First of all, hello.
Second, let me explain the problem:
I accidentally soft - bricked my ZTE V987.
That would not be a problem if I didn't also lose my ROM backup.:crying:
What I did so far while trying to fix it:
1. Tried to re - install Bruno's CWM recovery through SP flash tool - was unable to. SP flash tool enable dram fail error.
2. Found out I needed a preloader.bin, found one that worked (have found few preloader.bin files for v987 but all failed to flash except one) - flashed that.
3. Tried Cwm again - success.
4. Instaled Bruno's 3.0 mod rom through CWM, success, but lost Baseband, IMEI, Serial Number, BT and WIFI MAC Address.
5. Tried installing zte v987 china stock 1.0.1 rom through cwm - success, have baseband, but no IMEI, no Serial Number, BT and WIFI MAC Address.
6. Found about sn write tool, used it to restore IMEI and WIFI MAC address - success, BT & SN - fail: SN says it is written yet it is always displayed as 0123456789ABCDEF, but BT MAC sn write tool always fails with BT DB write fail error.
So, from what I managed to figure out, I need either a full ROM Dump from a working ZTE 987, and a way to insert all these numbers back in, or any other way to fix my phone.
To anyone willing to help, thanks in advance, and if this thread is in wrong subforum I am very sorry.
v987 bricke to
hello
I have the same probleme with no sim detection, I trie to restore with this tuto http://forum.xda-developers.com/showthread.php?t=2461059 but I have no baseband no imei ... but wifi ok and BT ok
where have you find "zte v987 china stock 1.0.1 rom" ? i have find only update.
thank for your reply
and sorry for my english
Patrick
Flash with stock firmware. It will 100% working.
Sent from Xda Premium 4
hello amit9734
i am sorry but i dont have stock firmware
Where I can find it ?
thanck
V987 IMEI invalid
I have a very similar problem; V987 showing invalid IMEI numbers but WiFi, BT etc all working. SN shown as 123456789ABCDEF. Phone does not recognise the Engineering mode code or offer an option to enter it via Gravity box. I can't get the IMEI & SN Writer tool to recognise the phone.
I have another V987 with stock ROM - does anybody know how to dump the ROM so I can copy it to my other phone?
(The links to the stock ROM on Bruno's thread do not work)
Edit: Problem solved! I used MTK tools to make a NVRAM dump of the stock ROM then the Flash tool to copy the ROM to my old phone. The strange thing is that the phone remembered the correct IMEI and SN numbers. I now have two fully working V987's!
ChiPhoneUser said:
I have a very similar problem; V987 showing invalid IMEI numbers but WiFi, BT etc all working. SN shown as 123456789ABCDEF. Phone does not recognise the Engineering mode code or offer an option to enter it via Gravity box. I can't get the IMEI & SN Writer tool to recognise the phone.
I have another V987 with stock ROM - does anybody know how to dump the ROM so I can copy it to my other phone?
(The links to the stock ROM on Bruno's thread do not work)
Edit: Problem solved! I used MTK tools to make a NVRAM dump of the stock ROM then the Flash tool to copy the ROM to my old phone. The strange thing is that the phone remembered the correct IMEI and SN numbers. I now have two fully working V987's!
Click to expand...
Click to collapse
ok thank I just have to find another V987
Ziko_Tamburash said:
First of all, hello.
Second, let me explain the problem:
I accidentally soft - bricked my ZTE V987.
That would not be a problem if I didn't also lose my ROM backup.:crying:
What I did so far while trying to fix it:
1. Tried to re - install Bruno's CWM recovery through SP flash tool - was unable to. SP flash tool enable dram fail error.
2. Found out I needed a preloader.bin, found one that worked (have found few preloader.bin files for v987 but all failed to flash except one) - flashed that.
3. Tried Cwm again - success.
4. Instaled Bruno's 3.0 mod rom through CWM, success, but lost Baseband, IMEI, Serial Number, BT and WIFI MAC Address.
5. Tried installing zte v987 china stock 1.0.1 rom through cwm - success, have baseband, but no IMEI, no Serial Number, BT and WIFI MAC Address.
6. Found about sn write tool, used it to restore IMEI and WIFI MAC address - success, BT & SN - fail: SN says it is written yet it is always displayed as 0123456789ABCDEF, but BT MAC sn write tool always fails with BT DB write fail error.
So, from what I managed to figure out, I need either a full ROM Dump from a working ZTE 987, and a way to insert all these numbers back in, or any other way to fix my phone.
To anyone willing to help, thanks in advance, and if this thread is in wrong subforum I am very sorry.
Click to expand...
Click to collapse
Hello! I have a question! How did you complete step 2? I still have my V987 bricked and I can't seem to find an appropriate preloader.bin to wake it up again. I know I'm not exactly helping you, but I would be so grateful if you can help me out with that! I have less than 5 hours with this new ZTE and I already messed it up
I need urgently Yu5010a stock Recovery
Plese provide me link
My device is Yuphoria Yu5010a not Yu5010 .
Hello
I have a YU5010A and i recently tried flashing stock firmware and i lost my imei number. Now it keeps rebooting if i put on sim cards and without them it boots up. I sent it to a few service centers but they were not able to fix it. Any solution or patch to restore the imei number would be appreciated! Its and Indian unit. Hope will get a positive respone soon.
Thanks!
Root it and use imei changer it will work
Hello everyone, this is my first post here. I rooted my phone a few days back and a couple of days later i found out Xposed framework. As it required TWrp i proceeded to flash my Rom but in the process got stuck at BOOTLOOP. i flashed it with my stock rom from here http://forum.xda-developers.com/general/general/stock-rom-lenovo-k4-note-t3312345, but somehow deleted my imei number. Since then i have been trying to restore my IMEI number and have followed the following processes but nothing is working. They are as follows:-
1. Sn write method - Gives me meta error and fails.
2. Maui meta 3g method- It gors on well untill the last where it gives me error.
3. Moto droid tools- not working at all.
4. Mobile uncle- EVerything is working but IMEI not changing.
5. Chamelephon Method - Working but not changing IMEi.
6. IMEI.exe method - Not changing Imei.
Please can someone please help me out?
anurag91 said:
Hello everyone, this is my first post here. I rooted my phone a few days back and a couple of days later i found out Xposed framework. As it required TWrp i proceeded to flash my Rom but in the process got stuck at BOOTLOOP. i flashed it with my stock rom from here http://forum.xda-developers.com/general/general/stock-rom-lenovo-k4-note-t3312345, but somehow deleted my imei number. Since then i have been trying to restore my IMEI number and have followed the following processes but nothing is working. They are as follows:-
1. Sn write method - Gives me meta error and fails.
2. Maui meta 3g method- It gors on well untill the last where it gives me error.
3. Moto droid tools- not working at all.
4. Mobile uncle- EVerything is working but IMEI not changing.
5. Chamelephon Method - Working but not changing IMEi.
6. IMEI.exe method - Not changing Imei.
Please can someone please help me out?
Click to expand...
Click to collapse
Greetings,
Discussion regarding the changing or writing of IMEI is prohibited on XDA due to the fact that changing the IMEI is illegal in most countries.
I'm afraid you'll have to search elsewhere for assistance with this issue.
Thread closed.
Hi,
I hope all are well.
Is there anybody can help me to recover IMEI of my oukitel K6, IMEI number has been lost during installing the firmware,
It is very bad to me, my cell is not communicating with service provider
I have tested 3 most methods i have find on internet
1 : usind engineering mode
2: Mobile uncle app does not support backup and restore function
3: By dialing code on pad eg. *#46736443# this is sample
If anybody is capable and expert in android please help me to get rid of this issue.:crying::crying::crying:
I have an Lenovo k3 note I installed many custom rom but is always shows invalid imei can any one help me I even tried chamelieon app and many more ways pls I want to use custom roms so help me fast
If you know the IMEI ( it's printed at least on the box the phone came with ) then look inside here:
How to Fix Invalid IMEI Problem in an Android Device ?
Fix and solve the problem of invalid IMEI in your android device causing no signal & no network with this effective method for Mediatek phone
www.digitbin.com