Hello everyone,
I have a problem with my Galaxy S6.It is stuck on Samsung logo screen and won't turn on.Also,my phone isnt recognized by any computer.I tried a lot of USB cables,a lot of computers,i installed the drivers,tried with kies,kies 3(drivers included),Smart Switch with automatic driver instalation,tried everything and my S6 is still not recognized by pc.I cant turn on my phone to activate usb debugging or something and i cant install a custom rom or a official rom?What can i do to fix my phone?is it another way to fix the logo screen stuck without connecting the phone to a computer?tried installing a rom , but it says "external blablabla is deactivated" or something like this
iuliflr said:
Hello everyone,
I have a problem with my Galaxy S6.It is stuck on Samsung logo screen and won't turn on.Also,my phone isnt recognized by any computer.I tried a lot of USB cables,a lot of computers,i installed the drivers,tried with kies,kies 3(drivers included),Smart Switch with automatic driver instalation,tried everything and my S6 is still not recognized by pc.I cant turn on my phone to activate usb debugging or something and i cant install a custom rom or a official rom?What can i do to fix my phone?is it another way to fix the logo screen stuck without connecting the phone to a computer?tried installing a rom , but it says "external blablabla is deactivated" or something like this
Click to expand...
Click to collapse
Greetings and welcome to assist. Did you do anything to your phone before the bootloop? Also if you put your phone in download mode is it recognised in kies/smartswitch emergnecy firmware recovery ?
Regards
Sawdoctor
Tried to unroot the phone before.The USB/charging port is broken,fast charghing isnt working anymore,thats why the phone isnt recognized at all.I will change the broken piece then it should be recognized by pc and i can reinstall the android.also'the motherboard can be damaged.anyway,the phone quality is very bad,i had a lot of problems with it,ill never buy a Samsung again.
Related
Hi there, my phone is soft bricked and freezes at the Samsung logo when booting up.. been reading / trying all sorts but can't seem to resolve it so thought i'd come here for help.
Windows or Odin wont recognize my device even though I have the latest Samsung Drivers installed, Windows is saying 'USB Device not recognized' and that it may have malfunctioned.
Could I have messed up the phones USB drivers which is why they're only half working? If so is it possible for me to put something onto my SD card to then install through CWM?
Any help is much appreciated as this is really starting to frustrate me.
I usually keep flashing ROMS.
This time in sheer confidence I didnt charge the battery full.
I was switching from mokee 4.4 to CM11.
I wiped everything for a fresh install and unfortunately CM11 didnt install.
The tab restarted and now it wont go into recovery. what just happened?
It is just showing logo and I cannot get into Odin more either.
The tab had about 30% battery when it shut off and I cannot reach a charger for it for the next 4 hours.
Can I switch it off in any way to save battery?
the phone has switched off now. Is service center the only alternative? the tab was rooted with mokee installed.
devarshi84 said:
the phone has switched off now. Is service center the only alternative? the tab was rooted with mokee installed.
Click to expand...
Click to collapse
Try charging it when you have time and then try re flashing the stock Rom before taking it to service center
will the tab 2 charge without a recovery or ROM in place?
devarshi84 said:
will the tab 2 charge without a recovery or ROM in place?
Click to expand...
Click to collapse
I think it should
Ok, the tab2 is charging. thank you
I installed all the necessary drivers and odin and recovery on my laptop.
The tab2 is giving error on pc (this device wont start) mtp uSB. THe tab is stuck at 'samsung p3100' logo.
If it is any help, I have a working p3100 also running on stock firmware.
what should be my next step? I think I can manage if only I can get odin to recognize my phone or get into recovery (both of which seem to be missing.)
devarshi84 said:
Ok, the tab2 is charging. thank you
I installed all the necessary drivers and odin and recovery on my laptop.
The tab2 is giving error on pc (this device wont start) mtp uSB. THe tab is stuck at 'samsung p3100' logo.
If it is any help, I have a working p3100 also running on stock firmware.
what should be my next step? I think I can manage if only I can get odin to recognize my phone or get into recovery (both of which seem to be missing.)
Click to expand...
Click to collapse
Try reinstalling drivers
@shsagnik : Thank you very much for helping out.
I got installed all drivers by using the other P3100. But when I connect the bricked p3100, pc doesnt install MTP USB drivers. Under device manager it says " failed to start".
ODIN doesn't recognize it. either.
My mistake was I flashed everything on the phone including the internal memory.
PS: Can I force ODIN to recognize my phone?
Ok, my almost bricked device is back and runnning.
This might just help somebody. but my android handset was on a logo only mode. something in the combination of
Attaching it to pc (windows 7 64-bit)
re-installing and rejigging drivers
trying to let ODIN identiify
connecting via Samsung kies (I also tried restore on kies).
connecting a working android phone instead of the dead phone with pc to find and install drivers.
worked.
PS: I also let it sit dead powered off (worked only when charger was attached) for a whole day before trying to boot into recovery or bootlaoder (both worked).
devarshi84 said:
Ok, my almost bricked device is back and runnning.
This might just help somebody. but my android handset was on a logo only mode. something in the combination of
Attaching it to pc (windows 7 64-bit)
re-installing and rejigging drivers
trying to let ODIN identiify
connecting via Samsung kies (I also tried restore on kies).
connecting a working android phone instead of the dead phone with pc to find and install drivers.
worked.
PS: I also let it sit dead powered off (worked only when charger was attached) for a whole day before trying to boot into recovery or bootlaoder (both worked).
Click to expand...
Click to collapse
Awesome, now please change the title to solved
Hello,
I have bought a new Samsung Note 8 and took the sim Card from the S8+ out and changed it to the Note 8.
The S8+ is rooted and the ROM from CARHD is flashed.
After the new boot from my S8+ there stands in small letters : CUSTOM BINARY BLOCKED BY FRP
After that the S8+ powers down.
I thought no problem and wanted to initialize the S8+ with smart switch.
and now the problem : The S8+ does not connect to any PC in download mode. And i can not boot into recovery mode.
I tried it on 3 different PC´s with the original cable installed all drivers completly new. But no detection anymore. (unknown USB device)
The Note 8 is always detected but not the S8+
Does anybody have an solution for this or is the phone completly dead ?
I don´t know how i can try to get on.... I would be happy for every help or solution i could try.
Thanks in advance
Does really no one know what i can do ????
Can you boot to the download screen? You get to it by using the bixby+vol down+power. If so, you can use Odin to install an official rom or install twrp recovery and install a custom rom
Hello,
I can boot to download mode but the PC does not detect the phone right...it is always unknown usb device. That´s the big Problem. So i am not able to Flash anything.
Only suggestions would be to either uninstall and the re-install the Samsung mobile drivers on your 'puter or try another 'puter if you have one. Sounds like it's related to the pc and not the phone.
If you have read what i have written ... I tried it on 3 differnet PC´s and every other phone is detected. I think the phone is dead. I reinstalled also all Drivers.
The only way to get out of it is to find a way to detect the phone again.
OK - when you are in download mode and connected to Odin, does your phone show up as an activated ID COM port?
Hello, no it is an unknown usb device ! Thats the Problem. !
Hello guys, I'm really STUCK with the galaxy S6 (G920F) at the moment.
A friend gave it to me he said it suddenly turned off while he was playing a game and couldn't boot anymore.
I can't turn it off, it will keep on turning on automatically.
I can't go into recovery mode.
I can only go into download mode and flash a firmware with odin
I flashed the stock firmware with the latest odin and it flashed successfully. But it's still stuck on the Samsung logo (powered by Android) and won't boot into recovery or do anything at all.
So I read it could be the battery, so I bought a new one and replaced the battery.
But the problem remains. On Windows 7 x64 it's detected as "Gadget Serial" and "SAMSUNG Mobile USB CDC Composite Device" when I'm in download mode.
Odin detects the phone fine.
I then tried using Samsung Kies, and Samsung Smart Switch. Samsung Smart Switch detects an "unsupported device" and Samsung Kies doesn't detect anything at all and is stuck at "connecting...".
I don't have any ideas anymore and I fear it's a dead flash chip or any other board malfunctions.
It has never been rooted or had installed something like a custom rom. It's 100% stock / stuck..
Any suggestions maybe? Pleasee?
Hello I'm umesh..
I have a Samsung and micromax smartphone.
Whenever i try to power on the Samsung phone it stuck in Samsung Logo (its running Android Jellybean).
And the Micromax phone is unresponsive to any button press, it just shows logo when you plug it in the charger.
I tried odin3 & spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....:crying:
How can i repair it, both of the phones are NOT physically damaged, All fine.:good:
They were in working condition, few months before, then i don't know what happened, i think the OS software crashed.