Hi!
So I've managed to connect a USB reciever (made for PCS) to the tablet USB port and got my controller working on the tablet. Literally, working. Buttons are responding and it controls everything.
However, trying to play GTA Vice City has proven futile. It appears the controller is constantly transmitting a "right camera movement" to the tablet making it "turn around the character". No matter what I tried, it appears to simply be "jammed" with this.
Since no software was installed, and the controller is basically working with builtin drivers, I was wondering whether someone tried to do the same, had the same issues and found a work around?
I had the same issue. This is a known problem, described in several topics. If your Transformer is rooted, the solution is provided here: http://forum.xda-developers.com/showthread.php?t=1792531. It's for Nexus, but works for Transformers.
For non-rooted devices, I'm afraid there is no solution.
So I am posting this everywhere as I found very little information about how to do this and trouble shooting some issues. Made a reddit post and going to post it here (I hope this is a proper place to put this).
Just hold down the PS button and Share till the light starts to flash. Go to your Bluetooth and pair the game controller.
Trouble shooting suggestions are on bottom.
Now after about 30sec, and for some unknown reason, you will run into input lag. To fix this you will need to download an app called Bluetooth Auto Connect. Once installed goto Advanced Options - Connect Now. Once you push Connect Now the input lag should be gone.
If you are looking for a clamp I just bought something called Nyko Smart Clip - PlayStation 4 on Amazon for $10. TOTALLY WORTH IT!
Trouble Shooting:
I had an issue when pairing that it would see the device but wouldn't pair. What I had to do was turn off Bluetooth, turn it back on and try again.
Another issue I had was Bluetooth Auto Connect wasn't fixing the lag issue on my Samsung Note Pro (same device I had an issue pairing, my Samsung Note 4 didn't have any of these issues). I had to uninstall sixaxis controller then restart device. Then uninstall Bluetooth Auto Connect and restart device. Then connect DS4 controller. Then install Bluetooth Auto Connect and spammed Connect Now. It seemed to work. FYI my Note Pro is rooted but my Note 4 isn't and this works on both devices!
To repair the controller to your PS4 plug it in with your charging cable and push the PS button, it will pair immediately. I personally bought a 2nd controller so I wouldn't have to do that.
Hello, I tried this with my ps 4 controller and it says that the controller is paired but the light on the controller keeps flashing and it does not respond to any input and after some time it just turns off, the Bluetooth auto connect app just says that is unable to connect to wireless controller, please help, my device is a galaxy s7 edge.
Connecting the PS4 controller works for me but can't do anything else such as can't play games or anything, maybe a future update when everyone starts to cry a bit more about how the S7 Edge isn't compatible with any controller, I have tried 3rd party controllers and the right joystick and the rest of the buttons do not work, the only thing that works is the left joystick...
Before the 7.0 Nougat update on the S7 Edge (SM-G935P) the OTP (wired) connection would crash the phone; freezing the display, hard reboot. This happened on the OFW and rooted versions. Bluetooth would pair but you'd have to try multiple times and you'd need to delete the original pairing to repair (holding the pair buttons on the controller).
After the 7.0 Nougat update, controller support had been added- albeit horribly. The only connection is an OTP connection, Bluetooth still has errors. The button configurations are wrong though, the controller is useless. Square, X and circle are all wrong and triangle doesn't even register.
This is where I'm at, anyone know of any fix? I'm not looking forward to buying a Stratus XL (works perfectly but it's 60$)
I'm about to just switch from Samsung to Sony lol.
Unfortunately the guy that wrote this article is guilty of blatant douchbaggery (what good is a paired controller that cant be mapped and starts mapped completely out of whack). Yes you can 2 button pair a ds4 controller but a ds4 controller is encrypted and requires in linux and linux like os a driver called SCP (SONY CORP.SOMTHING......) That just isnt offered by any app ive seen on droid other than sixaxis. Alternately you could always hard wire it . The major flaw in this is the inability to stop the controller from charging in this case off your phone battery. As far as the mapping goes the only issue is android uses the generic abxy combo which is cross circle square triangle in ps4 speak . in retrospect .....i suppose i should have stopped reading when the author claimed no root. The controller keylayout files (.kl) are located in/system/user/keylayout. How are u supposed to do anything to those w/o root?
Hello.
For the last two days I have been trying to make my OMEGA Wireless Gamepad (a copy of the PS Dual Shock controller) work on my Galaxy J7 2016 (6.0.1).
It connects to the phone through Bluetooth as a input device no problem but it won't work further than just that.
I even rooted the phone to try some stuff out but to no avail.
It stays connected but none of the buttons do anything (not in phone menu, not in PPSSPP, not in a bunch of keymapper aps).
So I was wondering is there a way to get this fixed without me having to buy an Micro USB to USB Adapter and trying that out.
Thanks for reading.
I bought Amazon Fire HD8(2018), I thought I can use it as a budget option for emulator gaming or native gaming.
Everything works fine software wise, but I can't properly connect it with gamepads.
Here are my gamepads:
Steam Controller x2 - it only works in the Steam Link App, and become mouse outside the app.
Dual Shock 4 (gen1) x1 - it can pair and show as "wireless controller" in setting, but just completely not sending any control signal to Android. (googled it, someone said gen1 is not supported by Android, but also many posts say DS4 is usable before gen2 even came out, so I really can't understand why this is not working)
Switch Pro Controller x2 - it can pair, Android do receive its signal, but it has huge input lag and intermittently signal, this is a common issue online, and I can't find a solution so far.
So, that's already 3 kinds of popular controllers I have tried and I don't have other controllers (5 are already a bit too much for me).
Is there anything I can try to make those controllers work? maybe I can install a driver or something?
If there is really no solution for controllers I already have, what's the budget/working/wireless gamepad that recommended to buy for my HD8?
Thanks.
With older versions of Android, it's hard to make gamepads work. There's not much you can do about that. You can try Android-specific Bluetooth gamepads. 8BitDo and Gamesir controllers apparently work well. Moga ones might, too.
@sky1331, have you tried a micro usb OTG adapter yet? It may expand your available options by allowing you to use your controllers wired (albeit at the cost of not being able to charge your tablet while playing).
MisterMalakai said:
@sky1331, have you tried a micro usb OTG adapter yet? It may expand your available options by allowing you to use your controllers wired (albeit at the cost of not being able to charge your tablet while playing).
Click to expand...
Click to collapse
I have tried a micro USB OTG cable. It doesn't work. I tried with two different controllers and both produced the same result.
XBox One controller model 1697: I first tried the OTG adapter without external power to the HD8 (2018) through the OTG adapter. The controller vibrated and the home light turned on. Then the tablet rebooted without warning. I assumed that the controller was drawing power from the tablet so I also plugged in the power cord for the tablet to the OTG adapter and tried again. Same result. Vibrates, lights up, tablet reboots. If you leave the controller plugged in while it boots, it will bootloop.
Dual Shock 3 model CECHZC2U: Downloaded Sixaxis Compatibility Checker. Method 5 for drivers worked, so I purchased the Sixaxis app. I plugged the controller into my laptop and reassigned the MAC address to my tablets Bluetooth MAC address. Then I clicked "Pair" on the Sixaxis app and waited until I saw "Looking for controller" like I'm supposed to. Then I unplugged the controller from my laptop and pressed the home button. 4 flashing lights that just keep flashing. And flashing. And flashing. Until they all go out like the controller timed out. Damn. So I plugged in the OTG adapter again and plugged the controller into the tablet. It didn't reboot and the 1st light lit up like it was assigned the player 1 spot. So I unplugged it. Immediately all 4 lights started flashing again until it timed out. So I plugged it back into the tablet and got the 1st light again. Then I fired up every app I know of that supports external controllers. Not a single one could detect the controller. Nor could I control Android like I normally can with my spare Moto Z Force with the Moto Gamepad mod. So, no input is being detected at all.
I don't have any other controllers to test, but my guess is that a generic Bluetooth controller might work, but none of the major controllers seem to work so don't get your hopes up. I will also say that I know it's not a problem with the tablet or OTG cable. Both work great when I plug a flash drive into the OTG cable while hooked up to the tablet. The drive shows up just fine.
Edit: I bought a Playstation Classic. I don't have a need for a second controller for it and it comes with 2 so I thought I'd try the extra on the Fire HD 8 2018. It works great using an OTG cable. ePSXe detected it straight away and I can control Android with the controller perfectly fine. Retroarch sees it. So, I've found a solution that meets my needs. I'd have preferred wireless, but I really didnt want to purchase a whole controller for a device I'm not intending to lose or break in 6-9 months but will realistically happen within that timeframe.
It's working, I using the GEN Game Bluetooth Gamepad, it's working.
I'm having the same problem with my Kindle Fire 10 HD 7th gen tablet. I bought a IPEGA PG-9023 Telescopic Wireless Bluetooth Game Controller. It's detected, but it just won't connect. Works fine with the Amazon Firestick 4K. The only difference is that the Firestick uses Bluetooth 5.0 + LE and the Kindle 10" Tablet uses Bluetooth 4.1 + LE which the IPEGA gamepad is supposed to support. I have no idea whatsoever why it won't connect.
https://www.amazon.co.uk/gp/product/B078Q3VDQ4/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
anyone tired using PlayStation remote play on fire hd10 11thgen? On my last fire hd8 I tried for months to get it all to work. I could get the PlayStation remotely working but then could not get a DS4 of DS5 to work as stated in the OP.
so any other advice? Thsnks.
sky1331 said:
I bought Amazon Fire HD8(2018), I thought I can use it as a budget option for emulator gaming or native gaming.
Everything works fine software wise, but I can't properly connect it with gamepads.
Here are my gamepads:
Steam Controller x2 - it only works in the Steam Link App, and become mouse outside the app.
Dual Shock 4 (gen1) x1 - it can pair and show as "wireless controller" in setting, but just completely not sending any control signal to Android. (googled it, someone said gen1 is not supported by Android, but also many posts say DS4 is usable before gen2 even came out, so I really can't understand why this is not working)
Switch Pro Controller x2 - it can pair, Android do receive its signal, but it has huge input lag and intermittently signal, this is a common issue online, and I can't find a solution so far.
So, that's already 3 kinds of popular controllers I have tried and I don't have other controllers (5 are already a bit too much for me).
Is there anything I can try to make those controllers work? maybe I can install a driver or something?
If there is really no solution for controllers I already have, what's the budget/working/wireless gamepad that recommended to buy for my HD8?
Thanks.
Click to expand...
Click to collapse
I'm using this controller: "Xbox Series X Wireless Controller Electric Volt". It pairs and works fine with Retroarch emulation of nes, snes, ps1, etc.. and Asphalt 8.
chockimon said:
I'm having the same problem with my Kindle Fire 10 HD 7th gen tablet. I bought a IPEGA PG-9023 Telescopic Wireless Bluetooth Game Controller. It's detected, but it just won't connect. Works fine with the Amazon Firestick 4K. The only difference is that the Firestick uses Bluetooth 5.0 + LE and the Kindle 10" Tablet uses Bluetooth 4.1 + LE which the IPEGA gamepad is supposed to support. I have no idea whatsoever why it won't connect.
https://www.amazon.co.uk/gp/product/B078Q3VDQ4/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
"Xbox Series X, Electric Volt". It also works on my FireTvstick 4k Max.
Hi,
Has anybody successfully used a PS3 sixaxis / dualshock 3 controller with their S10e or S10? I'm attempting to use it with a USB OTG adaptor for Steam Link, but it seems that only the shoulder triggers and left thumb stick work properly, with the other buttons not working or being detected.
Wondering if this is a particular problem with the S10s as the DS3 controllers seem to work just fine with other android phones.
Thanks!