I'm about to buy a GPS receiver from eBay (new), but I'm not too sure on the "magnetic windscreen mount" that comes with it.
Most of the time, you should keep magnets away from electronic devices due to the damage they can cause, but in this scenario should I be concerned?
I had a magnetic holder for my old MP3 player and it caused one of the components to lift far enough off the PCB for it to lose contact. I will admit though, the magnet I had was obviously too powerful - the casing on the back of the MP3 player used to bend outwards. I just can't afford any damage to happen to my XDA 2.
I got a TomTom kit from ebay arrived today (purchased from Uncle_sam) the holder is very flimsy, it broke in my hand and is now useless. I was also supposed to receive a leather case, clip and speed camera detector BUT NOTHING.
Beware this seller!!!!
Having said that the TomTom is pure excellence.
Matt
I have ysed the magnetic holders with xda1 and xda2, works perfectly, just a small very thin plate of metal sticks to te back of the xda and it holds firmly to the magnetic mount on the windscreen, I have had no adverse effects and in my view this is one of the best ways of mounting a pda, the bonus with the xda2 is that you can film stuff from the car as you go along.
Where did you get the magnetic holder from?
Hi,
I brought a magnetic holder at the same time i brought my GPS mouse and chargeing lead from PDAMODS.COM
The magnetic holder is excelent. I have been using it for a long time. As metoined above you get a little metal plate to stick to the back of your device so it has something for the magnet to stick to. However i thought sticking it on the back may make it look a bit ugly. I instead removed the sticky coating and put it under the battery cover. I had to just make it a bit narrower by rubbing it on a knife sharpening stone. This let it fit perfectly and the XDA II looks no different.
The good thing about the mag mount is it is very small and compact, and very quick and easy to place and remove the XDA II.
Thanks for the info - I think I'll treat myself to one of those.
pasive magnets dont kill eletronics like eletro magnets does
because of 2 things
they are in general not as strong
and their field dont variate like electromagnets does
links about magnets
http://www.dansdata.com/gz009.htm
http://www.dansdata.com/magnets.htm
I use this mount ......
http://www.gpsw.co.uk/details/prod1313.html
It's absolutely excellent !! and at £10 who can grumble!! I bought two, one for my wifes car as well!
Thats the one i have to and its cheaper than pdamods.com.
Another thing i forgot to mention in my earlier post is the suction is really good. I know a lot of suction mounts can have problems with falling off but this one has never done that yet to me
Wow, thanks for that. I might just do the same.
and there was me thinking that lith-ion batteries can be damaged by magnetic holders??
If you are unfamiliar with Brodit products, let me first explain how they work.
You buy two parts, the 'Proclip' which is specific to your car, and a holder which is specific to your phone.
The ProClip locks into the joins around the trim of your dash meaning no screwing, sticking or suckering but ensuring a rock solid fix. This is why you buy a specific one for your vehicle as all dash trims are different.
The holder is designed exactly (and I mean exactly) for the phone, again ensuring a snug and secure fitment. The holder screws into the proclip with supplied self-tapping screws and you end up with a very secure overall unit. The added benefit is that if you change car, you need only change the proclip, and if you change phone, just the holder.
Brodit offer passive and active holder, the difference being whether or not they have a charger built in. I went for the active holder for my Nexus One and the fit is perfect. You slide the phone in from the top and the waiting usb charging plug lines up so perfectly it just slides straight in. It's quite erotic
The holder can be tilted to allow landscape or portrait use and an adjustment screw in the middle dictates how tight this movement is. The charger is a simple cigarette lighter plug but has an attractive blue lightening bolt light on it when it's plugged in.
The build quality on Brodit parts are second to none and the made-to-measure design ensures they fit far more snugly and securely than any universal part is ever going to manage, plus you have no fear of having to drill holes in your dash or leave sticky residue. They often have several proclips available for each car to give you flexibility on placement, plus the holders can be angled fairly flexibly so you always get a good position, handy if you use it for sat nav etc.
They are very stable so you can poke away at the screen without pushing the phone around in the holder or messing up your viewing angle.
I have had 3 different cars and 5 different phones since I first discovered Brodit and always use them.
The only drawback is the price. They are not the cheapest because of the relatively high cost of making them to measure. I believe they are worth the cost, especially if you use your phone in the car a lot (for music, satnav etc).
In the UK, they sell here: http://www.dsldevelopments.com/
Rest of the world, go via here: http://www.brodit.com/
Actually the US dealer is: http://www.proclipusa.com/
I have one in my car and it is hands down the best mount available.
Hi,
I searched a long time for a good car holder. Now I bought the brodit active holder and want to give you some feedback on it.
Positive:
- Build quality is very good. The plastic doesn't look cheap but very good.
- Despue the fact that the brodit holders are not glued or drilled to the dashboard, it's very very stable.
- The holder is active, that means if you push it in into the holder it gets energy
- The cable to the cigarette plug and the plug itself is looking good as well. A little light on the plug is showing that energy is.
- The car specific part can be fixed without drilling. So in a leasing car you can remove it after some years again.
- Inserting and removing the phone is easy. It's not to tight and not to loose, just perfect.
Interesting to know:
- I read that the brodit car holders a consisting of two parts, the car specific part and the device specific part and therefore you can switch the holder between the cars. That doesn't work as I expected because the device specific part and the car specific part are connected with a screw. So you can't easily take it to car A today and car b tommorow.
- The same applies to the orientation of the phone. Landscape is possible. But you have to open the screw with a scredriver. Adjust the holder as you like it and thight the screw again. You won't change it from day to day or even during the drive.
Edit 01/31/2011: Both is probably possible if you have the right extra parts from Brodit. Thanks for your feedback guys.
Negativ:
- There is a "open area" for the headspeaker plug in the holder frame. But this one has to little tolerance (or HTC changed the dimensions of the phone). I couldn't insert the plug. It's not important for me as I have a bluetooth connection to my auto radio.
Summary:
I would buy it again. It's a bit expensive (ca. 75 EUR for both parts of the holder) but worth the money as I haven't find something comparable.
Any chance of some pictures to see it in action? im after a car holder aswell
Good one
Brodit are the best car holders in my opinion i use them for years now and in different cars never had any problems whit them it wont fell of the fit is perfect if you get the right part to place it in your car they made for every car its own part so look out you get the right part for you brand and type of car
Regards Wielo
Yu cannot movt from car to car because you have to fasten the holder to the clip with screws. But you can buy 1 clip for each car and buy the removable adaptors (I don't remember how they call them, something like clip & move) so that you can easily transfer to different cars.
Orientation: not true, you can just rotate and move at any angle you like.
Charger: bad thing is that it is not recognized as dock which would be very nice to have.
Also, I received one which was very tight for the phone, so tight that I couldn't take the phone out of it and most times, the sim cover would get off and stay in the cradle. I received a replacement which seems to have been altered to allow more room for the phone. If you have similar case, you should request replacement from brodit directly since resellers deny the issue.
Some picture would be really helpful!
I am looking to go Brodit's way - I particularly like the option of the molex connector for getting direct power from the power, thus hiding cables! The price though is kind of heavy...
Regarding the picture, you can see it pretty good on that site. Go with the mouse over the small pictures:
http://www.gps-haus.de/Zubehoer-n-H...nzuenderkabel-fuer-HTC-Desire-HD::104540.html
Regarding the "moving it from one car to another". You are right. There are some extra parts that can be bought.
Regarding the orientation, you may be right as well. I didn't know that there is that much extra parts you can buy. There is probably one that allows it. With my solution it's not possible. At the moment I am a bit overwhelmed how many extra parts there are. It's difficult to know which one is good for what.
andreasy said:
Charger: bad thing is that it is not recognized as dock which would be very nice to have.
Click to expand...
Click to collapse
That's not a big problem for me. I use tasker in order to configure/control the phone. If the bluetooth connection to my radio is connected, I have a trigger to do whatever I want.
I have used my CraigsDocks car dock for a little over a month now and I could not be more pleased with it's functionality.
As I stated on another thread about car mounts what kind of mount you get is totally dependent on your vehicle's interior and where you want the phone. I don't want my phone on the top of the dash and I tried an Arkon vent mount with the N4 in my previous vehicle that didn't work because of the weight. It vibrated on rougher roads causing the screen to reflect.
The first thing I want to address is the cost which is $70-100 depending on which options you order. Mine has a custom made base plate to accommodate mounting it exactly where I wanted it and that additional cost is quoted after you've supplied measurements & pictures. It is dependent on the amount of custom fabrication necessary. I'm guessing most users won't need a custom fabricated base plate. This unit is hand made by Craig himself and is not a mass production product. It's probably the most expensive car mount/dock on the market however it is also the last one you will ever buy because it is universal for both the vehicle & the phone (with or w/o case and/or extended battery). There is nothing to wear out as there is no plastic or springs. The entire mount is hand milled aluminum and the adjustments are threaded with set screws. The quality is exactly what you would expect for the cost & IMO the design is as much modern industrial art as it is pure functionality.
Before purchase I was comparing it to a ProClip mount which was about $60 but the ProClip didn't have the dock functionality and it was both vehicle & phone specific. Considering I get a new phone every 2 years & a new vehicle every 3 years in a fairly short time span I'd have spent more for way less functionality if I'd purchased the ProClip instead.
This is not only a superb mount it is also a dock meaning that when I insert my phone the modified mini USB>USB cable automatically triggers the phone's native car dock app whether the cable is plugged in to my 12v car adapter or not. On my phone I have the Car Home Ultra (CHU) app installed which is automatically triggered by the phone's native car dock app so without any screen input from me I have Car Home Ultra open on the phone every time I insert it in the dock. The only time I have to use screen input is if the screen is locked and I use the fingerprint scanner. So instead of having to set up the phone every time I get in the car it has the screen always on with CHU and provided I've got the cable plugged in to the 12v adapter it's always fully charged/charging. To me this functionality is a phenomenal step up in the car. I know the CraigsDocks mount isn't the only one that has a dock feature but I think there are only a couple of others.
My mount has the ball mount tilt + swivel option and the combination of that and the custom fabricated base plate put the phone exactly where I wanted it. I think my interior is about as difficult as it gets to mount a phone the size of the N4 and have it no further away than my right steering column stalk controls without blocking other screens/controls/air vents. The location is so functional it is actually easier for me to use the CHU digital speedometer on the phone than to read the car's speedometer. Considering I use my phone primarily for business it's important for me to be able to see who's calling/make calls/conference calls looking away from the road as little as possible & I just don't like an on the top of the dash mount. The CraigsDocks mount/dock is available with a suction cup or windshield extension for those that prefer those locations.
So on a 1-10 scale I rate the CraigsDocks mount dock a clean 33!! I absolutely love it. To me it was money well spent because I don't know how I could make my phone any more functional in the car than it is & it's located exactly where I wanted it. On top of that I never have to buy another car mount. Thanks Craig!!
http://www.craigsdocks.com/samsung-galaxy-s3-s4-s5-note-3-4-car-dock/
BTW, I'm using an Otterbox Defender case. These pictures show it w/ the Otterbox plastic screen cover & an iCarez glass protector. Since they were taken I've removed the Otterbox protector & installed a Zagg HDX.
Other thing I want to mention is the CHU screen shown in the pictures is not my home CHU screen because that one has sensitive info on it. I highly recommend the Car Home Ultra app too. I have mine set to turn off Wi-Fi which I'm always forgetting to do and make the phone's home screen button default to my CHU homepage.
Has anyone lucked out and managed to find a car holder for the Z5C?
Been looking around without success.
http://www.proclipusa.com/phone-holders/device/sony/xperia-z5-compact.cmsv in USA
http://www.brodit.com/productList.html?brand=Sony&model=Xperia+Z5+Compact&pn=prod in Europe
I used their product with my last phone and it was a very nice and clean solution. Not affiliated in any way with them...
moonbaywalk said:
Has anyone lucked out and managed to find a car holder for the Z5C?
Been looking around without success.
Click to expand...
Click to collapse
I use this holder: http://www.amazon.com/gp/product/B00R0MELU6?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00
It is not made specifically for the Z5C. And the one major drawback for some people is that you have to put a permanent metal plate on the back of your phone. For that reason, I have added a Balolo wooden back. The metal plate is attached to the wood, allowing me to remove the plate (actually, the wood) without damage to the phone. The Mountek advertising says you can simply put the unattached metal plate between the phone and a typical case. However, with a previous phone I found that there's just enough movement of the metal to scratch the back of the phone, so I don't recommend that approach.
This is not the perfect answer, but after trying many different car phone holders I have been most satisfied with the Mountek. The magnet does a super job, even on the back country roads in Costa Rica. Mountek is planning to release an air vent version by the end of December, if the CD version doesn't work for you (or you use your CD player).
Hope this helps.
weasal said:
http://www.proclipusa.com/phone-holders/device/sony/xperia-z5-compact.cmsv in USA
http://www.brodit.com/productList.html?brand=Sony&model=Xperia+Z5+Compact&pn=prod in Europe
I used their product with my last phone and it was a very nice and clean solution. Not affiliated in any way with them...
Click to expand...
Click to collapse
Thanx for the suggestion, but from where i'm living, spending upwards of a hundred dollars for a phone holder is unviable to me. Nice solution, just a tad pricey.
rebecker said:
I use this holder: http://www.amazon.com/gp/product/B00R0MELU6?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00
It is not made specifically for the Z5C. And the one major drawback for some people is that you have to put a permanent metal plate on the back of your phone. For that reason, I have added a Balolo wooden back. The metal plate is attached to the wood, allowing me to remove the plate (actually, the wood) without damage to the phone. The Mountek advertising says you can simply put the unattached metal plate between the phone and a typical case. However, with a previous phone I found that there's just enough movement of the metal to scratch the back of the phone, so I don't recommend that approach.
This is not the perfect answer, but after trying many different car phone holders I have been most satisfied with the Mountek. The magnet does a super job, even on the back country roads in Costa Rica. Mountek is planning to release an air vent version by the end of December, if the CD version doesn't work for you (or you use your CD player).
Hope this helps.
Click to expand...
Click to collapse
Looks like I'll be waiting for the air vent version to come out. Or until I find a better alternative. Thank you anyways
I'm using this: http://www.amazon.com/Breffo-Spiderpodium-Smartphone-Mount-Holder/dp/B003O1V5CY
I've bent the two of the arms to hook into an air vent and then bent the remaining six with 2 on the bottom and 4 on the sides. I've bent them in a way where I can mount the phone vertically and horizontally. When mounted vertically, the microUSB power cable plugs in nicely between the two legs.
gr00vy0ne said:
I'm using this: http://www.amazon.com/Breffo-Spiderpodium-Smartphone-Mount-Holder/dp/B003O1V5CY
I've bent the two of the arms to hook into an air vent and then bent the remaining six with 2 on the bottom and 4 on the sides. I've bent them in a way where I can mount the phone vertically and horizontally. When mounted vertically, the microUSB power cable plugs in nicely between the two legs.
Click to expand...
Click to collapse
Hello, I've came across this solution as well, how long have you had this product and how durable are the flexible 'legs'?
I shied away from it as I saw a couple of negative reviews stating that the 'legs' broke off just after a few uses.
Cheers!
I've had this setup for a couple years now with no issues. I don't really mess with it once it's in place. I do occasionally bend everything to make a stand so I can record time lapse recordings of my drives.
rebecker said:
I use this holder: http://www.amazon.com/gp/product/B00R0MELU6?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00
It is not made specifically for the Z5C. And the one major drawback for some people is that you have to put a permanent metal plate on the back of your phone. For that reason, I have added a Balolo wooden back. The metal plate is attached to the wood, allowing me to remove the plate (actually, the wood) without damage to the phone. The Mountek advertising says you can simply put the unattached metal plate between the phone and a typical case. However, with a previous phone I found that there's just enough movement of the metal to scratch the back of the phone, so I don't recommend that approach.
This is not the perfect answer, but after trying many different car phone holders I have been most satisfied with the Mountek. The magnet does a super job, even on the back country roads in Costa Rica. Mountek is planning to release an air vent version by the end of December, if the CD version doesn't work for you (or you use your CD player).
Hope this helps.
Click to expand...
Click to collapse
There is also a mountek version that doesn't use magnets. Its the Mountek Grip.
i use http://slipgripcarmounts.com
I use the Orzly bumper case which didnt quite fit. I sent him the case and the guy made a new mold for me which now fits. I think each one is made by hand by order. So if you do order, I'd email them first with what case you are using. They may offer to make one for you if you send them the case.
You can use also a original Nokia car holder cr-122 for the old Nokia N8-00. Is perfect to use for all Compact series with or without case (I'm using also with Puro 0.3 and Orzly fusion).
In my case I've customized the holder to attach to Brodit Proclip specific adapter for my car
Inviato dal mio SM-T700 utilizzando Tapatalk
http://www.amazon.com/gp/product/B00ZKTOG1K/ref=nav_timeline_asin?ie=UTF8&psc=1
I've just ordered my z5c (upgrading from z1c).
I have one of these handstraps attached to my phone case, and the elastic slips over the rear view mirror. I keep the phone over to one side so I can still use the mirror. Simple, cheap, and easy to keep your eyes on the road.
dave
Kenu Airframe.
Here's the first video review that came up on google:
https://www.youtube.com/watch?v=hd0ANTvuw5I
I am (again) very happy with this brodit mount: http://www.brodit.com/product.html?id=521797&pn=prod&brand=Sony&model=Xperia Z5 Compact
Not necessary to attach the charging cable to the mounted phone is very nice. And the brodit fits perfectly (without any case).
I have been using a number of different car holders from cheap to rather expensive stuff (not just for Z5C)
and until now the best working for me is this universal
http://www.ebay.com/itm/Universal-C...hash=item3f6716f952:m:mIwx2zz-h8VTQe568OmV9tA
It solves the problem when phone placed behind the front screen gets warm by sun and you need to charge it at the same time.
Air vent does the cooling and the problem is gone.
thedosbox said:
Kenu Airframe.
Here's the first video review that came up on google:
https://www.youtube.com/watch?v=hd0ANTvuw5I
Click to expand...
Click to collapse
I love the Kenu Airframe design, and it's worked in every car I've tried too. Very compact design that sticks into air vents and grips the sides of the phone (right above the power button is ideal). Also note that there are knock off cheap versions that you can find, such as from Deal Extreme, that seem to work just as well, at least with our compact phones
I only use a cardboard attached to the air vents up the radio. haha~ I'll post a picture sometime.
Is there anybody out there who has their Z5 Compact wrapped in a full body skin (wet apply type) who also has the Proclip mount for the Z5c, and can verify that the phone fits in the mount with the skin installed?
This turned out to be a real problem for me with my Nexus 4...the Proclip mold was not made with a millimeter to spare, and the tolerances were such that it had NO tolerance for anything but a completely naked phone. Hoping I can avoid a similar problem with the Z5c.
Thanks,
-- Nathan
moonbaywalk said:
Has anyone lucked out and managed to find a car holder for the Z5C?
Been looking around without success.
Click to expand...
Click to collapse
I have a mount that works awesome from my car. I paid $3 and waited for 1 month for delivery.
https://www.aliexpress.com/item/1Pc...or-GPS-for-Mobile-Phone-Drop/32248411351.html
If you are willing to be patient the cost of the car mounts on aliexpress are very cheap, you have very similar options that you see here on the thread.
I use this one:
https://www.amazon.de/dp/B00Y81PKYI/ref=cm_sw_em_r_mt_dp_.90Hzb9MKDH4F
Love it! The magnet is very strong and it's easy adjustable.