I have Just Repaired my H810 after 6 month dead . Now I have full procedure to recover any LG Phone witch has in this condition ,there is no download mode,no recovery and nothing sign of life..
Now you want *.img from running AT&T /h810v10o/H81020n/ h81021z/h81022b (lolipop/marshmallow baseband ) Firmware because there is no full stock firmware available .
Create Backup.img From Running h810v10o/H81020n/ h81021z/h81022b (lolipop/marshmallow baseband ) rooted system
1.Format external MicroSD card with exFAT system file , ( Most Important thing is SD card more than 32GB (which is size of the whole partition) use 64Gb or 128Gb card
2.Do a full factory reset from CWM TWRP or any recovery
3.Now open ADB shell
adb shell
su
dd if=/dev/block/mmcblk0 of=/storage/sdcard1/backup.img bs=8192 seek=65536 count=579584
it will take around sone time
Size of the backup.img is arround 32gb
Now You have backup.img in your hands
now same method to unbrick
Steps to Unbrick:
1. Insert your memory card in Card Reader and Format it using Windows Format. While formatting "uncheck Quick Format" and Change Type to "exFat". You can alternatively use SD Card Formatter but make sure that the card is in exFat format.
if exFAT not works than try to format with FAT32
2. Once format is completed, install Win32DiskImager and open it. Add SystemImage.bin file. If it does not show the bin file just rename SystemImage.bin to SystemImage.img and then select it. Select your memory card and Click Write.
(You can alternatively change the file types on the win32diskimage from .img to all types)
Win32diskimage
3. One the Write Completes. Eject Card and insert in your LG G4 H810. Press Volume Up Button while connecting the USB Cable.
4. There you go, it will open the download mode. Now Open LGUP Tool as admin. It will show the device as connected. Select the Original KDZ/TOT Firmware and Click Start. it will complete and your Mobile will reboot.
5. Now its Done. Enjoy!
or u can use eMMC ADB Dumper
dump boot1
and boot2
any of one images works to get download mode
does anyone have download link
mahan2607 said:
I have Just Repaired my H810 after 6 month dead . Now I have full procedure to recover any LG Phone witch has in this condition ,there is no download mode,no recovery and nothing sign of life..
Now i want *.img from running AT&T H81020n Firmware because there is no full stock firmware available .
Create Backup.img From Running H81020n rooted system
1.Format external MicroSD card with exFAT system file , ( Most Important thing is SD card more than 32GB (which is size of the whole partition) use 64Gb or 128Gb card
2.Do a full factory reset from CWM TWRP or any recovery
3.Now open ADB shell
adb shell
su
dd if=/dev/block/mmcblk0 of=/storage/sdcard1/backup.img bs=8192 seek=65536 count=579584
it will take around sone time
Size of the backup.img is arround 32gb
Now You have backup.img in your hands
I Have Sold my Phone So any member provide this image file here .
Click to expand...
Click to collapse
Hello master, i have the same problem, my h810 at&t is dead since a long time, please what files used?? i tried with many files and write in my sd 32 gb and still dead, i believe the files is wrong and you have the one, please up the file, be my savior .
GENTLEMAN I HAVE JUST SOLD MY PHONE , you need a Running H81020n/ h81021z/h81022b (marshmallow baseband ) (marshmallow ,old baseband not supported)rooted system to create bin file . i ahve already posted to create bin file method , believe me its work 100% . no other files works because h810 have different partition size ( not work 811,812,815,818 bin file ) , important thing is that you need a working marshmallow rooted h810 to create files . one thing is also important that you need to 32 gb microsd or greater to backup the image
Can someone share backup dump please
mahan2607 said:
GENTLEMAN I HAVE JUST SOLD MY PHONE , you need a Running H81020n/ h81021z/h81022b (marshmallow baseband ) (marshmallow ,old baseband not supported)rooted system to create bin file . i ahve already posted to create bin file method , believe me its work 100% . no other files works because h810 have different partition size ( not work 811,812,815,818 bin file ) , important thing is that you need a working marshmallow rooted h810 to create files . one thing is also important that you need to 32 gb microsd or greater to backup the image
Click to expand...
Click to collapse
Didnt you saved the dump ? Plz i am not in the us and i cant get access to another g4 At&t
mahan2607 said:
GENTLEMAN I HAVE JUST SOLD MY PHONE , you need a Running H81020n/ h81021z/h81022b (marshmallow baseband ) (marshmallow ,old baseband not supported)rooted system to create bin file . i ahve already posted to create bin file method , believe me its work 100% . no other files works because h810 have different partition size ( not work 811,812,815,818 bin file ) , important thing is that you need a working marshmallow rooted h810 to create files . one thing is also important that you need to 32 gb microsd or greater to backup the image
Click to expand...
Click to collapse
ok my friend, thanks, is a big step to revive my h810
Create backup.img and upload for other members
Why none of members dont want to share dump files
Its been 7 months since my h810 is sleeping
Amit2310 said:
Why none of members dont want to share dump files
Its been 7 months since my h810 is sleeping
Click to expand...
Click to collapse
We don't have root with marshmallow on H810. So we can't make a dump.
N4cr2k said:
We don't have root with marshmallow on H810. So we can't make a dump.
Click to expand...
Click to collapse
gentleman than create lolipop backup.img for those who have bricked with lolipop
now you an use this tool eMMC ADB Dumper
mahan2607 said:
now you an use this tool eMMC ADB Dumper
Click to expand...
Click to collapse
It looks like that tool requires root?
N4cr2k said:
It looks like that tool requires root?
Click to expand...
Click to collapse
you just upload the lolipop rooted emmc backup for users
Many peoples are still using rooted lollipop for h810, even i was using it , its seems like just they are not interested to upload 1gb of file
---------- Post added at 06:17 PM ---------- Previous post was at 06:09 PM ----------
http://ouo.io/XK4tFF
This file is not gonna work ?
Amit2310 said:
Many peoples are still using rooted lollipop for h810, even i was using it , its seems like just they are not interested to upload 1gb of file
---------- Post added at 06:17 PM ---------- Previous post was at 06:09 PM ----------
http://ouo.io/XK4tFF
This file is not gonna work ?
Click to expand...
Click to collapse
this file is not created by this method so its not work for bootable sd card , its for use any kind of box Z3X or emmc pro
Mr. Amit , please upload this file for members
Amit2310 said:
Many peoples are still using rooted lollipop for h810, even i was using it , its seems like just they are not interested to upload 1gb of file
---------- Post added at 06:17 PM ---------- Previous post was at 06:09 PM ----------
This file is not gonna work ?
Click to expand...
Click to collapse
This file don't work, i tried many times but the result is the same, dead, no response.
Please men, the solution is in your hands, up the file
jasta 11 said:
This file don't work, i tried many times but the result is the same, dead, no response.
Please men, the solution is in your hands, up the file
Click to expand...
Click to collapse
I dont have file bros , my own h810 is dead from many months
---------- Post added at 08:42 AM ---------- Previous post was at 08:40 AM ----------
I seen in gsmforum that it can be fixed using medusa box by selecting h811 as product then flashing it with kdz file of h810.
Shops in my city dont have that box , you can go to shop in your city and try if they have that box
---------- Post added at 08:47 AM ---------- Previous post was at 08:42 AM ----------
mahan2607 said:
Mr. Amit , please upload this file for members
Click to expand...
Click to collapse
http://www.mediafire.com/?npkrdqrkz03el2e
This file ?
mahan2607 said:
gentleman than create lolipop backup.img for those who have bricked with lolipop
Click to expand...
Click to collapse
You stated that you made a backup from a working phone that we can use to recover. Do you have this image uploaded somewhere so we can download it to repair our dead h810's?
Related
I have managed to get the 3d max bin files merge them into one and have the baseband also the dll if anyone can get the apk's outta them that would be great..
I am confused to how to do this i will upload them now.. please be patiant..
What if we mixed a p920 baseband and used the P720 AP bin file i will try that when i get back from Birmingham after the weekend..
Meemo23 said:
I have managed to get the 3d max bin files merge them into one and have the baseband also the dll if anyone can get the apk's outta them that would be great..
I am confused to how to do this i will upload them now.. please be patiant..
What if we mixed a p920 baseband and used the P720 AP bin file i will try that when i get back from Birmingham after the weekend..
Click to expand...
Click to collapse
great !
so any possibilities that it would work flawlessly on our thrills/o3ds ?
Meemo23 said:
I have managed to get the 3d max bin files merge them into one and have the baseband also the dll if anyone can get the apk's outta them that would be great..
I am confused to how to do this i will upload them now.. please be patiant..
What if we mixed a p920 baseband and used the P720 AP bin file i will try that when i get back from Birmingham after the weekend..
Click to expand...
Click to collapse
i'm stuck on .bin for now, we need to find correct offset to create system.img
If i don't mistake p920 offset was from 00B80000 to 22ABFFF0
anyone can help us?
For the v20B .bin, the system.img file block was from B80000 all the way to the end of the .bin file. The end block depends on the size of the firmware and as such varies with different firmwares.
Maybe you could dd it in Ubuntu and inject the image into a normal p920 bin??
pandaball said:
For the v20B .bin, the system.img file block was from B80000 all the way to the end of the .bin file. The end block depends on the size of the firmware and as such varies with different firmwares.
Click to expand...
Click to collapse
so we need to know exact size of system.img?
any way to find it?
samno said:
Maybe you could dd it in Ubuntu and inject the image into a normal p920 bin??
Click to expand...
Click to collapse
What I did for the v20B bin was to copy the blocks 00B80000 to the end block and paste them in a new file using Winhex, rename it to system.img, go over to linux and use
sudo mkdir temp
sudo mount -o loop system.img temp
Click to expand...
Click to collapse
That way, I can then extract all the files using Terminal, like for example sudo cp system/app/LGHome.apk LGHome.apk (assuming default folder is pointed at desktop) to extract everything.
More info in the original thread: http://forum.xda-developers.com/showthread.php?t=1517531
Fab985 said:
so we need to know exact size of system.img?
any way to find it?
Click to expand...
Click to collapse
No need. System.img extends from 00B80000 all the way to the end of the file. The end block of the .bin file is also the end block of the system.img file.
I tried that but i get: "you must specify the filesystem type" in terminal when i try to mount. Is 00B80000 start? Can you take a look at that? Or bin is not extracted ok.
I don't have the download link... post it here and I'll take a look when I have time, I'm lazy to look for it
pandaball said:
I don't have the download link... post it here and I'll take a look when I have time, I'm lazy to look for it
Click to expand...
Click to collapse
LGP720 V10A_00
At first glance, so much for a 'lighter and thinner' rom when it's almost a full 100mb larger than the P920's rom
pandaball said:
At first glance, so much for a 'lighter and thinner' rom when it's almost a full 100mb larger than the P920's rom
Click to expand...
Click to collapse
Do you think you can extract everything from the kdz?
i will upload the ap file and stuff later i am tired right now will upload when i can...
Yeah, can extract it fine.
---------- Post added at 10:21 PM ---------- Previous post was at 10:11 PM ----------
My WinHex isn't working for some reason, will debug it tomorrow. In the meantime, try looking for the EXT4 magic number 0xF30A (0A F3 in hex) or 13 00 00 00 which is the compatibility structure between ext3 and ext4. The last file with any of these should be system.img.
If not, try the site here and see if it helps you find the start of the img files.
Well guys im really cheering that you can port that to O3D. Sadly im totally dont know how to do the port therefore i cant help to you, but i wish i could.
Go ahead you will make many ppl really happy if you can success (including me -> my genitalia will be the biggest ever xD)
I might have a hit. Winhex is still broken but someone with a working version of it could help me out with it.
154F2EFB seems to be the starting block if I'm interpreting it correctly. Could someone copy from that offset onwards all the way to the end, save it as an img and see if it mounts fine in Linux? This is a semi-wild guess since 0AF3 in hex brings up 5.3k hits while the text based search brings up 154F2EFB as the only hit which strikes me as odd but we'll see. The file size is approximately 300MB which is about right.
pandaball said:
I might have a hit. Winhex is still broken but someone with a working version of it could help me out with it.
154F2EFB seems to be the starting block if I'm interpreting it correctly. Could someone copy from that offset onwards all the way to the end, save it as an img and see if it mounts fine in Linux? This is a semi-wild guess since 0AF3 in hex brings up 5.3k hits while the text based search brings up 154F2EFB as the only hit which strikes me as odd but we'll see. The file size is approximately 300MB which is about right.
Click to expand...
Click to collapse
Wait I will try.
Sent from my LG-GT540 using XDA
---------- Post added at 04:10 PM ---------- Previous post was at 03:56 PM ----------
154f2efb didnt find. I find 0af3 as text 3 times. I will copy last one it has 373 MB maybe it will mount. I will try now.
sorry 154f2efb is a offset lol
---------- Post added at 04:23 PM ---------- Previous post was at 04:10 PM ----------
I tried from offset 154f2efb it is not working i cant mount it. it is 322mb file. Again: you must specify the filesystem type.
hey guys have you you tried this method from this thread to get the system apks ??? or to put in another way would this work for the 3d max extracted files http://forum.xda-developers.com/showthread.php?t=899580
rezzsha said:
hey guys have you you tried this method from this thread to get the system apks ??? or to put in another way would this work for the 3d max extracted files http://forum.xda-developers.com/showthread.php?t=899580
Click to expand...
Click to collapse
Have you actually read this thread? You would know that we're stuck on the final step of extracting system.img if you did.
only thing that is manage to extract are .png files, there are some interesting icons like cube I did it with win hex. It have options too extract known file tipes. It can also extract zip files and it extract parts off apps with it. If we could know header and footer of apk file it could extract them too. I tried but with no succes, I get only parts of apks. I attached 4 icons:
iodak said:
only thing that is manage to extract are .png files, there are some interesting icons like cube I did it with win hex. It have options too extract known file tipes. It can also extract zip files and it extract parts off apps with it. If we could know header and footer of apk file it could extract them too. I tried but with no succes, I get only parts of apks. I attached 4 icons:
Click to expand...
Click to collapse
haha cool i am still trying to rip the whole system apart to get all the files needed to build and port the whole rom.. Even if i do manage to get it working it won't solve our GC problems as we can't use 3D max's baseband as it corrupts your imei..
Hi,
As the title suggests I'm looking for the original firmware of the Alcatel OT 4033D because, after I bricked mine, I can't find a working ROM for my phone (I've tried various ROM for MT6572 processor and Android 4.2.2 but I don't read the SD card and the SIM (Although setting the correct IMEI))
If someone is own this device could make me a dump? I just need the file "system.img", the others I already have.
PS: It's okay if it's not the file .Img but the zip of the partition with the files contained in /system
Thanks in advance to who answers C:
RESOLVED
Full ROM dump (MTKtools): https://www.mediafire.com/?1q2k2ppl1qvhvqr
recovery.img CWM5: https://www.mediafire.com/?bg4rtah9tsbhszs
nandorid backup without data partition: https://www.mediafire.com/?kbenlbzd5qvi73k
n1osbb2 said:
Hi,
As the title suggests I'm looking for the original firmware of the Alcatel OT 4033D because, after I bricked mine, I can't find a working ROM for my phone (I've tried various ROM for MT6572 processor and Android 4.2.2 but I don't read the SD card and the SIM (Although setting the correct IMEI))
If someone is own this device could make me a dump? I just need the file "system.img", the others I already have.
PS: It's okay if it's not the file .Img but the zip of the partition with the files contained in /system
Thanks in advance to who answers C:
Click to expand...
Click to collapse
i need it too.. i had also bricked mine.
mixterz92 said:
i need it too.. i had also bricked mine.
Click to expand...
Click to collapse
Tomorow maybe I have the ROM dump from a phone of my friend.. I'll try to flash it. If it works I'll upload the ROM and I'll link you the file
( sorry for my bad english >_> )
n1osbb2 said:
Tomorow maybe I have the ROM dump from a phone of my friend.. I'll try to flash it. If it works I'll upload the ROM and I'll link you the file
( sorry for my bad english >_> )
Click to expand...
Click to collapse
okay
I also need it please. thanks in advance
Sorry
chryophobia said:
I also need it please. thanks in advance
Click to expand...
Click to collapse
My Alcatel is in assistance for a ROM reset.. When I'll have it again maybe I'll do a ROM dump and upload it..
So wait about 20 days.. I hope ( ****ing assistance >_> )
15-01-2014 and is still in assistance keep waiting..
I have a backup of my ROM
I made a backup of my phone, it's a 4033A, if it's useful for you, I can upload it.
Ty
giovann134 said:
I made a backup of my phone, it's a 4033A, if it's useful for you, I can upload it.
Click to expand...
Click to collapse
It could be a good idea, mabybe the software is the same..
I'm trying to backup mine new 4033D but I always get a error! How u done a backup? via MTK droid tools?
Hope u can understand, my english is so bad~
I made it with CMW
n1osbb2 said:
It could be a good idea, mabybe the software is the same..
I'm trying to backup mine new 4033D but I always get a error! How u done a backup? via MTK droid tools?
Hope u can understand, my english is so bad~
Click to expand...
Click to collapse
I installed CWM using MTK droid tools, then I made my backup. System is the same, difference is your phone is from Europe and mine from Latin America.
giovann134 said:
I installed CWM using MTK droid tools, then I made my backup. System is the same, difference is your phone is from Europe and mine from Latin America.
Click to expand...
Click to collapse
Can u tell me how did u installed CWM? I can't find the compatible image..
Or, if u want, can u upload it? So I'll do a backup and I'll upload it! TY
Edit:
I've installed CWM 5 ad I did a nandroid backup.. It's 1.6GB ( uncompressed ).. So, I'll begin to upload it 31 night (GMT+1) splitted in parts in MEGA or MediaFire.
If someone can test it is better, but it should work!
I made a backup!
n1osbb2 said:
Can u tell me how did u installed CWM? I can't find the compatible image..
Or, if u want, can u upload it? So I'll do a backup and I'll upload it! TY
Edit:
I've installed CWM 5 ad I did a nandroid backup.. It's 1.6GB ( uncompressed ).. So, I'll begin to upload it 31 night (GMT+1) splitted in parts in MEGA or MediaFire.
If someone can test it is better, but it should work!
Click to expand...
Click to collapse
I uploaded it: https://www.mediafire.com/?kbenlbzd5qvi73k
It's only ~200MB 'cause I removed the data partition and I high compress it in a .arc archive. If someone test it let me know if it work pls
n1osbb2 said:
I uploaded it: ...
It's only ~200MB 'cause I removed the data partition and I high compress it in a .arc archive. If someone test it let me know if it work pls
Click to expand...
Click to collapse
Thank you for that n1osbb2;51494733.
I also have a bricked one, it gets stuck at animation. I can boot into stock recovery.
Can someone tell me what I need to do to fix it?
Another idea is if we could change the firmware version number to something lower, then the Alacatel "Mobile Upgrade S" would be essentially forced to overwrite it. Right now it sees my phone's version as up to date and stops there.
So... Is it at all possible to alter the firware version number on the phone?
edit
n1osbb2, could you please take a backup with MTK Droid Root & Tools as well?
You can find it here under Android Software and Hacking General [Developers Only]
kyrastas1 said:
Thank you for that n1osbb2;51494733.
I also have a bricked one, it gets stuck at animation. I can boot into stock recovery.
Can someone tell me what I need to do to fix it?
Another idea is if we could change the firmware version number to something lower, then the Alacatel "Mobile Upgrade S" would be essentially forced to overwrite it. Right now it sees my phone's version as up to date and stops there.
So... Is it at all possible to alter the firware version number on the phone?
edit
n1osbb2, could you please take a backup with MTK Droid Root & Tools as well?
You can find it here under Android Software and Hacking General [Developers Only]
Click to expand...
Click to collapse
Hi, the backup by MTK droid tools fails everytime, I'm trying to debug the error.. If I have sucess I'll upload it.
BTW you can try another methods:
-Flash the CWM using MTK droid tools ( if you want the modified recovery,img I can upload it, or if u want MTK generates the img automatically: there is a guide on google; and then you can flash my backup without user data trought the CWM
If u want CWM make adb works, so you can do a backup of your firmware in order to can come back in the prevoiuos situation if it's needed
OR
-Using the latest version of SP flash tools, u can flash the system.img that u can find in my CWM backup. The latest version have no bugs with the generation of the scatter file, so it could work, but I'm not sure
Sorry for my bad english, I hope you understand..
Let me know if one of this methods works, thank you!
n1osbb2 said:
Hi, the backup by MTK droid tools fails everytime, I'm trying to debug the error.. If I have sucess I'll upload it.
BTW you can try another methods:
-Flash the CWM using MTK droid tools ( if you want the modified recovery,img I can upload it, or if u want MTK generates the img automatically: there is a guide on google; and then you can flash my backup without user data trought the CWM
If u want CWM make adb works, so you can do a backup of your firmware in order to can come back in the prevoiuos situation if it's needed
OR
-Using the latest version of SP flash tools, u can flash the system.img that u can find in my CWM backup. The latest version have no bugs with the generation of the scatter file, so it could work, but I'm not sure
Sorry for my bad english, I hope you understand..
Let me know if one of this methods works, thank you!
Click to expand...
Click to collapse
Thanks for the reply.
Is the modified recovery.img not the one included in the zip you uploaded?
Re the second option, there is no system.img inside - that's the reason I asked for a MTK Droid Root & Tools backup.
The contents of your zip are these:
Code:
.android_secure.vfat.tar
boot.img
cache.ext4.tar
recovery.img
system.ext4.tar
kyrastas1 said:
Thanks for the reply.
Is the modified recovery.img not the one included in the zip you uploaded?
Re the second option, there is no system.img inside - that's the reason I asked for a MTK Droid Root & Tools backup.
The contents of your zip are these:
Code:
.android_secure.vfat.tar
boot.img
cache.ext4.tar
recovery.img
system.ext4.tar
Click to expand...
Click to collapse
I confused the system.ext4.tar with the system.ext4.img
So, I have done half MTK droid backup (it stops when it give me the error, so is not thecomplete backup, but the system.img os ok..) and there is the system image file.. I can upload it 5-04 night (GMT+1) or maybe this night. I'll post the link when it's uploaded.
The firmware of the 4033D have the custpack partiotion too, adn I don't know if it's needed too, so if the flash of system.img fails I'll upload the custpack too
The recovery with CWM is here: https://www.mediafire.com/?bg4rtah9tsbhszs
EDIT: I done a full backup with MTK adn I prepared files for flash tool. I compressed it all in ~460MB archive, t should contain everything. The upload time is the same!
EDIT2 4-3-14 0051 gmt+1: I'm uploading it on Mediafire! It's a high compressed arc archive, so it can drop the pc perfomance while extracting, so have patience
With my connection it wants a lot of time, it say ~8hrs
link rom: https://www.mediafire.com/?1q2k2ppl1qvhvqr
n1osbb2 said:
I confused the system.ext4.tar with the system.ext4.img
So, I have done half MTK droid backup (it stops when it give me the error, so is not thecomplete backup, but the system.img os ok..) and there is the system image file.. I can upload it 5-04 night (GMT+1) or maybe this night. I'll post the link when it's uploaded.
The firmware of the 4033D have the custpack partiotion too, adn I don't know if it's needed too, so if the flash of system.img fails I'll upload the custpack too
The recovery with CWM is here: ...
EDIT: I done a full backup with MTK adn I prepared files for flash tool. I compressed it all in ~460MB archive, t should contain everything. The upload time is the same!
EDIT2 4-3-14 0051 gmt+1: I'm uploading it on Mediafire! It's a high compressed arc archive, so it can drop the pc perfomance while extracting, so have patience
With my connection it wants a lot of time, it say ~8hrs
link rom: ...
Click to expand...
Click to collapse
You aced it! A million thanks!
kyrastas1 said:
You aced it! A million thanks!
Click to expand...
Click to collapse
Of nothing :laugh:
Let me know if it works or if u have troubles with it, TY :good:
Alcatel 4033d Bricked
kyrastas1 said:
Thanks for the reply.
Is the modified recovery.img not the one included in the zip you uploaded?
Re the second option, there is no system.img inside - that's the reason I asked for a MTK Droid Root & Tools backup.
The contents of your zip are these:
Code:
.android_secure.vfat.tar
boot.img
cache.ext4.tar
recovery.img
system.ext4.tar
Click to expand...
Click to collapse
Ive Brick My alcatel 4033d And I Need To Flash It ..Need Help On Doing So .. the phone is not turning on Just show charging light only ..Helllllllllllllp plz
---------- Post added at 01:51 PM ---------- Previous post was at 01:37 PM ----------
n1osbb2 said:
Can u tell me how did u installed CWM? I can't find the compatible image..
Or, if u want, can u upload it? So I'll do a backup and I'll upload it! TY
Edit:
I've installed CWM 5 ad I did a nandroid backup.. It's 1.6GB ( uncompressed ).. So, I'll begin to upload it 31 night (GMT+1) splitted in parts in MEGA or MediaFire.
If someone can test it is better, but it should work!
Click to expand...
Click to collapse
Ive Brick My alcatel 4033d And I Need To Flash It ..Need Help On Doing So .. the phone is not turning on Just show charging light only ..Helllllllllllllp plz
Alecupid said:
Ive Brick My alcatel 4033d And I Need To Flash It ..Need Help On Doing So .. the phone is not turning on Just show charging light only ..Helllllllllllllp plz
Click to expand...
Click to collapse
Full ROM dump (MTKtools): https://www.mediafire.com/?1q2k2ppl1qvhvqr
recovery.img CWM5: https://www.mediafire.com/?bg4rtah9tsbhszs
Nandorid backup without data partition: https://www.mediafire.com/?kbenlbzd5qvi73k
download the mtktools backup ( cause u bricked, so u don't have the CWM, right? ), u have to flash it trough SPflashTools ( http://forum.xda-developers.com/showthread.php?t=1982587 )
PS: use it on your own risks!
n1osbb2 said:
Full ROM dump (MTKtools): https://www.mediafire.com/?1q2k2ppl1qvhvqr
recovery.img CWM5: https://www.mediafire.com/?bg4rtah9tsbhszs
Nandorid backup without data partition: https://www.mediafire.com/?kbenlbzd5qvi73k
download the mtktools backup ( cause u bricked, so u don't have the CWM, right? ), u have to flash it trough SPflashTools ( http://forum.xda-developers.com/showthread.php?t=1982587 )
PS: use it on your own risks!
Click to expand...
Click to collapse
excuse me, im new here this is my first time on this device so totally empty, can you please make an idiots guide on how to get on with this, i have the same problem here stuck at boot screen. i really appreciate it.
Here is some guide as i faced problem to go back once from future 3.0 and the other time i installed drake v1 and it changed to d838 so when i tried to install tot it gave me error like crossDL so i figured it out after alot of search that how to go back to my stock 4.4 and now I want to share this method with you people, it may help some those who are really stuck in there. It's my own effort so if you find it helpful then plz appreciate.. thanks.
Steps to follow:
1. Download Winhex software: https://mega.co.nz/#!IUFnRRBb!JlQpWk_PiQ5NIpE2Pc7y7ovRuv3Fx-slT0A3W7ARpMc
2. Extract it and open it and there will be folder inside winhex. its pre-installed app so you don't need to install it just open folder and run the application and it give some message that you can not save larger file with evaluation version.. just open and click on help and then register option then a dialogue box will be opened and past the key you will find in the main folder text file named with "key". it will be registered version now you can open your tot file and edit it.
3. Open your tot file and click on edit and then on find then search for word "F350" and you will be there. Just change the last word with "L". if you have F350K than K with L and if you have F350S then S with L. if you want to go back from future 3.0 rom and change whole letter with "D838" and remove last digit by putting 00 on left column. you can see the pics for guide.
4. Now save the file and with this file flash your lg g pro 2 and for that i m sure you guys already have guide to flash tot file otherwise you can search for it..
Guide for flashing through tot and dll file:
http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
Note: I am not responsible for any damage do it at your own risk..
amir. said:
Here is some guide as i faced problem to go back once from future 3.0 and the other time i installed drake v1 and it changed to d838 so when i tried to install tot it gave me error like crossDL so i figured it out after alot of search how to go back to my stock and now want to share with you people. It my own effort so if you find out helpful then plz appreciate.. thanks.
Steps to follow:
1. Download Winhex software: https://mega.co.nz/#!IUFnRRBb!JlQpWk_PiQ5NIpE2Pc7y7ovRuv3Fx-slT0A3W7ARpMc
2. Extract it and open it and there will be folder inside winhex. its pre-installed app so you don't need to install it just open folder and run the application and it give some message that you can not save larger file with evaluation version.. just open and click on help and then register option then a dialogue box will be opened and past the key you will find in the main folder text file named with "key". it will be registered version now you can open your tot file and edit it.
3. Open your tot file and click on edit and then on find then search for word "F350" and you will be there. Just change the last word with "L". if you have F350K than K with L and if you have F350S then S with L. if you want to go back from future 3.0 rom and change whole letter with "D838" and remove last digit by putting 00 on left column. you can see the pics for guide.
4. Now save the file and with this file flash your lg g pro 2 and for that i m sure you guys already have guide to flash tot file otherwise you can search for it..
Guide for flashing through tot and dll file:
http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
Note: I am not responsible for any damage do it at your own risk..
Click to expand...
Click to collapse
Can this method be used for my phone which is now on Future ROM, but originally is D838 32GB?
I just need to get the tot file?
There is easy way to go back on stock for d838 model.. Use kdz method..
Secondly i didn't check on d838 model but u can check by using tot file n tot flash method.. Just search for F350L tot file.. I guess its available online.. Then u can try if it works may b it work but i m not sure..
Thirdly its my guess.but u can check if d838 firm can be edited then.edit that file and change it to f350L then use it through kdz method..
But u have to check it at ur own risks..
Sent from my LG-F350K using XDA Free mobile app
amir. said:
There is easy way to go back on stock for d838 model.. Use kdz method..
Secondly i didn't check on d838 model but u can check by using tot file n tot flash method.. Just search for F350L tot file.. I guess its available online.. Then u can try if it works may b it work but i m not sure..
Thirdly its my guess.but u can check if d838 firm can be edited then.edit that file and change it to f350L then use it through kdz method..
But u have to check it at ur own risks..
Sent from my LG-F350K using XDA Free mobile app
Click to expand...
Click to collapse
From what @orsonwang posted, his phone goes to bootloop when flash using kdz.
Your guide, I can get F350 tot file and change the hex to D838? I have found a working F350S v10e tot file and DLL. Can I use these file?
xb360 said:
Can this method be used for my phone which is now on Future ROM, but originally is D838 32GB?
I just need to get the tot file?
Click to expand...
Click to collapse
Here is link of tot file for F350L:
https://www.fshare.vn/file/TVR9DPAC7T
for dll file you can use any variant dll file because it is common for all K/L/S..
xb360 said:
From what @orsonwang posted, his phone goes to bootloop when flash using kdz.
Your guide, I can get F350 tot file and change the hex to D838? I have found a working F350S v10e tot file and DLL. Can I use these file?
Click to expand...
Click to collapse
yes orsonwang eventually did the same tot method to get his phone back that give more confidence in this method. you can check this as this modification works for all tot files.. if it works i hope it will go beyond 80% and then its ok even at the end it gives error on flash tool because in my experience it didn't able to make to 100% not even a single time but it worked for me.. you can check if didn't start flashing then you have you current at least and if it started then hopefully it will go beyond 80% and i hope it will work but not confirmed you have to make your own mind to take risk as i have no such experience i am just guessing it might work..
Best of Luck..
amir. said:
yes orsonwang eventually did the same tot method to get his phone back that give more confidence in this method. you can check this as this modification works for all tot files.. if it works i hope it will go beyond 80% and then its ok even at the end it gives error on flash tool because in my experience it didn't able to make to 100% not even a single time but it worked for me.. you can check if didn't start flashing then you have you current at least and if it started then hopefully it will go beyond 80% and i hope it will work but not confirmed you have to make your own mind to take risk as i have no such experience i am just guessing it might work..
Best of Luck..
Click to expand...
Click to collapse
It only goes till 80%, but the phone still able to boot up?
xb360 said:
It only goes till 80%, but the phone still able to boot up?
Click to expand...
Click to collapse
no it went beyond 80 but didn't complete 100.. it normally went to 92 to 93.. but once phone rebooted by itself then it should be ok..
Back to Stock
amir. said:
no it went beyond 80 but didn't complete 100.. it normally went to 92 to 93.. but once phone rebooted by itself then it should be ok..
Click to expand...
Click to collapse
Hy !
Please help me. My device is D838. I installed the "Future_V3.1_Lollipop".
How can'i revert back to STOCK D838 ?
I have D838.tot but when I try to flash it back, there is a many error messages.
I edited the build.prop to correct anything in it.
KDZ not work, only hope is the TOT method.
Please help me !
THX !!
LorinczG77 said:
Hy !
Please help me. My device is D838. I installed the "Future_V3.1_Lollipop".
How can'i revert back to STOCK D838 ?
I have D838.tot but when I try to flash it back, there is a many error messages.
I edited the build.prop to correct anything in it.
KDZ not work, only hope is the TOT method.
Please help me !
THX !!
Click to expand...
Click to collapse
Are you using the correct DLL file?
Try this DLL file: http://forum.xda-developers.com/showpost.php?p=58628114&postcount=32
This is for 32GB phone.
Your tot file is original D838 or modified from F350?
Maybe you want to try this to file, it's from TW 10D 32GB
http://forum.xda-developers.com/showpost.php?p=58628087&postcount=31
Then just follow the steps from the guide on 1st post
http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
I did mine with both these files and that guide, flashed without problem.
amir. said:
Here is some guide as i faced problem to go back once from future 3.0 and the other time i installed drake v1 and it changed to d838 so when i tried to install tot it gave me error like crossDL so i figured it out after alot of search how to go back to my stock and now want to share with you people. It my own effort so if you find out helpful then plz appreciate.. thanks.
Steps to follow:
1. Download Winhex software: https://mega.co.nz/#!IUFnRRBb!JlQpWk_PiQ5NIpE2Pc7y7ovRuv3Fx-slT0A3W7ARpMc
2. Extract it and open it and there will be folder inside winhex. its pre-installed app so you don't need to install it just open folder and run the application and it give some message that you can not save larger file with evaluation version.. just open and click on help and then register option then a dialogue box will be opened and past the key you will find in the main folder text file named with "key". it will be registered version now you can open your tot file and edit it.
3. Open your tot file and click on edit and then on find then search for word "F350" and you will be there. Just change the last word with "L". if you have F350K than K with L and if you have F350S then S with L. if you want to go back from future 3.0 rom and change whole letter with "D838" and remove last digit by putting 00 on left column. you can see the pics for guide.
4. Now save the file and with this file flash your lg g pro 2 and for that i m sure you guys already have guide to flash tot file otherwise you can search for it..
Guide for flashing through tot and dll file:
http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
Note: I am not responsible for any damage do it at your own risk..
Click to expand...
Click to collapse
I was on Drake v1 and i flashed 4.4 rom after that phone is giving security error at boot. I downloaded tot and dll for my ph (F350s) and following your above mentioned post i edited F350s to D838 but still i am getting cross dl error. Any help pl?
Ahmed Xperia p said:
I was on Drake v1 and i flashed 4.4 rom after that phone is giving security error at boot. I downloaded tot and dll for my ph (F350s) and following your above mentioned post i edited F350s to D838 but still i am getting cross dl error. Any help pl?
Click to expand...
Click to collapse
Did u delete "S" from F350S??
amir. said:
Did u delete "S" from F350S??
Click to expand...
Click to collapse
yes id deleted S by putting 00 on left column
Should i use dll file for D838?
Ahmed Xperia p said:
yes id deleted S by putting 00 on left column
Should i use dll file for D838?
Click to expand...
Click to collapse
yes.. u should use dll for d838.. once i faced that..
amir. said:
yes.. u should use dll for d838.. once i faced that..
Click to expand...
Click to collapse
i have downloaded dll for 8d38 but not sure it's for 16 g or 32 g. Will it make any difference? If possible send me dll you flashed. Thanks
Update: Tried using D838 Dll but same error
PS: I am on windows 8.1 if this makes difference
---------- Post added at 11:27 AM ---------- Previous post was at 11:12 AM ----------
DL upgrade or Board Dl
I figured out there are these options on lg flashtool. By default upgrade dl is selected. Do i need to select board dl?
Ahmed Xperia p said:
i have downloaded dll for 8d38 but not sure it's for 16 g or 32 g. Will it make any difference? If possible send me dll you flashed. Thanks
Update: Tried using D838 Dll but same error
PS: I am on windows 8.1 if this makes difference
---------- Post added at 11:27 AM ---------- Previous post was at 11:12 AM ----------
DL upgrade or Board Dl
I figured out there are these options on lg flashtool. By default upgrade dl is selected. Do i need to select board dl?
Click to expand...
Click to collapse
bro i m using windows 7 and i m not sure if that is the case.. anyhow i am attaching dll file..
amir. said:
bro i m using windows 7 and i m not sure if that is the case.. anyhow i am attaching dll file..
Click to expand...
Click to collapse
Didint get dll file bro
Ahmed Xperia p said:
Didint get dll file bro
Click to expand...
Click to collapse
I guess this time I have attached it..
amir. said:
I guess this time I have attached it..
Click to expand...
Click to collapse
Thanks but i solved my problem my eidting and flashing kdz
Sent from my LG-D838 using XDA Free mobile app
Ahmed Xperia p said:
Thanks but i solved my problem my eidting and flashing kdz
Sent from my LG-D838 using XDA Free mobile app
Click to expand...
Click to collapse
Good nice to hear that..
So I just got the Aristo 3 and wanted to root it. after an extensive search I have come up empty. Does anyone know if there is a method available to use yet or maybe something is in the works? I've unlocked flashing but I cant seem to boot recovery. Any help would be greatly appreciated.
Same ive spent about 6 hours researching this ive never built my own root before however i just dont have the time to do whats needed. From what i researched get the original boot rom from lg bridge and perform a restore to download the factory boot image then use magisk to rebuild the image
Nvitethedark said:
Same ive spent about 6 hours researching this ive never built my own root before however i just dont have the time to do whats needed. From what i researched get the original boot rom from lg bridge and perform a restore to download the factory boot image then use magisk to rebuild the image
Click to expand...
Click to collapse
Hmm I'll give it a try. The phone is still new enough that I don't have much saved to it and if I brick it can take it back
should be able to just get the boot image may be the aristo 2 dev would pick this up since he's familiar with it I see you have a few posts in that forum maybe you can send that dev a message see if they would pick it up.
I eagerly await any progress in this run! My girlfriend cracked her screen on her Aristo 2 and decided that it was time to upgrade. I've never been disappointed in the idea of upgrading my phone...until it meant giving up my Aristoboy Mk.2(which was/is quite formidable)and rooted status along with it. If there is anything I might read about the process online, I would at very least consider the task myself. I am learning, but I have some decent skills and experience behind me. Please let me know if I can assist in any way. If not, I hope to see the first strides towards tackling this latest addition to the Aristo line!
My thanks to all my fellow devs here! You each make up a piece of the whole collection that make this, hands down the best forum/online community available the world over! Keep it up! We are making a difference in so many lives!
Your friend,
~[ProTech]~
So I've been busy as **** lately, but I found that the issue seems to be with the os more than the phone itself. I'm not that proficient with downgrading the os to a earlier version since this phone came stock with Oreo. I will try and talk to some of the devs who did the aristo 2 x210ma. Hopefully they have a solution. I've been using my 2 instead. I never realized how much you can't do with a stock phone and os.
OK here's something you can try...
first get dev-patched LGup {GooGle It}
then use the Dump function of Lgup to dump All partitions from your fone...
look for boot_COM{some#here} and rename it to boot.img
put that file on your fones sdcard and install magisk manager app.
use magisk manager app to patch that boot.img file.
find the new file patched_boot.img whereever magisk put it on your sdcard...
move it to your desktop or a folder etc. on P.C
now try to flash it to your fone...
Code:
adb reboot bootloader
Code:
fastboot oem unlock
if that works your bootloader is now unlocked you'll have to reboot the fone once as it'll erase cache and data...
after that
again do
Code:
adb reboot bootloader
now try
Code:
fastboot flash boot patched_boot.img
if that works....
Code:
fastboot reboot
and you'll have root by magisk.
if fastboot's not working other option is to rename "patched_boot.img" to "boot.img"
and then use Partitions DL option in lgup to flash the "patched"boot.img to the phone...
if that works you'll have root by magisk...
If this helped you feel free to hit thanks and come back to post the results plz.
Thanks
LgPWN'd said:
OK here's something you can try...
first get dev-patched LGup {GooGle It}
then use the Dump function of Lgup to dump All partitions from your fone...
look for boot_COM{some#here} and rename it to boot.img
put that file on your fones sdcard and install magisk manager app.
use magisk manager app to patch that boot.img file.
find the new file patched_boot.img whereever magisk put it on your sdcard...
move it to your desktop or a folder etc. on P.C
now try to flash it to your fone...
Code:
adb reboot bootloader
Code:
fastboot oem unlock
if that works your bootloader is now unlocked you'll have to reboot the fone once as it'll erase cache and data...
after that
again do
Code:
adb reboot bootloader
now try
Code:
fastboot flash boot patched_boot.img
if that works....
Code:
fastboot reboot
and you'll have root by magisk.
if fastboot's not working other option is to rename "patched_boot.img" to "boot.img"
and then use Partitions DL option in lgup to flash the "patched"boot.img to the phone...
if that works you'll have root by magisk...
If this helped you feel free to hit thanks and come back to post the results plz.
Thanks
Click to expand...
Click to collapse
My bootloader is already unlocked I've just not been able to flash anything with fastboot. So I have LGup, is there a difference with the dev patched one? I also have magisk on my phone, but it really doesn't give me any options besides to install a new version. I'm gonna go try your suggestion soon though...it sounds promising...and may open up other options if this doesn't succeed. Thanks I'll keep you posted.
Reckless459 said:
My bootloader is already unlocked I've just not been able to flash anything with fastboot. So I have LGup, is there a difference with the dev patched one? I also have magisk on my phone, but it really doesn't give me any options besides to install a new version. I'm gonna go try your suggestion soon though...it sounds promising...and may open up other options if this doesn't succeed. Thanks I'll keep you posted.
Click to expand...
Click to collapse
PLease let us know how it go's...
I'm trying to port and compile Multi-rom for LG-aristo Lg-m210 at the moment...
So I have LGup, is there a difference with the dev patched one?
.
Click to expand...
Click to collapse
in answer to that YES quite a difference...
devpatched lgup gives you extra options such as Dump and Partitions-DL and Chiperase among others...
you'll NEED that dump and partitions-DL option....
LgPWN'd said:
PLease let us know how it go's...
I'm trying to port and compile Multi-rom for LG-aristo Lg-m210 at the moment...ll
Click to expand...
Click to collapse
So I can't get passed the dump. I keep getting a timed out error. I even tried to format the user data using fastboot and it failed. And I am curious about the boot_COM. I didn't see any file in the partition list matching that. I did see the boot partition and many others that I didn't recognize. So kinda feeling that we are back to
Reckless459 said:
So I can't get passed the dump. I keep getting a timed out error. I even tried to format the user data using fastboot and it failed. And I am curious about the boot_COM. I didn't see any file in the partition list matching that. I did see the boot partition and many others that I didn't recognize. So kinda feeling that we are back to
Click to expand...
Click to collapse
No the file wont say that in lgup, it'll be named that after you create a new folder on desktop call it "Dump" then use the dev-patched lgup and Dump option, select the folder Dump on the desktop and select the little checkbox for all on partitions list and click start...
also you may be haveing issues because of the .dll your useing... will lgup flash a stock .kdz to the device?
if yes, I'd think the dump option would work fine...
for firmware look here : https://www.mylgphones.com/metropcs-lg-aristo-3-lmx220ma-x220ma-firmware.html
for direct download use this link
Code:
http://pkg02.lime.gdms.lge.com/dn/downloader.dev?fileKey=FW88KEQ4C2VSAF0C3D54FH4/X220MA10e_00_MPCS_US_OP_0123.kdz
LgPWN'd said:
No the file wont say that in lgup, it'll be named that after you create a new folder on desktop call it "Dump" then use the dev-patched lgup and Dump option, select the folder Dump on the desktop and select the little checkbox for all on partitions list and click start...
also you may be haveing issues because of the .dll your useing... will lgup flash a stock .kdz to the device?
if yes, I'd think the dump option would work fine...
for firmware look here : https://www.mylgphones.com/metropcs-lg-aristo-3-lmx220ma-x220ma-firmware.html
for direct download use this link
Code:
http://pkg02.lime.gdms.lge.com/dn/downloader.dev?fileKey=FW88KEQ4C2VSAF0C3D54FH4/X220MA10e_00_MPCS_US_OP_0123.kdz
Click to expand...
Click to collapse
So yes it would load a stock formware but no it wouldn't allow me to dump even one partion. And the strange thing was that my list of options would chanhe sometimes. Like it would give me more options i.e. phonesettings. I even tried different cables and ports. It doesnt matter though i somehow hard bricked it so bad that it won't even. Boot to download mode and somehow fried my sim card to the point it wont work in any other phone. Im just waiting for metro to open so i can try again
Reckless459 said:
So yes it would load a stock formware but no it wouldn't allow me to dump even one partion. And the strange thing was that my list of options would chanhe sometimes. Like it would give me more options i.e. phonesettings. I even tried different cables and ports. It doesnt matter though i somehow hard bricked it so bad that it won't even. Boot to download mode and somehow fried my sim card to the point it wont work in any other phone. Im just waiting for metro to open so i can try again
Click to expand...
Click to collapse
OH WOW what a mess...
I would say it's the .dll in the LGUP causing pain here...
something you can try when you're ready to try again....
remove/uninstall devpatched LGUP and install regular store version
use the Common .dll
and add this file{ UI_Config.lgl } to your Common folder in the lgup install location ...
to make it easier I'll just zip up My common folder for you to replace yours
to do this
right click on lgup, select open file location...
navigate to the model subfolder you'll see things like
{ AllinOne } {Common} and {LGUP_LGNPST} folders...
at that point just right click and rename {Common} folder to {Commonbak},
then take my zip file I'm attaching and unzip it and inside will be Common folder...
just Copy / Paste that new Common folder to where the old one is..
set permissions of folder { read-only} and open the folder find file called { UI_Config.lgl }
and set it's permissions to READ ONLY . otherwise it'll be erased once you start LGUP.
and see If that changes anything with being able to Dump...
It's let me dump every LG i've plugged into it...
so I should think it should work for you too...
@Reckless459
is there nothing further?
LgPWN'd said:
@Reckless459
is there nothing further?
Click to expand...
Click to collapse
Dude...
First off let me say MertoPCS has the biggest pile of **** customer care department. I'm still waiting on my new device to comr from the warrenty department. I did however fix the sim issue (again metro sucks leaky bowels). I will definitely post any new developments as soon as the happen.
Oh also i did a dump on another phone (aristo 2) and had no issuses. And i saw what ypu meant with the boot_COM##. Thanks for the help.
LGUP dll
Sorry apparently i haven't reloaded this page in 12 hrs and their has been progressing i have 2 aristos im going to work on this also.
i will step in and help out ill read the updates and post further
---------- Post added at 09:43 PM ---------- Previous post was at 09:35 PM ----------
LgPWN'd said:
@Reckless459
is there nothing further?
Click to expand...
Click to collapse
I had a question i would like to chime in here, can i do an extraction on the KDZ with lg extractor i see a boot image in it and flash that?
Nvitethedark said:
Sorry apparently i haven't reloaded this page in 12 hrs and their has been progressing i have 2 aristos im going to work on this also.
i will step in and help out ill read the updates and post further
---------- Post added at 09:43 PM ---------- Previous post was at 09:35 PM ----------
I had a question i would like to chime in here, can i do an extraction on the KDZ with lg extractor i see a boot image in it and flash that?
Click to expand...
Click to collapse
it may work,
when lgup is being a pain it's worth a try.
I say go for it. but to be certain I'd try flashing the extracted boot.img with partitions DL option in lgup once to make sure it flashes it b4 trying to patch it and flash it again...
Just my 2 cents.
LgPWN'd said:
it may work,
when lgup is being a pain it's worth a try.
I say go for it. but to be certain I'd try flashing the extracted boot.img with partitions DL option in lgup once to make sure it flashes it b4 trying to patch it and flash it again...
Just my 2 cents.
Click to expand...
Click to collapse
Aristo3 FW: X220MA10B "10b" came on the system stock
LGUP V1.14 - patched
DLL v1.0.28.17
The above dll is the only one I have found that will recognize the phone and load LGUP, I have also attempted to use uppercut: Error DLL for X220M10b is invalid install a valid dll
https://imgur.com/1Ptrv3n
however, once i attempt to dump phone reboots into download mode i get: Error: 0x2000, please use latest Dll LAF protocol version is not match dll=0 device 162512928
https://imgur.com/5I7GfOa
I attempted to use the LGUPC DLL from the kdz V 10E firmware and that did not recognize the device i also attempted to use your zipped commons.
any feedback on this?
I feel that i should use LG tool update to 0F then use the 0F kdz to attempt all this?
DOWNGRADE Don't UPGRADE
Nvitethedark said:
Aristo3 FW: X220MA10B "10b" came on the system stock
LGUP V1.14 - patched
DLL v1.0.28.17
The above dll is the only one I have found that will recognize the phone and load LGUP, I have also attempted to use uppercut: Error DLL for X220M10b is invalid install a valid dll
https://imgur.com/1Ptrv3n
however, once i attempt to dump phone reboots into download mode i get: Error: 0x2000, please use latest Dll LAF protocol version is not match dll=0 device 162512928
https://imgur.com/5I7GfOa
I attempted to use the LGUPC DLL from the kdz V 10E firmware and that did not recognize the device i also attempted to use your zipped commons.
any feedback on this?
I feel that i should use LG tool update to 0F then use the 0F kdz to attempt all this?
Click to expand...
Click to collapse
If at all posible find the OLDEST firmware possible in kdz and do a full flash of that .
and try your dll mod with that by extracting the dll from said kdz and renaming to what ever the one in Common folder is and keep the UI_Config.lgl in there to keep the extra options if possible...
It's all trial and error with this stuff, so keep at it.
DO NOT flash a firmware.kdz from a different model of the device as it'll flash aboot sbl etc and you'll end with a brick that can't be fixed.
and I've always liked { in my experiments} to use the partitions DL option even when downgrading etc to be able to NOT CHOOSE the boot-stack partitions...
but give it a shot and tell us how it go's.
we may be able to split a root-bounty if we come up with something working across users
LgPWN'd said:
OH WOW what a mess...
I would say it's the .dll in the LGUP causing pain here...
something you can try when you're ready to try again....
remove/uninstall devpatched LGUP and install regular store version
use the Common .dll
and add this file{ UI_Config.lgl } to your Common folder in the lgup install location ...
to make it easier I'll just zip up My common folder for you to replace yours
to do this
right click on lgup, select open file location...
navigate to the model subfolder you'll see things like
{ AllinOne } {Common} and {LGUP_LGNPST} folders...
at that point just right click and rename {Common} folder to {Commonbak},
then take my zip file I'm attaching and unzip it and inside will be Common folder...
just Copy / Paste that new Common folder to where the old one is..
set permissions of folder { read-only} and open the folder find file called { UI_Config.lgl }
and set it's permissions to READ ONLY . otherwise it'll be erased once you start LGUP.
and see If that changes anything with being able to Dump...
It's let me dump every LG i've plugged into it...
so I should think it should work for you too...
Click to expand...
Click to collapse
reinstalled a non-patched version of lgup and used your common folder and set read-only options attempted a dump got this:
https://imgur.com/FJPMUwv
If you find anyway to fix a G7 Power hard brick please someone let me know my model is XT1955-5 (ocean) Amazon
I just bought the phone but now I can't use it anymore I have no access to the bootloader or recovery mode.
The phone plugged into the computer shows up as Qualcomm HS-USB Loader (9008)
I along with other users with the phone on XDA have tried using a mmcblk0.img but sadly it never worked if you find some other method please let someone know on this thread or make a post about it.
Thank you have a good day.
@sd_shadow
Do you think you could try this please and then upload the file?
I believe we have the same phone model the file shouldn't be very big someone uploaded one for the G7 and it was 165MB.
masonw1999 said:
@sd_shadow
Do you think you could try this please and then upload the file?
I believe we have the same phone model the file shouldn't be very big someone uploaded one for the G7 and it was 165MB.
Click to expand...
Click to collapse
The instructions you posted pull a 16gb file.
The G7 Power is a 32gb device.
I've pulled an mmcblk0.img 3 times, using the twrp method.
Not sure what happened the 1st time, the 2nd and 3rd md5 checksums matched.
I couldn't get the sd card method to work, tried several times.
sd_shadow said:
The instructions you posted pull a 16gb file.
The G7 Power is a 32gb device.
I've pulled an mmcblk0.img 3 times, using the twrp method.
Not sure what happened the 1st time, the 2nd and 3rd md5 checksums matched.
I couldn't get the sd card method to work, tried several times.
Click to expand...
Click to collapse
I would pull it using Linux (not a virtual machine) directly to your hard drive as apposed to using twrp to pull it to an sd card
masonw1999 said:
@sd_shadow
Do you think you could try this please and then upload the file?
I believe we have the same phone model the file shouldn't be very big someone uploaded one for the G7 and it was 165MB.
Click to expand...
Click to collapse
Try this
165mb file
https://mega.nz/#!uOpw3AYI!rDXW5rN9LQ4E7mWglOo-HQZY1AWG5914Jp75ijyY1Fo
edit:
some details
if you use
Code:
dd if=/dev/block/mmcblk0 of=/sdcard/Loader.img bs=1024 count=168960
file is saved to internal staorage
command needs to to changed
I used
Code:
dd if=/dev/block/mmcblk0 of=/storage/16F4-E1F2/Loader.img bs=1024 count=168960
but this will be different on every device.
I just used the stock files app to see the details of a file on the external storage to check location.
/storage/16F4-E1F2/
@sd_shadow
Thank you for doing that for me man appreciate it I think I'm just going to throw the phone in the garbage it didn't work.
)':
This blank flash unbricked my phone: https://mega.nz/#!5NtCia6a!epk2yLEqnQBKEwT2QbQaOe8-4675pfj76Hs7pC5kbQE
anyone know how to extract a boot.img file so I can use the contents on the inside in windows please
gigawatt said:
anyone know how to extract a boot.img file so I can use the contents on the inside in windows please
Click to expand...
Click to collapse
Boot.img is in the full firmware
https://mirrors.lolinet.com/firmware/moto
Sent from my mata using XDA Labs
hello does anyone have the blank flash for the february 2020 patch?
https://www.clansoft.net/dl/index.php?a=downloads&b=file&id=9858
hope has just come out, but you have to pay