I bought a xperia xa ultra .after i update it whith new room 6.01 whith flash tool .it take brick.and when i flash with flash tool this message is shown. Device connected with usb debbug off.and my phone is not any reaction .just red light when it conected whith pc.help please .why sony company generate brick phone
pourya007 said:
I bought a xperia xa ultra .after i update it whith new room 6.01 whith flash tool .it take brick.and when i flash with flash tool this message is shown. Device connected with usb debbug off.and my phone is not any reaction .just red light when it conected whith pc.help please .why sony company generate brick phone
Click to expand...
Click to collapse
You only need to charge your phone, it still ''alive'' and then re flash again. The brick probably was caused 'cause you flashed the rom without enough battery
Related
Hello!
Last night I flashed Xperia L C2105 with stock rom which I found here.
Flasing finished without any error but when I try to turn the phone on it only giving me one short vibrate and black screen... after 3sec I can press and hold power button again and again short vibrate and black screen... No SONY logo... no Xperia logo.
When I connect phone to charger red LED is blinking, I tried different battery but result was the same.
I can still connect to device in flash mode and fastboot mode... via FlashTool.
Any help will be appropriated.
Have you tried flashing via Sony PC Companion ?
radelwow said:
Have you tried flashing via Sony PC Companion ?
Click to expand...
Click to collapse
Yes... I tried that.
It looks like it was my fault... I flashed .ftf while battery level was under 10%
Phone is bricked and I lost interest in fixing this phone.
Thanks for your time to replay to my post
If your phone is connecting in flashmode, so what about flashing stock rom ftf via Flashtool ? Something like this http://forum.xda-developers.com/showthread.php?t=2338074 or this http://forum.xda-developers.com/showthread.php?t=2356876 ? Have you tried it ?
majster-pl said:
Yes... I tried that.
It looks like it was my fault... I flashed .ftf while battery level was under 10%
Phone is bricked and I lost interest in fixing this phone.
Thanks for your time to replay to my post
Click to expand...
Click to collapse
So what are you planning to do...
Hit the thanks button..it does not cost you anything.
it's worth something for me...
sent from my Sony Xperia e dual
My Sony Xperia M2 dual D2302 Is Unable To Boot Into Flash Mode..Drivers Are Installed...The Phone Boots Into Fastboot Mode
But When I Try To Connect Into Flashmode The Green Light Blinks For A Sec And Goes Off...What Problem Should It Be
M Running 4.4.4 and want to downgrade to 4.4.2...Why I Am Not Able To Boot Into Flashmode...Fastboot Mode Is Working
Dont worry That
shaikhnabil4 said:
My Sony Xperia M2 dual D2302 Is Unable To Boot Into Flash Mode..Drivers Are Installed...The Phone Boots Into Fastboot Mode
But When I Try To Connect Into Flashmode The Green Light Blinks For A Sec And Goes Off...What Problem Should It Be
M Running 4.4.4 and want to downgrade to 4.4.2...Why I Am Not Able To Boot Into Flashmode...Fastboot Mode Is Working
Click to expand...
Click to collapse
its not a problem.when the green light comes, its okay.that means you can flash.Dont worry if it goes off.Just connect and flash the firmware. (When you click the flash button , flashtool is going to start normally , but you probably cant see any green loader.Dont worry that to.wait until flashtool says flashing finish. it may took 10 minutes.)
Got it solved?
shaikhnabil4 said:
My Sony Xperia M2 dual D2302 Is Unable To Boot Into Flash Mode..Drivers Are Installed...The Phone Boots Into Fastboot Mode
But When I Try To Connect Into Flashmode The Green Light Blinks For A Sec And Goes Off...What Problem Should It Be
M Running 4.4.4 and want to downgrade to 4.4.2...Why I Am Not Able To Boot Into Flashmode...Fastboot Mode Is Working
Click to expand...
Click to collapse
Hi,
I am having the same issue. The green light goes off and the flashtool is not detecting the phone (xperia m2 dual) in flashmode. If you have got it resolved, please let me know.
issue solved
Connect One End Of Usb 2 Ur PC...open flashtool select ur ftf....Click on flash...Wen the menu will appear showing the animation of connecting ur phone into flashmode...at dat tym u hav 2 connect ur phone..ur ftf will be flashed...
DO NOT CONNECT UR PHONE UNTIL THE MENU SHOWING THE ANIMATION OF FLASHMODE APPEARS
im also having same problem,
now i've cyanogenmod, but i ant to revert back to stock, plz sombdy send me stock backup form cwm or twrp... thnx.
Help if you can
Sony Xperia M2 dual D2302
How to unlock xperia m2 dual bootloader ,coz in sony official page no space for 2nd IMEI number. can it be done by flashtool??
It doesn't need the 2nd imei no just use the first one as far as I'm aware
D2303 18.3.1.C.1.15 kk deodexed, rooted, philz touch recovery, xposed, z1 bravia engine 2 + x-reality+ z3 super vivid, viper audio
markandeyp said:
Hi,
I am having the same issue. The green light goes off and the flashtool is not detecting the phone (xperia m2 dual) in flashmode. If you have got it resolved, please let me know.
Click to expand...
Click to collapse
it means your are in flash mod
Rajput1690 said:
it means your are in flash mod
Click to expand...
Click to collapse
Hello @Rajput1690 ,@ shaikhnabil4 @markandeyp an others Im having same issue of falshmode not being recognized and GREEN LED going OFF after 1 sec or so.
did you guys find any solution? were you able to flash any ftf?
please suggest.
EDITED: I found that bcoz of 3rd party USB cable i wasn't able to get into flash mode(though fastboot,USB data transfer work using 3rd party cable)
Now I'm able to fully restore the device with all functionalities working as usual, I'm so relieved now
Hi i bought this phone without knowing it is prototype from ebay. The phone is freeze at Sony boot logo.Does anybody knows where can i get the firmware for the prototype models. Xperia XA Dual F3116. Thks in advance.
Have you tried with regular firmware from Xperifirm? We can swith our retail phone to prototype just by editing build.prop or default.prop, it may be the same for you.
Thks for replying me.how can i do that? could u pls provide me the guides..Thks..
Did you manage to flash retail firmware onto your prototype?
i tried flashing retail firmware,it freeze at xperia logo.i'm really confused.i dont know what i'm going to do next.I had 2 sets of Xperia XA dual (prototype)which i ordered from ebay.. 1st set bricked due to flashing using retail firmware.Before that i had Xperia C4 e5353. The phone is dead due to flashing using flashtool. Bricked.. Red light light up when usb is inserted.I believe Mediatek is not suitable using flashtool.
Maybe because retail firmware have "ro.build.type=user" in the default.prop. Try to dump the boot.img from your working proto and flash it on the other or unpack boot from my rootpack for your model and add/edit "ro.buid.type=eng" to the default.prop in the ramdisk.
Sorry due to my busy working schedule. Total i had 2 XA Dual 3116. 1 bricked & 1 previously i flash to retail it goes bootloop.After a long time i leave the bootloop phone in a drawer,i wanted to dump the boot.img. The bootloop phone cant on at all.Tried to charge,only red light on the led.I've charged 1 whole day.The phone doesn't boot up at all.Every 40 secs the phone automatically detect & cut out when i connected to the pc.When i check the driver it shows MediaTek UsB Port. I tried again flashing the retail firmware. Flashtool cant detect the phone.The led red light stays. I believe both phone are now bricked.How am i gonna dump the boot.img if both phone are bricked?
On your "dead" device, if you hold "vol-" for the 40 sec (reboot) while plugged have you the green led or the blue one by holding "vol+" instead?
For the other device, try to find a firmware for "prototype" but I don't know where
Or try that i said before: unpack boot from my rootpack for your model and add/edit "ro.buid.type=eng" to the default.prop in the ramdisk, repack and flash with fastboot command.
If I do that on my "retail" device, in "settings"->"anonymous data", it will show "prototype".
EDIT: I'm more sure it can work look this comment: http://forum.xda-developers.com/showpost.php?p=69478926&postcount=6
In some "rootpack" I forgot to revert back setting "ro.build.type=eng" to default "user" and it worked to root on a "prototype" device!
Hi, I have Sony Xperia C2305 doesn't work after unsoccessful encryption and then the phone stuck in Sony logo, I tried every solutions to fix it but nothing happens and now the phone didn't work. When I connect the phone to pc after install the drivers or even connecting to charge the phone, the red light appears without any blinking especially when I press power button and down vol button nothing happens and the screen doesn't shows anything. What can I do?
Sorry for the language.
Hello friend it's most probably a hard brick. You can use xperia flash tool to flash stock rom of your device and your device will get unbricked. It's very easy to install stock rom of xperia c2305 and flash tool because bothare easily available on the internet. So best of luck
Hello there. I want to repair software on my Xperia Z5 E6653 with Xperia Companion. But when it asks me to hold down key and connect the phone, nothing happens, and maybe after half of minute it disconnets from flash mode and boots normally. I bought a motherboard and I think it came with some custom firmware sh.... Just want to have official system. Also main back camera isn't working. Can someone help with that? I never encountered something like disconnecting from flash with my Z3, so I suppose some flash tool will be useless too. Can be used the opportunity of "normally working" system?