[Completed] In fastboot, when OEM unlock command given, UP for yes doesn't work, down for NO does - XDA Assist

I have a BLU Life Mark, a phone that doesn't seem to exist on the internet. I'd like to install a custom ROM, and have got as far as running the fast boot OEM unlock command in a terminal window (using a mac), but when I do this it brings up the screen where I use volume up to proceed and volume down to back out - volume up simply does not respond!
Any advice as to how to progress from here?
Much obliged,
L

Hi there and welcome to assist,
Unfortunately there is nothing about your question/device on XDA forum. Try a Google search BETTER.
You'll have to create an account to post in the main forums if you have any other questions.
Good luck

Related

[Completed] [Q] Hisense U971 can't complete boot

Hi guys, I usually solve issues by myself buy I need some help with this one.
I bought my son this device, we rooted it together and changed very lightly the UI ogg's , there was no problem keep using it .
Then we thought why not to change the boot animation, so we downloaded this app from google play called .... "boot animation", and now we can't make it boot at all (WE SEE THE NEW ANIMATION ON THE SCREEN, not rebooting).
tried:
1. hard reset and wipe/factory settings... nothing!
2. no ROMS available ,I found 2 roms but the first one claims that it should work through CMD (the computer can't identify the device), the other one causes "verificaiton problem" when trying to install from SD.
3. sent email to HISENSE , hope to hear from them
I need PLEASE any information from someone who knows how to handle this problem, I think that the only way to solve it is to install a new CWM or ROM from SD , offcourse that id it was samsung device it was much easier.
thank you very much
Lior
Hi
Thanks for writing to us at XDA Assist. The best way to tackle this is by reflashing the stock firmware or ROM. All you probably need to do is have the correct drivers installed on your PC in order for it to communicate with your phone. Take a look at this thread:
[TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.2
If you still can't get it to work I'd suggest you ask your question here:
Android Q&A, Help & Troubleshooting
Hi, thanks!
I installed adb+fastboot, adb found the device but fastboot not...
There's no fastboot mode on the recovery, any ideas?
Sent from my SM-G850F using xda Forum
lioryi said:
Hi, thanks!
I installed adb+fastboot, adb found the device but fastboot not...
There's no fastboot mode on the recovery, any ideas?
Sent from my SM-G850F using xda Forum
Click to expand...
Click to collapse
I've linked you to the Android Q&A section just above, please ask any further questions there.
Thread closed, thanks.

[Completed] Stuck Installing Cyanogenmod on Huawei G620S

Hi everyone,
Hope I'm not breaking the rules but I'm desperate. I've Struggled to unlock my phone's bootloader and now I'm trying to change the bootloader. This is my first Android device and my first attempt to install Cyanogen. As I said I'm stuck with adb commands, I googled for hours and I didn't find a clear guide until I installed SDK from Google I managed to use them on my pc, the problem is that it can't detect my device. When I prompt adb devices it doesn't show anything, help please :crying::crying:
PS
The guide I'm following is this one
EDIT:
I managed to enter fastboot but when I try to install TWRP it says "target reported max download size", I tried also to fastboot erase cache but it gives me error. Help!
sanshoo said:
Hi everyone,
Hope I'm not breaking the rules but I'm desperate. I've Struggled to unlock my phone's bootloader and now I'm trying to change the bootloader. This is my first Android device and my first attempt to install Cyanogen. As I said I'm stuck with adb commands, I googled for hours and I didn't find a clear guide until I installed SDK from Google I managed to use them on my pc, the problem is that it can't detect my device. When I prompt adb devices it doesn't show anything, help please :crying::crying:
PS
The guide I'm following is this one
EDIT:
I managed to enter fastboot but when I try to install TWRP it says "target reported max download size", I tried also to fastboot erase cache but it gives me error. Help!
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
We cannot provide technical support nor can other members reply to your posts here on XDA Assist and here is no forum specifically for the Huawei G620S at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you. First, though, consider simply posting in the thread where you found the guide that you are attempting to follow.
Good luck!

[Completed] Am I so awesome that I rly bricked my phony?

Hi, I was about to install myself a new rom and I probably badly cocked up.
well to make it short, I was following instructions here https://wiki.cyanogenmod.org/w/Install_CM_for_honami
and it went good, till I misunderstood one thing, that i need to get phone in fastboot and then navigate in PC cmd to boot.img, well I did, but I was so stupid (I realized moment later) that I had separated the boot.img file from rest of the stuff in cyanogenmod folder. And I booted it wia fastboob and rebooted my phone....
well... red light started and that was it...I have been waiting some time if something will happen but nothing.
then tried to start it, reset it, nothing helped...all the phone does is only the red led will start if I hold power and vol + and if I hold power and vol +- it vibrates once, and after moment it vibrates three times.
my phone is xperia Z1 as you can see from cyanogenmod wiki page -honami
so my question is simple... is there any way to fix this?
Iam rly disapointed it can be broken so easily just by one tim booting wrong file? I dont believe there is no way how to save it... but my PC doesnt recognize the device anymore so I cant fix it or dont know how...
pls help
Hello and thank you for using XDA Assist,
please create an account and ask your question here:
Xperia Z1 Q&A, Help & Troubleshooting
The experts in your device Q&A forum should be able to help you.
Kind regards
Trafalgar Square
XDA Assist

[Completed] ZTE Blade S6 - phone displays a blank screen after selecting bootloader

Hello everyone,
Many thanks for taking the time to read about my problem. I have a ZTE Blade S6 phone and for some reason, it does not bootup properly. I would like to know if it is possible to use ADB commands to copy files from it? Also, what drivers am I missing?
This is the current situation - When I power it on, the ZTE logo shows up with a white background and it is stuck on that forever, I have let it stay that for more than 8 hours and no luck. Have tried the following already:
1. Volume+ and Power button to load into "recovery" mode and tried to wipe cache partition and reset to factot reset - No change and the problem still remains
2. Tried selecting the "bootloader" option, and the screen goes blank. However, on Windows PC it does detect a usb device however I am not sure if it is supposed to show as "Kedacom USB Device" - "Android Bootloader Interface". I tried another Samsung Android device and it does show up on the devices list under the "Android" section.
Could you please help me to restore the Official ROM so that my phone can be used again? ADB command does not seem to detect the device and so I am not sure what I am doing wrong. It will be really helpful to get some advice. Thanks again.
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist

[Completed] Need helping fixing DragonTouch R10

Hey guys, as the title says, i've got a tablet DragonTouch R10 that doesn't go beyond the "dragon touch" screen. It wasnt rooted and it didnt have a custom or custom recovery. It just kind of stopped booting one day. It can go into stock recovery. Also, through ADB command i'm able to "reboot into bootloader" mode but my pc doesn't recognize it, it doesn't recognize fastboot either. the normal adb commands like "reboot recovery" work fine though. Already tried factory reset from the stock recovery too. Is there anyway i can reinstall the stock firmware from there? By the way, i also haven't been able to find it. I did find a .img file, don't know if it helps.
Hi there and welcome to assist,
Unfortunately there is nothing about your question/device on XDA forum. Try a Google search first or contact the manufacturer for stock firmware and flashing instructions.
You'll have to create an account to post in the main forums if you have any other questions.
Good luck

Categories

Resources