:
Reboot to TWRP recovery
Flash the kernel zip
Flash Magisk (optional)
Wipe cache and dalvik (optional)
Reboot
Updating the kernel:
Reboot to TWRP recovery
Flash the kernel zip
Wipe cache and dalvik (optional)
Reboot
Coming from another kernel:
Dirty flash your ROM or flash the boot.img only
Flash the kernel zip
Flash Magisk (optional)
Wipe cache and dalvik (optional)
Reboot
THANKS TO
Please refer to GitHub
Donate HERE if you want
XDA:DevDB Information
Pepsy Kernel, Kernel for the Xiaomi Mi Mix
Contributors
Psy_Man
Source Code: https://github.com/PsyMan47/Pepsy-Kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v0.8
Stable Release Date: 2018-08-04
Created 2018-02-12
Last Updated 2018-08-04
Thanks man, i try right now!
Thanks for your work, will try it when kernel had support non-MIUI ROMs.
Nice work! Does it support EpicRom? (based in miui 9 beta)
omerbagi10 said:
Nice work! Does it support EpicRom? (based in miui 9 beta)
Click to expand...
Click to collapse
Since Miui 9 is required and Epic rom is already based on Miui 9, so...
Big-Big Thanks.
This is only the second one custom kernel for Mi MIX miui.
Can you add UV patch from LOS version by @pappschlumpf?
Thanks a lot.
ed.jeremy said:
Big-Big Thanks.
This is only the second one custom kernel for Mi MIX miui.
Can you add UV patch from LOS version by @pappschlumpf?
Thanks a lot.
Click to expand...
Click to collapse
Sure he can, the patch is universal, should work on any 821 kernel. But it is questionable if it is making sense, because of i've not seen any device working stable with even the slightest UV.
Have you tried UV with my kernel already and got it working stable? My Mix always didn't return from sleep. I'm fairly sure the 821 is close to it's limits with stock voltages.
Gesendet von meinem SM-N950F mit Tapatalk
It is necessary to use the UV only for the most used frequency, not for the entire frequency range.
E.g. when you use fbreader or something like this, use UV only for 307Mhz. This requires fine-tuning for each case and tasks. So it works more or less.
nice to see you here from the redmi note 2 section
ed.jeremy said:
It is necessary to use the UV only for the most used frequency, not for the entire frequency range.
E.g. when you use fbreader or something like this, use UV only for 307Mhz. This requires fine-tuning for each case and tasks. So it works more or less.
Click to expand...
Click to collapse
Looks like your CPU is a good one. I've tried many combination for sure before releasing my kernel with OC/UV included. My CPU overclocked well, but UVed in such a small range that it made no sense to use it on my Mix. As it worked in general there wasn't a reason to release it anyway.
Gesendet von meinem SM-N950F mit Tapatalk
great..i will try it...but i can't flash magisk
Changelog:
- Synced with the latest Lineage's kernel sources
- Fixed video recording issue
- LOS/AOSP version is coming!
Psychedelic Kernel v0.3
Psy_Man said:
Changelog:
- Synced with the latest Lineage's kernel sources
- Fixed video recording issue
- LOS/AOSP version is coming!
Psychedelic Kernel v0.3
Click to expand...
Click to collapse
Can't enable wifi with this kernel?
Franssen said:
Can't enable wifi with this kernel?
Click to expand...
Click to collapse
Wifi is working properly.
Psy_Man said:
Wifi is working properly.
Click to expand...
Click to collapse
Not here on latest epic rom on my phone
Franssen said:
Not here on latest epic rom on my phone
Click to expand...
Click to collapse
Here on latest epic working
Hi, i try and in my phone the wifi neither work.
Latest epic pro, with dragonxia kernel 3.9.07 for MIUI.
Flash epic pro boot.img, flash this kernel, flash SuperSU, cache and dalvik wipe, reboot and wifi doesn't work, reboot some times and nothing, flash boot.img and works
Here a screen shot. Everything working
Hi. I think insisting that it works for you is not necessary and that brings little, I think that the first time you said it we believed, but, it seems that in certain circumstances and with certain variables at stake, the wifi does not work, so that the partner and I have commented (I indicating where I came from and what steps I have taken) to see what the problem may be so that everyone can enjoy this great contribution.
A greeting.
---------- Post added at 01:15 PM ---------- Previous post was at 12:57 PM ----------
Hi, i try a second time and the same occurs, i back to stock kernel again, disable kernel adiutor, try again and this time works.
I do not know if it will have to do with the kernel adiutor or coincidence
pokol said:
Hi. I think insisting that it works for you is not necessary and that brings little, I think that the first time you said it we believed, but, it seems that in certain circumstances and with certain variables at stake, the wifi does not work, so that the partner and I have commented (I indicating where I came from and what steps I have taken) to see what the problem may be so that everyone can enjoy this great contribution.
A greeting.
---------- Post added at 01:15 PM ---------- Previous post was at 12:57 PM ----------
Hi, i try a second time and the same occurs, i back to stock kernel again, disable kernel adiutor, try again and this time works.
I do not know if it will have to do with the kernel adiutor or coincidence
Click to expand...
Click to collapse
It is not related to kernel adiutor, as i am also using this app on my phone and everything is properly working! Have you wiped cache and dalvik?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void lmao.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
INTRODUCTION
Lolz Kernel makes your device even snappier than before. Being a battery happy and performance balanced kernel it never compromises on stability. You know why? Cause your device deserves it! Lolz Kernel main priority is efficiency and battery. More Fuel plus More Smoothness equals More Fun.
Supported Galaxy Note 3 Variants(codename):
* hlte/hltexx/hltespr
* hltechn
* hltekor/ktt/skt
*hltetmo
Supported Android Version:
* Android 9 (PIE)
* Android 10
* Android 11
* Android 12
Supported ROMs:
* All AOSP based ROMs
* All CAF Based ROMs
* All LineageOS Based ROMs
Major Features: (Current Lolz Stable Release)
* Splashloop Proof Since V9.0
* Compiled with LOLZ CLANG 15.0.0
* Systemwide WQ_POWER_EFFICIENT
- BACKPORT: WORKQUEUE From Linux 3.10
- BACKPORT: RCU From Linux 3.8
* BACKPORT: F2FS from Linux 4.12
* Custom CPU governors: Lolznappy, Elemental-X, Nightmare, Alucard, Intelliactive and zzmoove.
* Lolznappy CPU Governor as default.
(LOLZ Kernel own CPU Governor, Based on AOSP Interactive with lot Patches from Upstream and the Open Source Community, tweaked and Optimized for Balanced Usage)
* CPU Input Boost by sultanxda
* CPU Voltage Control
* MSM Limiter Added
* Fully Disabled MPdecision
* CPU Hotplug Drivers: LazyPlug, Mako Hotplug, Bricked/MSM Mpdecision and Blu_plug(Experimental)
* CPU Underclock and Overclock: 268MHz to 2496MHz (2265MHz is the default max frequency for Balanced Usage)
* GPU Underclock and Overclock: 100MHz to 600MHz (27MHz @ Idle)(450MHz max default for Balanced Usage)
* GPU: Adreno Idler
* Double tap 2 wake
* Boeffla Sound Control
* TCP Congestion: Westwood as default
* Screen: K-lapse v5.0 & KCAL
* Custom Schedulers: Fiops, Maple, Fifo, VR, SIOPlus, Tripndroid, ZEN
* FIOPS as default IO Scheduler
* USB/AC Fastcharge V1.3
* Underhood Optimizations, Code fixes and Tweaks
How to install?
* CLEAN KERNEL FLASH METHOD:
- Read Carefully!(you need to do this every time you flash this custom kernel)
1. Be sure you are not using any Custom Kernel.. If you are, then you need to dirty flash your ROM or just flash the stock boot.img of the ROM you are using.(You can get the boot.img of your ROM by Extracting the ROM.zip)
2. Goto TWRP then flash Magisk(Magisk zip first when you are on Android 9, If you are on Android 10 You need to flash Magisk after flashing Lolz kernel zip)(if you do not need root then skip this)
3. flash the Lolz kernel zip.
4. Reboot(just wait for it to boot)
5. Enjoy .
* DIRTY FLASH METHOD (For LAZY Users)
1. Reboot to TWRP Recovery ( I will assume that you have this Custom Recovery )
2. Flash Magisk Zip (Not needed if you have installed this on previous kernel already)
3. Flash the Lolz kernel zip
4. Reboot
5. Enjoy being dirty
Donations are very much appreciated..
Thanks for supporting Lolz kernel
My Donation link
NOTES:
* DO NOT USE ANY MODULE TWEAKS like NFS, Fde.AI etc... Only Module i can suggest is Lspeed Magisk Module.. but still don't Complain about bugs or anything if you use any automatic tweak modules.
* Recommended Tweaking App: SmartPack Kernel Manager (The Official Successor of Kernel Auditor)(Only Use Tweaking app if you really know what you are doing)
DOWNLOAD LINK: (Current LolZ Stable Release)
https://www.pling.com/p/1410846/
You want to be testers, ask questions or just want to talk to hlte users?... Join the fun now: (hlte TG group): https://telegram.me/galaxynote3_official
Kernel Source: Click here boi
Thanks to:
Linux Devs
AOSP Devs
Samsung Devs
and to all devs, contributors and testers out there...
XDA:DevDB Information
Lolz-Kernel, Kernel for the Samsung Galaxy Note 3
Contributors
jprimero15
Kernel Special Features: Smooth + Battery friendly
Version Information
Status: Stable
Created 2019-07-18
Last Updated 2022-02-07
***Rules for Feature requests***
1. I Can accept feature requests.
2. I Can ignore feature requests.
3. At least give me the commit's link of feature you want.
***Rules on reporting bugs***
1.Give logs.. (There are lot of tutorial here in xda on how to get logs)
2. Wait for it to boot maximum of 3minutes.. (If u did wiped /data/dalvik-cache it will take more time)
3. Which variant you have.. Hlte/chn/tmo/kor/spr?
4. What ROM, build date and other info about the rom you are using currently..
5. Be sure you followed the proper installing procedure.
6. If you want root then i recommend MAGISK.
7. Be sure you clear data all of your tweaking app first before installing example: kernel auditor, lspeed etc..
8. Say what Lolz version you are using (example: Lolz V9.1)
And plz try other version too...
9. Be sure that the problem is not ROM's fault..
10. Report all of this here.
Oof
Will test & update
Good to see a new thread for the Note 3.
Kernel is working great, many thanks @jprimero15
Good to see a new kernel
BTW your kernel have no fast charge i tried by copying script to init.d and gave the permission 755 and tried to excute it by kernel auditor and tried to enable fast charge in KA but no luck
ammar_maher said:
Good to see a new kernel
BTW your kernel have no fast charge i tried by copying script to init.d and gave the permission 755 and tried to excute it by kernel auditor and tried to enable fast charge in KA but no luck
Click to expand...
Click to collapse
Device with Lolz is charging at 1800mA here.
ammar_maher said:
Good to see a new kernel
BTW your kernel have no fast charge i tried by copying script to init.d and gave the permission 755 and tried to excute it by kernel auditor and tried to enable fast charge in KA but no luck
Click to expand...
Click to collapse
The kernel have fast charge..if not working then..Try reinsterting your charger... And if no luck.. Try changing cable or whole charger...
jprimero15 said:
The kernel have fast charge..if not working then..Try reinsterting your charger... And if no luck.. Try changing cable or whole charger...
Click to expand...
Click to collapse
Im using original cable and charger
ammar_maher said:
Im using original cable and charger
Click to expand...
Click to collapse
Try changing cable or whole charger.. Maybe that's old and not functioning properly now.. And maybe ur phone detecting your charger as "USB Charger" instead of "AC Charger" it should be detected as "AC" and. Mine is working properly with fastcharge.. It works
Working
Testing! Thanks for the present, mate! So far so good!
jprimero15 said:
Working
Click to expand...
Click to collapse
Same here but different device SM-N9008V
You just brought back nougat's SOT (normal use). What I can say is that the phone is heating up during the games (no problems in nougat). Overall state good :good:
Bogdan010 said:
You just brought back nougat's SOT (normal use). What I can say is that the phone is heating up during the games (no problems in nougat). Overall state good :good:
Click to expand...
Click to collapse
I think heating is normal for every Oreo roms in our device..
jprimero15 said:
Working
Click to expand...
Click to collapse
Installed on Tmobile note 3 SM-N900T with @vidwhal Oreo Rom, working fine, improved battery life.
Many thanks for your work
After I flashed I reboot then it said " Could not do a normal boot " I'm using SM-N900K . Can someone help me
Loc Truong said:
After I flashed I reboot then it said " Could not do a normal boot " I'm using SM-N900K . Can someone help me
Click to expand...
Click to collapse
Read post one . <<his kernel is for all galaxy note 3 snapdragon variants>>
Is your N900K Exynos model ??
One listing shows snapdragon and exynos models
JJEgan said:
Read post one . <<his kernel is for all galaxy note 3 snapdragon variants>>
Is your N900K Exynos model ??
One listing shows snapdragon and exynos models
Click to expand...
Click to collapse
My N900k is using snapdragon
Loc Truong said:
My N900k is using snapdragon
Click to expand...
Click to collapse
Contact me in telegram plz.. Not fully tested for KOR yet.. But i can make it work if u go to telegram(coz need help a little bit from a KOR user).. Im just waiting for a tester for KOR variant..
DISCLAIMER
Code:
[B][SIZE="3"]Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Please read completely this thread before using for minimize FAQ.
If you coming from other custom kernel, please restore to stock boot.img or dirty flash your rom before flash this!
[/SIZE][/B]
PROLOGUE
Rebirth is my rebranded kernel named Xprise, i'v started this kernel development 2 months ago. And yeah not too much pro about codes but i loved to learn this My kernel is stands for performance so whosever flashing my kernel is know the risk okay. And I'M NOT FORCING YOU TO USE MY KERNEL! If you don't like it, don't judge. Be a good person
Requirements
BACKUP your Boot.img and ROM Before flash this Kernel.
Unlocked Bootloader as well
Latest TWRP
Wipe dalvik/art cache is mandatory
Features
On V1
Up to date with kernel and CAF tags merged.
Upstreamed to .140.
Merged tags "LA.UM.6.2.r2-04700-sdm660.0" into kernel.
Merged tags "LA.UM.6.2.r1-09500-sdm660.0" into qcacld-3.0, fw-api and qca-wifi-host-cmn.
Added Alucard, ironactive, cafactive, chill, darkness, nightmare and many govs.
Added fsync on/off.
Added KCAL support.
Remove CAF's adapative LMK, which can be too aggressive at times for a device with 4GB of RAM.
Added Adreno Idler (disabled by default).
Added Simple GPU Algorithm.
Added Adreno boost (disabled by default).
Added Arch Power and Gentle Fair Sleepers (Enabled by default).
Added latest UKSM for linux 4.4.y kernel.
Added Power Suspend Mode.
CAKE packet scheduler (https://www.bufferbloat.net/projects/codel/wiki/Cake).
Added many of I/O Schedulers.
Added many of TCP's Congestion.
WakeLock toggles
Overclocked CPU (big upto 2.36GHz & LITTLE upto 1.80GHz).
Underclocked CPU (big & LITTLE downto 300MHz).
And many many features that i don't remember yet.
Changelogs
On V1.1
Upstreamed to 4.4.141-rc1 (it is the in review branch of kernel repo, chances are that it'll be merged as is into stable).
Fix device can't be turned on after being turned off.
Voltages updates (might be not stable for some device, if yes, report please).
Changelogs
On V1.2
Upstreamed to 4.4.141
Boosted crypto performance.
Slimbus/Audio Processor (DSP) overlocked to 12.22MHz! (Better audio in headphone and earpiece).
Changelogs
On V1.3
Upstreamed to v4.4.142.
Upstreamed Binder.
Updated PowerSuspend driver.
Add various HID drivers.
Changelogs
On V1.4
Upstreamed to v4.4.143.
Removed cafactive.
Added and adapted Clarity governor for linux 4.4.y based on cafactive with tweak and tunables by @rainforce279
Moar overclocking.
Enabled devfreq thermal.
And more i didn't notice it maybe
Changelogs
On V1.5
Upstreamed to v4.4.144-rc1.
Added AROMA installer support with selectable themes based on Fly-On-MOD by @slaid480.
Overclock to 2.46 GHz (tested).
Added support for TTL fixation.
WireGuard supported patch.
Undervolt by -5mv.
Trying to fix stuck freq & sdcard shows an empty when opening some files.
Changelogs
On V1.6
Upstreamed to v4.4.145.
Merge tag 'LA.UM.6.2.r2-04800-sdm660.0' into kernel.
DTC 7.0.0-20180726.
Added Sound Control.
Removed Chill gov.
Fixed stuq freq for somes.
Bring back 2.36 GHz.
sdcardfs: Check stacked filesystem depth.
Disable Gentle Fair Sleepers by default.
Changelogs
On V1.7
Upstreamed to v4.4.146-rc1.
Disabled CPU Boost.
Upstream cfq i/o scheduler.
F2FS upstreams.
LITTLE cluster from 1.80GHz to 1.95GHz.
Add polly openmp and few other flags.
Fixed missing clock frequency property.
Touchboost.
Changelogs
On v-REBASE
Kernel source has been rebased to the Pie CAF tags.
Upstreamed to v4.4.154.
Merged tag "LA.UM.7.2.r1-04400-sdm660.0" into kernel.
Added NTFS support.
Some features are missing coz its rebased.
Too lazy to write more changelogs lol.
Changelogs
On v2.0
Modified clang 8 and improved for arm64.</*>
Upstreamed to v4.4.156.
kernel: Merged tag "LA.UM.7.2.r1-04500-sdm660.0".
wlan: Merged tag "LA.UM.6.2.r1-10900-sdm660.0".
Added S2S (sweep2sleep) support through navbar (using KA will not showing an option for it).
Added SDfat support.
Disabled NTFS.
Improved CPU-boost.
Disable add_random.
GPU improvisation.
Added bootinfo from nitrogen.
SPECIAL THANKS & CREDITS:
- Shahan Mik & Vasishath Kaushal (thank you so much).
- Ryan Andri (thank you so much).
- Anirudh Gupta (thank you so much).
- Yudi Widianto (thank you so much).
- Mihran Thalhath (thank you so much).
- Hani Kirkire (thank you so much).
- Tell me if i miss someone else please.
NOTE:MY KERNEL WILL NEVER SUPPORTED IN ALL MIUI BASED ROMS SO PLEASE TAKE A RISK IF YOU FLASHED IT IN MIUI BUT I SUGGEST DON'T FLASH IT!
Downloads
MOD EDIT: Links removed.
XDA:DevDB Information
Rebirth Kernel, Kernel for the Xiaomi Redmi Note 5 Pro
Contributors
Yousef Algadri
Source Code: http://github.com/Haseo97/kernel_rebirth_xiaomi_sdm660
Kernel Special Features: Overclock and Underclocked CPU's
Version Information
Status: Stable
Current Stable Version: v2.0
Stable Release Date: 2018-09-16
Created 2018-07-14
Last Updated 2018-09-16
FAQ:
Q: Working on MIUI?
A: No
Q: All AOSP/LOS support?
A: Yes
Q: Why my big cpu stucked at max frequency?
A: If you do so many set in Kernel Adiutor or any apps, go back to stock settings first. Then do your set again after restoring back to stock settings. (This happen with me ;-
Q: How do i backup and restore my previously kernel?
A: Go to TWRP, choose backup and then choose boot. For restore to previously kernel, choose restore and choose your backuped kernel and voila.
Q: Hows the battery backup using this kernel?
A: Depends on your usage.
Q: Is this supported in Android P semi-GSI?
A: Yes, supported
Kernel didn't work for your device?
Easy, take dmesg logs for me and sent to PM.
Don't know how to take logs? Well, google is always there for help
Thank you, Will try after my Bootloader is Unlocked
Join Telegram group and Channel!
For reports the bugs!
Channel:
http://t.me/rebirthwhyred
Group:
http://t.me/rebirtchat
ScoresView attachment 4549439
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Redmi Note 5 using Tapatalk
MIUI user pls ?
vanzekage said:
MIUI user pls [emoji16]
Click to expand...
Click to collapse
I hate MIUI [emoji23]
Sent from my Redmi Note 5 using Tapatalk
Yousef Algadri said:
I hate MIUI [emoji23]
Sent from my Redmi Note 5 using Tapatalk
Click to expand...
Click to collapse
WTF dev ?
Yousef Algadri said:
I hate MIUI [emoji23]
Sent from my Redmi Note 5 using Tapatalk
Click to expand...
Click to collapse
make love not war ok ))))))
mxilil said:
make love not war ok ))))))
Click to expand...
Click to collapse
Okay
Sent from my Redmi Note 5 using Tapatalk
Any plans of gpu overclocking...??
kiran G. said:
Any plans of gpu overclocking...??
Click to expand...
Click to collapse
Idk yet, its really hard.
Tried many steps still no luck
Will inform if this time successful.
Sent from my Redmi Note 5 using Tapatalk
Nice OC kernel! Good job!
I'm currently on AOSiP with Derp kernel, I'm intrigued with its overclocked & underclocked features, just wanna ask if this kernel has exFAT sd support?
Flynhx said:
I'm currently on AOSiP with Derp kernel, I'm intrigued with its overclocked & underclocked features, just wanna ask if this kernel has exFAT sd support?
Click to expand...
Click to collapse
AOSiP ROM is using SDfat for exFAT, so the answer is nope.
Sent from my Redmi Note 5 using Tapatalk
Adaptive lmk removed,bad life for the 3gb version?
It's this kernel is built for the indian version only though
hon2838 said:
Adaptive lmk removed,bad life for the 3gb version?
It's this kernel is built for the indian version only though
Click to expand...
Click to collapse
Go to google and see what is "whyred" codename.
Its for all whyred, even for China version [emoji57]
Sent from my Redmi Note 5 using Tapatalk
Yousef Algadri said:
I hate MIUI [emoji23]
Sent from my Redmi Note 5 using Tapatalk
Click to expand...
Click to collapse
Me too. Stupid lockscreen and notification ideas
usb fast charging ?