my p920 was bricked i tried to unbrick it but now an issue exists and can't continue unbricking it ...
i successfully flashed a recovery "TeamWin" and while trying to installing any rom i have an error in the Verifying partition sizes "step" ...
assert failed: getprop("ro.product.device") == "E............
(Status 7)
[[Please refer to the attached error screenshot]]
BerayekZ said:
my p920 was bricked i tried to unbrick it but now an issue exists and can't continue unbricking it ...
i successfully flashed a recovery "TeamWin" and while trying to installing any rom i have an error in the Verifying partition sizes "step" ...
assert failed: getprop("ro.product.device") == "E............
(Status 7)
[[Please refer to the attached error screenshot]]
Click to expand...
Click to collapse
your are getting error becuase u need to remove the first line from updater script and u will be okay with falshinh
other solution
ok herre is your solution
flash the larger partation bin file for xbsall thread using the lg flash tool........and
b) install any official ics rom on top of it
u have 3 choice
xbsall v8
oprimusrs v6
and darkroom v4
Dont forget to press thanks if i have HELPED:good:
BerayekZ said:
my p920 was bricked i tried to unbrick it but now an issue exists and can't continue unbricking it ...
i successfully flashed a recovery "TeamWin" and while trying to installing any rom i have an error in the Verifying partition sizes "step" ...
assert failed: getprop("ro.product.device") == "E............
(Status 7)
[[Please refer to the attached error screenshot]]
Click to expand...
Click to collapse
If it's CM10 ROM I think you can open it and remove that line from the updater-script.
ptlsajan said:
your are getting error becuase u need to remove the first line from updater script and u will be okay with falshinh
other solution
ok herre is your solution
flash the larger partation bin file for xbsall thread using the lg flash tool........and
b) install any official ics rom on top of it
u have 3 choice
xbsall v8
oprimusrs v6
and darkroom v4
Dont forget to press thanks if i have HELPED:good:
Click to expand...
Click to collapse
i prefer to go with the first solution, but i need details about it where is that file exists ???
it didn't work ... and i noticed that every wipe i do , the final step is "verifying partition sizes" but i gives me success message , but i think that it is not succeeded but only exit so the system thinks that it is success!
hint : what i want is to rollback all changes has done to the phone and getting it back to the original rom developed by LG ...
BerayekZ said:
it didn't work ... and i noticed that every wipe i do , the final step is "verifying partition sizes" but i gives me success message , but i think that it is not succeeded but only exit so the system thinks that it is success!
hint : what i want is to rollback all changes has done to the phone and getting it back to the original rom developed by LG ...
Click to expand...
Click to collapse
Follow my 2nd solution to get to official ics from lg
Sent from my LG-P920 using xda premium
please provide the link for the rom to download it ... and can i install in while i am in fastboot mode or not ?
because the issue here is that i can't go to normal download mode ...
It seems i've stucked with another issue ... i flashed the XBSA404 using lg flash tool but normally failed at 27% ...
but now finally i have Normal download mode again ... 'Chinese i think' (attached) ... anyway I've tried to recover my phone using LG support tool with the recovery option ... but didn't work ... also when trying to update also another error (attached) ... what can i do now ???
BerayekZ said:
It seems i've stucked with another issue ... i flashed the XBSA404 using lg flash tool but normally failed at 27% ...
but now finally i have Normal download mode again ... 'Chinese i think' (attached) ... anyway I've tried to recover my phone using LG support tool with the recovery option ... but didn't work ... also when trying to update also another error (attached) ... what can i do now ???
Click to expand...
Click to collapse
Install Last Wpark Bootloader 1.25a And Recovery http://d-h.st/jLz
28brtlarge.rar (you can find it here) http://d-h.st/dxl
Download and extract it..
Take a BACKUP of your InternalSD DATA at your PC
Flash the BIN file with LG FLASHTOOL
Reboot
After it gets flashed PRESS VOLUME DOWN and POWER until the factory reset screen appears.
Factory Reset
After ANDROID starts go into your SETTINGS > STORAGE and ERASE INTERNAL MEMORY and restore your Internal SD Data from your PC
REBOOT to CWM RECOVERY
Install XBSAVR3D.ZIP (You can find it here http://forum.xda-developers.com/showthread.php?t=1963847
Reboot (Taken from XBSAL Guide and OptimusR)
Thank you all , it has been fixed , the LG flash tool hasflashed the rom XBSA404 successfully when i go to S/W mode
one more issue ... i'll be very happy if someone can download this file http://uploaded.net/file/4i8rcp80/ and upload it to any other good file sharing . because uploaded.net is very bad one i can't download the file from it ...
BerayekZ said:
my p920 was bricked i tried to unbrick it but now an issue exists and can't continue unbricking it ...
i successfully flashed a recovery "TeamWin" and while trying to installing any rom i have an error in the Verifying partition sizes "step" ...
assert failed: getprop("ro.product.device") == "E............
(Status 7)
[[Please refer to the attached error screenshot]]
Click to expand...
Click to collapse
Next time, Follow this guide to unbrick your phone, it worked for me !
http://forum.xda-developers.com/show....php?t=2246001
How to unlock the pattern lock on any android device with out loosing any data.
I had tried to flash with aroma file-manager.zip , but it did't work. I am getting below error message.
"error executing updater binary in zip '/sdcard /aroma.zip"
I have 2.8.5.0 TWRP version.
&I am using Micromax Yu Yureka now.
any one please help me.
subhash89s said:
How to unlock the pattern lock on any android device with out loosing any data.
I had tried to flash with aroma file-manager.zip , but it did't work. I am getting below error message.
"error executing updater binary in zip '/sdcard /aroma.zip"
I have 2.8.5.0 TWRP version.
&I am using Micromax Yu Yureka now.
any one please help me.
Click to expand...
Click to collapse
Hi,
Please check this http://forum.xda-developers.com/showthread.php?t=1800799
Good luck.
hi my ROOTED acer Z500 is stuck in system recovery mode. this happened after i update it. the title says
Android system recovery <3e>
Acer_AV0K0_Z500_1.003.00_AAP_GEN1 [/U][/I][/B]
i tried using all the OS from ”Download Drivers and Manuals | Acer Official Site“ but when i use "apply update from external storage" it says
——Install /sdcard...
Installing update...
This package is for "z500_la_gen1" sku；
this is a “z500_aap_gen1".
Installation aborted.
i also tried using custom ROM from online but it says :
——Install /sdcard...
Installation aborted.
i also went to the Acer Service & Support center, the staff says i violent the warranty so ya...
help please? :crying:
beishi1241 said:
hi my ROOTED acer Z500 is stuck in system recovery mode. this happened after i update it. the title says
Android system recovery <3e>
Acer_AV0K0_Z500_1.003.00_AAP_GEN1 [/U][/I][/B]
i tried using all the OS from ”Download Drivers and Manuals | Acer Official Site“ but when i use "apply update from external storage" it says
——Install /sdcard...
Installing update...
This package is for "z500_la_gen1" sku；
this is a “z500_aap_gen1".
Installation aborted.
i also tried using custom ROM from online but it says :
——Install /sdcard...
Installation aborted.
i also went to the Acer Service & Support center, the staff says i violent the warranty so ya...
help please? :crying:
Click to expand...
Click to collapse
Hi ,
Thanks for using xda assist. If you look at below :
Code:
This package is for "z500_la_gen1" sku；
It says the package is for different phone and not for
Code:
“z500_aap_gen1"
. So please make sure you flash a correct file.
For more info , see this : http://forum.xda-developers.com/android/development/guide-firmwares-roms-cwm-root-acer-mtk-t2945933
Hello everyone Good day!
My phone is Honor 9i RNE-l22, unlock
So I'm done flashing this rom ( https://forum.xda-developers.com/ho...rrection-remix8-1-gsi-treble-project-t3807126 ) and it successfully installed, after booting the rom (it boots really fast) i notice that i forgot to flash gapps,
so what i did is download the gapps and when i reboot my phone to recovery to flash gapps, i get this error.
"ERROR MODE
Attention!
Please update system again
Error!
Func NO : 10(recovery images)
Error NO : 2(load failed!)"
Can someone help me thru this?
Note:
*I cant boot to TWRP but I can boot to erecovery
*I already tried the dload method but it stops at 5% and go back to the error again
*I try to install this rom (rr rom) again but it goes back to the same error again
*I even try the OpenKirin rom but it still the same
Hope that someone help me to fix this, Thank you so much!
https://forum.xda-developers.com/honor-9i/development/to-emui-unbrick-t3810736 check this thread
sknoman1 said:
https://forum.xda-developers.com/honor-9i/development/to-emui-unbrick-t3810736 check this thread
Click to expand...
Click to collapse
Thanks for your response, I really appreciate it,
I already fixed my problem
I just extracted the KERNEL.img from update.app and flash it in fastboot mode.
Guys please help me i have xiaomi mi a2 lite whit twrp 3.5.0_9 installed and unlocked bootloader i downloaded android 11 rom link: https://forum.xda-developers.com/t/rom-11-0-daisy-aosp-11-0.4167961/. When i go to recovery mode i flash the rom and appears this error: Updater process ended whit error: 1 to flash additional zips please reboot recovery to switch to the updated slots. Error installing zip file rom.zip. please help me.
THANKS
I solved by using havoc os 4.1