[Guide] Battery Problems Fix |Deep Sleep Fix & More - Xiaomi Redmi Pro Guides, News, & Discussion

Battery Problems Fix |Deep Sleep Fix & More
DISCLAIMER
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you
I noticed that the HELIO x20 is quite power hungry chip and I created some tweaks to release the real power of battery + fix some bugs that are created by Xiaomi™ itself....
Some examples are:
1. Everyone has noticed that Redmi Pro has big battery drain in deep sleep (standby mode)
2. I dug around XDA MIUI devices forums for other devices and found out that Xiaomi MIUI roms use a service called 'perfservice' to control the CPU and can sometime be a hit and miss, so I did something
DISABLE PERFSERVICE and MY BATTERY LIFE HAS IMPROVED DRAMATICALLY.
What happens when perfservice is disabled is the cpu is controlled by MTK's cpu manager (not sure what it is called) and uses the stock interactive governer (which is good).
Now its fixing time
STEP ONE
this is for Redmi Pro devices only (Redmi Note 4 too)
1.Download View attachment 69TweaksOne.zip & View attachment 69TweaksTwo.zip
and flash them through TWRP Recovery.
AWARE
Flash 69TweaksOne first then flash 69TweaksTwo
Description: This will fix 1.deep sleep battery drain + 2.disable perfservice + 3.some other tweaks.
STEP 2
If you only have 1 SIM, it is highly recommended to go into single SIM mode to turn off the second modem service. Edit build.prop existing line from:
persist.radio.multisim.config=dsds to persist.radio.multisim.config=ss
STEP 3
Turn off Developer Options/Memory Optimization and MIUI Optimization. This is a legacy of the mcd service zram configuration that is disabled.
STEP 4
Remove inbuilt virus scanner(s)
Remove GuardProvider.apk and SecurityAdd.apk plus:
Code:
Code:
/system/lib64/libams-1.1.7-m-mfr.so
/system/lib64/libams-1.1.7-mfr.so
/system/lib64/libavast-utils.so
/system/lib64/libavast-vps-interface.so
/system/lib64/libavlasys.so
/system/lib64/libavlm.so
/system/lib64/libavlurl.so
STEP 5
Greenify + Amplify -(Need Xposed )
Install Greenify and Amplify and enable them on Xposed Framework
Take a look at this thread HERE
This thread is just a copy paste from other forums which are
1-Thanks to Jajk
2-Thanks to asusm930
3-Thanks to CosmicDan
that I wanted to post here for our Redmi Pro which is a really good device (it's Redmi's flagship isn't it). Redmi Pro has a good battery life and without modifying and now it will be Super Good .
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hit THANKS button for me please​

Very nice, thnx.

kremmit said:
Very nice, thnx.
Click to expand...
Click to collapse
???

Delete the Whetstone.apk and it's libs
Code:
libwhetstone_jni.so
libwhetstone_sdk.so
Click to expand...
Click to collapse
Do i delete them from lib and lib64?
Deleting from both it crashes battery saver at next boot.

kremmit said:
Do i delete them from lib and lib64?
Deleting from both it crashes battery saver at next boot.
Click to expand...
Click to collapse
1.on Lib section
2.what?

kristi6.9 said:
1.on Lib section
2.what?
Click to expand...
Click to collapse
so delete from lib folder, ok.
if you delete from lib and lib64 folder the battery saver will crash after you reboot the phone.

kremmit said:
so delete from lib folder, ok.
if you delete from lib and lib64 folder the battery saver will crash after you reboot the phone.
Click to expand...
Click to collapse
Ok , I have deleted only the lib ones not lib64.

Can You give me instructions how to complete this guide this is first time ever doing this, I have knowledge to do this. But please explain me proces will I edit some text script files or what?

reny123 said:
Can You give me instructions how to complete this guide this is first time ever doing this, I have knowledge to do this. But please explain me proces will I edit some text script files or what?
Click to expand...
Click to collapse
I have explained as good as I can if you cant understand it please make some searches on Google

Hi
can you explain how to do step 4?
just delete these files? or should I run some script? or maybe uninstall these apps using lucky patcher?
on step 5 can you provide direct link for XPOSED that works on XAIOMI REDMI PRO, I saw there version for Galaxy only.
Thanks
Shlomi

Why is removing whetstone not on the list anymore?

remove miui sistem and you will se awsome battery life

mr-blue001 said:
Hi
can you explain how to do step 4?
just delete these files? or should I run some script? or maybe uninstall these apps using lucky patcher?
on step 5 can you provide direct link for XPOSED that works on XAIOMI REDMI PRO, I saw there version for Galaxy only.
Thanks
Shlomi
Click to expand...
Click to collapse
just delete them..........
for xposed I will make a thread soon

kremmit said:
Why is removing whetstone not on the list anymore?
Click to expand...
Click to collapse
it is not that needed

criszz said:
remove miui sistem and you will se awsome battery life
Click to expand...
Click to collapse
have you tested it......or any bugs

Thanks but didn't understand if steps after zips flash are mandatory or optional...

epiteto said:
Thanks but didn't understand if steps after zips flash are mandatory or optional...
Click to expand...
Click to collapse
it depends ......example ( step 2 should be used only if you use one sim)

kristi6.9 said:
just delete them..........
for xposed I will make a thread soon[/QUO
Thanks
I'm waiting for this post.
Click to expand...
Click to collapse

kristi6.9 said:
it depends ......example ( step 2 should be used only if you use one sim)
Click to expand...
Click to collapse
Done it even if after step one the battery life was better . So modified build.prop
Step three done but reverted because of FC of settings when tried to go to settings/battery/ battery usage ( globe rom xiaomi .eu based).
Other steps not performed at the moment. Great results, it seems my battery can get empty in 150% of previous time and usage !!
Many thanks for this.

epiteto said:
Done it even if after step one the battery life was better . So modified build.prop
Step three done but reverted because of FC of settings when tried to go to settings/battery/ battery usage ( globe rom xiaomi .eu based).
Other steps not performed at the moment. Great results, it seems my battery can get empty in 150% of previous time and usage !!
Many thanks for this.
Click to expand...
Click to collapse
??

Related

[ROM] Galaxy S5 UI for our Galaxy Tab 3

Code:
*
* Your warranty is now void -------------- Flashing this rom at your own risk
* If you aren't familar with flashing custom roms ------------- STOP HERE!!
* The roms comes as it is----no workarounds----no extended development
* If you wish to change or develop this rom -------------- send a P.M. to me
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. No bloatware
2. Rooted
3. Tweaked
1. Decrease boot time
2. Power saving
3. Telephony/ring Tweaks
4. Proximity (Disable blackscreen issue after call)
5. Audio & video recording
6. Faster streaming videos
7. Net speeds
8. Better signal (wifi, 2g, 3g)
9. Better call voice quality
10. Benchmark tweaks
4. Battery Optimised
5. Blackhawk's NEXT kernel 2.4
6. S5 Look like (UI, Sounds, Wallpaper and Launcher)
7. Ideal for Gaming
1. Enable power saving
2. Decrease brightness
3. Turn off the Wifi, Bluetooth, GPS, etc when you don't need that.
4. Remove unwanted apps
5. Use only 2G Network
6. Set your screen timeout to the shortest length possible
7. Don't use auto brightness
http://postimg.org/gallery/29aw20e4e/
1.Copy the ZIP File to the internal card
2.Wipe Data&Cache&System
3.Install the Zip
4.Install the blackhawk-next-kernel-2.4-t311.zip and mali-400-r3p2-01rel3-api29-t31x.zip from here http://forum.xda-developers.com/devdb/project/?id=5210#downloads
5.Finally REBOOT
Don't forget to flash the latest edition of the Philz Recovery!!!! : https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt013g/philz_touch_6.19.3-lt013g.tar.md5/
https://drive.google.com/file/d/0BwWGbBx-jMwvVDdNVVltRkFDY2s/view?usp=sharing
Guide. How to restore warranty: http://forum.xda-developers.com/galaxy-tab-3/general/guide-restore-warranty-galaxy-tab-3-3g-t2869141
XDA:DevDB Information
Galaxy S5 UI for our Galaxy Tab 3, ROM for the Samsung Galaxy Tab 3
Contributors
t-shock
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Custom Recovery Installed & Brain!
Based On: Stock 4.4
Version Information
Status: Stable
Current Stable Version: V5
Stable Release Date: 2014-11-10
Created 2014-08-26
Last Updated 2015-01-04
Changelog
V1:
Intial release
V1.1:
Minor bugs fixed
Installation bug fixed
V2:
Added Tweaks (a ton!)
V2.1:
Minor bugs fixed
Also more apps removed
V3:
4.4!!!
V3.1:
Minor bugs fixed
V4:
S5 Launcher, Icons, UI, sounds
More battery friendly
Lighter
Ideal for gaming
Smallest zip file, because I removed MORE APPS!!!!
Reserved
Any chance for the sm-t315 (LTE)? ?
gx3k said:
Any chance for the sm-t315 (LTE)? ��
Click to expand...
Click to collapse
Sorry man
Can't do that
t-shock said:
Hello to T311 users
I have just made a touchwiz rom, but this time I removed all bloatware (see attachment)
Sorry about WIND bootanimation, I will try to remove it in the next release
Click to expand...
Click to collapse
Hello! Does this work with blackhawk dual boot kernel by ketut? I tried replacing my sammy which was my primary ROM but does not seem to get installed! Please clarify!
gkvidhu1979 said:
Hello! Does this work with blackhawk dual boot kernel by ketut? I tried replacing my sammy which was my primary ROM but does not seem to get installed! Please clarify!
Click to expand...
Click to collapse
I tried to install too and I had the same problem. Please wait to upload a restore version of this rom
Link is up!!
Replaced my stock with this tweaked ROM. Great and fast ROM. Thanks a lot for your efforts. Using this with CM 4.4.4 by Ketut. Thanks again for this ROM.
Edit: Disable MD5 checksum in philz recovery!
Sent from my SM-T311 using XDA Free mobile app
V2 damaged? I open on windows..
it says ;
The archive is either in unknown format or damaged
Im very interested in this rom, but as a newbie i dont know how to install. can you pls show me step by step?
also, the two files i downloaded appear to be corrupt.. where can i re-download them?
tks a lot for your help..!
subharkah said:
V2 damaged? I open on windows..
it says ;
The archive is either in unknown format or damaged
Click to expand...
Click to collapse
cuonguq said:
Im very interested in this rom, but as a newbie i dont know how to install. can you pls show me step by step?
also, the two files i downloaded appear to be corrupt.. where can i re-download them?
tks a lot for your help..!
Click to expand...
Click to collapse
I am on holiday until 4th August so wait to re-uploaded at 5 August
New release!!!!
new release!!!!! V2.1​
Very interested in this but have a question. Can anyone confirm if this works on T310?
TardyKilla said:
Very interested in this but have a question. Can anyone confirm if this works on T310?
Click to expand...
Click to collapse
It might work!
Please tell me the problems that you faced so I can make a patch for t310
Im gonna dl it now and try it on my t310. Ill let ya know.
Sent from my SM-T310 using xda premium
roninep said:
Im gonna dl it now and try it on my t310. Ill let ya know.
Sent from my SM-T310 using xda premium
Click to expand...
Click to collapse
TardyKilla said:
Very interested in this but have a question. Can anyone confirm if this works on T310?
Click to expand...
Click to collapse
Please let me know if
WIFI
Bluetooth
Microphone
Speakers
Camera (front & back)
Soft & Hard Keys
worked
If you faced any type of problem ( error while installing or fc) please let me know
Anwser on PM
Im backing up now, and will let you know within the hour.
Looking forward to it.
EDIT:
V2.2 is working on the T310.
I used Philz recovery (6.48 I think - the latest)
Wifi does not connect
Bluetooth does connect and works fine (paired with headphones)
Front/Rear cameras work as well as video - No gallery but Quickpic works fine
Soft and Hard keys work fine
Music player works
Havent gotten much else into it because I cant connect to wifi.
This this is FAST...boots quickly
EDIT 2:
PC recognizes it and I can access the internal and external drive via USB.
Did not charge when hooked up to PC, but charges fine when plugged into AC.
t-shock said:
Please let me know if
WIFI
Bluetooth
Microphone
Speakers
Camera (front & back)
Soft & Hard Keys
worked
If you faced any type of problem ( error while installing or fc) please let me know
Anwser on PM
Click to expand...
Click to collapse
Help Needed
I tried...
but
I get the message "MD5 mismatch"
I don't know what it means.....(sorry)
can you please guide me on this?
I have no problem backing up current rom and restore
I followed your installation guide
I had the same error message earlier when I tried it. same md5 mismatch.
I had downloaded the file 2.1 from my phone, extracted it, moved it into my tab, etc.
To fix it, I updated my Philz recovery to the latest one. 6.48.
I then downloaded the new 2.2 version by tshock into my computer.
I extracted it my computer, and then moved the folder to my Tabs sd card, into the
"clockworkmod/backup" folder.
it flashed perfectly then.
make sure you are on the latest philz. do all the extracting on your pc first, then move it over.
hope this helps.
Ed
also, I believe a "MD5 mismatch" error is when the downloaded file differs somehow from the original
one that was uploaded. whether it be a different size or different hash number (?), it is somehow different.
the original one is given a md5 number when it is uploaded, and after you download it, it should still be the
same number. if not, then its a mismatch.
choithestar said:
I tried...
but
I get the message "MD5 mismatch"
I don't know what it means.....(sorry)
can you please guide me on this?
I have no problem backing up current rom and restore
I followed your installation guide
Click to expand...
Click to collapse

[ROM] HydRom 3.1 Note 7 port for N910C

Hydrom 3.1 is out. I'm so glad.
The Rom is flying. Very stable. There are almost no problems. I am using for a week now.
The AOD and fingerprint do not work as well as in all Note7 port roms. So I removed AOD alltogether.
I did not try fingerprinting with 3 party software. Please comment when you try.
ROM has Turkish support. There is only one setting left in English.
Updated on 07.11.2016 at 03:00.
Corrected:
N7 camera reverted back to stock by me. Camera Note 4 original. All modes are working.
Heavly debloat by me ( You can install Galaxy apps, any internet browser you like etc. from the sources like Googleplay.)
The video call is working.
X-posed works.
Bluetooth is working.
Very very fast and smooth
New Android N transition effects (Change all effects to x0.5 in Developper settings for less glitches)
BUGS
Some launcher glitches
AOD
I am not a developer. I wanted to share. I use Rom in english
Flash the files in order than clear the Cache / Dalvik.
Good luck
FEATURES
Based on N930FXXU1DPE3
Debloated heavily
Deodexed
Glance, Samsung Themes(Wallpaper, themes, icon packs), Smart Select GIF, and more GraceUX features
Multi-language
Deodexed
Korean carrier bloatware, apps and files (like galaxy apps, samsung internet, samsung music, kids mode etc. are removed
Multi user support
Multi-window enabled apps
Official Multi-DPI(560,640)
Force-touch-enabled launcher ,Thanks to @thereassaad
5-Way reboot menu
All apps on home screen support
Note7 Apps, features, themes, etc
De-Knoxed( )
ADDITIONAL APPS (by me)
Es File Explorer Pro
TouchPal keyboard
3C Toolboc Pro
Amplify
Greenify Pro
LuckyPatcher
SuperSuPro
Version Information
Status: Light version
Current Version: 3.1
Release Date: 2016-11-01
***All credits goes to SirHydarnes***
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshots:
http://uploads.tapatalk-cdn.com/20160725/45b700a6fc66c296448ebb1b0cdc456b.jpg
http://uploads.tapatalk-cdn.com/20160725/0c30ee668df2b15916e6ad9500d8d6b6.jpg
http://uploads.tapatalk-cdn.com/20160725/45b700a6fc66c296448ebb1b0cdc456b.jpg
http://uploads.tapatalk-cdn.com/20160725/cd30757da177a455f3c058ad0b2b5714.jpg
[/quote]
DOWNLOAD:
Mod Edit
Links removed contained warez
Do i need to download all the files and flash one by one?
shamsulaswad said:
Do i need to download all the files and flash one by one?
Click to expand...
Click to collapse
Yes
Hello, this ROM is also compatible with the version N910C?
pickandrew said:
Hello, this ROM is also compatible with the version N910C?
Click to expand...
Click to collapse
It's already for N910C (Note 4 Exynos)
Yeah!!!!! Thank you si much i Will try it ASAP
pakom8 said:
Yeah!!!!! Thank you si much i Will try it ASAP
Click to expand...
Click to collapse
Awaiting your feedback,lol
there´s no other links to download? i have exceed the limit on Mega
Is that rom works with latest taxelop karnel
pakom8 said:
Yeah!!!!! Thank you si much i Will try it ASAP
Click to expand...
Click to collapse
pakom8 said:
there´s no other links to download? i have exceed the limit on Mega
Click to expand...
Click to collapse
You created the free mega account?
shamsulaswad said:
Awaiting your feedback,lol
Click to expand...
Click to collapse
its freaking amazing just a few hours of use but is very smooth
try this bootanimation of Note 7 and it works perfect!!
http://forum.xda-developers.com/note-7/themes/samsung-note-7-white-boot-animation-t3446241
pakom8 said:
its freaking amazing just a few hours of use but is very smooth
try this bootanimation of Note 7 and it works perfect!!
http://forum.xda-developers.com/note...ation-t3446241
Click to expand...
Click to collapse
Link not found bro..
How about battery life?need to wait several cycles to make sure?
shamsulaswad said:
Link not found bro..
How about battery life?need to wait several cycles to make sure?
Click to expand...
Click to collapse
here is the correct link: http://forum.xda-developers.com/note-7/themes/samsung-note-7-white-boot-animation-t3446241
Battery Life.. is correct we need to wait several cycles to make sure, but it feels very similar to Stock
Thank you I will test it
ctorbaoglu said:
ADDITIONAL APPS (by me)
Es File Explorer Pro
TouchPal keyboard
3C Toolboc Pro
Amplify
Greenify Pro
LuckyPatcher
SuperSuPro
Click to expand...
Click to collapse
These apps are not allowed within a ROM for distribution.
LuckyPatcher is an app hacker, WAREZ forbidden on XDA.
Pro versions are individual licenses not for multiple use.
I am finishing downloading all files.
I will create a single flashable zip with all files so there is one complete flash file. The above apps will be removed. I will provide the OP will a mirror download with the single file if desired.
I will flash and see if apps are included.
will it be okay to flash it on N910S ( exynos ) version.?
Would flashing order will be as it available in download links ?
Gapps needs to flash separately ?
Bootloop.... again
:crying: I cannot for the life of me understand why I get bootloop with HydRom on my N910c. All other S7/N7 ports work fine. I had the same problem with 1.2 and never used it as a result. Now i flashed these files in sequence and rebooted, got the same issue. Phone vibrates quickly within a few seconds of starting the rom and reboots without warning.
usju said:
:crying: I cannot for the life of me understand why I get bootloop with HydRom on my N910c. All other S7/N7 ports work fine. I had the same problem with 1.2 and never used it as a result. Now i flashed these files in sequence and rebooted, got the same issue. Phone vibrates quickly within a few seconds of starting the rom and reboots without warning.
Click to expand...
Click to collapse
Try clearing Cache / Dalvik after flashing the files in sequence.

[UPDATE][ROM][CMX11] CMX11 V10.1 for Galaxy Y GT-S5360-fast cm11 experience

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is . . . still vaild for this old phone ? *
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hi guys. Currently,I was searching for some nice rom,I found that the galaxy ace-i has CMX11 v10.1 with many bugs fixed but our device only have CMX11 V10.0,so I bring it to our device but I kept it for myself a long time so now I decided to share it,here is it !​
So what's new in CMX11 V10.1
Here you are :
SMS bug fixed
Browser issues are now gone
Some part of the gapps,if you want to have the play store and the gms core,get it from the Download part
Viper4AndroidFX changed to CMX Sound Panel
Camera app is stable
Download
ROM
Play store
GMS core​
Credits :
-androidarmv6
-bieltv3
-ROM-PacMe
-omerdeniz99
-CyanogenMod
-sohamsen(for suggestions and CMX Sound Panel App)
-psyke83
-Alberto96
-Spacecaker
-Lopicl.00
-mohammad.afaneh(special thanks for TWRP recovery and Kernel)
-vdhero(me)
-thedeadfish59
it's super sh#t rom thanks <3
(I don't recommend using it)
Teals53 said:
it's super sh#t rom thanks <3
(dont use)
Click to expand...
Click to collapse
So wjay do you mean ? You recomended to use it or not ? The "(don't use)" one make me confused
Teals53 said:
it's super sh#t rom thanks <3
(I don't recommend using it)
Click to expand...
Click to collapse
why not ? It's smooth,have lots of free space in data. It's not my rom anyway,I just bring you guys an update of the cmx11 that omerdeniz99 brought to us(cmx11 v10.0) and this project is discontinued
vdhero said:
why not ? It's smooth,have lots of free space in data. It's not my rom anyway,I just bring you guys an update of the cmx11 that omerdeniz99 brought to us(cmx11 v10.0) and this project is discontinued
Click to expand...
Click to collapse
Yeah I Know And no stable ROM for this phone
Teals53 said:
Yeah I Know And no stable ROM for this phone
Click to expand...
Click to collapse
Then buy a f*cking god damn new phone instead of telling people that their roms are sh*itty
vdhero said:
Then buy a f*cking god damn new phone instead of telling people that their roms are sh*itty
Click to expand...
Click to collapse
its a good idea but ı love my phone xd
Good new: I sent omerdeniz99 an email to take over and mantain this rom. He finaly allow me so from now. I'll continue this project and support more devices. Hurray!
Aktivation of whatsapp
WhatsApp didnt activated when write to my number
calikusu said:
WhatsApp didnt activated when write to my number
Click to expand...
Click to collapse
I've tested. It works for me.
Hello all
I installed it yesterday : ok
I installed the apk for GMS & Google Play Store : ok
But, il can't install anything from Play Store.
I'm connected, I can search for an app, but when I try to install, it remain on "installation" and the progress bar doesn't move, no progression, no installation ?
Any idea for this problem ?
Thk
Abou Ilyès said:
Hello all
I installed it yesterday : ok
I installed the apk for GMS & Google Play Store : ok
But, il can't install anything from Play Store.
I'm connected, I can search for an app, but when I try to install, it remain on "installation" and the progress bar doesn't move, no progression, no installation ?
Any idea for this problem ?
Thk
Click to expand...
Click to collapse
Just leave it there. It's updating Google play services.
vdhero said:
Just leave it there. It's updating Google play services.
Click to expand...
Click to collapse
Sorry, I don't understand
which version of whatsapp did you use? cuz im stuck at connecting on verifying number
how do I install the gapps apks?
it says that it can't open the files
Coleby said:
how do I install the gapps apks?
it says that it can't open the files
Click to expand...
Click to collapse
Your files are corrupted. Download it and install again
Good ROM, but I have a problem. I can't create script for move apps to SD with Link2SD. Any solution?
danielcuervog said:
Good ROM, but I have a problem. I can't create script for move apps to SD with Link2SD. Any solution?
Click to expand...
Click to collapse
Open root explorer, go to system/etc/init.d , find the file that has Loopysmoothness and delete it then reboot and you're good
Just tried to install your rom and it's not working. Status 7 error is the issue..
vdhero said:
Open root explorer, go to system/etc/init.d , find the file that has Loopysmoothness and delete it then reboot and you're good
Click to expand...
Click to collapse
Still not working

[ROM] [UNOFFICIAL] [7.1.1] [BETA] LineageOS 14.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I present to you, LineageOS for the X2 . Lineage is one of the premier custom ROMS for Android with many extra features and customizations. This build was ported by myself using bits and pieces from a few separate unofficial builds for different Huawei devices. I did some Framework edits to add/remove features. I hope you enjoy the rom and please hit the thanks button if you like what I've done. Thanks to all who have donated, it's never required but much appreciated and thank you to @Djiban for providing me with an X2 to keep the developing going and to @audioralf for all the testing and bug findings on all of my roms and everyone else for your help. I am not responsible for bricked devices, dead SD Cards or if your phone melts and burns in your hand
Thanks to spiritx & T1mb3 for the original builds.
Features
AdAway
Kernel Adiutor
Footej Camera
Init.d Support
Permissive SeLinux
Pre-Rooted w/Magisk
Xposed Compatible
Instructions
You must already be on Android 6.0 (B2xx) to flash this rom
Boot into TWRP
Do a backup
Wipe and flash ROM
That's it, you're done!
First boot will take a few minutes, please be patient.
Bugs
LED notification light works but stays solid
Only one sim is supported
Signal icon always shows one bar
Battery drains a little faster than stock EMUI
Read the Changelogs for information
Download
https://androidfilehost.com/?fid=5862345805528050336
Gapps
http://opengapps.org/
Changelogs
3-5-18: Beta 1
7-17-18: Beta 2
-Fixed Mobile Data
-Removed FM Radio
-Removed Camera & Gallery for now as they don't and may never work due to no custom Kernel for Nougat
Reserved
Download link shows "KangVIP Slim B212v4 Xposed "
goon-heaven said:
Download link shows "KangVIP Slim B212v4 Xposed "
Click to expand...
Click to collapse
Sorry, i just fixed that. If you go to androidfilehost.com and search my username you can always see all of my files even if they aren't posted on here yet.
Thanks. I just tried searching for ajsmsg78 at androidfilehost.com, and it only showed 8 TWRP zips. Any ideas?
goon-heaven said:
Thanks. I just tried searching for ajsmsg78 at androidfilehost.com, and it only showed 8 TWRP zips. Any ideas?
Click to expand...
Click to collapse
https://androidfilehost.com/?w=profile&uid=24269982086988507
My supported devices is on the right. The X2 is under Generic Device/Other.
Wipe and flash ROM
Click to expand...
Click to collapse
in general wich WIPE do you recommand (depending on which kind you are coming from) ?
thanks
Djiban said:
in general wich WIPE do you recommand (depending on which kind you are coming from) ?
thanks
Click to expand...
Click to collapse
If you're coming from any rom other than this one wipe data/system/caches
ajsmsg78 said:
If you're coming from any rom other than this one wipe data/system/caches
Click to expand...
Click to collapse
Thank you very much, AJ
Is there a GAPPS suggested?
Pico ok??
mouse723 said:
Thank you very much, AJ
Is there a GAPPS suggested?
Pico ok??
Click to expand...
Click to collapse
Open gapps, whichever you want, just make sure it's 6.0 that you're downloading.
New life!
Thanks ajsmsg78! ROM working good so far! Push working great! GPS... I'll let you know in a few days! Battery seems to drain a little faster. Not a big deal here... No double tap to wake options? Don't really need it... Phone is very stable!
Steamer2499 said:
Thanks ajsmsg78! ROM working good so far! Push working great! GPS... I'll let you know in a few days! Battery seems to drain a little faster. Not a big deal here... No double tap to wake options? Don't really need it... Phone is very stable!
Click to expand...
Click to collapse
I couldn't get dt2w working so I removed it from the framework. It's something with the kernel and that's where my extreme lack of kernel knowledge shows
There are actually a few apps in the play store where you can use the proximity sensor to wake the phone (wave your hand over the sensor to unlock) but dt2w does consume more battery.
Xposed installed and working here. Thank you for great ROM!
ajsmsg78 said:
I present to you, LineageOS for the X2 . Lineage is one of the premier custom ROMS for Android with many extra features and customizations. This build was ported by myself using bits and pieces from a few separate unofficial builds for different Huawei devices (Piaooops X2 build, the build for the P8 and Honor 7). I did some editing of the framework to add/remove features. I hope you enjoy the rom and please hit the thanks button if you like what I've done. Thanks to all who have donated, it's never required but much appreciated and thank you to @Djiban for providing me with an X2 to keep the developing going and to @audioralf for all the testing and bug findings on all of my roms and everyone else for your help. I am not responsible for bricked devices, dead SD Cards or if your phone melts and burns in your hand
Features
AdAway
Kernel Adiutor
Footej Camera
Init.d Support
Permissive SeLinux
Pre-Rooted w/Magisk
Xposed Compatible
Instructions
You must already be on Android 6.0 (B2xx) to flash this rom
Boot into TWRP
Do a backup
Wipe and flash ROM
That's it, you're done!
First boot will take a few minutes, please be patient.
Bugs
You tell me
Read the Changelogs for information
Download
https://www.androidfilehost.com/?fid=962187416754465742
Gapps
http://opengapps.org/
Changelogs
3-5-18: Initial build
Click to expand...
Click to collapse
Is it possible to dirty flash over cyanogenmod by gagua?
I think about my wifes phone to flash.
Thy, Ray
ajsmsg78 said:
I couldn't get dt2w working so I removed it from the framework. It's something with the kernel and that's where my extreme lack of kernel knowledge shows
There are actually a few apps in the play store where you can use the proximity sensor to wake the phone (wave your hand over the sensor to unlock) but dt2w does consume more battery.
Click to expand...
Click to collapse
Notification led doesn't blink but does stays on...
Hi! And why one SIM card?
goon-heaven said:
Xposed installed and working here. Thank you for great ROM!
Click to expand...
Click to collapse
which version of xposed did you install? I tried version 89 and didn't get it to work.
Thanks in advance
Wolfgang
version 89_sdk23_arm64 using installer 3.1.5
what exactly did not work?
goon-heaven said:
version 89_sdk23_arm64 using installer 3.1.5
what exactly did not work?
Click to expand...
Click to collapse
thanks, that' what I used.
I got a message, that xposed couldn't be activated .
I'll give it another try.
Thanks - Wolfgang
Yes, I got that message too. Cant remember exactly what I did, I think I rebooted, and tried a couple of times, then it worked.

Pixeldust Rom [GSI Pie 9.0](Volte){all features working}

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
Earlier this ROM is exclusively built for pixel devices and Android one devices having ab partions but now their latest release also focus on Aonly devices also,So I decided to make it boot on our lovely whyred as it offers many different features along with complete pixel like experience that all u guys will love to have on ur device.
bugs
1.it will tell u to install PQA1 vendor on each reboot but simply ignore that.no need to worry.
2.Encryption.
3.You will tell.
Click to expand...
Click to collapse
Use only these links for Whyred, not that provided in other thread that thread is made exclusively for Mi A1.
Pre-requisite:
1.Mokee ROM(pick latest):
https://download.mokeedev.com/?device=whyred.
2.System image .xz file:
http://bit.ly/2S3bIJN
3.to get Volte working install this APK after boot and then reboot:
http://bit.ly/2qSh4Mj
4. For camera 2api flash this zip:
http://bit.ly/2QOK7vz
5.Latest firmware and Twrp.
Click to expand...
Click to collapse
Make sure that you had unzipped the .xz file before moving further
How to boot:
1.clean wipe(dalvik,data,cache,system,vendor).
2.install latest Mokee ROM.
3.boot into it and then return to recovery.
4 Now wipe dalvik, data ,cache,system.(Not vendor)
5.install pixel dust system image.
6.reboot.
Click to expand...
Click to collapse
For gcam head over to arnova's latest pixel 3 gcam 6.0.013 build After enabling camera 2 API.
Link(incase):
http://bit.ly/2DtYuSa
What's working in gcam :
All of the things including slowmo also
but back camera uhd 4k video recording not working.
For features head over to link shared below from where this arised.
XDA: DevDB Information
I would like to thank amarbajpai for the thread:
Link to thread for features:
http://bit.ly/2PCW7DV
ROM OS Version: 9.x Pie
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: release two
Stable Release Date: 2018-10-25
Created 2018-10-25
Last Updated 2018-11-14
If I find any updates then I will drop down below in future
But still I will be just sharing this rom so for any improvement wait for new updates or talk to other skilled Devs.
Thank you for sharing and for this new rom
Is there customisations/features (like status bar network indicator,...) ?
bayad said:
Thank you for sharing and for this new rom
Is there customisations/features (like status bar network indicator,...) ?
Click to expand...
Click to collapse
Head over to the thread at last of the post.
Thanx for sharing.. I ll definitely going to flash it when I got my bootloader unlocked☺
Screenshots
Nitin890 said:
Head over to the thread at last of the post.
Click to expand...
Click to collapse
Oh sorry, I posted comment quickly without seeing the link
Great work BTW
Fully edit of navbar buttons like double click and long press?
jacobobbo said:
Fully edit of navbar buttons like double click and long press?
Click to expand...
Click to collapse
Please check
Anyone installed??
BTW U can use derp kernel of u want and lift to check phone gesture is occasionally working rest all is great.
MTP connection doesn't work on this rom
So.. I've done everything with instruction and my phone is rebooted to fast boot.... I've done this twice and the resoult ist 1 hour of wasting my time. Thanks !
jacobobbo said:
So.. I've done everything with instruction and my phone is rebooted to fast boot.... I've done this twice and the resoult ist 1 hour of wasting my time. Thanks !
Click to expand...
Click to collapse
Can u please tell which ROM and recovery u are using and what u exactly did because I am currently running this ROM without any problem.
mrcandy108 said:
MTP connection doesn't work on this rom
Click to expand...
Click to collapse
My feedback after few hours on this rom :
- MTP connection not working as said above
- The brightness leans towards the red
- No camera preinstalled
- No FM Radio
Hope all these bugs will be fixed in future builds
Please let me know the odd or best features of this ROM which u liked most.
For me I liked the breathtaking wallpapers,the Shishu nights dark theme and dark theme in file manager.
bayad said:
My feedback after few hours on this rom :
- MTP connection not working as said above
- The brightness leans towards the red
- No camera preinstalled
- No FM Radio
Hope all these bugs will be fixed in future builds
Click to expand...
Click to collapse
I can't change font on this rom. If i try replace folder font, my phone will get bootloop
Nitin890 said:
Please let me know the odd or best features of this ROM which u liked most.
For me I liked the breathtaking wallpapers,the Shishu nights dark theme and dark theme in file manager.
Click to expand...
Click to collapse
All features are great, even the wallpapers (but you cannot set a wallpaper for lockscreen ).
If all the bugs in my previous post are fixed, it'll be a great rom
mrcandy108 said:
I can't change font on this rom. If i try replace folder font, my phone will get bootloop
Click to expand...
Click to collapse
Try magisk module MidnightCore for that.
My device is also rebooting to fastboot.
I flashed the following Mokee Rom : MK81.0-whyred-201811181746-Nightly.zip
I use TWRP 3.2.3-1
I followed the steps exactly as in the instructions.
What am I missing?
Partha
partha_rc said:
My device is also rebooting to fastboot.
I flashed the following Mokee Rom : MK81.0-whyred-201811181746-Nightly.zip
I use TWRP 3.2.3-1
I followed the steps exactly as in the instructions.
What am I missing?
Partha
Click to expand...
Click to collapse
Use Twrp 3.2.3-0 posted on 7-31 on official Twrp website.
Or
if u are still not able to boot then I can post my Twrp backup of whole ROM but
do let me know that.
partha_rc said:
My device is also rebooting to fastboot.
I flashed the following Mokee Rom : MK81.0-whyred-201811181746-Nightly.zip
I use TWRP 3.2.3-1
I followed the steps exactly as in the instructions.
What am I missing?
Partha
Click to expand...
Click to collapse
Use Twrp 3.2.3-0 posted on 7-31 on official Twrp website.
Please read updated post
Or
if u are still not able to boot then I can post my Twrp backup of whole ROM but
do let me know that.

Categories

Resources