Hello there her,
once short Informations about my Person. I´m from Germany and i´m 31 years old. I work at my self in my own Shop for Network-Providers in Germany. I sell Phone´s, Tablets and Notebooks, also contracts and things for mobile Phones
I got an Gear S3 that i have enable the Demo-Mode, but i dont can disable this again
Just i must complete flash or can it be disable over the menu?
Thanks for fast answer
Is simple follow the procedure here:
http://retailsamsung.com/download.php?id=1070
Hallo there,
i´ve an other question. Can it be able, that an Gear S3 Frontier there is in SOftware the Retail-Mode from Samsung, it is not possible to connect with bluetooth to an Samsung Device? I´ve try to connect after deaktivated the retail-mode to Galaxy S6, but the Gear Manager don´t connect to the Gear S3.
I hope anyone can help me again.
You need to reset the Watch over to start the pairing process...
Ok ive try youre option, but it is Not posible. I cant sync my Contacts, messages oder anything. Gear was found from the Manager but sync is Not posible.
I try to softreset my Phone, why over Bluetooth Connection, my Phone makes also from time to time trouble with my Car. Its possible that the Phone had Problem with Bluetooth :-/
But is it also, as Option for me, possible to flash the gear like an Smartphone. For example with odin or other. That the Gear get an new Free Firmware?
Thanks alot
Yes is possible to flash, use this post for references, and make sure you select the correct model:
https://forum.xda-developers.com/gear-s3/development
sajuja said:
Hello there her,
once short Informations about my Person. I´m from Germany and i´m 31 years old. I work at my self in my own Shop for Network-Providers in Germany. I sell Phone´s, Tablets and Notebooks, also contracts and things for mobile Phones
I got an Gear S3 that i have enable the Demo-Mode, but i dont can disable this again
Just i must complete flash or can it be disable over the menu?
Thanks for fast answer
Click to expand...
Click to collapse
I have done it. Just flash it with a generic firmware.
Follow this guide here
Hi I hope it's ok to post and ask if there is a generic firmware for the classic version. I followed your link but it says it's for the frontier version. Curious. I've read through the internet but all I've found is the combination firmware and an old version. I do have a second classic that works perfectly and was wondering if I would be able to extract the firmware and install it on the one that has this demo mode. (Husband and I wanted one each but the store (Fry's) had one new and one floor demo left and we bought them both) I went back to get it fixed but they said their tech guy no longer worked there and to come back at another time. It was super cheap and don't want to return it. Any advice or guidance would be much appreciated. Thank you.
SM-R770 you could try BQC5 from here:
https://forum.xda-developers.com/gear-s3/how-to/rom-samsung-gear-s3-classic-sm-r770-t3646789
OWN RISK!
Please check before in Download Mode... if you see:
SM-R770
or
SM-R770X or something different like SM-R770...
Thanx.
Best Regards
Oh wow! That's awesome! But I do have the one with an X at the end. Will this not work for mine then? Thank you for all your help.
Success! R770X changed to R770 with BQC5 firmware!
I can confirm that BQC5 firmware works on my R770X! I now have a fully functioning Gear S3 Classic and it now states R770 with no X at the end. After all the files loaded on NetOdin the watch restarted with French being the only language. Luckily I do Read\Hear\Write it so I went through the process of connecting the gear through the Gear Manager on my S7 Edge and it connected perfectly and then it changed the language to English!
Upon my web search I noticed that the stores where using S7 Edge's to install the Retail Mode app on the watches so I figured that they were retail watches and that meant it was installing\changing the firmware with an X at the end only to differentiate and grab the correct OTA updates. It made sense because when I temporarily disabled Retail Mode within the app itself all the antennas worked (Bluetooth, Wi-Fi, Location and NFC) so I knew I had a chance that a stock firmware might work.
I hope this helps out anyone else in my situation. I followed the post with the BQC5 and used those files to accomplish this.
Thank you adfree for all your great help. And also xedamen for your tutorial post. Without both your help & guidance I would have stared at a very expensive watch show me the wrong time.
adfree said:
SM-R770 you could try BQC5 from here:
https://forum.xda-developers.com/gear-s3/how-to/rom-samsung-gear-s3-classic-sm-r770-t3646789
OWN RISK!
Please check before in Download Mode... if you see:
SM-R770
or
SM-R770X or something different like SM-R770...
Thanx.
Best Regards
Click to expand...
Click to collapse
Do you have the firmware for SM-R760X (that is what is displayed in download mode)?
Do you have the firmware for SM-R760X (that is what is displayed in download mode)?
Click to expand...
Click to collapse
Yes, I have older Version for SM-R760X AND SM-R770X...
Code:
R770[B][COLOR="Red"]X[/COLOR][/B]XXU1APJD
R770XOXA1APJD
R760[B][COLOR="Red"]X[/COLOR][/B]XXU1APJE
R760XOXA1APJE
Write me PM...
I will upload... as I need few Infos...from such Live Demo Unit...
I mean feedback...
Latest Version seems:
Code:
R760[COLOR="Red"][B]X[/B][/COLOR]XXU2AQC2
Best Regards
Hello, please help me, gear s3 r760xxxu1apl3. How to disable demo?
If somebody have Live Demo Unit:
Code:
SM-R760X
or
SM-R770X
Please contact me via PM.
Thanx in advance.
Best Regards
You have hacked to remove root mode in samsung watch 2018?
LDU s3 gear classic
I Pm'd you. I have the dreaded LDU....
adfree said:
If somebody have Live Demo Unit:
Code:
SM-R760X
or
SM-R770X
Please contact me via PM.
Thanx in advance.
Best Regards
Click to expand...
Click to collapse
---------- Post added at 04:23 AM ---------- Previous post was at 04:17 AM ----------
So I have just went through all of these steps and others I have found on various threads....
Back story**I just bought a used Gear S3 classic...and in live demo mode
I pressed power/home button to the reboot screen......I tap 3 times....I go down to download wireless option.... I tap the power button again to change Modes.. Watch goes into AP mode....I pull up my laptops wireless internet options, I see the Watch on the list, I connect.
...The watch now shows me the IP address and MAC address. Then "Refused connection (111)"
I turned off my windows firewall....I manually closed the other anti virus software I have. I opened task manager to ensure no other software was running.
I am plugged in (ethernet) to the hotel internet i am staying in for a few days on my trip...could this be the problem? Any other ideas?
---------- Post added at 04:27 AM ---------- Previous post was at 04:23 AM ----------
adfree said:
SM-R770 you could try BQC5 from here:
https://forum.xda-developers.com/gear-s3/how-to/rom-samsung-gear-s3-classic-sm-r770-t3646789
OWN RISK!
Please check before in Download Mode... if you see:
SM-R770
or
SM-R770X or something different like SM-R770...
Thanx.
Best Regards
Click to expand...
Click to collapse
Hello
This worked for me https://forum.xda-developers.com/sma...-r770-t3646789
even though it says r770 and my watch is r760
Thank you for the info bro
Related
Hi folks,
I've been having lots of problems with my GT-P5113 (Tab2 10.1 wifi, US version). After several custom ROMs didn't solve my issues I figured I would return it to absolute stock via ODIN. I'm reasonably experienced with ODIN and other tools, but not an expert.
To get the stock firmware, I went to the SAMMOBILE site and made an account. However, when I enter my model number (p5113 or variants on this theme), all I get are firmwares for Slovakia or Canada or Macedonia and the like. No sign of US firmware.
Am I doing something wrong?
Please help me get a stock US version firmware I can ODIN. For me moment I'm using the RIPPER ROM but I'd like to get full stock for a trial. I've tried using Kies, but... well it sucks. It's asking me for the serial number, and the rom doesn't show it. the rom actually thinks it is a 5110...
Any help appreciated!
They usually do for most devices but for some reason neither they nor Samsung updates have it for the 5113. The Canadian one shouldn't hurt but no guarantees there.
jrc2
Sent from my T-Mobile S2 using Tapatalk
How annoying!
I eventually got my serial number via Phone Info SAMSUNG app. I put on Ripper ROM, got it up and running, and it seems to be mostly doing OK for my kids games. Eventually looked up serial number in there. For now I'll stick with it. It thinks I'm a 5110, though... I guess I should edit the buildprop.
Marc
PS: If anyone has a link to a site with the stock 5113 US firmware, I'd appreciate it!
Sigh. I thought I found a link, from this page:
http://androidromupdate.com/2013/12...sung-galaxy-tab-2-10-1-gt-p5113-p5113ueucmk3/
But the link they give is dead... takes to "rapid gator" and says file not found, do I want to pay for an account...
Frankenscript said:
Sigh. I thought I found a link, from this page:
http://androidromupdate.com/2013/12...sung-galaxy-tab-2-10-1-gt-p5113-p5113ueucmk3/
But the link they give is dead... takes to "rapid gator" and says file not found, do I want to pay for an account...
Click to expand...
Click to collapse
I have that one as well. Shoot me an email address.
p.s. p5113 and p5110 doesnt matter they are both basically the same. I wouldnt go messing with buildprops. not necessary
Frankenscript said:
How annoying!
I eventually got my serial number via Phone Info SAMSUNG app. I put on Ripper ROM, got it up and running, and it seems to be mostly doing OK for my kids games. Eventually looked up serial number in there. For now I'll stick with it. It thinks I'm a 5110, though... I guess I should edit the buildprop.
Marc
PS: If anyone has a link to a site with the stock 5113 US firmware, I'd appreciate it!
Click to expand...
Click to collapse
CSP III said:
I have that one as well. Shoot me an email address.
p.s. p5113 and p5110 doesnt matter they are both basically the same. I wouldnt go messing with buildprops. not necessary
Click to expand...
Click to collapse
Yep, all ROMs for the 5110 will work on the 5113 with no problems. Same for 3110/3113. They stopped making 5113 and 3113 ROMs a while ago.
---------- Post added at 08:31 PM ---------- Previous post was at 08:24 PM ----------
Also,
Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Tab 2 10.1 GT-P5113 model.
Cellular South: P5113UEUCMK3_P5113XARCMK3_XAR.zip
Click to expand...
Click to collapse
Source: http://nasirtech.blogspot.com/2013/12/ueucmk3-jb-422-official-firmware-galaxy-tab2-10-1-p5113.html
This page says that the files are universal, so you should use the Cellular South file. I've seen the same thing on multiple pages. If for some reason you cannot download the file from sammobile, here is a link to download the file. http://terafile.co/353308769276/XAR-P5113UEUCMK3-20131209190549.zip. It is from the same page that has the link to RapidGator (samsung-updates.com)
The ONLY difference is with the IR Blaster. Thats all Ffffffolks!
Thanks JRC2! Good info there.
Another kind XDA user sent me a private link to the files, and it's good to see a public link for Terafile. For some reason I can never get that Terafile link to work... The page loads, I click to download, nothing happens other than it shows me paid options. It says a free, slow download is available but I was never able to get it to start downloading. Perhaps something about the way I've got my browser configured...
Anyway, I'm good to go and hopefully future readers can get the terafile link to work for them, or download from SAMMOBILE now that which one to use is cleared up. Thanks to this wonderful community.
:good:
Marc
Does anybody still have this stock rom they could kindly send me? I am having a hell of a time trying to get a link that will actually work. Would be much appreciated. Thanks!
tysnydes said:
Does anybody still have this stock rom they could kindly send me? I am having a hell of a time trying to get a link that will actually work. Would be much appreciated. Thanks!
Click to expand...
Click to collapse
https://www.dropbox.com/s/skbw15p37ll0b2g/P5113UEUCMK3_P5113XACCND2_XAC.zip?dl=0
GEAR S3 R760XXU2BQH1 STOCK ROM_OXA_MULTI CSC
STEPS THROUGH NETODIN:-
1.Download netOdin through google or previous xda posts,
2.now,download all three types of files from download section.
3.goto gear s3 press and hold on menu button till it shows rebooting.
4.at that same time press 3 times on menu button.then it will show options.
5.goto download(wireless).and hold the menu button.
6.change the wireless connection to ap through double tap on menu button.
7.open netOdin and put all three files.
8.goto your pc wifi section connect with R760.
9.then it will appear on netodin as connected and start.
10.note that gear charge should be more than 50%.
**i am not responsible for any brick but i have successfully flashed it.**
DOWNLOAD SECTION:-
AP LINK- https://drive.google.com/file/d/0B5Cu0annFY1bczFDdG5taVBRWnM/view?usp=drivesdk
BL LINK- https://drive.google.com/file/d/0B5Cu0annFY1bSmRmU1V4NXd2UFU/view?usp=drivesdk
CSC LINK- https://drive.google.com/file/d/0B5Cu0annFY1bajVUOXg5WVRSMmM/view?usp=drivesdk
CONTRIBUTIONS BY:-
SPECIAL THANKS TO ALL TELEGRAM MEMBERS OF INDIAN NOTE8,S8/S8+ GROUP
thanks to all sponsers
@watsinaname
@msri3here
@Quick Silver
@cool_sid007
I HOPE SO MANY OF THEM ARE WAITING FOR THIS FIRMWARE.ITS TIME TO ENJOY NOW
if u like my work.please motivate by pressing thanks button and through PayPal u can donate me for more paid programs, https://www.paypal.me/aslamparvej
Samsung Pay TPK differ...
Code:
com.samsung.samsung-pay-app.tpk
Few files are different... compared with BQC5 Firmware.
Only as info.
Best Regards
adfree said:
Samsung Pay TPK differ...
Code:
com.samsung.samsung-pay-app.tpk
Few files are different... compared with BQC5 Firmware.
Only as info.
Best Regards
Click to expand...
Click to collapse
yeah mate.
I flashed it too. I'm configuring it
Do you know the changes?
Edit:
All working fine. Still no Samsung pay for me in Spain
we are still waiting tizen 3
i have gear s3 classic.
@r4yv3n
Spain looks supported on Samsung site
https://forum.xda-developers.com/showpost.php?p=74419875&postcount=14
Check maybe Instructions or infos in your country:
http://www.samsung.com/es/samsung-pay/
If Spay work on your Mobile... then in THEORY it is possible to enable it also on Gear...
Australia offers nice Video:
https://www.youtube.com/embed/7PUh897OoC8
Best Regards
2.3.2.4 is the official update we r getting for s3 ?
2.3.2.4 is the official update we r getting for s3 ?
Click to expand...
Click to collapse
Samsung are funny ... depend on your Sales Code/CSC...
BQH1 is latest for:
Code:
Korea KOO
China CHC
USA XAR
.
.
.
Other countries... like:
Code:
Germany DBT
India INU
.
.
.
Still on BQC5...
Ask Samsung why they thi S h tttttttttttt.
Best Regards
Returned back to 2.3.2.3 using factory firmware, and now is updating to Tizen 3.0 (with 2.3.2.4 no update available)
r4yv3n said:
Returned back to 2.3.2.3 using factory firmware, and now is updating to Tizen 3.0 (with 2.3.2.4 no update available)
Click to expand...
Click to collapse
Enjoy buddy.will update tizen 3.0.0.1 firmware in future.
I was under the 2.3.2.4 version. I am to go under the 2.3.2.3 version and the miracle the update 3.0.0.1 came fast in case for information
pioupiou69600 said:
I was under the 2.3.2.4 version. I am to go under the 2.3.2.3 version and the miracle the update 3.0.0.1 came fast in case for information
Click to expand...
Click to collapse
enjoy tizen 3.0.0.1 mate.its such an awasome Upgrade from samsung.
aslam4580 said:
enjoy tizen 3.0.0.1 mate.its such an awasome Upgrade from samsung.
Click to expand...
Click to collapse
Do you know what happend to the dismiss notifications? On previous firmware when i got notification i could swipe up to dismiss it. Now i have to scroll to the bottom and press the dismiss button.
RAM GUY23 said:
Do you know what happend to the dismiss notifications? On previous firmware when i got notification i could swipe up to dismiss it. Now i have to scroll to the bottom and press the dismiss button.
Click to expand...
Click to collapse
Yeah..i have faced the same issue.i hope samsung will bring that fix with next security patch update for gear.
aslam4580 said:
Yeah..i have faced the same issue.i hope samsung will bring that fix with next security patch update for gear.
Click to expand...
Click to collapse
2 guys on different thread do not have this issue. Must be some kind setting we are not having enabled or disabled then. Very annoying. I am using iphone also but i know it worked 2 days ago fine.
I dont understand the point of this? Isnt this just stock..:?
Motawa88 said:
I dont understand the point of this? Isnt this just stock..:?
Click to expand...
Click to collapse
Its stock firmware only.dont worry mate.that problems mentioned above is came with tizen 3.0.0.1 update.
Hi, what's is the benefit of multi CSC? Can we choose the country or it will be automatically based on your location?
aslam4580 said:
enjoy tizen 3.0.0.1 mate.its such an awasome Upgrade from samsung.
Click to expand...
Click to collapse
Not quite...it would appear. Lots of complaints about battery drain and "...battery charge cool down..." bug around this forum...
Moe5508 said:
Not quite...it would appear. Lots of complaints about battery drain and "...battery charge cool down..." bug around this forum...
Click to expand...
Click to collapse
Yeah.battery bugs are there..will planning for optimize that hope sammy will do some thing.
Hello!
Finally I got the latest firmware for the Galaxy Gear S2 R720 and older firmwares :
R720XXU2AOJ3 / R720OXA2AOJ3
R720XXU2BPA4 / R720OXA2BPA4
R720XXU2EPK5 / R720OXA2EPK5
R720XXU2FRC1 / R720OXX2FRC1
Link: https://mega.nz/#F!6MNFkIBA!4e-4_3EFb8aaw20KV01kaw
Enjoy it!
Are any of these ROMs UK or EU versions? I flashed the last one and Samsung pay doesn't work in the UK for me.
@shenery Samsung Pay unfortunately doesn't work in the UK full stop.
Can someone tell me where is the tread that explains how i chose the correct firmware version and how i flash it? This is the first time I'm interested in the forum of the Gear S2 and it looks interesting. Thanks!
sorry to necropost, but do you have, or know where i could get the firmware for the G735V? Im looking specifically for R735VVRU3DRC1. Any help would be greatly appreciated
Too late?
Youdoofus said:
sorry to necropost, but do you have, or know where i could get the firmware for the G735V? Im looking specifically for R735VVRU3DRC1. Any help would be greatly appreciated
Click to expand...
Click to collapse
Here is firmware for SM-735V: full-repair-firmware.com/2018/05/repair-firmware-r735v.html
Hope it isn't too late.
Davejaws said:
Here is firmware for SM-735V: full-repair-firmware.com/2018/05/repair-firmware-r735v.html
Hope it isn't too late.
Click to expand...
Click to collapse
its never too late to try to help someone out irrespective of the outcome. That being said, Sammy rolled out an update that fixed the issue. Watch has been back in business for a few months now. Super happy kiddo! He was so let down when it started effing up. Thanks for responding man, sincerely.
Is the latest version at the top of the page or bottom... Im on R732XXU2AOJ3 is this the base version? Many thanks
Kash20011 said:
Is the latest version at the top of the page or bottom... Im on R732XXU2AOJ3 is this the base version? Many thanks
Click to expand...
Click to collapse
The latest is R732XXU2FSI1
Thank you bbsc much appreciated this isn't in the list. Mine isn't updating automatically via the android app. So I'm assuming there's no fix for this other than using Odin as I've found no other mention.
I'll try to find the latest is this the 6mb one that updates battery life.
As i think I'll need to go through all the others to get to the latest version, if Odin is the way to go.
Thanks for the help.
Atb
Kash20011 said:
Thank you bbsc much appreciated this isn't in the list. Mine isn't updating automatically via the android app. So I'm assuming there's no fix for this other than using Odin as I've found no other mention.
I'll try to find the latest is this the 6mb one that updates battery life.
As i think I'll need to go through all the others to get to the latest version, if Odin is the way to go.
Thanks for the help.
Atb
Click to expand...
Click to collapse
All known R732 firmware versions are listed here.
The watch should autoupdate up to R732XXU2FRC1
I think, it's possible to find R732XXU2FSD1 for free over the internet.
And definitely, it's possible to get R732XXU2EPK5 from here,
Good luck.
Thank you for the helpful info, the files above Ive downloaded but they are in zips and password protected has anyone the password to decompress.
Many thanks again
---------- Post added at 08:23 PM ---------- Previous post was at 08:20 PM ----------
Found it wasnt looking there. Right down to flashing. Thanks windows4droid for the files thank goodness their hosted... fingers crossed.
i was able to connect with my iphone se 2020, but after connection issues i reset the watch but now i cant get it to connect. it works with my burner phone galaxy j5 2016
zippzYT said:
i was able to connect with my iphone se 2020, but after connection issues i reset the watch but now i cant get it to connect. it works with my burner phone galaxy j5 2016
Click to expand...
Click to collapse
that's normal, there is a bug in ios, you can not paired your gear twice ... you probably need to flash it.
Good morning every one,sorry for the intrusion, i'm new here.
Im Based in South Africa and I need a XFA (South African Region) Stock rom for my gear s2 SM-R720.
Would anyone be able to assist me please?
Thank you in advance
Hi everyone, new guy here, i just discovered odin and the firmware installation yesterday as i used the BQC5 to "repair" a gear s3 classic stuck in a reboot loop (Sorry if it is too much info but im really proud of myself as im not a very techsmart person), and i was wondering if it is worth changing to the CQK3 that i found in this forum using the same method as by some reason i cant actualize it further using the app , i read that it has tizen 3 and is able to hold more to the battery life of the watch (But i also read here about an update to the firmware that drains watch's battery),
In short im just wondering if it is worth it to go threw the hastle of changing them
Thanks a lot!
To be sure.
You repaired SM-R770?
I will try to find Tizen 4 Firmware for you...
Could take some time...
Best Regards
Yes i did! And thanks a lot!
adfree said:
To be sure.
You repaired SM-R770?
I will try to find Tizen 4 Firmware for you...
Could take some time...
Best Regards
Click to expand...
Click to collapse
Yes i did! And thanks a lot!
Sorry I am soo la ehm busy...
DSA1 is for instance here:
https://forum.xda-developers.com/smartwatch/gear-s3/rom-tizen-4-odin-files-sm-r765t-sm-t3892404
Best Regards
Hey , I'm wanting to flash the stock firmware to my galaxy watch 4 using netodin but can't find the firmware anywhere . The model is SM-R865-034D
Good luck I been trying for months and can't find it. If I can find the name of the person I was told could get it I will send you a private message. But he charges like $15 for it I think.
butchieboy said:
Good luck I been trying for months and can't find it. If I can find the name of the person I was told could get it I will send you a private message. But he charges like $15 for it I think.
Click to expand...
Click to collapse
just bought the watch but it won't pair to my phone so I can't set it up I've tried everything even factory reset my phone but it refuses to pair
A
SM-R865U for USA
Or SM-R865FFFF ?
B
Samsung Phone or other Brand?
C
You can start in Standalone Mode... without paired Phone.
Maybe for Software Update... attempt
This Trick exists since Gear S2...
Best Regards
adfree said:
A
SM-R865U for USA
Or SM-R865FFFF ?
B
Samsung Phone or other Brand?
C
You can start in Standalone Mode... without paired Phone.
Maybe for Software Update... attempt
This Trick exists since Gear S2...
Best Regards
Click to expand...
Click to collapse
Thanks I didn't know about the standalone mode & I'm in the UK & have an oppo find X5 lite
You can check Firmware on Device....
*#1234#
And you can try to update... in Standalone Mode...
I have only Samsung crap...
So no idea about Oppo Phone or other Brand...
I can only read that Samsung prefer Samsung...
Anyway.
Still no idea if SM-R865U or F
For US Device you can buy... Firmware
For SM-R865FFFFFF NO chance at the moment.
But Firmware is not really your problem... IMHO.
If you can try Samsung Phone...
Best Regards
It's SM-R865F , running the latest software I guess I'll have to wait till it gets an update or my phone finally gets the android 12 update & see if that fixes it
lukeotis said:
just bought the watch but it won't pair to my phone so I can't set it up I've tried everything even factory reset my phone but it refuses to pair
Click to expand...
Click to collapse
What do you mean by "refuses to pair"? Did your phone find it by BT?
shaharofir said:
What do you mean by "refuses to pair"? Did your phone find it by BT?
Click to expand...
Click to collapse
Yeah it finds it & then sends a pair request & when I accept it the watch says to continue setup on the phone but it hasn't paired & keeps sending requests to my phone
Have you done the basics? Uninstall the Galaxy Watch app, clean the cache, etc?
shaharofir said:
What do you mean by "refuses to pair"? Did your phone find it by BT?
Click to expand...
Click to collapse
Yeah it finds it & then sends a pair request & when I accept it the watch says to continue setup on the phone but it hasn't paired & keeps sending requests to my
shaharofir said:
Have you done the basics? Uninstall the Galaxy Watch app, clean the cache, etc?
Click to expand...
Click to collapse
Yeah even did a full factory reset of both my watch & phone I think it's a bug in the latest software on the watch
lukeotis said:
Yeah it finds it & then sends a pair request & when I accept it the watch says to continue setup on the phone but it hasn't paired & keeps sending requests to my
Yeah even did a full factory reset of both my watch & phone I think it's a bug in the latest software on the watch
Click to expand...
Click to collapse
Android Version?
Android 11
lukeotis said:
Android 11
Click to expand...
Click to collapse
Can't you try with someone elses phone, preferably a Samsung one?
TheIntruder said:
Can't you try with someone elses phone, preferably a Samsung one?
Click to expand...
Click to collapse
Just what I wanted to suggest
TheIntruder said:
Can't you try with someone elses phone, preferably a Samsung one?
Click to expand...
Click to collapse
Yeah got it set up on a galaxy a51 just can't get it to pair with my new oppo
lukeotis said:
Yeah got it set up on a galaxy a51 just can't get it to pair with my new oppo
Click to expand...
Click to collapse
You definitely don't need firmware then.... I'd do some searching around maybe oppo forums, you can't be the only person with this issue.
TheIntruder said:
You definitely don't need firmware then.... I'd do some searching around maybe oppo forums, you can't be the only person with this issue.
Click to expand...
Click to collapse
Yeah I figured when it set up on the galaxy phone it must be my oppo that's the problem I've been trying to update it to colour os 21.1 for the android 12 update but can't get it officially & cant find the firmware online , oppo doesn't allow bootloader access either so I can't flash a custom ROM
lukeotis said:
Yeah I figured when it set up on the galaxy phone it must be my oppo that's the problem I've been trying to update it to colour os 21.1 for the android 12 update but can't get it officially & cant find the firmware online , oppo doesn't allow bootloader access either so I can't flash a custom ROM
Click to expand...
Click to collapse
Maybe start in this thread?
It mentions various oppo models, don't know if it's your problem though.
[RESTRICTIONS-REMOVED] Samsung Health Monitor - WearOS - 1.1.3.002 - Root, Age, Country & Device Restriction Removed - 23rd May 2023
Hello Everyone, I hope you all are fine... ~~~ WearOS WATCHES ONLY ~~~ ~~~ FEATURES, BUGS & FUTURE WORKS~~~ FEATURES: Works on Samsung Watch4 and Watch5 (as mentioned Samsung WearOS Watches), Multilanguage, no root detection, no country...
forum.xda-developers.com
Didn't work unfortunately just does the same thing says continue setup on the phone & the phone just scans for devices again