Related
**NOTE** For the SM-P900! However steps should be the same for SM-P905 EXCLUDING THE FILE TYPES (THEY ARE DIFFERENT DO NOT ATTEMPT TO USE THE FILES FOR THE SM-P900 OR BYE BYE TO YOUR NOTE 12.2 Pro because now you have a problem that may or may not be repairable/reversible). You just have to make sure you have the coordinating files for the process!
If anyone else has issues try this and these steps to complete the Root/Custom ROM/TWRP Recovery installations successfully for a "First time go":
1. Remove Kies and Kies3 files, related files, folders, and everything that has anything to do with the primary installation of either the two programs on your PC and your devices. When/if prompted, select the checkable box and elect not save any type of files... if you want to keep them save them OFF your main PC on a flash or removable storage device.
2. REMOVE ALL SAMSUNG DRIVERS AND REPLACE WITH ONLY OFFICIAL SAMSUNG DRIVES!!! THIS IS A BIG MUST!
3. Using your USB 2.0 cable and ports Install the Custom Rom "P900XXUANB3-RecoveryImg.tar" FIRST and flash it via ODIN 3.07 under the PDA checkbox that is "fixed" (so you noobs don’t make any soft bricks if this is your first attempt at rooting), and only use the ODIN 3.07 THAT COMES W/ CHAINFIRES AUTO ROOT .zip file and then unzip the folder to open ODIN 3.07 ONLY! This is only because I have read that there have been issues installing the SU via Chain Fires Auto Root Process... the file is called (currently as of 25 JUNE 2014) "P900XXUANB3-RecoveryImg.tar" PDA select it and then start when in DOWNLOAD MODE on your device. Manually select DOWNLOAD MODE if you have to BEFORE PRESSING START! Otherwise, one is just going to sit there and not accomplish anything.
http://forum.xda-developers.com/attachment.php?attachmentid=2591013&d=1392923580
http://forum.xda-developers.com/attachment.php?attachmentid=2591159&d=1392930654
http://forum.xda-developers.com/attachment.php?attachmentid=2775098&d=1401644348
4 Reboot back into DOWNLOAD MODE. Flash in ODIN 3.07 with the PDA section and select this file next to install: "openrecovery-twrp-2.7.1.0-v1awifi.img.tar"
5. In DOWNLOAD MODE and flash the file under the PDA box TWRP (OR CURRENT RECOVERY OF YOUR CHOICE THAT IS AVAILABLE)
6. AGAIN... Restart your device into DOWNLOAD MODE via ODIN 3.07 and select PDA and then finally root this: "CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5" Then you can backup, restore, flash anything, and be happy! YOU SHOULD FINALLY HAVE A SUCCESSFUL ROOT! Turn off and REBOOT into RECOVERY to see if TWRP stuck and then reboot to see if the SU stuck. IF everything stuck reboot back into TWRP to flash whatever rom is available MAKE SURE TO BACK UP EVERY FILE BEFORE YOU FLASH ANY NON-STOCK ROMS. If not successful rinse wash and repeat until it does!
http://download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
7. That’s it you should have root and a custom rom and recovery if you followed these instructions for flashing via ODIN 3.07 and Chainfires AutoRoot files. If you still have an issue repeat until root/recovery/Rom sticks. If you have to update the Binary for the SU just go to the Google Play Store and install the app and then try it again till it works. GOOD LUCK it worked for me this way!
**IMPORTANT**
BACK UP BACK UP BACK UP BACK UP after every flash that is possible to back up. If you can, back up the NON-SU stock ROM BEFORE installing SU, after installing the recovery and/or back up.
***IF I HELPED YOU OUT THANK ME***
DISCLAIMER - all research was observed via comments on the thread according to issues people have been having during ROOTING the device I simply have compiled the data and made a check list!
Need a link to the files you mentioned.
Thanks. Very helpful.
I have a P900. Is there a way to unroot and bring a unit back to stock? My main concern is if Samsung sends out a software/firmware update, and a device is already rooted, can the update be applied?
sstea said:
Thanks. Very helpful.
I have a P900. Is there a way to unroot and bring a unit back to stock? My main concern is if Samsung sends out a software/firmware update, and a device is already rooted, can the update be applied?
Click to expand...
Click to collapse
Read THIS
But still one quiestion, why the heck you root your device if you are going to update it via Samsung's official ways. Ah and one more question.. why the heck would you want to update your device if it's rooted?
A new update from Samsung can patch all known security holes and make your device unrootable, and since you are rooted now, one would think that you don't want to loose it. Or where do I know if you rooted because it sounded nice and cool, without knowing what you did and most importantly WHY you did.
Spere said:
Read THIS
But still one quiestion, why the heck you root your device if you are going to update it via Samsung's official ways. Ah and one more question.. why the heck would you want to update your device if it's rooted?
A new update from Samsung can patch all known security holes and make your device unrootable, and since you are rooted now, one would think that you don't want to loose it. Or where do I know if you rooted because it sounded nice and cool, without knowing what you did and most importantly WHY you did.
Click to expand...
Click to collapse
Thanks. I appreciate the reply. I have rooted many devices before. I have to admit that it was more of following posted instructions and not fully understanding the details. What gives me pause is how extremely limited the support is for this tablet. I want to root my note if I can make it more responsive, get rid of bloatware, enable more apps for multi-window, titanium backup, etc. I want to make sure that if I root that I don't get stuck with on an old release. So will previously rooted Notes be able to get the necessary files to easily update and maintain root, or does rooting now mean that a tablet may be stuck at the current release? Thanks
sstea said:
Thanks. I appreciate the reply. I have rooted many devices before. I have to admit that it was more of following posted instructions and not fully understanding the details. What gives me pause is how extremely limited the support is for this tablet. I want to root my note if I can make it more responsive, get rid of bloatware, enable more apps for multi-window, titanium backup, etc. I want to make sure that if I root that I don't get stuck with on an old release. So will previously rooted Notes be able to get the necessary files to easily update and maintain root, or does rooting now mean that a tablet may be stuck at the current release? Thanks
Click to expand...
Click to collapse
You can always flash stock firmware via odin
I was just wondering if everyone was having a much easier time with achieving root now? Kies caused me to "Hang" a lot during the Root and custom rom to stick w root... as of right now i can not get the only ONE custom ROM that looks promising, i have found by GWatts (correct me if i am wrong and i apologize if i have typed the wrong screen name handle) i believe his handle is... at this point im not sure what i am doing wrong as of yet but im sure i am missing a step or i just need to start back at unroot back to stock firmware and try and try again lol. not saying anything is wrong with his work at all by any means because people other than me with the same device have gotten it to stick and im just wishing i could as well because its sweet looking ROM! NOT TO MENTION THE ONLY ONE THAT IS OUT (that is which i know about. i haven't been on in a few months idk), SO KUDOS TO WATTS i just haven't been successful at installing his custom rom just yet... Im hoping that its just going to need to be erased again and then reformatted after a factory reset and what not, i pray it sticks because his incorporation of the aroma installer was a nice touch and his ROM really looks good... Now if i can just get it not to stick at samsung boot logo and freeze id be good lol!
sanvara said:
Need a link to the files you mentioned.
Click to expand...
Click to collapse
ok
I followed your instructions but while flashing the cf-auto-root file my screen got all distorted (speckled grains of color), and nothing else happened for about 15 minutes, until I just unplugged it and shut it off.
Now when I power it on it gives me the error "Firmware upgrade uncountered an issue. Please select recovery mode in Kies & try again."
I wonder what I did wrong.
pnuker said:
I followed your instructions but while flashing the cf-auto-root file my screen got all distorted (speckled grains of color), and nothing else happened for about 15 minutes, until I just unplugged it and shut it off.
Now when I power it on it gives me the error "Firmware upgrade uncountered an issue. Please select recovery mode in Kies & try again."
I wonder what I did wrong.
Click to expand...
Click to collapse
**Edit**
I went back and reflashed the twrp file and it got me out of the error screen. I installed supersu, and then re-flashed the cf-auto-root file, and it worked like a charm. I'm not sure if it was the installation of supersu, or just repeating the process that fixed it, but I'm happy either way...
Thank you! I succesfully rooted my SM-P900 after all mentioned problems ( hanging in the cache.img and after a while a disturbed screen etc.) with your guide. I am a very happy rooter now.
Thanks,
Thanks to the poster. I tried rooting with the instructions from a few other sites and thought I bricked it,
Followed your instructions, and presto.. Rooted! :good:
Rooted!
Thanks for your post. This is my first time ever rooting a device. Your method worked perfectly!
your welcome!
frankiecxyz said:
Thanks for your post. This is my first time ever rooting a device. Your method worked perfectly!
Click to expand...
Click to collapse
your very welcome! it took me a bit to get it down but i eventually figured it out and at the time information on rooting the device was hard to find with this specific model. then i discovered what the issues where and felt the need to post it! im glad i could help!:laugh:
Flash SU with TWRP not ODIN
Here's my story...
Received my new UK spec SM-P900 Note Pro 12.2, ran through the initial setup, performed two OTA upgrades to KOT49H.P900XXUANI1, then attempted to flash SU using Odin 3.07 using the various instructions on this forum. Result: failed cache flash and soft brick!
Used Keis 3 to recover the tablet which took two hours! After more reading I discovered the quick boot recovery flash method, so re-attempted on a different PC, with exactly the same result. Re-flashed the boot, tried again, fail, again, fail, etc, etc. Various permutations of PCs, Odin versions and USB ports were tried.
Concluded that the Odin method was NEVER going to work, so had a rethink. Used Odin to flash TWRP v2.8. Downloaded the latest SU-BETA v2.7 flash for TWRP (not Odin), copied it to the root of the tablet SD and then flashed it with TWRP. Worked first time with no messing about!!!
Booted, ran SU and upgraded to Premium, disabled KNOX from within SU. Tablet locked up. Booted, re-ran SU, disabled KNOX again, this time successfully. Ran Titanium, filtered with KNOX and froze all occurrences, then de-installed KNOX completely. :good:
Lesson learnt... DO NOT use Odin to flash SU on a P900 !
soft bricked
Hello!
First of all let me say that I'm a complete newbie, this is my first android device. I tried to root my SM-P900 (P900XXUANI1) using an online guide (image with URL attached, as I am not allowed to paste URLs)
Unfortunately at Step 10 (flashing with Odin) the operation failed and now I ended up with a soft bricked device (I assume this is the correct definition). It will only show the message asking me to connect it to KIES to recover it.
I know i can try to use KIES 3 and restore it, but before that i would like to ask if there is any alternative which will allow me to unbrick the device without losing all my data... (yeah i know...).
If i follow this guide will this help? I'm not sure if I can even put the device in download mode again as it shows the error message about connecting it to KIES...
At this point I don't care about rooting, I just want to unbrick the device.... I understand the guide up to (and including) step 3. But for the rest of the steps I'm lost Could anyone please explain them in a bit more detail? I don't want to install any custom firmware, just to unbrick it...
Any help would be very appreciated!
Thank you
Yemble said:
Here's my story...
Received my new UK spec SM-P900 Note Pro 12.2, ran through the initial setup, performed two OTA upgrades to KOT49H.P900XXUANI1, then attempted to flash SU using Odin 3.07 using the various instructions on this forum. Result: failed cache flash and soft brick!
Used Keis 3 to recover the tablet which took two hours! After more reading I discovered the quick boot recovery flash method, so re-attempted on a different PC, with exactly the same result. Re-flashed the boot, tried again, fail, again, fail, etc, etc. Various permutations of PCs, Odin versions and USB ports were tried.
Concluded that the Odin method was NEVER going to work, so had a rethink. Used Odin to flash TWRP v2.8. Downloaded the latest SU-BETA v2.7 flash for TWRP (not Odin), copied it to the root of the tablet SD and then flashed it with TWRP. Worked first time with no messing about!!!
Booted, ran SU and upgraded to Premium, disabled KNOX from within SU. Tablet locked up. Booted, re-ran SU, disabled KNOX again, this time successfully. Ran Titanium, filtered with KNOX and froze all occurrences, then de-installed KNOX completely. :good:
Lesson learnt... DO NOT use Odin to flash SU on a P900 !
Click to expand...
Click to collapse
Have you got a link to the odin rwrp 2.7 you used and the su 2.7 flash for twrp please?
VenomousViper said:
**NOTE** For the SM-P900! However steps should be the same for SM-P905 EXCLUDING THE FILE TYPES (THEY ARE DIFFERENT DO NOT ATTEMPT TO USE THE FILES FOR THE SM-P900 OR BYE BYE TO YOUR NOTE 12.2 Pro because now you have a problem that may or may not be repairable/reversible). You just have to make sure you have the coordinating files for the process!
If anyone else has issues try this and these steps to complete the Root/Custom ROM/TWRP Recovery installations successfully for a "First time go":
1. Remove Kies and Kies3 files, related files, folders, and everything that has anything to do with the primary installation of either the two programs on your PC and your devices. When/if prompted, select the checkable box and elect not save any type of files... if you want to keep them save them OFF your main PC on a flash or removable storage device.
2. REMOVE ALL SAMSUNG DRIVERS AND REPLACE WITH ONLY OFFICIAL SAMSUNG DRIVES!!! THIS IS A BIG MUST!.......
Click to expand...
Click to collapse
When i trying root, my SGN freeze in "cache". Odin show error and tablet goes to Emergency Firmware Recovery. Аnd it does not matter what program I use and how I do it.
Mine Reboots Constantly
I rooted my SM-900 about two weeks ago.
It worked great for a week until the device started rebooting by itself.
The first time a couple times a day, now it does it whenever as often as twice in 5 minutes.
Is there a way to see which app is causing this or does anyone know why this might be happening?
Though I rooted I haven't been poking around. I figured it'd be like using Linux but now I see it's not quite like that.
Thanks in advance.
sunnykhs said:
I rooted my SM-900 about two weeks ago.
It worked great for a week until the device started rebooting by itself.
The first time a couple times a day, now it does it whenever as often as twice in 5 minutes.
Is there a way to see which app is causing this or does anyone know why this might be happening?
Though I rooted I haven't been poking around. I figured it'd be like using Linux but now I see it's not quite like that.
Thanks in advance.
Click to expand...
Click to collapse
Have you cleared dalvic cache and cache in TWRP recovery? Be forewarned the process takes a while for cache wipe.
Sent from my SM-P900 using Tapatalk
Hey Guys,
When I try to boot in Odin mode the tablet just boots with RECOVERY BOOTING....then hangs...
Samsung
Galaxy Note Pro
Unlocked Pic
Custom
Android
I was rooted then i wanted to flash stock and it went downhill from there. It flashed last night but wifi wasnt working. I really dont want to take it to verizon. I have revived but the three button salute doesnt let me get into download mode. Please help Its insuranced but will they cover it since it has Custom on it?
Edit: Screen is not faint and the device is working.
So reading some other threads where people encountered this problem. Two main solutions
1. bad recovery flash, it needs to be flashed again.
2. Can you still plug in the tablet and charge it? If you can do that the other recommended solution was burning the battery out until dead, basically forcing a full on restart of everything, then plugging in the device letting it recharge then trying to boot into download mode again. They say pull the battery, but since you can't do that you need to burn it down to 0. As long as you can charge your tablet you aren't lost. If you can get into download mode after trying that flash stock firmware from odin. Then start the process from step 1, clean start.
Either way, I wouldn't panic yet. Well don't panic at all. Panicking just makes mistakes and you aren't anywhere near the hopeless stage where you have to bring it back to verizon yet. I'm sure other people here will have other ideas as well and some people may have had the same problem. Just breathe. Burning the battery will give you some relaxing time lol. Pretty confident it can be fixed.
biggiesmalls657 said:
Hey Guys,
When I try to boot in Odin mode the tablet just boots with RECOVERY BOOTING....then hangs...
Samsung
Galaxy Note Pro
Unlocked Pic
Custom
Android
I was rooted then i wanted to flash stock and it went downhill from there. It flashed last night but wifi wasnt working. I really dont want to take it to verizon. I have revived but the three button salute doesnt let me get into download mode. Please help Its insuranced but will they cover it since it has Custom on it?
Click to expand...
Click to collapse
Gatsrom said:
So reading some other threads where people encountered this problem. Two main solutions
1. bad recovery flash, it needs to be flashed again.
2. Can you still plug in the tablet and charge it? If you can do that the other recommended solution was burning the battery out until dead, basically forcing a full on restart of everything, then plugging in the device letting it recharge then trying to boot into download mode again. They say pull the battery, but since you can't do that you need to burn it down to 0. As long as you can charge your tablet you aren't lost. If you can get into download mode after trying that flash stock firmware from odin. Then start the process from step 1, clean start.
Either way, I wouldn't panic yet. Well don't panic at all. Panicking just makes mistakes and you aren't anywhere near the hopeless stage where you have to bring it back to verizon yet. I'm sure other people here will have other ideas as well and some people may have had the same problem. Just breathe. Burning the battery will give you some relaxing time lol. Pretty confident it can be fixed.
Click to expand...
Click to collapse
Thats why ^^^^^^^ i love this great community because people help each other and positive feedback rather than negativity. I have modified dozens of device over the years and this device is my first big fail as of now but I will let it die. What gets me is Verizon and ATT know that locking their device makes people mad and yet they continue to do whats best for business. I someday would love to reach dev status. How would I flash the recovery without download mode?
Debrick IMG
I also have the Stock Rom decompiled and am trying to make a Debrick IMG to get the tablet to boot from SDext to get to download mode then im out of the woods but i need to find out what imgs to use. I have Win32 Disk Imager ready and this is how I saved my S3 verizon last year. I don't have download mode yet or ADB (i think) so im running out of ideas. There are a lot of awesomesauce devs out there (including you) that do amazing things for our devices. Mattlgroff saved my RAZR Maxx and Trident made the ally a great phone for its time. It might not seem sometimes especially how people act by bickering but we really do appreciate the hard work of development across the board of devices. End Story
just boots with RECOVERY BOOTING....then hangs...
--- wanted to flash stock and it went downhill from there. It flashed last night but wifi wasnt working.
Click to expand...
Click to collapse
the first one sounds so, that the recovery Image was/is the wrong one. This matched also the 2nd one : Stock, but Wifi is not working. If you flash e.g. on P905 the H3 Imagage and after that the C3 kernel, Wifi doesn't work in this status also anymore. I'll believe, you've flashed a wrong image.
To change anything / or the repair the Tab, you must have the possibility to have an access to the Tablet.
What does you've try?
Fastboot / Recovery-Menu? [This one failed -if I've understood you right]
Download-Menu?
Up to which point does your Tab start's up ? Doers you've any access?
biggiesmalls657 said:
I also have the Stock Rom decompiled and am trying to make a Debrick IMG to get the tablet to boot from SDext to get to download mode then im out of the woods but i need to find out what imgs to use. I have Win32 Disk Imager ready and this is how I saved my S3 verizon last year. I don't have download mode yet or ADB (i think) so im running out of ideas. There are a lot of awesomesauce devs out there (including you) that do amazing things for our devices. Mattlgroff saved my RAZR Maxx and Trident made the ally a great phone for its time. It might not seem sometimes especially how people act by bickering but we really do appreciate the hard work of development across the board of devices. End Story
Click to expand...
Click to collapse
Hmmm we definitely need someone with a 905 to post the partition info if you're going to try to build a debrick.img. Have you used search to see if anyone maybe already has? I only have the 900 and I was pretty sure they were different. Just glancing at this program I'm guessing you'd need boot.img since it's going to basically provide a bootloader as the phone hops from internal to external looking for a way to boot. I've never used it though so I don't want to tell you the wrong thing :x
Gatsrom said:
Hmmm we definitely need someone with a 905 to post the partition info if you're going to try to build a debrick.img. Have you used search to see if anyone maybe already has? I only have the 900 and I was pretty sure they were different. Just glancing at this program I'm guessing you'd need boot.img since it's going to basically provide a bootloader as the phone hops from internal to external looking for a way to boot. I've never used it though so I don't want to tell you the wrong thing :x
Click to expand...
Click to collapse
Now the software wont flash and there seems to be a hardware issue (my screen flickers) and it didnt last night.
Update: This device is fixed except for wifi wont initialize but this can help other users. Please lock this thread and hope it helps other people in unbricking! I love XDA and its community!
Update: This device is fixed except for wifi wont initialize but this can help other users
Click to expand...
Click to collapse
What does you'Ve done? Maybe other users have teh same issue and there are happy, if they can found a way to reanimate the Tab?
Mad07 said:
What does you'Ve done? Maybe other users have teh same issue and there are happy, if they can found a way to reanimate the Tab?
Click to expand...
Click to collapse
The Tablet has to be completely dead and then you can charge it to odin cause of the recovery booting ...... but draining the battery clears RAM and then i can get into download mode. Its still better than a 750 dollar paperweight just need to fix wifi. Its almost set up this way and takes longer to fix the device if you are kind of in a hurry. I was rooted but unfortunately have no safestrap so i could not back up my image It was in a bricked state and was corrected by troubleshooting android related problems and flashing in Odin. The only question besides the wifi problem is even though i flashed Stock firmware, my device shows up as Custom????? Any Ideas its not tripped i know that much.
biggiesmalls657 said:
The Tablet has to be completely dead and then you can charge it to odin cause of the recovery booting ...... but draining the battery clears RAM and then i can get into download mode. Its still better than a 750 dollar paperweight just need to fix wifi. Its almost set up this way and takes longer to fix the device if you are kind of in a hurry. I was rooted but unfortunately have no safestrap so i could not back up my image It was in a bricked state and was corrected by troubleshooting android related problems and flashing in Odin. The only question besides the wifi problem is even though i flashed Stock firmware, my device shows up as Custom????? Any Ideas its not tripped i know that much.
Click to expand...
Click to collapse
So the battery trick did reset it? Score! lol. I've actually had two friends have to do something similar with other android devices. So you flashed stock onto it (thank god) and now the only problem remaining is no wifi? I know we had a thread about no wifi for our specific device in the forums. Search for that. It seemed like people were able to fix it in that thread.
Gatsrom said:
So the battery trick did reset it? Score! lol. I've actually had two friends have to do something similar with other android devices. So you flashed stock onto it (thank god) and now the only problem remaining is no wifi? I know we had a thread about no wifi for our specific device in the forums. Search for that. It seemed like people were able to fix it in that thread.
Click to expand...
Click to collapse
Wifi and bluetooth and system status is custom and updating bricks and puts me back to letting it die.
Wifi and bluetooth and system status is custom and updating bricks
Click to expand...
Click to collapse
Where you can see, that Wifi and BT is custom ?
System status is also Custom on my tab ( TWRP was flashed )
At which point the update bricks? Near at the end > hiddenfile ext4 wrong ?
Which this error ( I've select the GBT - file, but the Tab was buyed in Austria > so I need the ATO ) I've triggered KNOX After download the correct FW-File, odin could flash successfully.
If you change temporary the Kernel for root, Wifi is no working , too...
updating bricks
Click to expand...
Click to collapse
If odin failed during flashing, press one time Reset in odin, dis-/ connect the USB cable from the TAB and you can continue with odin. During next flash, you received a lot of red text lines, that the progressbar indicator is not correct, but this one you can ignore. Urgent is, that odin said : PASSED at the end.
In you case, I would make direct after successfull flash -> boot into the EM Menu and initiate a factory reset
Mad07 said:
Where you can see, that Wifi and BT is custom ?
System status is also Custom on my tab ( TWRP was flashed )
At which point the update bricks? Near at the end > hiddenfile ext4 wrong ?
Which this error ( I've select the GBT - file, but the Tab was buyed in Austria > so I need the ATO ) I've triggered KNOX After download the correct FW-File, odin could flash successfully.
If you change temporary the Kernel for root, Wifi is no working , too...
If odin failed during flashing, press one time Reset in odin, dis-/ connect the USB cable from the TAB and you can continue with odin. During next flash, you received a lot of red text lines, that the progressbar indicator is not correct, but this one you can ignore. Urgent is, that odin said : PASSED at the end.
In you case, I would make direct after successfull flash -> boot into the EM Menu and initiate a factory reset
Click to expand...
Click to collapse
I had NB1 installed and it was working then i used Repair Assistant and it has recovery booting and the boot logo with Custom android. They wont cover it for insurance, i might as well just damage and pay the deductible. I have tried everything and it results in a brick.
From where is this image ND repair assistant ? The bootlogo is changed via root very easy. For that nobody needs a total ROM flash. It's only 1 zipfile.... Hopefully the repair assistant does not has make a recreate partitions....
let go out from the best case Which stock rom does you try to flash? The latest one?
Model: SM-P905V
Model name: GALAXY NotePRO 12.2 LTE
Country: USA (Verizon)
Version: Android 4.4.2
Changelist: 1810991
Build date: Mon, 10 Nov 2014 07:03:29 +0000
Product Code: VZW
PDA: P905VVRUANK1
CSC: P905VVZWANK1
MODEM: P905VVRUANK1
I didn't still know at which area Odin failed to flash
Mad07 said:
From where is this image ND repair assistant ? The bootlogo is changed via root very easy. For that nobody needs a total ROM flash. It's only 1 zipfile.... Hopefully the repair assistant does not has make a recreate partitions....
let go out from the best case Which stock rom does you try to flash? The latest one?
Model: SM-P905V
Model name: GALAXY NotePRO 12.2 LTE
Country: USA (Verizon)
Version: Android 4.4.2
Changelist: 1810991
Build date: Mon, 10 Nov 2014 07:03:29 +0000
Product Code: VZW
PDA: P905VVRUANK1
CSC: P905VVZWANK1
MODEM: P905VVRUANK1
I didn't still know at which area Odin failed to flash
Click to expand...
Click to collapse
Yes the latest build is what I flashed. I wonder if the kernel changed but right now NB1 makes it usable with no WiFi or bluetooth.
Which Rom does you mean exactly with NB1 ?
the only one, which I've found - which contains NB1 at the end is:
Model: SM-P905V
Model name: GALAXY NotePRO 12.2 LTE
Country: USA (Verizon)
Version: Android 4.4.2
Changelist: 617169
Build date: Thu, 06 Feb 2014 12:19:18 +0000
Product Code: VZW
PDA: P905VVRUANB1
CSC: P905VVZWANB1
MODEM: P905VVRUANB1
Click to expand...
Click to collapse
Why you don't try to flash the K1 Rom? [See above].
If I think about my Galaxy S3 LTE : I have the old Bootloader ( without Knox ) on the device -> if I flash the new System / Kernel without the new Bootloader, I'll have also a problem with a nonworking Wifi ...
Gatsrom said:
So the battery trick did reset it? Score! lol. I've actually had two friends have to do something similar with other android devices. So you flashed stock onto it (thank god) and now the only problem remaining is no wifi? I know we had a thread about no wifi for our specific device in the forums. Search for that. It seemed like people were able to fix it in that thread.
Click to expand...
Click to collapse
The software is flashed and notice the system sleeps and screen wont turn back on until i three finger salute. Boot Logo has no unlocked symbol but About phone displays Custom. Also Wifi/Bluetooth issue which I could not find. If i can fix the wifi and bluetooth i wont send into verizon. They should cover it, Odin mode displays 0x0.
Edit: Odin mode still displays SYSTEM STATUS: Custom even though I flashed the NB1 build. Wifi/Bluetooth still do not work. I have wiped data/ cache and rebooted the device. Towelroot didnt work previously but I will try with this build.
ok, first of all, go into the settings, developer and enable USB system debugging. Shut down the Tab, Hold The home key, volume down and Power. After that, the tab starts into the download mode, press volume + to continue. The screen changed. Connect the Tab with you running Odin ( check the task manager, that nothing from Kids is still running in the background. Select as PDA the K1 Firmware which was in the zip. Ending is tar.md5.
Check is Only Autogreboot and the F fuse(?) >>default settings are selected. Press Start and wait... In Odin you can following which Parton is now flashed. Hopefully Odin stopped with Passed and the Tab rebooted. If you've the wrong region rom, Odin failed at the hidden file ext4.
Mad07 said:
ok, first of all, go into the settings, developer and enable USB system debugging. Shut down the Tab, Hold The home key, volume down and Power. After that, the tab starts into the download mode, press volume + to continue. The screen changed. Connect the Tab with you running Odin ( check the task manager, that nothing from Kids is still running in the background. Select as PDA the K1 Firmware which was in the zip. Ending is tar.md5.
Check is Only Autogreboot and the F fuse(?) >>default settings are selected. Press Start and wait... In Odin you can following which Parton is now flashed. Hopefully Odin stopped with Passed and the Tab rebooted. If you've the wrong region rom, Odin failed at the hidden file ext4.
Click to expand...
Click to collapse
I have flashed it that way several times. The software flashing isn't the problem, its WiFi and Bluetooth jam and wiping data cache do not fix it. I have re downloaded the software and its a no go.
biggiesmalls657 said:
I have flashed it that way several times. The software flashing isn't the problem, its WiFi and Bluetooth jam and wiping data cache do not fix it. I have re downloaded the software and its a no go.
Click to expand...
Click to collapse
If Knox still triggered? Ill believe so. K1 is now the current FW?
Try after install TWRP , wipe normal and go into the adv. wipe settings to format / System and / Data / Cache etc..
Reflash K1 again.
How does it looks like Jam of Wifi / BT ? does you received a FC? only Interruption ?
I recently got my Samsung Galaxy S6 and decided to root and install TWRP for a custom rom. I was able to root the phone and then installed their android app. TWRP Manager (ROOT).
After that I went to the app and one of the sidebars labeled install TRWP on the app then to the codename zeroflte for the Samsung Galaxy S6. It told me to restart my phone and I did but after that I was not able to use my phone again. Whenever I would turn on my phone it would show the normal Samsung s6 screen with a unlock picture and the words custom underneath. After that it would display a turquoise color screen with a words
Start Up Failed. Your device didn’t start up successfully. Use the Verizon Software Repair Assistant on a computer to repair your device.
I tried to google and see if anyone had a similar problem but nothing popped up. I don’t know where to find a copy for the Verizon Software Repair Assistant for the Galaxy S6.
I also tried and factory reset the phone or anything but the only combinations of buttons that would work on my phone were the down volume + power button. It gave me a list of options including factory reset but every option that I chose would lead me back to the same screen. The turquoise screen saying Start Up Failed.
Any help would be great. I don’t know what to do now. Tomorrow I am going to down to a local repair store and see what they can do. But if you know of anything that would be great. Thank you for your time and have a nice day.
inolil said:
I recently got my Samsung Galaxy S6 and decided to root and install TWRP for a custom rom. I was able to root the phone and then installed their android app. TWRP Manager (ROOT).
After that I went to the app and one of the sidebars labeled install TRWP on the app then to the codename zeroflte for the Samsung Galaxy S6. It told me to restart my phone and I did but after that I was not able to use my phone again. Whenever I would turn on my phone it would show the normal Samsung s6 screen with a unlock picture and the words custom underneath. After that it would display a turquoise color screen with a words
Start Up Failed. Your device didn’t start up successfully. Use the Verizon Software Repair Assistant on a computer to repair your device.
I tried to google and see if anyone had a similar problem but nothing popped up. I don’t know where to find a copy for the Verizon Software Repair Assistant for the Galaxy S6.
I also tried and factory reset the phone or anything but the only combinations of buttons that would work on my phone were the down volume + power button. It gave me a list of options including factory reset but every option that I chose would lead me back to the same screen. The turquoise screen saying Start Up Failed.
Any help would be great. I don’t know what to do now. Tomorrow I am going to down to a local repair store and see what they can do. But if you know of anything that would be great. Thank you for your time and have a nice day.
Click to expand...
Click to collapse
Have you tried to Odin back to stock?
http://forum.xda-developers.com/verizon-galaxy-s6/development/5-15-stock-odin-tar-t3109676
Ya, you'll need to odin back to stock like he said. And TWRP isn't available for our phone since we don't have an unlocked bootloader. Do not try and install TWRP again. You'll want to use Flashfire if you need to flash anything.
brholt6 said:
Ya, you'll need to odin back to stock like he said. And TWRP isn't available for our phone since we don't have an unlocked bootloader. Do not try and install TWRP again. You'll want to use Flashfire if you need to flash anything.
Click to expand...
Click to collapse
Awesome thank you
I need help!
I did the exact same thing with my Galaxy s6, i tried to do the same thing with my newly acquired root, I am very new but very interested in rooting and customizing my phone, when I plug my phone into a computer it only pops up with the start up failed screen, I installed the odin thing but i have no clue where to go from here and any assistance would be greatly appreciated. thank you
Bubblegum Mage said:
I did the exact same thing with my Galaxy s6, i tried to do the same thing with my newly acquired root, I am very new but very interested in rooting and customizing my phone, when I plug my phone into a computer it only pops up with the start up failed screen, I installed the odin thing but i have no clue where to go from here and any assistance would be greatly appreciated. thank you
Click to expand...
Click to collapse
Keep in mind XDA is a community for developers by developers. People are also willing to help, but you got to put forth your own effort. You will get ignored if you think people on this site are going to act as free tech support. Your question is posted just a few posts down from a link to the process on using odin to return to stock. You need to just follow those instructions. If you don't understand a step then Google it. I'm saying this because I noticed you joined XDA to ask this question. Or at least it's your first post. You will make a lot of enemies here if you don't take the time to read and research things before posting.
HELP
I have the same problem (Start up failed) but ODIN is not working for me... I am using the stock firmware for the GS6 edge and it says failed... what should I do?
Bee Funny said:
I have the same problem (Start up failed) but ODIN is not working for me... I am using the stock firmware for the GS6 edge and it says failed... what should I do?
Click to expand...
Click to collapse
If you have an edge you should use their forum. It's different than the GS6.
Just had to Odin my Verizon S6 (sm-g920v) to get it back to factory defaults.
I've been rooted for months with no issues and have known my bootloader was locked with no nice way around it but then i read some stupid guides saying to go get twrp manager to load custom roms on the Galaxy s6 phones and they even included the sm-g920v model number. I went to the app store, downloaded twrp manager, followed the first few steps, rebooted and that was that. Could not boot up anymore without Start Up Failed. A few checks and warning would have been greatly appreciated from the app developers but oh well.
Well that was fun. Now to redo everything on my phone.
Oooah said:
Just had to Odin my Verizon S6 (sm-g920v) to get it back to factory defaults.
I've been rooted for months with no issues and have known my bootloader was locked with no nice way around it but then i read some stupid guides saying to go get twrp manager to load custom roms on the Galaxy s6 phones and they even included the sm-g920v model number. I went to the app store, downloaded twrp manager, followed the first few steps, rebooted and that was that. Could not boot up anymore without Start Up Failed. A few checks and warning would have been greatly appreciated from the app developers but oh well.
Well that was fun. Now to redo everything on my phone.
Click to expand...
Click to collapse
Same exact crap just happened to me. I was running CleanRom Lite....thought I could use TWRP...some times I do stupid things...should have just stuck with FlashFire.
I've tried odin back to stock, it keeps failing. it says nand write fail and it stops. I've tried many different times. I've run Odin 3.10.6 and 3.10.7 I have the latest drivers, it recognizes the device but it will not load anything via odin. I've tried on two different computers as well.
...
Gizmoe said:
...
Click to expand...
Click to collapse
I have a Galaxy s6 edge btw. Not much info on the edge, in desperation, I'm combing thru galaxy s6 forums seeking answers. I have been rooted for awhile. I wanted to turn off the nagging volume warning so I downloaded a zip file to flash but only to find that my twrp recovery was no longer there. So I try to download twrp and flash. Now I'm in a boot loop with the turquoise screen telling me to use a verzion tool to reset the device. Klies says my phone isn't compatible as well as smart switch. Odin fails every time after NAND WRITE. I'm about to microwave this crap and get new phone.
keith7120 said:
I have a Galaxy s6 edge btw. Not much info on the edge, in desperation, I'm combing thru galaxy s6 forums seeking answers. I have been rooted for awhile. I wanted to turn off the nagging volume warning so I downloaded a zip file to flash but only to find that my twrp recovery was no longer there. So I try to download twrp and flash. Now I'm in a boot loop with the turquoise screen telling me to use a verzion tool to reset the device. Klies says my phone isn't compatible as well as smart switch. Odin fails every time after NAND WRITE. I'm about to microwave this crap and get new phone.
Click to expand...
Click to collapse
Did you ever get your phone up and running? I ran into similar issue with odin. After looking around on web I found a forum that mentioned using an older version of odin.
---------- Post added at 06:50 PM ---------- Previous post was at 06:44 PM ----------
Fe Mike said:
Did you ever get your phone up and running? I ran into similar issue with odin. After looking around on web I found a forum that mentioned using an older version of odin.
Click to expand...
Click to collapse
Sorry I saw you tried other odin versions 3. 10.x, I meant going lower. 3.09 is recommended for jb/kk but that worked for me.
Hi guys,
Not started a thread on XDA for years but I really am stumped.
I have claimed my girlfriends s6 (SM-G920F) after she upgraded and intended to root it and maybe try a few Oreo ROMs etc. After investigation I saw that (I think this is right) I don't need to OEM unlock this version of the device and rooting via Odin is the best way to do it. BTW if I do need to OEM unlock then that might be the solution to my issue, so if some one could clarify that'd be great.
So a week ago I downloaded Odin and also my old favourite CF-AutoRoot after putting in the device details. The package was generated, I unzipped and put it in a folder in my desktop
After putting the device in download mode I run Odin as administrator and plug it in. The device is recognised and I get the blue box to show this.
I then click the AP box and select the image file and click start, everything runs as expected to this point and I get PASS displayed in the info bar. On the phone the progress bar looks like it has not completed and I can see a small portion still to run. On the first try I left phone like this waiting for it reboot for over an hour. I was expecting 5he device to reboot and get the android with the red exclamation point. At this point I restarted manually and saw during the boot process an error message saying Recovery not SE Enforcing in red.
I have read a few posts saying this can be caused by the wrong image being used, so I downloaded the Auto root package again and made sure that it was all correct, but the same thing occurred.
I have been looking and reading for the last week to find a solution, but I'm still in the same position. Can anyone help or point me in the right direction?
If you need any more info let me know.
Thanks in advance
Jon
im in exacltly the same boat pal. was running nanorom on my rooted s6, but had no vr capability and just got some galaxy gear goggles. tried to reflash arter97 kernal and lost my whole setup. ive been in and out of hard brick for last 24hrs and am back now to where you are, i can access download and recoveries via three button combo, but any packages i flash with odin just fail out right.
ive been here before though and usually get out once i find the right stock rom and csc's for my version. iof i find anything ill come back and share it with you pal.
Cheers mate, it's really frustrating. I'll keep looking too and post back if I have any success.
Hi guys, this thread hasn't been responded to so I thought I'd just replied to it to give it a little bump up. I'd much appreciate it if anybody could help me out here.
Thanks again,
Jon
copernicus666 said:
Hi guys, this thread hasn't been responded to so I thought I'd just replied to it to give it a little bump up. I'd much appreciate it if anybody could help me out here.
Thanks again,
Jon
Click to expand...
Click to collapse
Just try bro to reflash full stock rom again by odin and after flash it , reflash cf-autoroot again
also , can you provide more information about your android version and your csc stock rom ?
what a f**k about!!!!
Right then Jon,
sorry for my delay but not the greatest at reponding to things at the best of times, but with my own s6 in a right old state, and a 7y.o and 4 month old in the house, my pc time is limited.
anyways, im guessing you're a bit like me, and you've had your fair share of flashing roms and roots since the days of old! (Galaxy thru and thru for me s 1,3,4,6, plus tabs and watches).
this s6 gt-920f is a completely different kettle of fish mate. where you're at at the minute, if your still stuck in bootloop with no recovery, your gonna want to find twrp recovery, as you know mate, google will be your guide. you flash this just like a rom or the old cwm, download a zip, bang it in ap/pda in odin and let it flash. KEY NOTE IS MAKE SURE ODIN HAS ~"AUTO-REBOOT"~ UNTICKED, UNCHECKED, NO MARK IN THE BOX. THIS IS KEY TO THE RESTORATION PROCESS GOING FORWARD. Once odin shows that the file has flashed and passed, get ready to perform a three button power reset, Home button, Vol DOWN and Power for 8 seconds. when your pc makes the badong sound and the screen goes off, IMMEDIATELY SWITCH TO Vol UP, Home and Power, thus straight into recovery mode, AND WAIT.
You should see the blue and silver TWRP splash screen and then the recovery options. Firstly, wipe and format everything, dalvik, caches and perform a factory reset. twrp should ask you to type yes to confirm, do it, there's nothing there yet any ways. if you get any issues about cant mount data or some jazz, DONT PANIC, use twrp to reformat the partition to ext4, your pc should ping to show reconnection to the phone.
Now whilst still in twrp, nav to the reset options and reboot into download mode. if all has go well, the scren should have the regular greenish odin screen but without all the samsung odin mode in at the top. odin should show the phone as a connected device, you should be able to access your memory card from your pc to transfer rom zips etc and get the phone back up the way you are used to.
if on the other hand you want to get back to vanila stock style android, with the expense of a tonload of bloatware and crapps, you're gonna wanna take a goggle at stuff like "G920F Repair Firmware X.X UK YYY) , Where X.X is 5.1, 6.1, 7.1, depending on the original android version your brick was on, and YYY is your carrier or network operator, off the top of my head they are VOD, TMO, O2U, H3G.
AGAIN A KEY POINT IF YOUR GOING THIS ROUTE, THESE FILES ARE MADE FOR INDIVIDUAL MODELS OF S6 (THERES ABOUT 12 MODEL NUMBERS -YOURS IS AND ALWAYS WILL BE SM-G920F - SO DO NOT EVER STRAY FROM THAT NUMBER!!!! ) THAT MEANS YOU NEED TO BE FINDING FILES LIKE "G920XXU5EXUE 4 files repair firmwares", THESE ARE YOUR SAVIOUR. GET THE ONE THAT MATCHES YOUR PHONE AND CARRIER OR ONE THAT IS AS NEAR AS DAMMIT, AND AGAIN PLEASE MAKE SURE FOR THE LOVE OF YOUR PHONE THAT YOU ONLY GET FILES MARKED G920, ANYTHING ELSE WILL RESULT IN VERY SERIOUS ERRORS.
YOUR ALSO GOING TO NEED SOMETHING CALLED A PIT FILE, EASY TO FIND, LOOK FOR " S6 ZEROFLTE HIDDEN IMG FILE" IN GOOGLE.
USE OUR OLD BUDDY ODIN TO FLASH THE FOUR FILES YOU GOT FROM THE REPAIR FIRMWARE ZIP, WHICH ARE USUALLY LABEL AP, BL, CP AND CSC.. NOW TAP THE PIT TAB IN ODIN (IGNORE THE WARNING) AND NAVIGATE TO THE HIDDEN.IMG FILE YOU GOT AND BANG IT HERE. ON THE OPTIONS TAB YOU WANT TO TICK AUTO REBOOT, REPARTITION, and NAND ERASE ALL. i know, i know, you probably never use it out of some shear panic but right now its kosher.
start the flash and take a break. like a big break. the process is gonna wipe the phone in totalilty, rewrite every bit of code and software and reload like new after about forty minutes.
now, if it doesnt, there are a few things we can look at but am gonna leave it here and hope you can make some use of the ramblings of a lost man. my 6 is currently in an inverted touch bug where if i touch one side of the screen, the opposite side responds so its a proper nightmare, typing anything means that a becomes l, s becomes k etc. thisis down to me drunk flashing the wrong roms for and s6 edge, g925f, hence all my warnings earlier. anyways, i need a reefer and a scran after all this, God, allah, buddah i hope it helps someone.
shiko2007 said:
Just try bro to reflash full stock rom again by odin and after flash it , reflash cf-autoroot again
also , can you provide more information about your android version and your csc stock rom ?
Click to expand...
Click to collapse
Hi, thanks for replying.
I'm on the original stock, I've not flashed any thing just yet. To be honest, I'm not sure it'd work.
The android version is 7.0 and the build is NRD90M.G920FXXS5EQH6
Be glad if you have any advise.
Thanks
copernicus666 said:
Hi, thanks for replying.
I'm on the original stock, I've not flashed any thing just yet. To be honest, I'm not sure it'd work.
The android version is 7.0 and the build is NRD90M.G920FXXS5EQH6
Be glad if you have any advise.
Thanks
Click to expand...
Click to collapse
if your not root yet just download latest your carrier/country firmware
from sammobile
and flash it by odin
but you are probably trip knox so you must root
so the steps you should do :
1-download your carrier/country firmware from sammobile
2-flash it by odin
3-flash cf-auto root to pass bootloop
or
download twrp recovery of g920f and flash it by odin to replace stock recovery then after flash it ,wipe delvik cash then flash su binary
DagsyMc said:
Right then Jon,
sorry for my delay but not the greatest at reponding to things at the best of times, but with my own s6 in a right old state, and a 7y.o and 4 month old in the house, my pc time is limited.
anyways, im guessing you're a bit like me, and you've had your fair share of flashing roms and roots since the days of old! (Galaxy thru and thru for me s 1,3,4,6, plus tabs and watches).
this s6 gt-920f is a completely different kettle of fish mate. where you're at at the minute, if your still stuck in bootloop with no recovery, your gonna want to find twrp recovery, as you know mate, google will be your guide. you flash this just like a rom or the old cwm, download a zip, bang it in ap/pda in odin and let it flash. KEY NOTE IS MAKE SURE ODIN HAS ~"AUTO-REBOOT"~ UNTICKED, UNCHECKED, NO MARK IN THE BOX. THIS IS KEY TO THE RESTORATION PROCESS GOING FORWARD. Once odin shows that the file has flashed and passed, get ready to perform a three button power reset, Home button, Vol DOWN and Power for 8 seconds. when your pc makes the badong sound and the screen goes off, IMMEDIATELY SWITCH TO Vol UP, Home and Power, thus straight into recovery mode, AND WAIT.
You should see the blue and silver TWRP splash screen and then the recovery options. Firstly, wipe and format everything, dalvik, caches and perform a factory reset. twrp should ask you to type yes to confirm, do it, there's nothing there yet any ways. if you get any issues about cant mount data or some jazz, DONT PANIC, use twrp to reformat the partition to ext4, your pc should ping to show reconnection to the phone.
Now whilst still in twrp, nav to the reset options and reboot into download mode. if all has go well, the scren should have the regular greenish odin screen but without all the samsung odin mode in at the top. odin should show the phone as a connected device, you should be able to access your memory card from your pc to transfer rom zips etc and get the phone back up the way you are used to.
if on the other hand you want to get back to vanila stock style android, with the expense of a tonload of bloatware and crapps, you're gonna wanna take a goggle at stuff like "G920F Repair Firmware X.X UK YYY) , Where X.X is 5.1, 6.1, 7.1, depending on the original android version your brick was on, and YYY is your carrier or network operator, off the top of my head they are VOD, TMO, O2U, H3G.
AGAIN A KEY POINT IF YOUR GOING THIS ROUTE, THESE FILES ARE MADE FOR INDIVIDUAL MODELS OF S6 (THERES ABOUT 12 MODEL NUMBERS -YOURS IS AND ALWAYS WILL BE SM-G920F - SO DO NOT EVER STRAY FROM THAT NUMBER!!!! ) THAT MEANS YOU NEED TO BE FINDING FILES LIKE "G920XXU5EXUE 4 files repair firmwares", THESE ARE YOUR SAVIOUR. GET THE ONE THAT MATCHES YOUR PHONE AND CARRIER OR ONE THAT IS AS NEAR AS DAMMIT, AND AGAIN PLEASE MAKE SURE FOR THE LOVE OF YOUR PHONE THAT YOU ONLY GET FILES MARKED G920, ANYTHING ELSE WILL RESULT IN VERY SERIOUS ERRORS.
YOUR ALSO GOING TO NEED SOMETHING CALLED A PIT FILE, EASY TO FIND, LOOK FOR " S6 ZEROFLTE HIDDEN IMG FILE" IN GOOGLE.
USE OUR OLD BUDDY ODIN TO FLASH THE FOUR FILES YOU GOT FROM THE REPAIR FIRMWARE ZIP, WHICH ARE USUALLY LABEL AP, BL, CP AND CSC.. NOW TAP THE PIT TAB IN ODIN (IGNORE THE WARNING) AND NAVIGATE TO THE HIDDEN.IMG FILE YOU GOT AND BANG IT HERE. ON THE OPTIONS TAB YOU WANT TO TICK AUTO REBOOT, REPARTITION, and NAND ERASE ALL. i know, i know, you probably never use it out of some shear panic but right now its kosher.
start the flash and take a break. like a big break. the process is gonna wipe the phone in totalilty, rewrite every bit of code and software and reload like new after about forty minutes.
now, if it doesnt, there are a few things we can look at but am gonna leave it here and hope you can make some use of the ramblings of a lost man. my 6 is currently in an inverted touch bug where if i touch one side of the screen, the opposite side responds so its a proper nightmare, typing anything means that a becomes l, s becomes k etc. thisis down to me drunk flashing the wrong roms for and s6 edge, g925f, hence all my warnings earlier. anyways, i need a reefer and a scran after all this, God, allah, buddah i hope it helps someone.
Click to expand...
Click to collapse
Legendary post! Cheers mate you just made my morning. I knew the XDA guys would pull through.
I'm on my way to work, but I'll give it a crack later.
Cheers bud - Kudos
Not sure if my phone is a lost cause and only good as a door stop. My phone at one stage would only display a screen asking me to plug into smart switch to recover the phone so I tried that but smart switch wasn't happening. I downloaded the latest stock rom and installed it successfully via ODIN but now my phone will not get past the boot logo. I can only get into download mode, Any advise on if I can get my phone working again?
Thanks
Andrew
andrew88 said:
Not sure if my phone is a lost cause and only good as a door stop. My phone at one stage would only display a screen asking me to plug into smart switch to recover the phone so I tried that but smart switch wasn't happening. I downloaded the latest stock rom and installed it successfully via ODIN but now my phone will not get past the boot logo. I can only get into download mode, Any advise on if I can get my phone working again?
Thanks
Andrew
Click to expand...
Click to collapse
Bro, I've been there and this is why I made an account on xda to see if my s6 (G-920F) can be fixed in any way. Yesterday I had the same thing as you when I tried to re-flash the phone with its proper, latest stock-ROM (UK/EE Nougat 7.0). Given how it hadn't worked, the update attempt through Odin screaming a big "FAIL!" at me, I was afraid I had bricked it completely, so I proceeded to re-install TWRP with Odin by putting the phone in download mode. I wiped the phone again with TWRP and now I'm not sure what I have to do as I am stuck with the UK Nougat bootloader and nothing else on it.
Before this whole ordeal I had rooted the phone and unlocked the bootloader following some instructions from a Youtube video and successfully installed a nighty build of LineageOS, which was buggy as **** (couldn't answer calls, use data, use the camera and a ****ton of apps were just not working). Dumbly enough, I thought I could just remove it through a wipe and put something else back on it but oh was I wrong.
Right now I'd just want to get my phone back to working (like you), as I am out of a job and need to be able to take phone calls with a normal, working phone.
Sorry I couldn't be of much help, but yeah maybe a first step towards fixing it would be to flash TWRP recovery on it and through the terminal, see what bootloader version you have with the command "getprop ro.bootloader". At least you will know the version of the broken bootloader you're experiencing difficulties with and *hopefully* an actual dev from the forums will entertain themselves in trying to solve this noobish puzzle we've created for ourselves.
Seriously, if there is a dev ready to board this crazy adventure with us, please help.
My namesake or username is pretty much a clue to what got me into this position.
I wish it was that simple for me mate, I cant access the recovery menu, I've tried flashing various recovery options but cant boot into any of them. I'm certain I could fix the phone if I could get to recovery. I'm now leaning towards it being a hardware fault with my phone. As you have access to recovery I think you may have more luck with your phone.
TerribleChoices said:
Bro, I've been there and this is why I made an account on xda to see if my s6 (G-920F) can be fixed in any way. Yesterday I had the same thing as you when I tried to re-flash the phone with its proper, latest stock-ROM (UK/EE Nougat 7.0). Given how it hadn't worked, the update attempt through Odin screaming a big "FAIL!" at me, I was afraid I had bricked it completely, so I proceeded to re-install TWRP with Odin by putting the phone in download mode. I wiped the phone again with TWRP and now I'm not sure what I have to do as I am stuck with the UK Nougat bootloader and nothing else on it.
Before this whole ordeal I had rooted the phone and unlocked the bootloader following some instructions from a Youtube video and successfully installed a nighty build of LineageOS, which was buggy as **** (couldn't answer calls, use data, use the camera and a ****ton of apps were just not working). Dumbly enough, I thought I could just remove it through a wipe and put something else back on it but oh was I wrong.
Right now I'd just want to get my phone back to working (like you), as I am out of a job and need to be able to take phone calls with a normal, working phone.
Sorry I couldn't be of much help, but yeah maybe a first step towards fixing it would be to flash TWRP recovery on it and through the terminal, see what bootloader version you have with the command "getprop ro.bootloader". At least you will know the version of the broken bootloader you're experiencing difficulties with and *hopefully* an actual dev from the forums will entertain themselves in trying to solve this noobish puzzle we've created for ourselves.
Seriously, if there is a dev ready to board this crazy adventure with us, please help.
My namesake or username is pretty much a clue to what got me into this position.
Click to expand...
Click to collapse
andrew88 said:
I wish it was that simple for me mate, I cant access the recovery menu, I've tried flashing various recovery options but cant boot into any of them. I'm certain I could fix the phone if I could get to recovery. I'm now leaning towards it being a hardware fault with my phone. As you have access to recovery I think you may have more luck with your phone.
Click to expand...
Click to collapse
Oh dear.
Yeah it does sound like something got deeply ****ed up in this case. I had the luck to somehow get past the smart switch error when the phone died of low battery. As I attached it to the charger I quickly boot it into download mode before the screen would become a bootloop again and that's where I was able to reinstall the latest version of TWRP recovery. After that, I was able to flash a stock ROM of Nougat that didn't have a ****ed up bootloader like I had. Specifically the one from this thread: https://forum.xda-developers.com/galaxy-s6/help/device-5-binary-3-s6-sm-g920f-t3706025
by forumber2.
It's the Netherlands stock-ROM. Not sure if you're from the US and the carrier would be wrong with that CSC, but it was a good bet for me. I got my phone back to working normally now.
Worst case scenario I'd say see if you have a phone repair shop nearby and ask them an opinion on what could be wrong. I'm just an amateur like you.
Still, I wish you the best of luck with it. Maybe there's still some hope. :/