Nokia X2: Rooting & Installing Google Play Store after upgrading Nokia X2 to 2.1.0.12
Rooting and Installing Google Play Store after upgrading Nokia X2 to 2.1.0.12.
Did this right after upgrading to v2.1.0.12 with nothing else installed.
Upgraded to v2.1.0.12 using the Lumia/Nokia Software Recovery tool.
NOTE: Disable any Anti-Virus installed on the machine before running this.
Though it did not report any malicius code, on running it with turned On gave errors regarding running ADB daemon.
(I use Avast Anti-Virus)
1. Download Nokia x2 tools from the given link .
http://allnokia.ru/soft/moreinfo-115.htm
2. Enable developer mode and USB debugging on the phone:
To activate the developer mode go to Settings - About phone, and tap 5 times to "Software version".
To activate USB debugging go to Settings - Developer options - USB debugging.
3. Connect phone to PC with USB cable and run Nokia X tools v1.2.
4. First install the drivers typing 1 (i.e. "1 - Install Drivers for Nokia X2") and press enter.
After drivers are successfully installed reboot phone and also reboot PC.
5. Again connect the phone to PC and make sure it is in developer mode and USB debugging is enabled.
Enable root access by typing 4 (i.e. 4 - Gain Root-access (SuperSU 2.02)) and press enter.
Press enter if it ask if drivers are installed.
Note the instructions given after Root Access is successfully enabled.
Reboot phone and run the SuperUSer App as per the instructions noted in the command prompt.
6. Install Google Play Services by typing 2 (i.e 2 - Install GOOGLE PLAY + Services) and press enter.
Press enter if it ask if drivers are installed.
Reboot phone after Google Play Services is successfully installed.
Reference links:
http://www.openeducationusa.com/?p=29482
http://forum.xda-developers.com/nokia-x2/general/tool-nokia-x2-tools-1-1-rus-en-rooting-t2846570
In case of any issue you can use the Lumia/Nokia Software Recovery tool to reinstall fresh OS v 2.1.0.12.
The tool can be found here:
http://download-fds.webapps.microso...covery/LumiaSoftwareRecoveryToolInstaller.exe
Bro is it working on my Nokia x2ds version 2.1.0.11 ? Plz inform me. I want to root my mobile.
Yesterday i sent an email to huawei asking for the bootloader codes to my huawei g6-l11 and today they reply that they dont have the codes for this phone. Looked deeper into google and find out that dc unlocker already supports reading bootloader codes for this phone instantly
Here are the steps:
1. Download the last DC Unlocker Software
2. Install ADB drivers or Hisuite ( search forum )
3. Enable Manufacturer Mode, This is done by entering in dial pad code *#*#2846579#*#*, select "Project Menu", "Background settings", "USB ports settings", "Manufacturer mode".
4. Connect Phone to usb and open DC UNLOCKER
5. Open DC UNLOCKER and select Huawei Phones in manufacturer and leave the model Auto detect
6. Click on the magnifing glass and wait for detection
7. Voilá, the bootloader code appears in the BOX
8. Download Unlock Huawei Device GUI ( I cant leave links here but google is you friend )
9. Put the code generated by DC UNLOCKER in The field and click unlock
10. TADAAAAAAAA Unlocked Instantly
Remember, you can use this method to get the unlock code and you can use other methods to unlock the boot loader, just search the forum :good:
Not working for me:
DC - Unlocker 2 Client 1.00.1201
Detecting modem :
selection :
manufacturer - Huawei modems
model - Auto detect (recommended)
Found Applications port COM5
Found Diagnostics port COM4
Found USB interface {3F966BD9-FA04-4EC5-991C-D326973B5128}
Found modem : HUAWEI G6-L11
IMEI : 864037024395912
Firmware : 8226C00B109
SIM Lock status : unknown(read failed)
modem not found !
Click to expand...
Click to collapse
Diogo Glória said:
Yesterday i sent an email to huawei asking for the bootloader codes to my huawei g6-l11 and today they reply that they dont have the codes for this phone. Looked deeper into google and find out that dc unlocker already supports reading bootloader codes for this phone instantly
Here are the steps:
1. Download the last DC Unlocker Software
2. Install ADB drivers or Hisuite ( search forum )
3. Enable Manufacturer Mode, This is done by entering in dial pad code *#*#2846579#*#*, select "Project Menu", "Background settings", "USB ports settings", "Manufacturer mode".
4. Connect Phone to usb and open DC UNLOCKER
5. Open DC UNLOCKER and select Huawei Phones in manufacturer and leave the model Auto detect
6. Click on the magnifing glass and wait for detection
7. Voilá, the bootloader code appears in the BOX
8. Download Unlock Huawei Device GUI ( I cant leave links here but google is you friend )
9. Put the code generated by DC UNLOCKER in The field and click unlock
10. TADAAAAAAAA Unlocked Instantly
Remember, you can use this method to get the unlock code and you can use other methods to unlock the boot loader, just search the forum :good:
Click to expand...
Click to collapse
What phone model do you have???? Dont work in L11 LTE ...
I have the l11 4G LTE
Dont foget to enable manufacturer mode, it is necessary for qualcom phones
and make sure that you have the correct drivers
bugggmenot said:
Not working for me:
Click to expand...
Click to collapse
That is because you have modem in the field, you must select HUAWEI PHONE and not HUAWEI MODEM, hope it helps
Hi! I have the drivers, I try with debug mode on and off, I change the connection in engineering menu like you say, try all the usb types and nothing....
persona78 said:
Hi! I have the drivers, I try with debug mode on and off, I change the connection in engineering menu like you say, try all the usb types and nothing....
Click to expand...
Click to collapse
What error dc unlocker shows?
Thanks!!
Diogo Glória said:
What error dc unlocker shows?
Click to expand...
Click to collapse
no device.
but i think i need to reboot the phone when i choose Manufacturer mode, i dont try yet....
Do you have done any reboots?
Diogo Glória said:
Yesterday i sent an email to huawei asking for the bootloader codes to my huawei g6-l11 and today they reply that they dont have the codes for this phone. Looked deeper into google and find out that dc unlocker already supports reading bootloader codes for this phone instantly
Here are the steps:
1. Download the last DC Unlocker Software
2. Install ADB drivers or Hisuite ( search forum )
3. Enable Manufacturer Mode, This is done by entering in dial pad code *#*#2846579#*#*, select "Project Menu", "Background settings", "USB ports settings", "Manufacturer mode".
4. Connect Phone to usb and open DC UNLOCKER
5. Open DC UNLOCKER and select Huawei Phones in manufacturer and leave the model Auto detect
6. Click on the magnifing glass and wait for detection
7. Voilá, the bootloader code appears in the BOX
8. Download Unlock Huawei Device GUI ( I cant leave links here but google is you friend )
9. Put the code generated by DC UNLOCKER in The field and click unlock
10. TADAAAAAAAA Unlocked Instantly
Remember, you can use this method to get the unlock code and you can use other methods to unlock the boot loader, just search the forum :good:
Click to expand...
Click to collapse
When i open DC unlocker the Ports Section is always blank any solution?
Tutorial in next post works.
#HuaweiBootloaderUnlock
Hi! To Unlock the bootloader, first try this site, but if you don´t have you need to create a account ( free ):
https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
Insert your data like this example for U10:
http://postimg.org/image/6kddvoboj/
U10-G6, huawei G6-U10, etc..., DON´T WORK! Insert it like image shows.
Example for L11 model:
http://postimg.org/image/wha6ixm85/
Be sure from the data you are inserting...
If the Huawei site don´t work than try the next tutorial...
About the DC - Unlocker client and how to get the bootloader code.
It WORKS and i found how it works.
Here are the steps:
1. Need a internet connection and don´t use a proxy server, download DC-Unlocker but only this version works, install it and reboot :
https://mega.nz/#!ykxjiRia!ppWG22acgv35N5j1VMTsZlKMi0i0JQB9v8BVn5l98WI
DC-unlocker-client-software-V1_00_1201
2. Turn ON debug mode
Go to Settings -> About phone -> Press several times Build number it will say "you are a developer now" -> go back and open Developer options ->Turn ON USB debugging -> DONE
3. Install ADB drivers with Hisuite ( best way ):
http://consumer.huawei.com/minisite/HiSuite_en/
The first time HiSuite try to connect with the phone, in the screen phone it will pop up a Windows requesting permissions for the connection with PC, MUST GIVE IT!
4.With the phone >>>> UNPLUGED<<<<:
Enable USB Manufacturer Mode in phone:
In dial pad type code *#*#2846579#*#*
select "Project Menu"
"Background settings"
"USB ports settings"
"Manufacturer mode"
"CORFIRME"
5. Connect the Phone to usb, check if PC is installing the phone, wait to finish to install it. It will pop up a window in phone to choose connection, DON´T DO ANY THING, let it be like it is, in charge mode.
6. Execute, OPEN DC- UNLOCKER FOLDER A EXECUTE THE EXE FILE WITH ADMINISTRATIVE PRIVILEGES, DC UNLOCKER and Select Huawei Phones in manufacturer and leave the model in Auto detect
7. Click on the magnifing glass and wait for detection. Ignore any advise that you are using a old version of dc-unlocker, in new version to use this option you need to pay.
8. You will see the bootloader code appears in the BOX bellow.
9. Use this software and the unlock bootloader option, 18 option:
https://mega.nz/#!WgoVWLjQ
Key:
!YV1JLOGvXX4rvYreDXP1Twwh-V5O65NjmMxBH_7unUI
Read this- BOOTLOADER Unlocking-Relocking Procedure:
https://www.facebook.com/download/1560613864260023/BOOTLOADER Unlocking-Relocking Procedure.docx
If still don´t work, go here:
https://www.facebook.com/groups/huawei.g6.development/permalink/457458214413436/
Hi, thanks for this tutorial. I have followed these steps:
persona78 said:
Hi!
This is how i made it:
Here are the steps:
1. Download DC-Unlocker but only this version works, install it and reboot :
2. Turn ON debug mode
Go to Settings -> About phone -> Press several times Build number it will say "you are a developer now" -> go back and open Developer options ->Turn ON USB debugging -> DONE
3. Install ADB drivers with Hisuite ( best way ):
The first time HiSuite try to connect with the phone, in the screen phone it will pop up a Windows requesting permissions for the connection with PC, MUST GIVE IT!
4. It need to enable USB Manufacturer Mode in phone:
In dial pad type code *#*#2846579#*#*
select "Project Menu"
"Background settings"
"USB ports settings"
"Manufacturer mode" (IF OPEN THE MENU TO CHOOSE THE USB CONNECTION PRESS RETURN TO GO BACK TO CONFIRME)
"CORFIRME"
And Reboot the phone,.
5. Connect Phone to usb (MY DEBUG MODE WAS ON AND USB FLASH DRIVE WAS SELECTED) and open DC UNLOCKER.
6. Select Huawei Phones in manufacturer and leave the model Auto detect
7. Click on the magnifing glass and wait for detection
8. You will see the bootloader code appears in the BOX bellow.
Click to expand...
Click to collapse
In step 8, I get some information about my phone but the bootloader code is not there. All the information I get is the following:
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Applications port COM5
Found Diagnostics port COM7
Found Phone : HUAWEIG6-L11
Model : Huawei Qualcomm Android phone
IMEI : XXXXXXXXXXXXXXX
Serial NR. : T7L7N1XXXXXXXXXX
Firmware : MSM8226C00B119_AMSS Sep 15 201410:04:11
Hardware ver. : HL1G6L22M
Wi-Fi MAC : XX:XX:XX:XX:XX:XX
BlueTooth MAC : XX:XX:XX:XX:XX:XX
SIM Lock status : unlocked
I suppose that the bootloader unlock code should be there but it is not. Is it possible that this method doesn't work for my phone? Or have I done something wrong?
Thanks for your help.
jjjuuann said:
Hi, thanks for this tutorial. I have followed these steps:
In step 8, I get some information about my phone but the bootloader code is not there. All the information I get is the following:
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Applications port COM5
Found Diagnostics port COM7
Found Phone : HUAWEIG6-L11
Model : Huawei Qualcomm Android phone
IMEI : XXXXXXXXXXXXXXX
Serial NR. : T7L7N1XXXXXXXXXX
Firmware : MSM8226C00B119_AMSS Sep 15 201410:04:11
Hardware ver. : HL1G6L22M
Wi-Fi MAC : XX:XX:XX:XX:XX:XX
BlueTooth MAC : XX:XX:XX:XX:XX:XX
SIM Lock status : unlocked
I suppose that the bootloader unlock code should be there but it is not. Is it possible that this method doesn't work for my phone? Or have I done something wrong?
Thanks for your help.
Click to expand...
Click to collapse
Your DC-Unlocker is this version V1_00_1201????? Only this one shows the code, the new versions dont!
The link i post is for V1_00_1201 version, the only one that works on G6!
-----
F...k the download link for that version is not there any more.... I think i have it, i will upload and post it!
--------------
This is the right version
https://mega.nz/#!ykxjiRia!ppWG22acgv35N5j1VMTsZlKMi0i0JQB9v8BVn5l98WI
DC-unlocker-client-software-V1_00_1201
persona78 said:
Your DC-Unlocker is this version V1_00_1201????? Only this one shows the code, the new versions dont!
The link i post is for V1_00_1201 version, the only one that works on G6!
-----
F...k the download link for that version is not there any more.... I think i have it, i will upload and post it!
--------------
This is the right version
DC-unlocker-client-software-V1_00_1201
Click to expand...
Click to collapse
As you said, the problem was the version of DC-Unlocker (I was trying with version 1.00.1214).
I finally got my bootloader code with version 1.00.1201
Thank you very much for your help!!!
The new versions have that option to but need to activate the paid version... to many downloads made a opportunity for the creator, I think.
WOW finally it worked!! Tnx persona :X
notice that after installing HiSuit and ADB drivers, you need to recheck "Manufacturer mode" again. that was the part that took a lot of time for me to realize. even no restart needed!!
I had "Debug mode" on , Mass Storage and used DC Unlocker V1_00_1201 .
it seems DC Unlocker gets BL code frome a server, so make sure your anti virus allows DC Unlocker to connect.
Hi personna78
It doesn't work with my device.
I use dc-unlocker v1.00.1201
I use debug mode and usb flash drive
I use manufacturer mode
I get this answer:
Found phone : huawei g6-l11
IMEI : xxxx xxxx
Firmware : g6-l11v100r001c900b370
Device may be in wrote mode
Can you help me ?
sleo38 said:
Hi personna78
It doesn't work with my device.
I use dc-unlocker v1.00.1201
I use debug mode and usb flash drive
I use manufacturer mode
I get this answer:
Found phone : huawei g6-l11
IMEI : xxxx xxxx
Firmware : g6-l11v100r001c900b370
Device may be in wrote mode
Can you help me ?
Click to expand...
Click to collapse
Hmmmm, when you change to manufacture mode, confirm and don't reboot try dc unlocker than.
persona78 said:
Hmmmm, when you change to manufacture mode, confirm and don't reboot try dc unlocker than.
Click to expand...
Click to collapse
Hi personna78
OK, it is work non. Thank a lot
need to convert my chinese mate to international version
i read OEM UNLOCK CODE from dc unlocker
but whenever i use command
i faced remote command not allowed error
please help me experts
Found Phone : HUAWEI NXT-AL10
Model : Huawei phone in fastboot mode
IMEI : ..................................
Serial NR. : ............................
Firmware : NXT-AL10C00B368
IMEI:.................................
FB LockState: LOCKED
USER LockState: LOCKED
locked
Battery state: 3554mv
there is no FRP enabled bcz i tried to format it many times
Did you enable oem unlock from developer settings?.
You have to turn off Find my phone
gm007 said:
Did you enable oem unlock from developer settings?.
Click to expand...
Click to collapse
there is no oem unlock option in developer setting
natxoga said:
You have to turn off Find my phone
Click to expand...
Click to collapse
its already off no huawei id & no gmail id
any other solution thanx in advance
Did you activate phone finder in the past? I know a case of a guy who activated phone finder then flashed an international rom and the phone finder feature dissapeared but it was still activated and the fastboot commands failed.
I had the same problem two days ago whe i flashed the Nougat Beta, fastboot said remote command not allowed, and it was because of that.
i am still at Chinese version & phone finder is disabled
is here any other solution
OEM unlock missing
..::Mobile Smoker::.. said:
there is no oem unlock option in developer setting
Hi,
I have the same issue. OEM unlock option is missing. Both in Android nougat B575 & B386. phone finder is disabled.
I downgraded to B386 using Hisuite and then flashed B386 update.app downloaded from another thread. Still it didn't work.
Did you or any one with NXT-AL10 manage to get this option ? If yes, please share how we can succeed. I feel without this option we can't move ahead.
Thanks,
Sam
Click to expand...
Click to collapse
..::Mobile Smoker::.. said:
need to convert my chinese mate to international version
i read OEM UNLOCK CODE from dc unlocker
but whenever i use command
i faced remote command not allowed error
please help me experts
Found Phone : HUAWEI NXT-AL10
Model : Huawei phone in fastboot mode
IMEI : ..................................
Serial NR. : ............................
Firmware : NXT-AL10C00B368
IMEI:.................................
FB LockState: LOCKED
USER LockState: LOCKED
locked
Battery state: 3554mv
there is no FRP enabled bcz i tried to format it many times
Click to expand...
Click to collapse
NXT-AL00C17B573 (Official) Huawei Mate 8 Stock Firmware Android 7.0 EMUI 5.0
Step by Step Guide
1.
Download these 3 files (update.zip, update_data_full_cmcc_cn.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1255/g104/v71280/f1/full/update.zip
1.2- http://update.hicloud.com:8180/TDS/...80/f1/full/all/cn/update_data_full_all_cn.zip
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2-
Copy these 3 files (update.zip, update_data_full_cmcc_cn.zip, update_data_full_all_cn.zip) into SD Card
3-
Download TWRP Recovery 3.0.2-0
http://sillanwali.com/downloads/twrp-3.0.2-0-next.img
4-
adb devices
adb reboot bootloader
fastboot flash recovery (PATH-TO)\twrp-3.0.2-0-next.img
5-
5.1- Reboot your phone to TWRP then choose Wipe > format > type Yes
5.2- Back again, then wipe (data, dalvik, cache, system)
5.3- Don't reboot after install
6-
Install
6.1- supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- update.zip (Don't reboot after install)
ignore unmounting \cust, userdata, system error
6.3- update_data_full_all_cn.zip (Reboot when success)
7-
Factory Reset after success 100%. After that you will get NXT-AL10C17B573 (Official) Stock Firmware.
8-
HiSuite
8.1- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
8.2- Install HiSuite on your Computer
9-
Download apk & Install Apps using HiSuite
9.1- Google Play Store
http://www.sillanwali.com/downloads/Google Play Store 7.4.12.L-all [0] [PR] 144479971.apk
9.2- Google Play Services
http://www.sillanwali.com/downloads/Google Play Services 10.0.84 (448-137749526).apk
9.3- Google Contacts Sync
http://www.sillanwali.com/downloads/Google Contacts Sync 7.1.1.apk
9.4- Google Calendar Sync
http://www.sillanwali.com/downloads/Google Calendar Sync 5.2.3-99827563-release.apk
10-
Not liking l29c636b320 on emui ver 4.1 marshmallow so began a journey.. debranded to 432 and got nougat b560 running but some issues with data and mms.. then after rollback stayed on 432 and installed kangvip b386 and twisted mate 8.. here's where problems started.. from twisted mate I guess I only partially debranded to al10 and then dload al10cb386 so that I could try al10cb577.. flashed via twrp and it booted okay.. however now there is no sim detected and in developer options there is no option to unlock bootloader.. it seems I'm kinda inbetween debranding not being fully on al10.. however the system does show a ota of b577 .. should I take it? or is there any other way to get the bootloader option to show in developer options
***Edit***
Was able to fix.. even though oem unlock bootloader didn't show in developer options I was still able to do it via fastboot oem unlock command
bailey2408 said:
Not liking l29c636b320 on emui ver 4.1 marshmallow so began a journey.. debranded to 432 and got nougat b560 running but some issues with data and mms.. then after rollback stayed on 432 and installed kangvip b386 and twisted mate 8.. here's where problems started.. from twisted mate I guess I only partially debranded to al10 and then dload al10cb386 so that I could try al10cb577.. flashed via twrp and it booted okay.. however now there is no sim detected and in developer options there is no option to unlock bootloader.. it seems I'm kinda inbetween debranding not being fully on al10.. however the system does show a ota of b577 .. should I take it? or is there any other way to get the bootloader option to show in developer options
***Edit***
Was able to fix.. even though oem unlock bootloader didn't show in developer options I was still able to do it via fastboot oem unlock command
Click to expand...
Click to collapse
NXT-DL00C17B573 (Official) Huawei Mate 8 Stock Firmware Android 7.0 EMUI 5.0 (v71279 China Unicom)
NXT-DL00C17B573
B]Firmware (Full)[/B]
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1255/g104/v71279/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...full/dualcu/cn/update_data_full_dualcu_cn.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1255/g104/v71279/f1/full/filelist.xml
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1255/g104/v71279/f1/full/changelog.xml
Step by Step Guide
1.
Download these 3 files (update.zip, update_data_full_dualcu_cn, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1255/g104/v71279/f1/full/update.zip
1.2- http://update.hicloud.com:8180/TDS/...full/dualcu/cn/update_data_full_dualcu_cn.zip
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2-
Copy these 3 files (update.zip, update_data_full_dualcu_cn, supersu_v2.79_sr2.zip) into SD Card
3-
Download TWRP Recovery 3.0.2-0
http://sillanwali.com/downloads/twrp-3.0.2-0-next.img
4-
adb devices
adb reboot bootloader
fastboot flash recovery (PATH-TO)\twrp-3.0.2-0-next.img
5-
5.1- Reboot your phone to TWRP then choose Wipe > format > type Yes
5.2- Back again, then wipe (data, dalvik, cache, system)
5.3- Don't reboot
6-
Install
6.1- supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- update_data_full_dualcu_cn.zip (Don't reboot after install)
ignore unmounting \ cust, system, userdata error
6.3- update.zip (Reboot when success)
7-
Factory Reset after success 100%. After that you will get NXT-TL00C17B573 (Official) Firmware.
8-
HiSuite
8.1- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
8.2- Install HiSuite on your Computer
9-
Download apk & Install Apps using HiSuite
9.1- Google Play Store
http://www.sillanwali.com/downloads/Google Play Store 7.4.12.L-all [0] [PR] 144479971.apk
9.2- Google Play Services
http://www.sillanwali.com/downloads/Google Play Services 10.0.84 (448-137749526).apk
9.3- Google Contacts Sync
http://www.sillanwali.com/downloads/Google Contacts Sync 7.1.1.apk
9.4- Google Calendar Sync
http://www.sillanwali.com/downloads/Google Calendar Sync 5.2.3-99827563-release.apk
10-
Did I help you? A ''thanks :good:'' would be highly appreciated
Requirements:
- You can do both with the bootloader blocked and unlocked
- Have Motorola drivers installed
- Download software official motorola: search on google Lenovo Moto Smart Assistant
-works for all variants of moto z3 play
Process:
1. Instalacion software official motorola
2. Conect device with usb cable
3. Turn on usb debug mode / setting>devoloper option
not find "developer option" go setting> about phone > tap build number 7 times
4. Authorize debug mode
5. Go to flash guide
it will appear the information of your smartphone, click on the arrow to check if it has update available and the program will begin to download the rom, after the download is finished, the program will make the extraction process of the rom, after the extraction term the button update will enable, click refresh, cell phone will reboot in download mode and start updating, wait for the update to finish, the phone will reboot and it will be updated.
This process does not format the smartphone
if you have magisk installed after the upgrade you will have to do the magisk installation process by TWRP.
Added a link to this thread to my
Update your Moto with (Lenovo) MOTO Smart Assistant (PC)